Jonas Gorski
f973580488
brcm63xx: move V2110 to DT
...
Also readd image generation which was accidentally dropped in r43364.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45165
2015-03-30 20:20:49 +00:00
Jonas Gorski
d8ba40cfcd
brcm63xx: use relocate to move the kernel back to start of ram
...
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327 ).
Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45164
2015-03-30 20:20:15 +00:00
Jonas Gorski
8353a3bd45
generic: relocate: make the cacheline size configurable
...
Different targets have different cache line sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45163
2015-03-30 20:20:10 +00:00
Jonas Gorski
703c41cf01
ramips: move relocating loader to common location
...
Allow other targets to use it, too.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45162
2015-03-30 20:20:08 +00:00
Gabor Juhos
3129f0c6f2
ar71xx/mikrotik: re-enable 4KiB flash sector erase
...
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45161
2015-03-30 19:57:52 +00:00
Gabor Juhos
62a8665fea
ar71xx: re-enable AR8216_PHY_LEDS
...
The setting has been lost during the transition to 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45160
2015-03-30 18:12:54 +00:00
Gabor Juhos
18f6a34113
ar71xx: sync kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45159
2015-03-30 18:12:50 +00:00
John Crispin
2b925161d8
xburst: add missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45155
2015-03-30 12:47:51 +00:00
Steven Barth
7e7f329ccf
kernel/generic: (try) fixing MAP-E patch broken in 4.0
...
Now it at least compiles, otherwise untested.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45145
2015-03-30 08:48:51 +00:00
Rafał Miłecki
1751676c8b
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45144
2015-03-29 19:53:11 +00:00
Rafał Miłecki
8e4b74b9fe
brcm47xx: convert Linksys E1200 V2 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45143
2015-03-29 18:15:38 +00:00
John Crispin
23d37c1208
ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC
...
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
after the zero (which wasn't always visible using busybox tools, but could
confuse other scripts)
Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.
The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.
The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.
Fixes #18992 .
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45140
2015-03-29 12:58:01 +00:00
Imre Kaloz
ebf1e2461a
x86_64: add description, maintainership
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45138
2015-03-29 12:17:39 +00:00
Felix Fietkau
661f05262b
arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45132
2015-03-29 07:36:17 +00:00
Luka Perkov
1e2f88b17b
imx: add initial version of 3.18 support
...
This is build tested only.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45125
2015-03-29 05:48:56 +00:00
Luka Perkov
375337266d
kernel: add few missing symbols
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45118
2015-03-29 04:50:16 +00:00
Luka Perkov
d949d88ef6
kernel: add symbol
...
Several targets are not using EMAC_ROCKCHIP so define it in generic config.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45117
2015-03-29 04:43:59 +00:00
Felix Fietkau
e731ea23a8
x86: add myself as maintainer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45116
2015-03-29 04:32:15 +00:00
Felix Fietkau
196fb76a4c
x86: make x86_64 a subtarget instead of a standalone target
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45115
2015-03-29 04:32:01 +00:00
Felix Fietkau
09aad60610
x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45114
2015-03-29 04:31:35 +00:00
Felix Fietkau
795e7cf60d
kernel: fix linux/spi/spidev.h portability issues with musl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45105
2015-03-29 04:28:24 +00:00
Felix Fietkau
9444bc1ee2
kernel: clean up fq_codel default patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45104
2015-03-29 04:28:02 +00:00
Florian Fainelli
85b0d25861
adm8668: switch to 3.18
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45095
2015-03-28 18:18:50 +00:00
Florian Fainelli
f51f3ee9bc
adm8668: add 3.18 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45094
2015-03-28 18:18:38 +00:00
Florian Fainelli
26cf81b94b
kernel: refresh 3.18 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45093
2015-03-28 18:17:46 +00:00
Felix Fietkau
0b13d69bba
arm64: update to linux 3.18
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45092
2015-03-28 13:38:52 +00:00
Felix Fietkau
693e5aae41
brcm63xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45089
2015-03-28 13:21:09 +00:00
Felix Fietkau
130acd0f4c
mxs: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45088
2015-03-28 13:21:04 +00:00
Felix Fietkau
b63aa281ee
rb532: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45087
2015-03-28 13:20:58 +00:00
Felix Fietkau
56c580f5f4
uml: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45086
2015-03-28 13:20:52 +00:00
Felix Fietkau
7427007193
x86: remove the olpc subtarget, it has been unmaintained for a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45083
2015-03-28 11:37:08 +00:00
Felix Fietkau
518d2b90e6
iop32x: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45082
2015-03-28 10:44:55 +00:00
Felix Fietkau
22b38f145d
cobalt: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45081
2015-03-28 10:44:49 +00:00
Felix Fietkau
04182658ef
sibyte: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45080
2015-03-28 10:44:44 +00:00
Felix Fietkau
e38b78926a
sparc: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45079
2015-03-28 10:44:37 +00:00
Felix Fietkau
40c5bee0cd
cns21xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45078
2015-03-28 10:44:31 +00:00
Felix Fietkau
65c567da13
rb532: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45073
2015-03-27 21:22:22 +00:00
Felix Fietkau
2daa34da02
rb532: align partitions to 128KB
...
because block2mtd wants "erasesize must be a divisor of device size" since 3.15
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45072
2015-03-27 21:22:17 +00:00
Felix Fietkau
c2d1ad30e8
rb532: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45071
2015-03-27 21:22:10 +00:00
John Crispin
85bf288428
lantiq: remove arphaned folder
...
the new buildbot was picking this up as a valid target.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45068
2015-03-27 19:47:22 +00:00
John Crispin
ddb5ab2acf
ralink: mt7621 add ECHI OCHI XCHI support
...
Lets hope that this time it won't break the other ralink targets.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 45067
2015-03-27 19:07:29 +00:00
Felix Fietkau
c6a29d2528
gemini: fix usb driver compilation on 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45065
2015-03-27 16:03:16 +00:00
Zoltan Herpai
19db04e699
mxs: update dtb path in image Makefile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45056
2015-03-27 02:35:11 +00:00
Felix Fietkau
f76a85515a
ar71xx: add missing id for WNR2000v3 image ( fixes #18959 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45054
2015-03-27 00:35:34 +00:00
Zoltan Herpai
a077e4af96
mxs: bump to 3.18
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45053
2015-03-26 23:35:50 +00:00
Zoltan Herpai
01748fbce2
mxs: add sdcard image builder
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45052
2015-03-26 23:34:43 +00:00
Zoltan Herpai
39370cbe25
mxs: enable uboot-mxs-duckbill build for duckbill profile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45044
2015-03-26 23:04:27 +00:00
Luka Perkov
3012319505
generic: drop old kirkwood mach types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45043
2015-03-26 22:48:31 +00:00
Zoltan Herpai
1f26498751
mxs: add 3.18 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45041
2015-03-26 22:18:47 +00:00
Felix Fietkau
65708f749a
gemini: make dd commands more portable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45039
2015-03-26 20:37:19 +00:00
Felix Fietkau
6cda886f60
gemini: switch mantainer to myself
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45038
2015-03-26 20:37:09 +00:00
Felix Fietkau
17532417c7
gemini: nuke 3.10 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45037
2015-03-26 20:36:59 +00:00
Felix Fietkau
b953a14036
gemini: remove broken flag
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45036
2015-03-26 20:36:49 +00:00
Felix Fietkau
dc622768a7
gemini: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45035
2015-03-26 20:36:40 +00:00
Felix Fietkau
44b3e3af17
gemini: don't build jffs2 image for Raidsonic board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45034
2015-03-26 20:36:35 +00:00
Felix Fietkau
a304f3d2b6
gemini: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45033
2015-03-26 20:36:30 +00:00
Lars-Peter Clausen
b18f5eb44a
xburst: Update to 3.18
...
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
SVN-Revision: 45031
2015-03-26 19:46:01 +00:00
Felix Fietkau
c25bf32f8d
ar71xx: fix image size checks for WNDR3700
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45030
2015-03-26 18:50:44 +00:00
John Crispin
40d25d3eb5
ralink: drop xhci patch, it break !mt7621 builds
...
will re-add it tomorrow after fixing it
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45028
2015-03-26 16:24:19 +00:00
John Crispin
2cedb63d84
ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org>
...
SVN-Revision: 45027
2015-03-26 14:49:26 +00:00
Imre Kaloz
f6eff33b8d
mvebu: fixup usb3 support on the a38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45026
2015-03-26 14:32:45 +00:00
Imre Kaloz
4bac1253c1
generic/4.0: upgrade to 4.0-rc5
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45025
2015-03-26 14:06:42 +00:00
Imre Kaloz
23b880b373
mvebu: add a coherency fix which didn't make it to -stable, yet
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45024
2015-03-26 13:52:21 +00:00
John Crispin
21e0f98903
ralink: add default pinctrl node for mt7621 eval kit
...
fixes #19213
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45022
2015-03-26 12:23:02 +00:00
John Crispin
0a9e38bb21
ralink: mt7621 add ECHI OCHI XCHI support
...
The usb stroage not working since updated 3.18. Porting from MTK's source code.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 45021
2015-03-26 10:59:51 +00:00
John Crispin
024e0c1835
ralink: add FireWRT power button
...
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
SVN-Revision: 45019
2015-03-26 10:59:36 +00:00
John Crispin
10aa09b731
ralink: MT7621 add i2c controller driver
...
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
SVN-Revision: 45018
2015-03-26 10:59:31 +00:00
John Crispin
ad91262a94
kernel: add missing symbol
...
Signed-off-by: John Szakmeister <john@szakmeister.net>
SVN-Revision: 45017
2015-03-26 10:59:24 +00:00
John Crispin
67c83a6595
x86: add missing symbol to xen_domu
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45016
2015-03-26 10:59:10 +00:00
John Crispin
2d994f2fdc
cobalt: enable bridge
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45014
2015-03-26 10:58:59 +00:00
John Crispin
c67144cc05
kernel: extend seccomp with a LOG action
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45007
2015-03-26 10:58:03 +00:00
Felix Fietkau
414e8ba634
bcm53xx: use the correct kernel image
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45003
2015-03-26 10:42:36 +00:00
Imre Kaloz
af69bf56b6
drop 3.19 support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45002
2015-03-26 09:42:59 +00:00
Felix Fietkau
34b51b6f6f
ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45000
2015-03-25 17:58:14 +00:00
Felix Fietkau
8d2d62ca95
ar71xx/image: add tplink device template for new building code
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44999
2015-03-25 17:58:10 +00:00
Felix Fietkau
41785176ec
ar71xx/image: add Build/mktplinkfw as buildstep for new build code
...
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44998
2015-03-25 17:58:05 +00:00
Felix Fietkau
48c69e3022
bcm53xx: convert to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44996
2015-03-25 17:57:44 +00:00
Jonas Gorski
8ffc831bef
brcm63xx: use a lookup for bcmcia's ready gpio
...
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44995
2015-03-25 15:37:38 +00:00
Jonas Gorski
1e07f8c7ff
brcm63xx: fix bcm96328avng board name
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44994
2015-03-25 15:36:26 +00:00
Jonas Gorski
4dc169f9a2
brcm63xx: fix bt v2500v dts based detection
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44993
2015-03-25 15:36:15 +00:00
Jonas Gorski
10cdfd04e6
brcm63xx: move RTA770(B)W to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44992
2015-03-25 15:36:12 +00:00
Jonas Gorski
0e4c1ba284
brcm63xx: move MAGIC to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44991
2015-03-25 15:36:05 +00:00
Jonas Gorski
582dfc52f5
brcm63xx: move CPVA502+ to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44990
2015-03-25 15:35:57 +00:00
Jonas Gorski
46b4d4d1d5
brcm63xx: move dg834g v4 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44989
2015-03-25 15:35:43 +00:00
Jonas Gorski
30a579c674
brcm63xx: move dsl-2640u to dts
...
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44988
2015-03-25 15:35:37 +00:00
Jonas Gorski
16ea19053a
brcm63xx: move bcm963268bu_p300 to dts
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44987
2015-03-25 15:35:24 +00:00
Jonas Gorski
ad218d3033
brcm63xx: fix compilation on 3.14
...
Fixes the following issue:
drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44986
2015-03-25 15:35:15 +00:00
Jonas Gorski
2d3371cd0f
brcm63xx: Add BT Home Hub 2A support.
...
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 44985
2015-03-25 15:35:12 +00:00
Jonas Gorski
065d6e9047
brcm63xx: move kernel load address to 8MiB
...
Fixes boot when uncompressed kernel is > 4 MiB (#19251 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44984
2015-03-25 15:34:59 +00:00
Jonas Gorski
ee0140a678
brcm63xx: hcsimage: respect load address
...
Respect the vmlinux load address when generating images.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44983
2015-03-25 15:34:45 +00:00
Jonas Gorski
d84fafb9f3
brcm63xx: add Livebox 1 firmware image generation
...
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the bcm63xx images
builder makefile to generate the livebox 1 firmware.
I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.
Regards
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44982
2015-03-25 15:34:40 +00:00
Jonas Gorski
77e3d442b0
brcm63xx: add a dummy image recipe for boards missing proper images
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44981
2015-03-25 15:34:26 +00:00
Jonas Gorski
02d68c2b57
brcm63xx: drop non-dtb image recipe
...
All images generated contain dtbs, so it is now unused.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44980
2015-03-25 15:34:23 +00:00
Felix Fietkau
fafa3f57e3
kernel: merge upstream bgmac driver improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44978
2015-03-25 14:30:46 +00:00
Felix Fietkau
68ca1f285c
bcm53xx: enable the full-line-of-zero optimization in the cache controller
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44977
2015-03-25 14:30:40 +00:00
Gabor Juhos
621979b49f
kernel: yaffs: use new_sync_{read,write} for 3.18+
...
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:
root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
[ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
[ 2884.120000] yaffs: passed flags ""
root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
[ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
address 00000000, epc == 00000000, ra == 80129414
[ 2902.710000] Oops[#1 ]:
[ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
[ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
[ 2902.710000] $ 0 : 00000000 fffffff8 00000000 00000000
[ 2902.710000] $ 4 : 868c7e70 868c7ea8 00000001 868c7f08
[ 2902.710000] $ 8 : 00000038 80064f18 80072280 00000000
[ 2902.710000] $12 : 7fa152b8 7709e3a0 00c42008 7709e3a0
[ 2902.710000] $16 : 868c7f08 86a46000 00000010 878e7a20
[ 2902.710000] $20 : 7705c4b0 00000010 00000000 00000000
[ 2902.710000] $24 : 770960bc 7707dd78
[ 2902.710000] $28 : 868c6000 868c7e58 7f8e7030 80129414
[ 2902.710000] Hi : 00000000
[ 2902.710000] Lo : ffffffff
[ 2902.710000] epc : 00000000 (null)
[ 2902.710000] Not tainted
[ 2902.710000] ra : 80129414 do_sync_read+0x7c/0xb4
[ 2902.710000] Status: 1900dc03 KERNEL EXL IE
[ 2902.710000] Cause : 00800008
[ 2902.710000] BadVA : 00000000
[ 2902.710000] PrId : 00019750 (MIPS 74Kc)
Change the yaffs code to use the new_sync_{read,write} functions
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 44974
2015-03-25 08:59:12 +00:00
Rafał Miłecki
8fdd0fb07c
kernel: backport rest of bcma patches
...
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44970
2015-03-24 10:39:10 +00:00
Rafał Miłecki
a7724918c9
kernel: mac80211: backport bcma patch renaming IRQ control function
...
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44969
2015-03-24 10:38:59 +00:00
Rafał Miłecki
a4d7571367
mark 3.10 targets as broken
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44968
2015-03-24 10:38:50 +00:00
Jo-Philipp Wich
02e2548b84
x86: use PARTUUID instead explicitly specifying the device by default
...
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.
It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.
Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44966
2015-03-24 10:08:12 +00:00