35463493e8
hostapd: fix a compile issue when compiling wpa_supplicant ( fixes #9837 )
...
SVN-Revision: 27830
2011-07-29 14:14:32 +00:00
a5edb705b4
ath9k: fix switching channel bandwidth from 5/10 back to 20mhz
...
SVN-Revision: 27827
2011-07-29 12:25:46 +00:00
32868c1a00
hostapd: fix wds interface address handling for multi-bssid
...
SVN-Revision: 27823
2011-07-29 09:40:24 +00:00
3712ca3f9b
hostapd: use a timeout of 1000ms instead of 100ms for the first gtk rekey eapol frame
...
SVN-Revision: 27822
2011-07-29 09:40:19 +00:00
2e339a6466
swconfig: fix backward compatibility
...
swconfig fails to load uci configuration after the generic switch
identifier changes.
root@OpenWrt:/# uci show network | grep switch
network.@switch[0]=switch
network.@switch[0].name=eth0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=eth0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0t 2 3 4 5
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device=eth0
network.@switch_vlan[1].vlan=2
network.@switch_vlan[1].ports=0t 1
root@OpenWrt:/# swconfig dev eth0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
root@OpenWrt:/# swconfig dev switch0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
SVN-Revision: 27820
2011-07-28 19:54:11 +00:00
4dd9373b3e
ppp: remove zero-length patches
...
SVN-Revision: 27819
2011-07-28 17:34:44 +00:00
4c4da37c09
ppp: version bump to 2.4.5
...
Bump to the current version of PPP.
A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed.
1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP.
Redux: re-instate the commenting out of the exponential back-off as requested by Felix.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27818
2011-07-28 16:51:12 +00:00
eaa935658b
swconfig: Add generic switch identifiers
...
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
7a206885df
firewall: prevent redundant rules if multiple ports and multiple icmp types are given in a rule block for both icmp and other protocols
...
SVN-Revision: 27792
2011-07-26 22:21:39 +00:00
d6431df9c1
ath9k: rework tx power handling - display the correct *current* tx power, and also fix tx power limits with ATH_USER_REGD set
...
SVN-Revision: 27788
2011-07-26 20:53:40 +00:00
d0cea742bb
mac80211: merge a few pending fixes for channel switch handling
...
SVN-Revision: 27783
2011-07-26 15:11:27 +00:00
20d62f8e5f
linux-atm: don't fail if an PREFIX env var is set
...
SVN-Revision: 27779
2011-07-26 10:47:59 +00:00
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
1266eb49ee
mac80211: rename a misnamed patch
...
SVN-Revision: 27769
2011-07-25 09:56:23 +00:00
b87d25ea75
mac80211: remove the ccmp rx pn workaround, it should no longer be necessary and it was reported to cause connection stability issues (see #9646 )
...
SVN-Revision: 27764
2011-07-25 06:29:00 +00:00
866a22dc67
kernel: crypto: fix spelling
...
SVN-Revision: 27757
2011-07-24 15:08:17 +00:00
00dd85d8f6
ocf-linux: version bump to 20110720
...
Fixes problem with TFM allocation in cryptosoft.c
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hauke:
* remove ubsec_ssb package and take it from ocf-linux
* use patches from ocf-linux package
* refresh all patches
* readd some build fixes for OpenWrt.
* readd CRYPTO_MANAGER dependency
SVN-Revision: 27753
2011-07-24 14:17:58 +00:00
8ecad9c51a
broadcom-wl: give the 007 patch a more meaningful name
...
SVN-Revision: 27752
2011-07-24 14:14:48 +00:00
1d7ae4aba7
broadcom-wl: make it work on the RT-N16 and other device using the BCMA bus - refresh and reorder patches - introduce a unified BCMA/SSB glue driver to accomodate for both bus types on brcm47xx - extend wlunbind init script to detach device from bcma-pci-bridge as well
...
SVN-Revision: 27751
2011-07-24 14:10:39 +00:00
0df7ae0418
mac80211: do not build bcma from compat-wireless
...
SVN-Revision: 27750
2011-07-24 12:29:27 +00:00
aa37b9656d
mac80211: fix typo and make broken options depend on BROKEN
...
SVN-Revision: 27735
2011-07-23 11:32:19 +00:00
96b6f27271
mca80211: add support for b43 on bcma bus.
...
This makes b43 work on broadcom SoCs using bcma as system bus.
SVN-Revision: 27734
2011-07-23 11:25:05 +00:00
0390780c34
kernel: add bcma package
...
SVN-Revision: 27732
2011-07-23 11:17:36 +00:00
365f76551a
base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
...
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763 .
SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
90ac92e8be
firewall: fix serious bug in state var handling ( #9746 )
...
SVN-Revision: 27711
2011-07-20 15:29:10 +00:00
49b905a2cf
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink
...
SVN-Revision: 27699
2011-07-20 08:47:19 +00:00
60d593c2d7
uci: fix one more unused-but-set issue ( #9731 )
...
SVN-Revision: 27698
2011-07-19 20:44:35 +00:00
9c606eb4c5
uhttpd: pass feature flags ( #9742 )
...
SVN-Revision: 27689
2011-07-19 06:59:47 +00:00
80ae98d604
ath9k: validate eeprom chainmask settings, some Ubiquiti devices (and maybe others) contain bogus data, which breaks wifi
...
SVN-Revision: 27688
2011-07-19 06:42:26 +00:00
6576d110d2
uhttpd: support building against openssl instead of cyassl, minor cleanups ( #7827 )
...
SVN-Revision: 27686
2011-07-18 14:18:31 +00:00
75d2ba7a5c
uci: update to fix more unused-but-set issues ( #9731 )
...
SVN-Revision: 27681
2011-07-18 10:09:53 +00:00
226ad1d259
uci: update to 2011-07-18, fixes #9731
...
SVN-Revision: 27680
2011-07-18 06:32:45 +00:00
85dcf817d8
resolveip: fix whitespace
...
SVN-Revision: 27671
2011-07-17 22:47:56 +00:00
60fe01e698
pptp: properly support symbolic VPN host names, tear down created host routes ( #4876 )
...
SVN-Revision: 27669
2011-07-17 22:42:29 +00:00
28505cad0d
add "resolveip", a small DNS lookup utility for use in scripts ( #4876 )
...
SVN-Revision: 27666
2011-07-17 22:20:48 +00:00
4da4c491a6
uboot-lantiq
...
fix arv752DPW and add arv7525PW
SVN-Revision: 27664
2011-07-17 19:27:34 +00:00
c0c7c82a2f
revert parts of r27488 to uboot-lantiq
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 27663
2011-07-17 19:27:24 +00:00
a6ceecd973
better lantiq support in madwifi
...
Allow for each lantiq target (without wifi eeprom) to define where
wireless configuration data is on flash. Patch also adds support for
sx763 lantiq target.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 27662
2011-07-17 19:27:14 +00:00
e80af9da6b
reorganize ltq-dsl-app
...
Add menu options to ltq-dsl-app.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 27661
2011-07-17 19:26:35 +00:00
0de28706ca
base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699 .
...
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
1267f048da
iptables: refresh patches
...
SVN-Revision: 27652
2011-07-17 15:53:34 +00:00
4b362b98bb
6to4: provide "adv_preferred_lifetime" and "adv_valid_lifetime" options to control the generated radvd prefix values ( #9147 )
...
SVN-Revision: 27650
2011-07-17 15:43:18 +00:00
597be91074
iptables: rewrite module help texts ( #7446 )
...
SVN-Revision: 27648
2011-07-17 15:31:30 +00:00
1ff200ead5
iptables: fix redundant binaries in iptables-utils & ip6tables-utils ( #9691 )
...
SVN-Revision: 27646
2011-07-17 15:01:07 +00:00
61aba42d5c
mountd: correctly handle poll() timeout case, solves possible 100% CPU load when idle ( #7293 )
...
SVN-Revision: 27635
2011-07-17 11:58:05 +00:00
1e34c02e3e
base-files: add -h and --help options to sysupgrade ( #9728 )
...
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
53a5beaca8
uhttpd: unblock signals in CGI childs, solves hanging ssh logout after server restart from within LuCI and similar problems
...
SVN-Revision: 27628
2011-07-17 07:18:59 +00:00
78fa88ca81
firewall: rework state variable handling, use uci_toggle_state() where applicable and properly handle duplicates in add and del state helpers ( #9152 , #9710 )
...
SVN-Revision: 27618
2011-07-15 15:03:57 +00:00
e0e6d1029e
base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars ( #9711 )
...
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
9ee12e3f62
uci: implement a uci_toogle_state() wrapper in the shell api which calls uci_revert_state() before uci_set_state()
...
SVN-Revision: 27614
2011-07-15 14:52:38 +00:00
e084d0e92a
ath9k: add some more fixes to the mic failure handling rework patch
...
SVN-Revision: 27607
2011-07-13 15:37:36 +00:00
9ef09af36d
mac80211: fix compile errors because of duplicate atomic64 implementations ( #9690 )
...
SVN-Revision: 27605
2011-07-13 15:01:18 +00:00
6493242f94
ath9k: fix mic frame handling for bigger packets
...
SVN-Revision: 27596
2011-07-12 03:24:53 +00:00
1e395abc80
fixup orion compile
...
SVN-Revision: 27591
2011-07-11 16:52:28 +00:00
1af1682eb2
wrong md5sum in ltq-ifxos
...
Signed-off-by: Luka Perkov
SVN-Revision: 27575
2011-07-10 10:40:37 +00:00
97248baa3e
mac80211: backport atomic64_t support for kernels that don't support it
...
SVN-Revision: 27572
2011-07-09 09:01:17 +00:00
7bab9b2f30
hostapd: refresh patch
...
SVN-Revision: 27571
2011-07-09 07:28:00 +00:00
8edcfc5bff
hostapd: send EAPOL frames using the same WMM queue as management frames - fixes reconnect issues under load
...
SVN-Revision: 27570
2011-07-09 07:20:19 +00:00
57d9c06f09
hostapd: only advertise a single encryption type via WPS if multiple are supported - fixes windows 7 interop issues
...
SVN-Revision: 27569
2011-07-09 07:19:55 +00:00
c1f1058a89
ath9k: merge some pending initval fixes for ar9380
...
SVN-Revision: 27566
2011-07-09 04:20:01 +00:00
8f6bd9e425
ath9k: fix sifs time for half/quarter and remove some unnecessary defines
...
SVN-Revision: 27565
2011-07-09 04:19:41 +00:00
891a96d588
ath9k: add more fixes for TKIP MIC validation
...
SVN-Revision: 27564
2011-07-09 03:33:59 +00:00
b4cef327ff
ath9k: add a temporary uci option for setting the channel bandwidth
...
SVN-Revision: 27563
2011-07-08 17:19:42 +00:00
2d0ecd63f5
ath9k: add more fixes for half/quarter rate support
...
SVN-Revision: 27562
2011-07-08 17:19:21 +00:00
c98829c864
mac80211: fix an interop issue with some broken 802.11n clients ( #9436 )
...
SVN-Revision: 27554
2011-07-08 05:49:33 +00:00
bf11563176
mac80211: add pending crypto bugfixes
...
SVN-Revision: 27552
2011-07-08 05:20:03 +00:00
f1af962560
kmod-dm9000 should build as a module
...
SVN-Revision: 27543
2011-07-07 18:21:01 +00:00
6061c471aa
fix ltq-vmmc SoC dependency
...
SVN-Revision: 27540
2011-07-07 18:20:47 +00:00
2d5d28bebf
update ltq-vmmc patches
...
SVN-Revision: 27539
2011-07-07 18:20:42 +00:00
a463daa818
replace all references to xway with danube
...
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
985d4dd88f
update ltq-tapidemo to 5.1.0.53
...
SVN-Revision: 27533
2011-07-07 18:20:11 +00:00
35309dbbc8
update ltq-ifxos to version 1.5.14
...
SVN-Revision: 27531
2011-07-07 18:20:02 +00:00
7aa12362b1
fixes ltq-vmmc for none falcon targets
...
SVN-Revision: 27530
2011-07-07 18:19:57 +00:00
d097c52ce0
pjsip-ltq-tap is for all lantiq targets
...
SVN-Revision: 27529
2011-07-07 18:19:51 +00:00
a92ed1808c
firewall: make sure that -m mac is used with --mac-source, follow up to r27508
...
SVN-Revision: 27519
2011-07-07 10:28:31 +00:00
e42f0f49e8
add perf
...
SVN-Revision: 27515
2011-07-07 09:43:04 +00:00
ca7383e701
firewall: also correct another variable missed in previous commit
...
SVN-Revision: 27508
2011-07-07 08:59:40 +00:00
c8531fca5d
firewall: fix wrong variable names for protocol command line parameter - were missed during r27500
...
SVN-Revision: 27507
2011-07-07 08:54:29 +00:00
1f69f4cf64
base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
...
SVN-Revision: 27501
2011-07-07 02:52:02 +00:00
dd4934a943
firewall: - solve scoping issues when multiple values are used, thanks Daniel Dickinson - ignore src_port/dest_port for proto icmp rules, ignore icmp_type for non-icmp rules - properly handle icmp when proto is given in numerical form (1, 58) - support negated icmp types
...
SVN-Revision: 27500
2011-07-06 22:10:46 +00:00
302347e4d4
ltq-tapi/vmmc were build on none lantiq targets due to bad builddepends of pjsip
...
SVN-Revision: 27498
2011-07-06 19:02:27 +00:00
1d43c2b5b6
ltq-tapi is not xway specific
...
SVN-Revision: 27497
2011-07-06 19:02:16 +00:00
295da57040
Lantiq TAPI driver also build for other platforms
...
thanks Matthias Buecher
SVN-Revision: 27494
2011-07-06 13:41:16 +00:00
8a5ec4142f
add support for gigaset SX76X to uboot-lantiq
...
SVN-Revision: 27488
2011-07-06 10:36:47 +00:00
b808c1bc03
fix lantiq uboot to build lzma compressed bootloaders for eval kits
...
SVN-Revision: 27487
2011-07-06 10:36:35 +00:00
3294d07ee5
ath9k: fix some more "DMA failed to stop in 10 ms" issues on AR913x ( #9654 )
...
SVN-Revision: 27482
2011-07-06 09:06:56 +00:00
3ad9a3e992
ath9k: fix reliability issues with TKIP MIC verification
...
SVN-Revision: 27481
2011-07-06 09:06:39 +00:00
e68ea8543b
ath9k: always enable fast clock for 5 ghz regardless of the eeprom setting
...
SVN-Revision: 27480
2011-07-06 09:06:21 +00:00
05c45f0f5e
firewall: fix udp rules for tcpudp proto rules using src_port and dest_port after modification by the parsing of the tcp rule
...
SVN-Revision: 27469
2011-07-06 06:26:12 +00:00
44fb344da0
e2fsprogs: Fixed filename of patch (needed .patch extension)
...
SVN-Revision: 27467
2011-07-05 23:19:29 +00:00
c291c6f6fd
e2fsprogs: Added libpthread back to blkid link, otherwise blkid fails to link)
...
SVN-Revision: 27466
2011-07-05 23:10:47 +00:00
bbece7e4e8
iptables: add iptables-mod-led ( #9400 )
...
SVN-Revision: 27460
2011-07-05 12:40:59 +00:00
42a78d909e
e2fsprogs: fix blkid dependencies ( #9377 )
...
SVN-Revision: 27459
2011-07-05 12:40:56 +00:00
adeb9ef829
add kmod-sched-netem ( #8839 )
...
SVN-Revision: 27458
2011-07-05 12:40:53 +00:00
8aba9a00dc
6in4, 6to4: prevent starting the tunnel if kmod-sit is not yet loaded ( #9643 )
...
SVN-Revision: 27449
2011-07-05 00:52:10 +00:00
3c97b838f3
kernel: use lib80211 from compat-wireless instead of the kernel
...
SVN-Revision: 27436
2011-07-04 03:16:53 +00:00
f8c6be2a58
ath9k: merge an upstream change to fix false tx hangs on ar9003
...
SVN-Revision: 27433
2011-07-04 03:03:12 +00:00
f9202745b9
ath5k: add an upstream patch to fix a memory leak
...
SVN-Revision: 27432
2011-07-04 03:02:52 +00:00
0fb39e9565
fixes dependencies of pjsip and ltq-vmmc
...
SVN-Revision: 27409
2011-07-03 17:38:52 +00:00
4dba05cc21
add falcon support to vmmc
...
SVN-Revision: 27408
2011-07-03 17:38:41 +00:00
96cc4174e3
add kmod for dm9000
...
SVN-Revision: 27402
2011-07-03 17:37:18 +00:00
bcd92ce288
add kmod definitions for at24(i2c) and at25(spi) eeproms
...
SVN-Revision: 27401
2011-07-03 17:23:36 +00:00
32731a72c2
base-files: pass conloglevel to syslogd ( #9463 , #9647 )
...
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
1c96bc9abc
max80211: rt2x00: load the eeprom data from a file on Ralink SoCs
...
SVN-Revision: 27395
2011-07-03 15:02:04 +00:00
ab90ca8945
mac80211: rename a rt2x00 related patch
...
SVN-Revision: 27394
2011-07-03 15:02:03 +00:00
3d9f6f3d35
swconfig: make reset and enable_vlan default to 1 (based on patch by Nikolay Martynov)
...
SVN-Revision: 27375
2011-07-03 04:20:18 +00:00
b017df3812
swconfig: avoid setting "NOVAL" attributes if "0" was provided as a value
...
SVN-Revision: 27374
2011-07-03 04:19:59 +00:00
2e4d84278e
package/kernel/modules: Alexandros pointed me at this patch, and I noted that not only the MFGPT module but also the new GPIO driver both rely on the mfd_core functionality to operate correctly.
...
Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27372
2011-07-03 03:14:58 +00:00
f2d749ee15
Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
...
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.
SVN-Revision: 27370
2011-07-03 03:14:51 +00:00
209a776f22
Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27369
2011-07-03 03:14:48 +00:00
0fa08e885c
ath5k: fix tx queue limit for the cabq, fixes warning described in #9465
...
SVN-Revision: 27367
2011-07-03 01:08:53 +00:00
45d4cee226
ath5k: disable the 32 khz sleep clock, atheros also does this, might improve stability
...
SVN-Revision: 27366
2011-07-03 01:08:35 +00:00
b8dcd316eb
ath5k: fix restoring the mac timing setting after a sleep clock setting change
...
SVN-Revision: 27365
2011-07-03 01:08:18 +00:00
4083940628
ath5k: delay initial periodic calibration after reset to improve stability
...
SVN-Revision: 27364
2011-07-03 01:07:59 +00:00
289e2f2169
ath9k: clean up pll code for ar9002 to fix 5/10 mhz pll settings for 5ghz
...
SVN-Revision: 27362
2011-07-02 10:48:58 +00:00
091ea63719
package/mtd: don't append jffs2 data multiple times
...
SVN-Revision: 27358
2011-07-02 08:38:00 +00:00
7845c7b512
ath5k: fix a crash when setting coverage class before the first channel change ( #9586 )
...
SVN-Revision: 27352
2011-07-02 07:48:34 +00:00
b8b060d2fe
broadcom-wl: fix memory corruption and leakage on remove (patch from #9576 by George Kashperko)
...
SVN-Revision: 27348
2011-07-02 07:01:24 +00:00
0a7a73261a
base-files: do not use the relinked libgcc, fixes c++ exception handling issues ( #9185 )
...
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
ce6b3da880
move mkelfimage from tools/ to package/ as it needs a proper i386 toolchain - make the package hidden so that it is automatically built without having to be selected
...
SVN-Revision: 27345
2011-07-02 06:49:36 +00:00
9f38d4402b
ath9k: add a small hack to make changing the channel bandwidth to 5/10 mhz available through debugfs - does not work on all chipsets and is not recommended for production use yet
...
SVN-Revision: 27340
2011-07-01 16:11:53 +00:00
aca1b30101
ath9k: merge an upstream patch that provides a minor throughput improvement on ar9003
...
SVN-Revision: 27339
2011-07-01 16:11:33 +00:00
600a8517ad
firewall: fix port range quirk in previous commit
...
SVN-Revision: 27335
2011-07-01 11:50:48 +00:00
df14a48dc9
firewall: properly handle negated ports in nat reflection
...
SVN-Revision: 27334
2011-07-01 11:48:14 +00:00
44756fe93c
ath5k: enable spur mitigation for ar2413 - should improve performance and reliability on those devices
...
SVN-Revision: 27331
2011-07-01 11:33:07 +00:00
0b250e3123
ath5k: add a missing srev checks for code that lowers the synth voltage - might fix some stability issues
...
SVN-Revision: 27325
2011-07-01 05:10:47 +00:00
5392494101
ath5k: disable tx power gain correction probing for hardware that does not need or support it
...
SVN-Revision: 27324
2011-07-01 04:04:54 +00:00
0d796ee9e3
mac80211: rename a misnamed patch
...
SVN-Revision: 27323
2011-07-01 04:04:34 +00:00
07abf4a81e
firewall: refine default ICMPv6 rules to better conform with RFC4890, do not forward link local ICMP message types, allow parameter problem
...
SVN-Revision: 27321
2011-06-30 12:22:05 +00:00
8f0fb81dfe
firewall: restore local port relocation ability from r26617
...
SVN-Revision: 27318
2011-06-30 01:36:09 +00:00
68a1c8e1e3
firewall: - allow multiple ports, protocols, macs, icmp types per rule - implement "limit" and "limit_burst" options for rules - implement "extra" option to rules and redirects for passing arbritary flags to iptables - implement negations for "src_port", "dest_port", "src_dport", "src_mac", "proto" and "icmp_type" options - allow wildcard (*) "src" and "dest" options in rules to allow specifying "any" source or destination - validate symbolic icmp-type names against the selected iptables binary - properly handle forwarded ICMPv6 traffic in the default configuration
...
SVN-Revision: 27317
2011-06-30 01:31:23 +00:00
43938e8eb9
package/rbcfg: new tool for modifying boot configuration on the RB4xx boards
...
SVN-Revision: 27315
2011-06-29 09:40:54 +00:00
4c18da3df6
brcm47xx: add initial support for devices with bcma bus.
...
Ethernet and wifi are not working and this is highly experimental.
SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
ca979845cc
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
baf6423827
mac80211: merge a pending fix for reestablishing misconfigured aggregation sessions
...
SVN-Revision: 27292
2011-06-27 09:31:09 +00:00
ce50bb1636
busybox: update to 1.18.5, patch from Peter Wagner
...
SVN-Revision: 27288
2011-06-25 22:05:14 +00:00
0243ec0da3
mac80211: force b44 and atl* to be disabled, even if they are enabled in the kernel tree
...
SVN-Revision: 27285
2011-06-25 19:31:12 +00:00
e087e678af
mac80211: configure HT IBSS through uci
...
SVN-Revision: 27279
2011-06-24 19:53:31 +00:00
9a790eb3df
iw: add support for configuring HT IBSS
...
SVN-Revision: 27278
2011-06-24 19:53:27 +00:00
87617ce258
mac80211: add the work-in-progress IBSS HT patch, with some minor fixes
...
SVN-Revision: 27277
2011-06-24 19:53:22 +00:00
f85d10e1f3
ath9k: add some more pending fixes
...
SVN-Revision: 27276
2011-06-24 19:53:18 +00:00
c7744447a5
mac80211: update to wireless-testing 2011-06-22
...
SVN-Revision: 27275
2011-06-24 19:53:13 +00:00
e2d3555a91
kernel: fix wrong line for the +@DRIVER_WEXT_SUPPORT dependency in kmod-net-zd1201
...
SVN-Revision: 27274
2011-06-24 19:53:09 +00:00
3294d04e44
mac80211: enable cfg80211 debugfs support
...
SVN-Revision: 27273
2011-06-24 19:53:05 +00:00
67fc519a3d
hotplug2: make libbsd depend on "not uclibc" for now, the conditional depdendency handling needs fixes
...
SVN-Revision: 27266
2011-06-23 18:49:24 +00:00
ddb4735871
fix conditional dependencies to libbsd
...
SVN-Revision: 27265
2011-06-23 14:38:29 +00:00
28fbd7470d
add gfortran compiler support ( #9600 , patch from Xiangfu Liu via Qi hardware)
...
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
3f0f8d9c87
fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
a9191c8b32
mac80211: use firmware from linux-firmware git
...
Use the firmware from linux-firmware git where possible.
Update some firmware files in that process and check for missing firmware files for some modules.
* update Ralink firmwares
* update ath9k_htc firmware
* add firmware for mwl8k
* add more firmware files for libertas-sd and libertas-usb
SVN-Revision: 27252
2011-06-21 20:50:10 +00:00
a3a5eb275f
mac80211: fix debugfs for ath9k_htc
...
if debugfs was enabled ath9k_htc did not load.
SVN-Revision: 27251
2011-06-21 20:44:50 +00:00
cda72f33f4
mac80211: remove rests of ar9170 driver
...
SVN-Revision: 27250
2011-06-21 20:43:50 +00:00
ca705913cc
kernel: package more NIC drivers: * SiS 190 Fast/Gigabit Ethernet support * SysKonnect Yukon support * Atheros L2 Fast Ethernet support * Atheros L1 Gigabit Ethernet support * Atheros L1C * Atheros L1E Patch by Lauri Võsandi<lauri.vosandi@gmail.com>
...
SVN-Revision: 27242
2011-06-20 09:41:03 +00:00
a434ed2fc6
block-mount: remove explicit lock waits, solves some potential race conditions
...
SVN-Revision: 27226
2011-06-19 18:15:14 +00:00
8d48672c10
link against 'libbsd' when using glibc
...
SVN-Revision: 27209
2011-06-17 22:51:20 +00:00
e40867228e
package/kernel: Fixed missing CONFIG_HID_SUPPORT required for successful kmod-bluetooth compile.
...
SVN-Revision: 27201
2011-06-17 11:21:16 +00:00
9f37422f2f
firewall: ensure that fw_get_subnet4() sets an empty value if no (valid) IPv4 addr was found
...
SVN-Revision: 27198
2011-06-16 22:18:45 +00:00
c014101d73
firewall: allow symbolic names of interfaces and aliases in masq_src and masq_dest
...
SVN-Revision: 27196
2011-06-16 21:54:59 +00:00
4b113046a4
libbsd: do not build when using uclibc
...
SVN-Revision: 27194
2011-06-16 14:34:47 +00:00
0db9c2bd7d
acx-mac80211: Compile fix for newer kernels
...
common.c is missing an include for linux/ratelimit.h.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27190
2011-06-15 21:18:21 +00:00
b213493bda
busybox: Fix insmod for linux 3.0
...
Insmod silently rejected being run on any non 2.x kernel. Make its version
check allow newer kernels (and reject 2.4- when not enabling the 2.4
feature).
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27189
2011-06-15 21:17:52 +00:00
e8974127fb
madwifi: Fix linux 3.0 detection
...
Allows madwifi to be built against linux 3.0.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27188
2011-06-15 21:17:17 +00:00
dfcd340721
package/mac80211: Add linux 3.0 compatibility
...
Add patches from Hauke adding linux 3.0 compatibility.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27187
2011-06-15 21:16:38 +00:00
cd3bd6e13e
package/kernel: Update version dependencies and kmods for linux 3.0
...
Also disable rtc-core for now since this changed to a bool, now directly
used in the kernel if enabled.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27186
2011-06-15 21:12:49 +00:00
471c8077ee
link hotplug2 against libbsd when eglibc is used
...
SVN-Revision: 27170
2011-06-13 13:16:11 +00:00
779bc30119
add library 'libbsd'
...
This library contains core functionality usually (but obviously not always)
provided by libc implementations which isneeded by OpenWrt core packages.
For instance the functions 'strlcat', 'strlcpy' are not implemented in
eglibc but needed by hotplug2 (udevtrigger)
SVN-Revision: 27169
2011-06-13 13:16:08 +00:00
1277bd7186
6to4: advertise effective tunnel mtu in RAs
...
SVN-Revision: 27163
2011-06-12 19:27:21 +00:00
d3b8685cd7
6to4: don't start if detected local IPv4 address is RFC1918, allows people to deploy firmwares with 6to4 enabled by default
...
SVN-Revision: 27160
2011-06-12 18:59:40 +00:00
01e7d775e7
ppp: remove -ffunction-sections, -fdata-sections and -Wl,--gc-sections, it can cause functions needed by plugins to disappear ( fixes #9462 )
...
SVN-Revision: 27159
2011-06-12 14:07:08 +00:00
ce4e5bd91d
kernel: revert unrelated change in previous commit
...
SVN-Revision: 27150
2011-06-09 14:36:01 +00:00
c9ad45e098
kernel: gre depends on ipv6 is Kernel is built with IPv6 support
...
SVN-Revision: 27149
2011-06-09 14:34:53 +00:00
344445715a
base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
...
SVN-Revision: 27147
2011-06-09 12:36:30 +00:00
fd8ec24187
base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
...
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
4798e27247
Revert "[package/block-mount] remove example config file"
...
This isn't needed anymore due to commit 27138
SVN-Revision: 27139
2011-06-08 20:45:19 +00:00
b179722c71
make sure that base-files is installed last, this allows per-target base-file overlays to work correctly
...
SVN-Revision: 27138
2011-06-08 19:38:25 +00:00
4cbdfb6d92
remove example config file
...
Having this file prevents the possibility of having target-specific
fstab config files (as target/linux/${target}/base-files/etc/config/fstab).
There is no need of a non-working example file on the target anyway.
SVN-Revision: 27136
2011-06-08 17:39:16 +00:00
97ee10d691
base-files: fix error reporting for unsupported protocols on virtual interfaces
...
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
9a227d88dd
base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
...
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
c807bc2432
kernel: fix description of kmod-pata-cs5535 and kmod-pata-cs5536
...
SVN-Revision: 27126
2011-06-07 15:39:12 +00:00
e353efcf6f
kernel: fix call of kmod-pata-cs5535 and kmod-pata-cs5536
...
SVN-Revision: 27125
2011-06-07 15:36:49 +00:00
254812ba0a
require mppe 128bit-encryption by default
...
SVN-Revision: 27117
2011-06-06 22:27:04 +00:00
ee877c8ba3
grub: improve package requirement error, patch by Jim Cromie <jim.cromie@gmail.com>
...
SVN-Revision: 27109
2011-06-04 14:33:35 +00:00
3715fa33fe
compcache does not build on 2.6.38+
...
SVN-Revision: 27103
2011-06-04 13:35:48 +00:00
7f773af9dd
acx-mac80211: remove patch
...
This patch is already incorporated into the original source code.
closes #9499
SVN-Revision: 27100
2011-06-04 09:33:02 +00:00
90f0d47a03
soloscli: fix new lines in soloscli
...
If the string received from the ADSL firmware is missing \n, add it in.
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
SVN-Revision: 27096
2011-06-02 14:38:01 +00:00
7d8d47d29e
acx-mac80211: add io endianness patch
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 27095
2011-06-02 14:37:56 +00:00
9769854aae
mac80211: add initial support for AR9330
...
SVN-Revision: 27084
2011-06-01 13:12:31 +00:00
41a169115b
mac80211: update to wireless-testing 2011-05-27
...
SVN-Revision: 27071
2011-05-31 23:07:29 +00:00
a456082ccd
mac80211: make ath9k available even if PCI support is disabled
...
SVN-Revision: 27046
2011-05-31 22:53:16 +00:00
68af223efe
x86: remove pata-amd driver from generic x86 images, add addition cs553x modules
...
The pata-cs5535/pata-cs5536 driver is actually fairly rare: it only gets used on embedded platforms. Therefore, we remove it from the generic x86 configuration.
Also, add definitions for other useful geode modules (high-res timers, MFGPT timers, etc).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27037
2011-05-31 16:57:01 +00:00
7f0fc7b0cf
ath9k: reduce the number of rx buffers, 512 is excessively high, 128 should work just as well, and will use a lot less memory
...
SVN-Revision: 27029
2011-05-30 13:38:54 +00:00
6608f419d1
* backport 2.6.8 patches to .39 / .32.33
...
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support
SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
c7cdee0230
ath9k: merge a few bugfixes
...
SVN-Revision: 27025
2011-05-28 16:45:17 +00:00
2dd4505c62
ath5k: disable fast channel changes, some people have reported that they introduce connection stability issues
...
SVN-Revision: 27024
2011-05-28 16:27:24 +00:00
6e9542e392
hostapd: fix a race condition related to assoc response tx status processing
...
SVN-Revision: 27022
2011-05-28 16:27:17 +00:00
1b2b3be64d
hostapd: update to 20110527, includes a client mode wpa auth fix
...
SVN-Revision: 27021
2011-05-28 16:27:12 +00:00
6769216a64
kernel: generic: Update 2.6.39 to final
...
* Add missing config symbols
* Update package/kernel for 2.6.39
CONFIG_BT_L2CAP=y and CONFIG_BT_SCO=y are set to build them into the bluetooth module.
Thank you Jonas Gorski for the patch
SVN-Revision: 27010
2011-05-25 19:51:40 +00:00
1da26a536c
libpcap: properly fix fPIC handling (reverts $(FPIC) added in r26999)
...
SVN-Revision: 27000
2011-05-24 10:42:49 +00:00
f94411e910
libpcap: add -fpic, refresh patches
...
SVN-Revision: 26999
2011-05-24 10:36:25 +00:00
fb141e452c
libpcap: remove empty patchfiles
...
SVN-Revision: 26996
2011-05-24 09:53:53 +00:00
a1713cc3cb
Update libpcap to version 1.1.1
...
Signed-off-by: Christoph König <christoph.koenig@ikt.uni-hannover.de>
SVN-Revision: 26995
2011-05-24 09:51:08 +00:00
60f66ded72
base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
...
SVN-Revision: 26990
2011-05-24 09:31:37 +00:00
9b8a5e604a
base-files: mark /etc/crontabs/ as config directory
...
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
7a5fcc5695
kernel: kmod-crypto-iv depends on kmod-crypto-manager Add a missing dependency to kmod-crypto-iv. chainiv.ko and eseqiv.ko from kmod-crypto-iv depend on crypto_blkcipher.ko from kmod-crypto-manager.
...
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26984
2011-05-24 09:14:35 +00:00
50b69073d6
dnsmasq: allow hostname assignment without static lease The attached patch for dnsmasq.init allows to assign a hostname to a particular mac-address. It's useful to override the client supplied hostname, especially if the client does not supply a hostname at all.
...
It corresponds to the following example in dnsmasq.conf.example:
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
Regards
Mathias
SVN-Revision: 26983
2011-05-24 09:12:50 +00:00
be906f6be5
package u32 match and TEE target, patches by Maxim Uvarov
...
SVN-Revision: 26977
2011-05-24 08:14:29 +00:00
a12a8271a7
ncurses: enable C++ bindings ( #9442 )
...
SVN-Revision: 26970
2011-05-22 16:53:09 +00:00
7e6b24a810
iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence
...
SVN-Revision: 26968
2011-05-22 12:02:35 +00:00
f2b7c81d46
firewall: explictely mention network in default configuration, makes it less confusing
...
SVN-Revision: 26961
2011-05-20 13:45:40 +00:00
2383a26168
broadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api
...
broadcom-wl driver bound to ssb device with ssb driver probe
have osh handle struct pdev pointer value initialized with
ssb_device pointer. Later on pdev is used with legacy pci
dma api as pci_dev thus causing oops sometimes.
The patch replaces legacy pci dma api and pass relevant
device struct pointer to avoid crashes.
Signed-off-by: George Kashperko <george@znau.edu.ua>
SVN-Revision: 26949
2011-05-19 10:08:02 +00:00
7c8564d7c5
broadcom-wl: fix uninitialized variable
...
It was causing an occasional kernel oops.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 26948
2011-05-19 10:07:57 +00:00
512be5ce46
ath9k: fix some locking issues in the tx fifo cleanup patch
...
SVN-Revision: 26947
2011-05-19 09:33:45 +00:00
9b228c181c
ath9k: clean up tx fifo handling on ar9380 based hardware
...
SVN-Revision: 26934
2011-05-18 12:03:08 +00:00
6400498b35
ath9k: fix a small race condition in the tx_last_beacon patch
...
SVN-Revision: 26933
2011-05-18 12:03:04 +00:00
ed8f726dab
ipcalc.sh CIDR notation Hi,
...
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
e35822050b
mac80211: sync the CONFIG_ATH5K_DEBUG make override with the buildflags override (thx, KanjiMonster)
...
SVN-Revision: 26927
2011-05-17 18:23:50 +00:00
888bee4ef2
ath9k: implement tx_last_beacon() to allow mac80211 to respond to probe requests in ad-hoc mode without creating too much spam
...
SVN-Revision: 26923
2011-05-17 11:14:15 +00:00
8c2de891a9
* add missing aes dependency to mv_cesa
...
Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26920
2011-05-17 10:48:37 +00:00
c6a93676de
ath9k: fix ad-hoc nexttbtt calculation, which broke beacon transmission in some instances
...
SVN-Revision: 26915
2011-05-17 08:37:38 +00:00
7b84bc2f39
ath9k: fix issues with ad-hoc beacon slot selection
...
SVN-Revision: 26913
2011-05-16 21:50:30 +00:00
c2bee5a64a
mac80211: update to 2011-05-13
...
SVN-Revision: 26912
2011-05-16 21:50:26 +00:00
ec05877491
package/kernel: crypto: Remove renamed modules hack
...
Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26903
2011-05-15 09:37:35 +00:00
49f738fa6d
package/kernel: netfilter: Remove 2.4/2.6 references
...
There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26902
2011-05-15 09:37:32 +00:00
2850136ae8
package/kernel: Remove all 2.4 definitions
...
With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26901
2011-05-15 09:37:28 +00:00
b468227827
package/kernel: Remove $(KMOD_SUFFIX) usage
...
Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26900
2011-05-15 09:37:24 +00:00
44eab3f6c1
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.
...
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26868
2011-05-09 20:28:04 +00:00
eb4109ba78
Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht
...
SVN-Revision: 26857
2011-05-08 17:03:07 +00:00
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
3b1b49a49b
base-files: fix a typo in etc/banner
...
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
f3e4c15229
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
...
SVN-Revision: 26822
2011-05-04 14:51:06 +00:00
dbea075cd4
ath9k: add noise floor calibration fix that should improve stability
...
SVN-Revision: 26819
2011-05-04 14:35:35 +00:00
9736cfef66
comgt: add tty hotplug remove handling, only iterate each tty once ( #9211 )
...
SVN-Revision: 26816
2011-05-04 08:19:07 +00:00
bba138c671
kernel: revert r26814
...
SVN-Revision: 26815
2011-05-03 21:25:36 +00:00
be2275b8e6
kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
...
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814
2011-05-03 21:22:43 +00:00
3d0ac93274
kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion.
...
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813
2011-05-03 21:21:05 +00:00
32f3c920a2
kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules.
...
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812
2011-05-03 21:19:56 +00:00
29392373f3
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
...
SVN-Revision: 26810
2011-05-03 19:45:55 +00:00
549067e2b4
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug ( #9211 )
...
SVN-Revision: 26809
2011-05-03 19:39:13 +00:00
ff4203b9bd
base-files: cleanup permissions of device files in common hotplug rules ( #9211 )
...
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
d66dc5307d
hotplug2: introduce tty subsystem events ( #9211 )
...
SVN-Revision: 26807
2011-05-03 19:35:58 +00:00
2e9e4c435f
firewall: revert accidential committed changes from r26805
...
SVN-Revision: 26806
2011-05-02 12:55:36 +00:00
ad23dd94b6
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
...
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.
(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805
2011-05-02 12:54:31 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
28fb716737
ath9k: add a new fix for signal strength / noise measurements
...
SVN-Revision: 26798
2011-05-01 18:23:12 +00:00
ebcc60cf35
mac80211: detect and drop incoming packets with invalid CCMP packet numbers to fix connection hangs on some devices
...
SVN-Revision: 26795
2011-05-01 01:45:26 +00:00
ed5e092217
exclude pktgen for uml target
...
SVN-Revision: 26781
2011-04-29 12:04:17 +00:00
cb0c1f9015
relayd: map "ipaddr" option to local ip (-L)
...
SVN-Revision: 26773
2011-04-27 19:16:35 +00:00
c2d4e98e34
madwifi: Fix compilation for 2.6.39
...
Fix compilation for 2.6.39 by replacing SPIN_LOCK_UNLOCKED with
DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26771
2011-04-26 23:05:34 +00:00
6b376db844
mac80211: backport some more compat fixes, fix compile issues on 2.6.31 and earlier
...
SVN-Revision: 26768
2011-04-26 22:23:52 +00:00
be3deb5b14
mac80211: broadcast the country IE by default if the country code is configured ( #9308 )
...
SVN-Revision: 26765
2011-04-26 19:33:27 +00:00
2b5517934d
wpa_supplicant: make sure that the common 802.11 code gets linked in ( fixes #9299 )
...
SVN-Revision: 26764
2011-04-26 19:16:25 +00:00
359e667fd5
mac80211: replace the regd revert patch with a proper fix, add some more pending patches
...
SVN-Revision: 26761
2011-04-26 01:23:23 +00:00
f2ccc3ada5
ath9k: remove the signal strength fix, it causes a lot of confusion and seems to be just as inaccurate as the original version of the code
...
SVN-Revision: 26753
2011-04-25 18:21:32 +00:00
9dbcf86d8e
cfg80211: revert upstream regdomain handling breakage
...
SVN-Revision: 26752
2011-04-25 18:21:28 +00:00
cbbe49a1d8
hostapd: fix a few compile errors and warnings
...
SVN-Revision: 26751
2011-04-24 03:34:46 +00:00
e15e8f6976
mac80211: do rate control updates when the HT configuration changes on an interface
...
SVN-Revision: 26750
2011-04-23 21:34:40 +00:00
d7bdfca6d0
hostapd: update to 2011-04-21
...
SVN-Revision: 26749
2011-04-23 21:34:35 +00:00
6986b1b7c2
mac80211: remove unneeded patch
...
This was fixed upstream
SVN-Revision: 26745
2011-04-21 09:32:49 +00:00
970252faf8
mac80211: update to wireless-testing 2011-04-19, contains several beacon related fixes for ath9k
...
SVN-Revision: 26744
2011-04-20 18:14:35 +00:00
7982978391
ppp: extend the r26742 change to ip-down too
...
SVN-Revision: 26743
2011-04-20 12:08:12 +00:00
8d47f51f7c
ppp: prevent duplicate hotplug for non uci managed ppp interfaces ( #9275 )
...
SVN-Revision: 26742
2011-04-20 12:02:04 +00:00
2a386cee99
firewall: prevent excessive uci state data aggregation ( #9152 )
...
SVN-Revision: 26740
2011-04-20 11:49:09 +00:00
04d064a590
busybox: refresh patches
...
SVN-Revision: 26738
2011-04-20 02:56:23 +00:00
c4dbe835b4
busybox: fix issues with static routes and 6rd option parsing (thx, Florian Fuessl)
...
SVN-Revision: 26737
2011-04-20 02:56:17 +00:00
75a63f1981
mac80211: b43: Expose N-PHY support
...
Allow enabling of N-PHY support for BCM4321 and BCM4322.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26736
2011-04-19 21:44:29 +00:00
becddc9ec7
mac80211: b43: Expose PIO mode fallback
...
Allow reenabling the PIO mode fallback for b43.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26735
2011-04-19 21:43:19 +00:00
0429ec0c11
mac80211: b43: Expose debug option
...
Allow enabling debug output and debugfs for B43.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26734
2011-04-19 21:40:29 +00:00
cda9981625
mac80211: b43: Add Firmware 5.10.56.27
...
Add the 5.10.56.27 firmware option. This includes updating b43-fwcutter to
its newest release 14 and updating the b43-fwsquash.py to recognise rev 16
n phy files.
Also rename the current options from STABLE/EXPERIMENTAL to their version
numbers.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26733
2011-04-19 21:40:08 +00:00
ea07da5fe5
hostapd: fix bridge handling for wds stations ( #9257 )
...
SVN-Revision: 26724
2011-04-19 15:41:49 +00:00
9d0882b720
mac80211: re-enable beacon channel hints
...
SVN-Revision: 26723
2011-04-19 15:41:45 +00:00
144bee2090
base-files: fix stale space in eglibc library install section ( #9270 )
...
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
f22d06ad7a
librpc: update to a newer version to fix issues with __set_errno
...
SVN-Revision: 26716
2011-04-18 09:42:46 +00:00
032a3504ee
ath9k: assign a keycache slot per station for unencrypted links to fix powersave frame filtering
...
SVN-Revision: 26712
2011-04-17 20:56:14 +00:00
cbc16e179e
ath9k: add a patch to show excessive retry counts for single MPDUs
...
SVN-Revision: 26711
2011-04-17 20:56:10 +00:00
8f5a84a690
mac80211: fix the config define for iwl3945
...
SVN-Revision: 26697
2011-04-16 19:52:39 +00:00
8cf42db0ca
mac80211: make intel wireless drivers depend on pci support
...
SVN-Revision: 26696
2011-04-16 19:52:35 +00:00
e00eaf1545
mac80211: add intel drivers to PKG_CONFIG_DEPENDS
...
SVN-Revision: 26695
2011-04-16 19:52:31 +00:00
69f8f5ebfd
ath5k: allow simultaneous ad-hoc+ap operation
...
SVN-Revision: 26685
2011-04-15 16:54:52 +00:00
19e4c371c5
opkg: avoid using getline() to fix a compile issue on darwin (patch by Javier Palacios, #9223 )
...
SVN-Revision: 26684
2011-04-15 16:18:11 +00:00
4ca0906341
uboot-ar71xx: add a dependency on the ar71xx target
...
SVN-Revision: 26683
2011-04-15 15:41:49 +00:00
1b18a439e6
uboot-ar71xx: remove a bogus dependency
...
SVN-Revision: 26677
2011-04-15 00:54:14 +00:00
6397aeb8b1
uboot-ar71xx: fix compile on mac os x (patch from #9124 )
...
SVN-Revision: 26676
2011-04-15 00:54:08 +00:00
39fc0fc2f7
ath9k: due to popular request, allow ad-hoc+ap again, now that the beacon code can handle it
...
SVN-Revision: 26668
2011-04-14 23:22:21 +00:00
e0aa62e3c2
ath9k: fix resetting the hw during channel change when the MAC fails to go idle
...
SVN-Revision: 26665
2011-04-14 22:46:12 +00:00
79ecac89e6
cfg80211: disable processing of 802.11d regulatory hints - it causes invalid regulatory settings on reconnect ( fixes #9207 )
...
SVN-Revision: 26662
2011-04-14 16:52:09 +00:00
8ba2d8098a
kernel: revert r24160 (remove the bogus ext2/ext3 dependency on linux 2.6.30/31)
...
For kernel versions newer then 2.6.31 the ext4 module can be used to mount
ext2/3 filesystems.
Building ext2/3 as modules on the other hand breaks using ext4 for mounting ext2
or ext3, which breaks booting from ext2/3 on machines where the ext4 module is
built into the kernel.
SVN-Revision: 26645
2011-04-13 13:37:40 +00:00
9ec445154e
package/hostapd: cosmetic fix
...
SVN-Revision: 26644
2011-04-13 13:36:48 +00:00
372cefb114
kernel/modules: Move zlib_deflate module to higher autoloading priority
...
SVN-Revision: 26639
2011-04-12 23:48:28 +00:00
41cc2d3a52
kernel/modules: Fix r26637
...
SVN-Revision: 26638
2011-04-12 23:42:01 +00:00
d7197ec50b
kernel/modules: Add kmod-zlib dependency to kmod-crypto-deflate
...
SVN-Revision: 26637
2011-04-12 23:34:28 +00:00
4f6f0cbe38
kernel/modules: Add zlib package
...
SVN-Revision: 26636
2011-04-12 23:18:53 +00:00
0a0b8c621c
kernel/modules: Add "Libraries" submenu and move library packages there
...
SVN-Revision: 26635
2011-04-12 23:18:48 +00:00
627438d0ff
kernel/modules: fix kmod-fs-btrfs deps / zlib_deflate / makefile
...
btrfs needs zlib_deflate, which was built but not included
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 26632
2011-04-12 23:18:30 +00:00
2f6361832e
base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
...
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
9646ca6c6e
This patch updates qos-scripts to support fair traffic sharing using the SFQ with external classifiers method. It also corrects a bug in the unsupported ESFQ method already used by qos-scripts. (ESFQ: http://fatooh.org/esfq-2.6/ only updated to 2.6.24, it was switched to an SFQ patch after that and not updated since 2008)
...
A class can be forced to use SFQ, and an external classifier added like
this:
config class "Normal"
option avgrate 10
option priority 30
option packetdelay 100
option limitrate 94
# option qdisc "sfq perturb 2"
config class "Normal_up"
# option filter "protocol all flow hash keys src divisor 1024"
config class "Normal_down"
# option filter "protocol all flow hash keys dst divisor 1024"
Using these options, the user needs to load cls_flow before qos-scripts
starts.
I've got more information here:
http://oneitguy.com/blogs/netprince/fair-traffic-sharing-esfq-broken-switching-sfqexternal-classifiers
This has been tested on r23914.
Signed-off-by: Ben Pfountz <netprince<>vt_edu>
SVN-Revision: 26622
2011-04-12 20:33:11 +00:00
a9977eca91
firewall: allow local redirection of ports
...
Allow a redirect like:
config redirect
option src 'wan'
option dest 'lan'
option src_dport '22001'
option dest_port '22'
option proto 'tcp'
note the absence of the "dest_ip" field, meaning to terminate the connection on the firewall itself.
This patch makes three changes:
(1) moves the conntrack module into the conntrack package (but not any of the conntrack_* helpers).
(2) fixes a bug where the wrong table is used when the "dest_ip" field is absent.
(3) accepts incoming connections on the destination port on the input_ZONE table, but only for DNATted
connections.
In the above example,
ssh -p 22 root@myrouter
would fail from the outside, but:
ssh -p 22001 root@myrouter
would succeed. This is handy if:
(1) you want to avoid ssh probes on your router, or
(2) you want to redirect incoming connections on port 22 to some machine inside your firewall, but
still want to allow firewall access from outside.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26617
2011-04-12 20:03:59 +00:00
512bb389ee
pppd: support the nomp option if multilink support is disabled
...
SVN-Revision: 26614
2011-04-12 18:29:28 +00:00
768877966d
hostapd: properly mark random data as ready if initialization succeeds without reassociation ( #9222 )
...
SVN-Revision: 26611
2011-04-12 17:30:16 +00:00
966dee23c3
mac80211: fix WPA auth on WDS station interfaces ( #9227 )
...
SVN-Revision: 26609
2011-04-12 17:17:56 +00:00
6f497711cf
Modify environment variables for altered filesystem layout
...
SVN-Revision: 26608
2011-04-12 14:24:20 +00:00
Felix Fietkau
Gabor Juhos
Jonas Gorski
Jo-Philipp Wich
Hauke Mehrtens
John Crispin
Imre Kaloz
Florian Fainelli
Daniel Dickinson
Mirko Vogt
Rod Whitby
Vasilis Tsiligiannis
Travis Kemen
Lars-Peter Clausen
Alexandros C. Couloumbis
Hamish Guthrie