9cf1d4e06e
ramips: scripts updates
...
In this patch:
* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
defined as usb led earlier, just in wrong place) - it should have
router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
default and the led is hidden also but if you are going to solder
the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29871
2012-01-23 10:23:32 +00:00
244c322d25
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board
...
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29617
2011-12-28 08:43:43 +00:00
f50b02b559
ramips: rt288x: change base address and window size of flash bank 0
...
SVN-Revision: 29616
2011-12-28 08:43:36 +00:00
98437278c4
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
...
SVN-Revision: 29615
2011-12-28 08:43:32 +00:00
723d8dd74f
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
...
SVN-Revision: 29612
2011-12-27 16:56:30 +00:00
7b1e525b56
ramips: initial support for Sitecom WL-351 v1 002
...
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
2011-12-23 14:27:16 +00:00
2cb946f5b4
ramips: add support for the Senao/EnGenius ESR-9753 board
...
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603
2011-12-23 14:27:10 +00:00
03bce34384
ramips: define firmware partition for Omnima MiniEMBWiFi
...
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602
2011-12-23 14:27:05 +00:00
0c38d36488
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
SVN-Revision: 29533
2011-12-14 20:51:26 +00:00
56c9b50006
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29422
2011-12-04 15:24:57 +00:00
62d18e9f9a
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
2dd79d55c7
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
ee8077f0fe
ramips: Support for NexAira BC2
...
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]
Signed-off-by: Adam Porter <porter.adam at gmail.com>
SVN-Revision: 28571
2011-10-24 21:49:36 +00:00
18452a753b
ramips: fix switch-port assignment for HW550-3G
...
WAN is on swtich port 0 for Aztech HW550-3G.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28570
2011-10-24 21:49:32 +00:00
72e117ec79
ramips: rt305x: add support for the ZyXEL NBG-419N board
...
SVN-Revision: 28078
2011-08-22 20:41:49 +00:00
4b96d3af2a
ramips: rt305x: remove unused defines from mach-nw718.c
...
SVN-Revision: 28077
2011-08-22 20:41:48 +00:00
462ca22e9c
ramips: sort Makefile entries
...
SVN-Revision: 28076
2011-08-22 20:41:47 +00:00
d50494f3bb
ramips: sort RAMIPS_MACH_* defines
...
SVN-Revision: 28075
2011-08-22 20:41:45 +00:00
f0049824b9
ramips: remove 'default [yn]' keywords from machine Kconfig entries
...
SVN-Revision: 28054
2011-08-19 15:55:12 +00:00
9085b05d9e
ramips: rt305x: support for wr512-3gn-like routers
...
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>
SVN-Revision: 28052
2011-08-19 15:55:10 +00:00
46b101ad0a
ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28051
2011-08-19 15:55:08 +00:00
35ecf12059
ramips: rt305x: make config and factory partitions read-only on the ATP-52B
...
SVN-Revision: 28002
2011-08-15 18:55:48 +00:00
169d68c98c
ramips: rt305x: add dwc_otg driver
...
Based on a patch by Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27997
2011-08-15 14:11:55 +00:00
0ca16a4600
ramips: rt305x: register the dwc_otg device on the relevant boards
...
SVN-Revision: 27996
2011-08-15 14:11:52 +00:00
addc86fdbd
ramips: rt305x: add dwc_otg platform device
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 27995
2011-08-15 14:11:51 +00:00
a3c7e71ae1
ramips: add support for Argus ATP-52B
...
[The ESW related changes has been removed - juhosg]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27991
2011-08-15 14:11:45 +00:00
1ebcf03789
ramips: allow to specify port layout for the switch of the RT305x/RT3350
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
SVN-Revision: 27990
2011-08-15 14:11:43 +00:00
ea211c4d90
ramips: rt305x: add support for the Netcore NW718 board
...
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
437e184484
ramips: rt305x: add support for the Asus RT-G32 B1 board
...
Based on a patch by: Sergiy <piratfm@gmail.com>
SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
c6db514de8
ramips: rt305x: introduce rt305x_register_spi helper
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
57122e7ccc
ramips: add SPI controller driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
3f986df05f
ramips: rt305x: add support for the DIR-600 B1,B2 boards
...
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
857c1028ac
ramips: rt305x: change machine id for DIR-300
...
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
42d3a55347
ramips: rt305x: rename LEDs on the DIR-300-B1
...
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
39689b648f
ramips: rt305x: sort Kconfig/Makefile entries
...
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
6e7b802297
ramips: merge 2.6.39 patches
...
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
3334d0604e
ramips: specify eeprom file name on RT305X
...
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
f53cc4c439
ramips: specify eeprom file name on RT288X
...
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
575a5286c8
ramips: use lowercase partiion names on the WCR150GN board
...
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
f1cf43d468
ramips: update partition map for DIR-300-B1
...
Patch by Layne Edwards from #9252 .
SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
641c87b127
ramips: consistently use 'firmware' name for sysupgrade partitions
...
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
16ad91d69f
ramips: remove unused include from the common GPIO code
...
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
affb57ee27
ramips: update HW550-3G mtd partitions
...
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
3099ffe414
ramips: set cp0_perfcount_irq for RT305X
...
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
d5a7e2f5c1
ramips: initial board support for MOFI3500-3GN
...
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This
router is basically the NA version of the HW550-3G.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26466
2011-04-04 08:43:07 +00:00
1844ea6c7b
ramips: UPF_FIXED_TYPE must be set for the serial ports
...
SVN-Revision: 26327
2011-03-27 19:20:03 +00:00
9ef4785364
ramips: define GPIO chips separately for each SoCs
...
SVN-Revision: 26326
2011-03-27 19:19:59 +00:00
37d6d88869
ramips: move GPIO definitions into a separate header file
...
SVN-Revision: 26325
2011-03-27 19:19:57 +00:00
251a367fb4
ramips: setup GPIO chip functions on the fly
...
SVN-Revision: 26324
2011-03-27 19:19:51 +00:00
b03f2dfcee
ramips: use separate register base for GPIO chips
...
SVN-Revision: 26323
2011-03-27 19:19:48 +00:00
8770359f17
ramips: fix dir-300 mtd layout
...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
SVN-Revision: 26322
2011-03-27 19:19:45 +00:00
f599459abb
ramips: enable MDIO on the HW550-3G board
...
SVN-Revision: 26321
2011-03-27 19:19:41 +00:00
d701a72760
ramips: add sysupgrade and status LED support for HW550-3G
...
This patch adds sysupgrade and status LED support for the Aztech
HW550-3G. Some LED GPIOs were changed for clarity.
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26320
2011-03-27 19:19:40 +00:00
23518bb2e4
ramips: initial board support for Aztech HW550-3G
...
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet.
Wireless appears to work fine. USB does not work yet (as with other
Ralink boards).
Signed-off-by: Layne Edwards <ledwards76@gmail.com>
SVN-Revision: 26123
2011-03-13 16:34:52 +00:00
1c92e047c8
ramips: register watchdog device on the rt288x boards
...
SVN-Revision: 25130
2011-01-26 20:48:52 +00:00
2b50cecea6
ramips: add watchdog device for RT288x
...
SVN-Revision: 25129
2011-01-26 20:48:50 +00:00
764aa3fe9c
ramips: register watchdog device on the rt305x boards
...
SVN-Revision: 25128
2011-01-26 20:48:47 +00:00
42e36cf732
ramips: add watchdog device for RT305x
...
SVN-Revision: 25127
2011-01-26 20:48:46 +00:00
f38367fcb4
ramips: implement clock API for RT288x
...
SVN-Revision: 25125
2011-01-26 20:48:39 +00:00
b0ffa70248
ramips: implement clock API for RT305X
...
SVN-Revision: 25124
2011-01-26 20:48:35 +00:00
f9e74383a9
ramips: remove extern and __init from function prototypes
...
SVN-Revision: 25123
2011-01-26 20:48:33 +00:00
f9898e30fb
ramips: handle OTG interrupt on the RT305x SoC
...
SVN-Revision: 24560
2010-12-14 08:00:25 +00:00
3b9a6adc7d
ramips: ramips_esw: convert it to be a platform driver
...
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
47dd3b9fea
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
21c8d63505
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
e5b081335e
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
462dabc7f5
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
2e45ce264d
ramips: register ethernet device on the RT-N15
...
SVN-Revision: 22213
2010-07-15 19:45:46 +00:00
c2ebadc504
ramips: add generic ethernet device for the RT288x
...
SVN-Revision: 22212
2010-07-15 19:45:43 +00:00
0d8c036e56
ramips: add mdio_cfg configuration for the ethernet driver
...
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
27375c5139
ramips: protect GPIO register access with a spinlock
...
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
971b7ff50e
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
SVN-Revision: 21643
2010-05-31 11:57:32 +00:00
c24397b385
ramips: merge slab patch
...
SVN-Revision: 21607
2010-05-28 19:45:28 +00:00
7ac21ada55
ramips: use COMMAND_LINE_SIZE directly
...
SVN-Revision: 21606
2010-05-28 19:45:24 +00:00
60cbdbb686
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
SVN-Revision: 21083
2010-04-22 09:25:37 +00:00
a423c3abee
ramips: annotate device register function prototypes with __init
...
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
a9f313edea
ramips: register wifi device for the RT2880 based boards
...
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
9f3d673dbc
ramips: add wifi device for the RT2880 as well
...
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
1c25cfcde0
ramips: register wifi device on the rt305x based boards
...
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
6f4052abe0
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20599
2010-03-30 12:04:05 +00:00
3ad14f304e
Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20596
2010-03-30 10:06:05 +00:00
72b08b729a
ramips_eth: pass sys_clk via platform_data
...
SVN-Revision: 19462
2010-01-31 17:56:30 +00:00
a4e85bbceb
ramips: register gpio buttons on the Fonera 2.0N board
...
SVN-Revision: 19413
2010-01-30 15:25:52 +00:00
8823482a02
ramips: register gpio buttons on the WHR-G300N board
...
SVN-Revision: 19412
2010-01-30 15:25:49 +00:00
35f47a3654
ramips: register gpio buttons on the V22RW-2x2 board
...
SVN-Revision: 19411
2010-01-30 15:25:47 +00:00
30a397fd5e
ramips: register gpio buttons on the DIR-300 revB board
...
SVN-Revision: 19410
2010-01-30 15:25:44 +00:00
f9b053e87f
ramips: fix wrong base addresses for the RT288x
...
SVN-Revision: 19409
2010-01-30 15:25:41 +00:00
8448caa6ad
ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
...
SVN-Revision: 19408
2010-01-30 15:25:36 +00:00
94c9590e91
ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
...
SVN-Revision: 19407
2010-01-30 15:25:33 +00:00
55185915de
ramips: cleanup WZR-AGL300NH board support file
...
SVN-Revision: 19406
2010-01-30 15:25:29 +00:00
0530dd9849
ramips: register gpio-buttons on the RT-N15 board
...
SVN-Revision: 19405
2010-01-30 15:25:25 +00:00
9327f02b7b
ramips: add common gpio-buttons device
...
SVN-Revision: 19404
2010-01-30 15:25:20 +00:00
4af1f533bb
ramips: register rtl8366s device on the RT-N15 board
...
SVN-Revision: 19403
2010-01-30 15:25:16 +00:00
e2dde81ead
ramips: sanitize return value of ramips_gpio_get
...
SVN-Revision: 19401
2010-01-30 15:25:08 +00:00
af9f40e60d
ramips: update mips multi-machine stuff
...
SVN-Revision: 19400
2010-01-30 15:25:03 +00:00
6351d88e29
add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com>
...
SVN-Revision: 19321
2010-01-24 23:31:49 +00:00
b624dec41b
ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards
...
SVN-Revision: 18229
2009-10-30 15:15:41 +00:00
bc59e3da51
ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h'
...
SVN-Revision: 18176
2009-10-26 17:17:51 +00:00
5dd653a6bd
ramips: use definitions from rt305x_regs, and nuke the duplicated ones
...
SVN-Revision: 18175
2009-10-26 17:17:48 +00:00
Gabor Juhos
Felix Fietkau
John Crispin
Jo-Philipp Wich