hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
49,043 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

17294 Commits (77598f19cc08a421f927979b3e85f7f18b8f9648)

Author SHA1 Message Date
Piotr Dymacz 77598f19cc uboot-envtools: ath79: add support for ALFA Network AP121FE 
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
 2020-09-28 01:28:37 +02:00
Daniel Golle d96d324280 libsepol: break out chkcon utility 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2020-09-27 17:22:01 +01:00
Daniel Golle e8b34880f9 policycoreutils: fix host utils rpath and bin directory 
'setfiles' and others should be installed to $(STAGING_DIR_HOSTPKG)/bin
rather than $(...)/sbin which isn't in PATH.
Also using -Wl,-rpath to set library search location instead of setting
LD_LIBRARY_PATH when calling setfiles in image.mk.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2020-09-27 17:22:01 +01:00
Christian Lamparter f6fbc39706 build: define PWM_SUPPORT arch feature flag 
As the PWM has its own sub-system in the Linux kernel,
I think it should be handled in the same way as GPIO, RTC, PCI...

This patch introduces a specific feature flag "pwm" and the
"leds-pwm" kernel module as the first customer.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2020-09-25 19:32:33 +02:00
Hans Geiblinger a9071d02b5 ipq40xx: Add support for Linksys MR8300 (Dallas) 
The Linksys MR8300 is based on QCA4019 and QCA9888
and provides three, independent radios.
NAND provides two, alternate kernel/firmware images
with fail-over provided by the OEM U-Boot.

Hardware Highlights:

SoC: IPQ4019 at 717 MHz (4 CPUs)
RAM: 512MB RAM

SoC:	Qualcomm IPQ4019 at 717 MHz (4 CPUs)
RAM:	512M DDR3
FLASH:	256 MB NAND (Winbond W29N02GV, 8-bit parallel)
ETH:	Qualcomm QCA8075 (4x GigE LAN, 1x GigE Internet Ethernet Jacks)
BTN:	Reset and WPS
USB:	USB3.0, single port on rear with LED
SERIAL:	Serial pads internal (unpopulated)
LED:	Four status lights on top + USB LED
WIFI1:	2x2:2 QCA4019 2.4 GHz radio on ch. 1-14
WIFI2:  2x2:2 QCA4019 5 GHz radio on ch. 36-64
WIFI3:  2x2:2 QCA9888 5 GHz radio on ch. 100-165

Support is based on the already supported EA8300.
Key differences:
	EA8300 has 256MB RAM where MR8300 has 512MB RAM.
	MR8300 has a revised top panel LED setup.

Installation:
"Factory" images may be installed directly through the OEM GUI using
URL: https://ip-of-router/fwupdate.html (Typically 192.168.1.1)

Signed-off-by: Hans Geiblinger <cybrnook2002@yahoo.com>
[copied Hardware-highlights from EA8300. Fixed alphabetical order.
fixed commit subject, removed bogus unit-address of keys,
fixed author (used Signed-off-By to From:) ]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2020-09-25 19:31:51 +02:00
Tomasz Maciej Nowak e24635710c ipq40xx: add support for Luma Home WRTQ-329ACN 
Luma Home WRTQ-329ACN, also known as Luma WiFi System, is a dual-band
wireless access point.

Specification
SoC: Qualcomm Atheros IPQ4018
RAM: 256 MB DDR3
Flash: 2 MB SPI NOR
       128 MB SPI NAND
WIFI: 2.4 GHz 2T2R integrated
      5 GHz 2T2R integrated
Ethernet: 2x 10/100/1000 Mbps QCA8075
USB: 1x 2.0
Bluetooth: 1x 4.0 CSR8510 A10, connected to USB bus
LEDS: 16x multicolor LEDs ring, controlled by MSP430G2403 MCU
Buttons: 1x GPIO controlled
EEPROM: 16 Kbit, compatible with AT24C16
UART: row of 4 holes marked on PCB as J19, starting count from the side
      of J19 marking on PCB
      1. GND, 2. RX, 3. TX, 4. 3.3V
      baud: 115200, parity: none, flow control: none

The device supports OTA or USB flash drive updates, unfotunately they
are signed. Until the signing key is known, the UART access is mandatory
for installation. The difficult part is disassembling the casing, there
are a lot of latches holding it together.

Teardown
Prepare three thin, but sturdy, prying tools. Place the device with back
of it facing upwards. Start with the wall having a small notch. Insert
first tool, until You'll feel resistance and keep it there. Repeat the
procedure for neighbouring walls. With applying a pressure, one edge of
the back cover should pop up. Now carefully slide one of the tools to
free the rest of the latches.
There's no need to solder pins to the UART holes, You can use hook clips,
but wiring them outside the casing, will ease debuging and recovery if
problems occur.

Installation
1. Prepare TFTP server with OpenWrt initramfs image.
2. Connect to UART port (don't connect the voltage pin).
3. Connect to LAN port.
4. Power on the device, carefully observe the console output and when
   asked quickly enter the failsafe mode.
5. Invoke 'mount_root'.
6. After the overlayfs is mounted run:
     fw_setenv bootdelay 3
   This will allow to access U-Boot shell.
7. Reboot the device and when prompted to stop autoboot, hit any key.
8. Adjust "ipaddr" and "serverip" addresses in U-Boot environment, use
   'setenv' to do that, then run following commands:
     tftpboot 0x84000000 <openwrt_initramfs_image_name>
     bootm 0x84000000
   and wait till OpenWrt boots.
9. In OpenWrt command line run following commands:
     fw_setenv openwrt "setenv mtdids nand1=spi_nand; setenv mtdparts mtdparts=spi_nand:-(ubi); ubi part ubi; ubi read 0x84000000 kernel; bootm 0x84000000"
     fw_setenv bootcmd "run openwrt"
10. Transfer OpenWrt sysupgrade image to /tmp directory and flash it
    with:
     ubirmvol /dev/ubi0 -N ubi_rootfs
     sysupgrade -v -n /tmp/<openwrt_sysupgrade_image_name>
11. After flashing, the access point will reboot to OpenWrt, then it's
    ready for configuration.

Reverting to OEM firmware
1. Execute installation guide steps: 1, 2, 3, 7, 8.
2. In OpenWrt command line run following commands:
     ubirmvol /dev/ubi0 -N rootfs_data
     ubirmvol /dev/ubi0 -N rootfs
     ubirmvol /dev/ubi0 -N kernel
     ubirename /dev/ubi0 kernel1 kernel ubi_rootfs1 ubi_rootfs
     ubimkvol /dev/ubi0 -S 34 -N kernel1
     ubimkvol /dev/ubi0 -S 320 -N ubi_rootfs1
     ubimkvol /dev/ubi0 -S 264 -N rootfs_data
     fw_setenv bootcmd bootipq
3. Reboot.

Known issues
The LEDs ring doesn't have any dedicated driver or application to control
it, the only available option atm is to manipulate it with 'i2cset'
command. The default action after applying power to device is spinning
blue light. This light will stay active at all time. To disable it
install 'i2c-tools' with opkg and run:
 i2cset -y 2 0x48 3 1 0 0 i
The light will stay off until next cold boot.

Additional information
After completing 5. step from installation guide, one can disable asking
for root password on OEM firmware by running:
 sed -e 's/root❌/root::/' -i /etc/passwd
This is useful for investigating the OEM firmware. One can look
at the communication between the stock firmware and the vendor's
cloud servers or as a way of making a backup of both flash chips.
The root password seems to be constant across all sold devices.
This is output of 'led_ctl' from OEM firmware to illustrate
possibilities of LEDs ring:

Usage: led_ctl [status | upgrade | force_upgrade | version]
       led_ctl solid    COLOR <brightness>
       led_ctl single   COLOR INDEX <brightness 0 - 15>
       led_ctl spinning COLOR <period 1 - 16 (lower = faster)>
       led_ctl fill     COLOR <period 1 - 16 (lower = faster)>
                                             ( default is 5 )
       led_ctl flashing COLOR <on dur 1 - 128>  <off dur 1 - 128>
                              (default is  34)  ( default is 34 )
       led_ctl pulsing  COLOR
COLOR: red, green, blue, yellow, purple, cyan, white

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
[squash "ipq-wifi: add BDFs for Luma Home WRTQ-329ACN" into commit,
changed ubi volumes for easier integration, slightly reworded
commit message, changed ubi volume layout to use standard names all
around]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 2020-09-25 19:30:19 +02:00
Yousong Zhou 7dc78d1d28 dnsmasq: fix handling ignore condition for dnssec 
It should return false to indicate that the option should not be ignored

Fixes 064dc1e8 ("dnsmasq: abort when dnssec requested but not
available")

Reported-by: Sami Olmari <sami@olmari.fi>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
 2020-09-25 10:31:36 +08:00
W. Michael Petullo d20007ce91 dnsmasq: support tftp_unique_root in /etc/config/dhcp 
The TFTP server provided by dnsmasq supports serving a select boot image
based on the client's MAC or IP address. This allows an administrator
to activate this feature in /etc/config/dhcp. Here is an example
/etc/config/dhcp that configures dnsmasq with --tftp-unique-root=mac:

...

config dnsmasq
	option enable_tftp 1
	option tftp_root /usr/libexec/tftpboot
	option tftp_unique_root mac

config boot router
	option serveraddress 192.168.1.1
	option servername tftp.example.com
	option filename openwrt-initramfs-kernel.bin

...

With this configuration, dnsmasq will serve
/usr/libexec/tftpboot/00-11-22-33-44-55/openwrt-initramfs-kernel.bin to
the client with MAC address 00:11:22:33:44:55.

Signed-off-by: W. Michael Petullo <mike@flyn.org>
 2020-09-24 22:38:37 +02:00
Hans Dedecker ad3044c424 vxlan: fix rsc config option 
Fix route short circuit config option; fixes commit 036221ce5a

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
 2020-09-24 22:14:36 +02:00
Hans Dedecker 036221ce5a vxlan: add extra config options 
Add config options:
  srcportmin/srcportmax : range of port numbers to use as  UDP source ports
                          to communicate to the remote VXLAN tunnel endpoint
  ageing                : lifetime in seconds of FDB entries learnt by the kernel
  maxaddress            : maximum number of FDB entries
  learning              : enable/disable entering unknown source link layer addresses
                          and IP addresses into the VXLAN device FDB.
  rsc                   : enable/disable route short circuit
  proxy                 : enable/disable ARP proxy
  l2miss                : enable/disable netlink LLADDR miss notifications
  l3miss                : enable/disable netlink IP ADDR miss notifications
  gbp                   : enable/disable the Group Policy extension

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
 2020-09-23 21:45:15 +02:00
J. Scott Heppler 620f9c7734 ramips: add support for Linksys EA7300 v2 
This submission relied heavily on the work of
Santiago Rodriguez-Papa <contact at rodsan.dev>

Specifications:

*  SoC:            MediaTek  MT7621A            (880  MHz  2c/4t)
*  RAM:            Winbond W632GG6MB-12         (256M  DDR3-1600)
*  Flash:          Winbond W29N01HVSINA         (128M  NAND)
*  Eth:            MediaTek  MT7621A            (10/100/1000  Mbps  x5)
*  Radio:          MT7603E/MT7615N              (2.4  GHz  &  5  GHz)
                     4  antennae:  1  internal  and  3  non-deatachable
*  USB:            3.0  (x1)
*  LEDs:
          White    (x1  logo)
          Green    (x6  eth  +  wps)
          Orange   (x5,  hardware-bound)
*  Buttons:
          Reset    (x1)
          WPS      (x1)

Installation:

Flash factory image through GUI.

This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.

Reverting to factory firmware:

Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.

Signed-off-by: J. Scott Heppler <shep971@centurylink.net>
 2020-09-23 12:17:32 +02:00
Felix Fietkau 127ca3c631 mt76: update to the latest version 
73301065ac32 mt76: mt7615: reduce maximum VHT MPDU length to 7991
8c47ed12c2be mt76: mt7915: add offchannel condition in switch channel command
1449e602fa10 mt76: Convert to DEFINE_SHOW_ATTRIBUTE
b22977c2727d mt76: mt7663s: remove max_tx_fragments limitation

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2020-09-23 08:39:26 +02:00
Felix Fietkau 4bd7689d85 mac80211: update sta connection monitor regression fix 
Reset the connection monitor on all acked frames

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2020-09-23 08:39:26 +02:00
David Bauer c5eea362f3 hostapd: ubus: make (B)SSID optional for neighbor report 
Make the BSSID and SSID fields optional when configuring a neighbor
report into hostapd.

Both options can now be an empty string. For the BSSID, the first 6 byte
are copied from the neighbor report. For the SSID, the SSID for the
affected hostapd BSS is used.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-22 17:41:10 +02:00
David Bauer 560e54c69e hostapd: ubus: send notification instead of event 
Rafal Milecki pointed out that ubus events are meant for low-level ubus
events only (e.g. addition or removal of an object). Higher level
events should happen as notifications on the ubus object itself.

Dispatch BSS events on the main hostapd ubus object instead of
publishing them as ubus events.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-22 17:40:08 +02:00
David Bauer d643b10a76 hostapd: ubus: fix infinite loop when configuring RRM NR 
The return-code was set, however it was never returned, nor was
the loop interrupted.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-21 21:27:56 +02:00
David Bauer 8e7aa739fb hostapd: send procd event on BSS update 
Dispatch ubus events also to procd in order to trigger service reloads
on hostapd updates.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-21 21:26:27 +02:00
David Bauer 6254af0c37 hostapd: send ubus event on BSS update 
hostapd will emit a ubus event with the eventname hostapd.<ifname>.<event>
when adding, removing or reloading a BSS.

This way, services which install state (for example the RMM neighbor
list) can on-demand reinstall this information for the BSS without
polling this state.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-21 21:26:12 +02:00
Stijn Segers ec80139629 odhcpd: number UCI defaults script 
UCI defaults scripts are supposed to be numbered, but odhcpd's lacked numbering, which
turned out to mess up my custom scripts numbered 9[0-9]_*. The idea is to have high number
(custom) scripts executed last. Jow confirmed numbering is the default case, not the
exception (thanks).

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
 2020-09-21 20:59:40 +02:00
Daniel Golle 236e79abb7 policycoreutils: fix ALTERNATIVES install location 
Fixes: 7817c831ef ("policycoreutils: break into smaller packages")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2020-09-21 18:58:14 +01:00
Daniel Golle 7817c831ef policycoreutils: break into smaller packages 
Instead of vaguely describing dependencies in the package description
actually split-up into individual packages, each with their
dependencies expressed accurately.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2020-09-21 18:40:38 +01:00
Daniel Golle 81d895d1f1 libselinux: split utility packages and add PKG_LICENSE 
Split utility packages similar to coreutils in packages feed, adding
ALTERNATIVES for those which are also provided by busybox-selinux.
Also add missing license information.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 2020-09-21 18:40:38 +01:00
Felix Fietkau 1c6d45644a mac80211: fix regression in station connection monitor optimization 
When the nulldata frame was acked, the probe send count needs to be reset,
otherwise it will keep increasing until the connection is considered dead,
even though it fine.

Reported-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2020-09-21 17:56:31 +02:00
Rui Salvaterra 90853439a1 zram-swap: explicitly use mkswap/swapon/swapoff from /sbin 
The required BusyBox applets are enabled by default, so we can rely on them
being present in the system. This way, we make sure there are no conflicts
with less featured variants of these same applets which might also be
present in the system.

Fixes: 0bd7dfa3ed ("zram-swap: enable swap discard")

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[wrap commit description]
Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-20 17:52:25 +02:00
Davide Fioravanti cd36c0d2f0 mac80211: select the first available channel for 5GHz interfaces 
Some 5GHz wifi interfaces, especially in Tri-band routers, can't use
channel 36. In these cases, the default configuration for 5GHz
interfaces, once enabled, doesn't work.

This patch selects the first non-disabled channel for 5GHz interfaces.

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
 2020-09-20 17:52:25 +02:00
David Woodhouse 9e7369d37e mediatek: mt7623n-preloader: add preloader for Banana Pi R64 
We want to be able to make full system images for this system too, just
as we now can for the MT7623 platforms.

The package directory (mt7623n) is now a bit misnamed as it's overly
specific, but the precise set of platforms which we support this way
is evolving and we'll fix it up when the dust settles and we know what
nomenclature makes most sense.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
 2020-09-19 13:39:29 +01:00
Andre Heider 8cfb839907 arm-trusted-firmware-mvebu: add support for espressobin 
Use build variants to cover all 11 hardware options [0]:
espressobin-512mb
espressobin-v3-v5-1gb-1cs
espressobin-v3-v5-1gb-1cs-emmc
espressobin-v3-v5-1gb-2cs
espressobin-v3-v5-1gb-2cs-emmc
espressobin-v3-v5-2gb
espressobin-v3-v5-2gb-emmc
espressobin-v7-1gb
espressobin-v7-1gb-emmc
espressobin-v7-2gb
espressobin-v7-2gb-emmc

CLOCKSPRESET is set to CPU_800_DDR_800 for all builds, which is the only
stable configuration. That actually matches what Globalscale shipped as
CPU_1000_DDR_800 combined with kernel versions < v4.19.42. [1][2].

[0] https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/marvell/armada/build.rst
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8db82563451f976597ab7b282ec655e4390a4088
[2] https://forum.armbian.com/topic/10335-espressobin-update-to-585-results-in-kernel-panic/?tab=comments#comment-79916

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:06 +02:00
Andre Heider f6378b9e53 arm-trusted-firmware-mvebu: update a3700-utils 
Update to current head of the branch A3700_utils-armada-18.12-fixed:
0967979 ddr: Add DDR3 2CS layout for EspressoBin v5 2GB board
486523e ddr: fix typo for ESPRESSObin 2GB layout
490b2b3 TBB: Fix building for Crypto++ 6.0 and later
0141dd1 TBB: Split INCDIR from LIBDIR

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:06 +02:00
Andre Heider 65c1c91942 arm-trusted-firmware-mvebu: update to v2.3 
Switch to release tarballs and add missing license information while
here.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:06 +02:00
Andre Heider 75e9d8e6e7 arm-trusted-firmware-mvebu: install to own subdir 
Lift the dependency on the build order, where flash-image.bin may be missing
from the u-boot dir.

While at it, also install the uart images for rescue purposes.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:06 +02:00
Andre Heider 53065b2dee arm-trusted-firmware-mvebu: fix compiler spam 
Gets rid of these warnings:
cc1: note: someone does not honour COPTS correctly, passed 0 times

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:06 +02:00
Andre Heider 847b5927c6 arm-trusted-firmware-mvebu: reuse default prepare target 
Don't wipe internal state files, fixes e.g. refreshing patches.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:05 +02:00
Andre Heider 72bb66caad uboot-mvebu: add support for espressobin 
This builds two u-boot binaries: one for boards without eMMC and one
with.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:05 +02:00
Andre Heider ae2e521b34 uboot-mvebu: update to v2020.10-rc4 
TODO: switch to release v2020.10 once released.

Remove one merged patch, refresh the rest.

Signed-off-by: Andre Heider <a.heider@gmail.com>
 2020-09-18 21:42:05 +02:00
Tony Ambardar 5582fbd613 bpftools: support NLS, fix ppc build and update to 5.8.9 
With global NLS support enabled (CONFIG_BUILD_NLS), the linked libelf.so
and libbfd.so libraries will depend on libintl.so. Import the nls.mk helper
to set library prefixes and flags accordingly, and also conditionally add
"-lintl" as link-time library.

Fix a build error on ppc due to a EDEADLOCK redefinition in errno.h.

Use upstream stable kernel 5.8.9, and fix overriding of feature detection
to only allow/hide detected features. Also refresh existing patches.

Fixes: 2f0d672088 ("bpftools: add utility and library packages supporting
eBPF usage")

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
 2020-09-18 21:42:05 +02:00
Tan Zien e826e00765 firmware: intel-microcode: update to 20200616 
intel-microcode (3.20200616.1)

  * New upstream microcode datafile 20200616
    + Downgraded microcodes (to a previously shipped revision):
      sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376
      sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376
  * Works around hangs on boot on Skylake-U/Y and Skylake Xeon E3,
  * This update *removes* the SRBDS mitigations from the above processors
  * Note that Debian had already downgraded 0x406e3 in release 3.20200609.2

intel-microcode (3.20200609.2)

  * REGRESSION FIX: 0x406e3: rollback to rev 0xd6 and document regression
    * Microcode rollbacks (closes: LP#1883002)
      sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376
    * THIS REMOVES THE SECURITY FIXES FOR SKYLAKE-U/Y PROCESSORS
    * Avoid hangs on boot on (some?) Skylake-U/Y processors,
  * ucode-blacklist: blacklist models 0x8e and 0x9e from late-loading,
    just in case.  Note that Debian does not do late loading by itself.
    Refer to LP#1883002 for the report, 0x806ec hangs upon late load.

intel-microcode (3.20200609.1)

  * SECURITY UPDATE
    * For most processors: SRBDS and/or VRDS, L1DCES mitigations depending
      on the processor model
    * For Skylake HEDT and Skylake Xeons with signature 0x50654: VRDS and
      L1DCES mitigations, plus mitigations described in the changelog entry
      for package release 3.20191112.1.
    * Expect some performance impact, the mitigations are enabled by
      default.  A Linux kernel update will be issued that allows one to
      selectively disable the mitigations.
  * New upstream microcode datafile 20200609
    * Implements mitigation for CVE-2020-0543 Special Register Buffer Data
      Sampling (SRBDS), INTEL-SA-00320, CROSSTalk
    * Implements mitigation for CVE-2020-0548 Vector Register Data Sampling
      (VRDS), INTEL-SA-00329
    * Implements mitigation for CVE-2020-0549 L1D Cache Eviction Sampling
      (L1DCES), INTEL-SA-00329
    * Known to fix the regression introduced in release 2019-11-12 (sig
      0x50564, rev. 0x2000065), which would cause several systems with
      Skylake Xeon, Skylake HEDT processors to hang while rebooting
    * Updated Microcodes:
      sig 0x000306c3, pf_mask 0x32, 2019-11-12, rev 0x0028, size 23552
      sig 0x000306d4, pf_mask 0xc0, 2019-11-12, rev 0x002f, size 19456
      sig 0x00040651, pf_mask 0x72, 2019-11-12, rev 0x0026, size 22528
      sig 0x00040661, pf_mask 0x32, 2019-11-12, rev 0x001c, size 25600
      sig 0x00040671, pf_mask 0x22, 2019-11-12, rev 0x0022, size 14336
      sig 0x000406e3, pf_mask 0xc0, 2020-04-27, rev 0x00dc, size 104448
      sig 0x00050653, pf_mask 0x97, 2020-04-24, rev 0x1000157, size 32768
      sig 0x00050654, pf_mask 0xb7, 2020-04-24, rev 0x2006906, size 34816
      sig 0x00050656, pf_mask 0xbf, 2020-04-23, rev 0x4002f01, size 52224
      sig 0x00050657, pf_mask 0xbf, 2020-04-23, rev 0x5002f01, size 52224
      sig 0x000506e3, pf_mask 0x36, 2020-04-27, rev 0x00dc, size 104448
      sig 0x000806e9, pf_mask 0x10, 2020-04-27, rev 0x00d6, size 103424
      sig 0x000806e9, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424
      sig 0x000806ea, pf_mask 0xc0, 2020-04-27, rev 0x00d6, size 103424
      sig 0x000806eb, pf_mask 0xd0, 2020-04-27, rev 0x00d6, size 103424
      sig 0x000806ec, pf_mask 0x94, 2020-04-23, rev 0x00d6, size 103424
      sig 0x000906e9, pf_mask 0x2a, 2020-04-23, rev 0x00d6, size 103424
      sig 0x000906ea, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400
      sig 0x000906eb, pf_mask 0x02, 2020-04-23, rev 0x00d6, size 103424
      sig 0x000906ec, pf_mask 0x22, 2020-04-27, rev 0x00d6, size 102400
      sig 0x000906ed, pf_mask 0x22, 2020-04-23, rev 0x00d6, size 103424
  * Restores the microcode-level fixes that were reverted by release
    3.20191115.2 for sig 0x50654 (Skylake Xeon, Skylake HEDT)

intel-microcode (3.20200520.1)

  * New upstream microcode datafile 20200520
    + Updated Microcodes:
      sig 0x000206d6, pf_mask 0x6d, 2020-03-04, rev 0x0621, size 18432
      sig 0x000206d7, pf_mask 0x6d, 2020-03-24, rev 0x071a, size 19456

intel-microcode (3.20200508.1)

  * New upstream microcode datafile 20200508
    + Updated Microcodes:
      sig 0x000706e5, pf_mask 0x80, 2020-03-12, rev 0x0078, size 107520
    * Likely fixes several critical errata on IceLake-U/Y causing system
      hangs

intel-microcode (3.20191115.2)

  * Microcode rollbacks (closes: #946515, LP#1854764):
    sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792
  * Avoids hangs on warm reboots (cold boots work fine) on HEDT and
    Xeon processors with signature 0x50654.

intel-microcode (3.20191115.1)

  * New upstream microcode datafile 20191115
    + Updated Microcodes:
      sig 0x000406e3, pf_mask 0xc0, 2019-10-03, rev 0x00d6, size 101376
      sig 0x000506e3, pf_mask 0x36, 2019-10-03, rev 0x00d6, size 101376
      sig 0x000806e9, pf_mask 0x10, 2019-10-15, rev 0x00ca, size 100352
      sig 0x000806e9, pf_mask 0xc0, 2019-09-26, rev 0x00ca, size 100352
      sig 0x000806ea, pf_mask 0xc0, 2019-10-03, rev 0x00ca, size 100352
      sig 0x000806eb, pf_mask 0xd0, 2019-10-03, rev 0x00ca, size 100352
      sig 0x000806ec, pf_mask 0x94, 2019-10-03, rev 0x00ca, size 100352
      sig 0x000906e9, pf_mask 0x2a, 2019-10-03, rev 0x00ca, size 100352
      sig 0x000906ea, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328
      sig 0x000906eb, pf_mask 0x02, 2019-10-03, rev 0x00ca, size 100352
      sig 0x000906ec, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 99328
      sig 0x000906ed, pf_mask 0x22, 2019-10-03, rev 0x00ca, size 100352
      sig 0x000a0660, pf_mask 0x80, 2019-10-03, rev 0x00ca, size 91136

intel-microcode (3.20191113.1)

  * New upstream microcode datafile 20191113
    + SECURITY UPDATE, refer to the 3.20191112.1 changelog entry for details
      Adds microcode update for CFL-S (Coffe Lake Desktop)
      INTEL-SA-00270, CVE-2019-11135, CVE-2019-0117
    + Updated Microcodes (previously removed):
      sig 0x000906ec, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328

intel-microcode (3.20191112.1)

  * New upstream microcode datafile 20191112
    + SECURITY UPDATE
      - Implements MDS mitigation (TSX TAA), INTEL-SA-00270, CVE-2019-11135
      - Implements TA Indirect Sharing mitigation, and improves the
        MDS mitigation (VERW)
      - Fixes FIVR (Xeon Voltage Modulation) vulnerability, INTEL-SA-00271,
        CVE-2019-11139
      - Fixes SGX vulnerabilities and errata (including CVE-2019-0117)
    + CRITICAL ERRATA FIXES
      - Fixes Jcc conditional jump macro-fusion erratum (Skylake+, except
        Ice Lake), causes a 0-3% typical perforance hit (can be as bad
        as 10%).  But ensures the processor will actually jump where it
        should, so don't even *dream* of not applying this fix.
      - Fixes AVX SHUF* instruction implementation flaw erratum
    + Removed Microcodes:
      sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304
    + New Microcodes:
      sig 0x000406d8, pf_mask 0x01, 2019-09-16, rev 0x012d, size 84992
      sig 0x00050656, pf_mask 0xbf, 2019-09-05, rev 0x400002c, size 51200
      sig 0x00060663, pf_mask 0x80, 2018-04-17, rev 0x002a, size 87040
      sig 0x000706a8, pf_mask 0x01, 2019-08-29, rev 0x0016, size 74752
      sig 0x000706e5, pf_mask 0x80, 2019-09-05, rev 0x0046, size 102400
      sig 0x000a0660, pf_mask 0x80, 2019-08-27, rev 0x00c6, size 91136
    + Updated Microcodes:
      sig 0x000406e3, pf_mask 0xc0, 2019-08-14, rev 0x00d4, size 101376
      sig 0x00050654, pf_mask 0xb7, 2019-09-05, rev 0x2000065, size 34816
      sig 0x00050657, pf_mask 0xbf, 2019-09-05, rev 0x500002c, size 51200
      sig 0x000506e3, pf_mask 0x36, 2019-08-14, rev 0x00d4, size 101376
      sig 0x000706a1, pf_mask 0x01, 2019-08-28, rev 0x0032, size 73728
      sig 0x000806e9, pf_mask 0x10, 2019-08-14, rev 0x00c6, size 99328
      sig 0x000806e9, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 100352
      sig 0x000806ea, pf_mask 0xc0, 2019-08-14, rev 0x00c6, size 99328
      sig 0x000806eb, pf_mask 0xd0, 2019-08-14, rev 0x00c6, size 100352
      sig 0x000806ec, pf_mask 0x94, 2019-08-14, rev 0x00c6, size 100352
      sig 0x000906e9, pf_mask 0x2a, 2019-08-14, rev 0x00c6, size 100352
      sig 0x000906ea, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328
      sig 0x000906eb, pf_mask 0x02, 2019-08-14, rev 0x00c6, size 100352
      sig 0x000906ed, pf_mask 0x22, 2019-08-14, rev 0x00c6, size 99328
    + Updated Microcodes (previously removed):
      sig 0x00050653, pf_mask 0x97, 2019-09-09, rev 0x1000151, size 32768

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
 2020-09-18 20:08:51 +02:00
Tan Zien 182c7d955f firmware: amd64-microcode: update to 20191218 
amd64-microcode (3.20191218.1)

  * New microcode update packages from AMD upstream:
    + Removed Microcode updates (known to cause issues):
      sig 0x00830f10, patch id 0x08301025, 2019-07-11
  * README: update for new release

amd64-microcode (3.20191021.1)

  * New microcode update packages from AMD upstream:
    + New Microcodes:
      sig 0x00830f10, patch id 0x08301025, 2019-07-11
    + Updated Microcodes:
      sig 0x00800f12, patch id 0x08001250, 2019-04-16
      sig 0x00800f82, patch id 0x0800820d, 2019-04-16

amd64-microcode (3.20181128.1)

  * New microcode update packages from AMD upstream:
    + New Microcodes:
      sig 0x00800f82, patch id 0x0800820b, 2018-06-20

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
 2020-09-18 20:08:51 +02:00
Aleksander Jan Bajkowski b0aff40ae3 kernel: drop kmod-bmp085, kmod-bmp085-i2c and kmod-bmp085-spi 
CONFIG_BMP085* is replaced by CONFIG_BMP280 since 4.9[1] and this package is empty.
OpenWRT also has kmod-iio-bmp280* package and we can drop old packages.

1. [ misc: retire the old BMP085 driver ]
(832c8232dd (diff-5000d544d790c669405eb2a6775e5981))

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
 2020-09-18 20:08:51 +02:00
Tan Zien 4742ba41d0 kernel: add module support Intel Ethernet Controller I225 Series 
add kernel module igc support Intel Ethernet Controller I225 Series.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
 2020-09-18 20:08:51 +02:00
Felix Fietkau e18534f905 mt76: update to the latest version 
3b946a6dc588 mt76: dma: cache dma map address/len in struct mt76_queue_entry
c4c8b6a20d3b mt76: mt7915: fix HE BSS info
15391c1c947f mt76: fix tx hang on non-AQL frame limit
72c8a81e64e8 mt76: mt7915: fix encap offload multicast traffic with 4-address mode
69b3f868d14b mt76: mt7915: use napi_consume_skb to bulk-free tx skbs
5f080033ec7d mt76: move txwi handling code to dma.c, since it is mmio specific
b1f425686125 mt76: mt7915: fix VHT LDPC capability
8f48855f5d14 mt76: mt7915: simplify mt7915_lmac_mapping
cfaf40858718 mt76: mt7915: fix queue/tid mapping for airtime reporting
115b62efac21 mt76: remove retry_q from struct mt76_txq and related code
e22c65cdc585 mt76: mt7915: simplify checks for the 802.3 offload path
bab866a01e4f mt76: mt7915: fix unexpected firmware mode
0fc3c5eb61d0 mt76: dma: queue more rx frames internally before passing them to the stack
130e5de09364 Revert "mt76: dma: queue more rx frames internally before passing them to the stack"
e3af31409d41 update mt7915 firmware to the latest version
e2b8a4ec9891 mt76: testmode: add a limit for queued tx_frames packets
146488631f7b mt76: mt7615: Remove set but unused variable 'index'
0b7d2b76288e mt76: mt7615: fix VHT LDPC capability
848f4a6334a8 mt76: mt7622: fix fw hang on mt7622
0a955d944bd0 mt76: mt7663s: do not use altx for ctl/mgmt traffic
13b96411513b mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota
d62ba15b1bbf mt76: mt7663s: introduce __mt7663s_xmit_queue routine
fdf14d1b6aec mt76: move pad estimation out of mt76_skb_adjust_pad
d048f8e87ba0 mt76: mt7663s: fix possible quota leak in mt7663s_refill_sched_quota
979c0fdc5d27 mt76: mt7663s: introduce sdio tx aggregation
56e77a3a3ade mt76: mt7663: check isr read return value in mt7663s_rx_work
f96cffa03e57 mt76: mt7615: unlock dfs bands
1ccd31bbe1f4 mt76: Use fallthrough pseudo-keyword
448cd2d36ee2 mt76: mt76x0: Move tables used only by init.c to their own header file
17ba3432f5af Revert "mt76: mt7615: unlock dfs bands"
fee1f4a8e87f mt76: mt7915: fix possible memory leak in mt7915_mcu_add_beacon
5b78e5292777 mt76: Fix unsigned expressions compared with zero
ec84891a4d23 mt76: mt7915: convert to use le16_add_cpu()

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2020-09-18 17:29:04 +02:00
Rafał Miłecki 14247c82c0 rpcd: update to the latest master 
3fea655 rc: support init.d scripts with START=0

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2020-09-18 08:19:04 +02:00
Rafał Miłecki c57b907f86 uhttpd: update to the latest master 
47c34bd ubus: add ACL support for "subscribe" request

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
 2020-09-18 08:16:06 +02:00
Martin Schiller a594a5a330 lantiq: use uniform "u-boot-env" mtd label 
This is the most popular choice in the linux kernel tree.

Within OpenWrt, this change will establish consistency with ath79
and ramips targets.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[extend commit message, include netgear_dm200, update base-files]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
 2020-09-17 21:09:51 +02:00
David Bauer 520074e57e usbutils: update USB IDs to the latest version 
Update from 0.321 to 0.339

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-17 18:10:41 +02:00
David Bauer c2e75017a2 libjson-c: update to 0.15 
Drop patches as they've been upstreamed:
 * 001-Fix-CVE-2020-12762.patch

Refresh patches:
 * 000-libm.patch

Add patch to avoid build failure due to missing docs in tarball.

Signed-off-by: David Bauer <mail@david-bauer.net>
 2020-09-17 18:08:54 +02:00
Felix Fietkau caf727767a mac80211: do not allow bigger VHT MPDUs than the hardware supports 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2020-09-17 14:48:33 +02:00
Rui Salvaterra 419f149e48 zram-swap: default to lzo instead of lzo-rle compression 
On devices with small amounts of RAM, zram-swap fails to initialise due to the
default compression algorithm (lzo-rle). Startup example on an AirGrid M2, with
32 MiB of RAM:

root@airgrid:/etc/config# /etc/init.d/zram start
zram_start: activating '/dev/zram0' for swapping (13 MegaBytes)
zram_reset: enforcing defaults via /sys/block/zram0/reset
sh: write error: Out of memory
mkswap: image is too small
swapon: /dev/zram0: Invalid argument
root@airgrid:/etc/config#

Fix this by defaulting to traditional lzo, which works fine and is always
available.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
 2020-09-17 10:29:40 +02:00
John Crispin 0fbdb51f76 ipq40xx: add Edgecore OAP-100 support 
flashing the unit
* first update to latest edcore FW as per the PDF instructions
* boot the initramfs
  - tftpboot 0x88000000 openwrt-ipq40xx-generic-edgecore_oap100-initramfs-fit-uImage.itb; bootm
* inside the initramfs call the following commiands
  - ubiattach -p /dev/mtd0
  - ubirmvol /dev/ubi0 -n0
  - ubirmvol /dev/ubi0 -n1
  - ubirmvol /dev/ubi0 -n2
* scp the sysupgrade image to the board and call
  - sysupgrade -n openwrt-ipq40xx-generic-edgecore_oap100-squashfs-nand-sysupgrade.bin

Signed-off-by: John Crispin <john@phrozen.org>
 2020-09-17 08:43:07 +02:00
Robert Marko 4488b260a0 ipq40xx: add Edgecore ECW5211 support 
This patch adds support for the Edgecore ECW5211 indoor AP.

Specification:
- SoC: Qualcomm Atheros IPQ4018 ARMv7-A 4x Cortex A-7
- RAM: 256MB DDR3
- NOR Flash: 16MB SPI NOR
- NAND Flash: 128MB MX35LFxGE4AB SPI-NAND
- Ethernet: 2 x 1G via Q8075 PHY connected to ethernet adapter via PSGMII (802.3af POE IN on eth0)
- USB: 1 x USB 3.0 SuperSpeed
- WLAN: Built-in IPQ4018 (2x2 802.11bng, 2x2 802.11 acn)
- CC2540 BLE connected to USB 2.0 port
- Atmel AT97SC3205T I2C TPM

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2020-09-17 08:43:03 +02:00
Robert Marko 59f0a0fd83 ipq806x: add Edgecore ECW5410 support 
This patch adds support for the Edgecore ECW5410 indoor AP.

Specification:
- SoC: Qualcomm Atheros IPQ8068 ARMv7 2x Cortex A-15
- RAM: 256MB(225 usable) DDR3
- NOR Flash: 16MB SPI NOR
- NAND Flash: 128MB S34MS01G2 Parallel NAND
- Ethernet: 2 x 1G via 2x AR8033 PHY-s connected directly to GMAC2 and GMAC3 via SGMII (802.3af POE IN on eth0)
- USB: 1 x USB 3.0 SuperSpeed
- WLAN: 2x QCA9994 AC Wawe 2 (1x 2GHz bgn, 1x 5GHz acn)
- CC2540 BLE
- UART console on RJ45 next to ethernet ports exposed.
Its Cisco pin compatible, 115200 8n1 baud.

Installation instructions:
Through stock firmware or initramfs.

1.Connect to console
2. Login with root account, if password is unknown then interrupt the boot with f and reset it in failsafe.
3. Transfer factory image
4. Flash the image with ubiformat /dev/mtd1 -y -f <your factory image path>

This will replace the rootfs2 with OpenWrt, if you are currently running from rootfs2 then simply change /dev/mtd1 to /dev/mtd0

Note

Initramfs:
1.  Connect to console
2.  Transfer the image from TFTP server with tftpboot,
or by using DHCP advertised image with dhcp command.
3. bootm
4. Run ubiformat /dev/mtd1

You need to interrupt the bootloader after rebooting and run:
run altbootcmd

This will switch your active rootfs partition to one you wrote to and boot from it.

So if rootfs1 is active, then it will change it to rootfs2.

This will format the rootfs2 partition, if your active partition is 2 then simply change /dev/mtd1 with /dev/mtd0
If you dont format the partition you will be writing too, then sysupgrade will find existing UBI rootfs and kernel volumes and update those.
This will result in wrong ordering and OpenWrt will panic on boot.

5. Transfer sysupgrade image
6. Flash with sysupgrade -n.

Note that sysupgrade will write the image to rootfs partition that is not currently in use.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 2020-09-17 08:42:17 +02:00