mirror of https://github.com/hak5/openwrt.git
kernel: mac80211: backport bcma patch renaming IRQ control function
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157 bcma: move PCI IRQ control function to host specific code Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 44969lede-17.01
Rafał Miłecki
parent
a4d7571367
commit
a7724918c9
|
|
@ -0,0 +1,104 @@
|
|||
--- a/drivers/bcma/driver_pci.c
|
||||
+++ b/drivers/bcma/driver_pci.c
|
||||
@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
|
||||
|
||||
-int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
|
||||
- bool enable)
|
||||
-{
|
||||
- struct pci_dev *pdev;
|
||||
- u32 coremask, tmp;
|
||||
- int err = 0;
|
||||
-
|
||||
- if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
- /* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
- * not routed through the PCI core.
|
||||
- * So we must not enable routing through the PCI core. */
|
||||
- goto out;
|
||||
- }
|
||||
-
|
||||
- pdev = bus->host_pci;
|
||||
-
|
||||
- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
- if (err)
|
||||
- goto out;
|
||||
-
|
||||
- coremask = BIT(core->core_index) << 8;
|
||||
- if (enable)
|
||||
- tmp |= coremask;
|
||||
- else
|
||||
- tmp &= ~coremask;
|
||||
-
|
||||
- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
|
||||
-
|
||||
-out:
|
||||
- return err;
|
||||
-}
|
||||
-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
|
||||
-
|
||||
static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
|
||||
{
|
||||
u32 w;
|
||||
--- a/drivers/bcma/host_pci.c
|
||||
+++ b/drivers/bcma/host_pci.c
|
||||
@@ -351,3 +351,37 @@ void bcma_host_pci_down(struct bcma_bus
|
||||
bcma_core_pci_down(&bus->drv_pci[0]);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(bcma_host_pci_down);
|
||||
+
|
||||
+/* See also si_pci_setup */
|
||||
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
|
||||
+ bool enable)
|
||||
+{
|
||||
+ struct pci_dev *pdev;
|
||||
+ u32 coremask, tmp;
|
||||
+ int err = 0;
|
||||
+
|
||||
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
+ * not routed through the PCI core.
|
||||
+ * So we must not enable routing through the PCI core. */
|
||||
+ goto out;
|
||||
+ }
|
||||
+
|
||||
+ pdev = bus->host_pci;
|
||||
+
|
||||
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
+ if (err)
|
||||
+ goto out;
|
||||
+
|
||||
+ coremask = BIT(core->core_index) << 8;
|
||||
+ if (enable)
|
||||
+ tmp |= coremask;
|
||||
+ else
|
||||
+ tmp &= ~coremask;
|
||||
+
|
||||
+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
|
||||
+
|
||||
+out:
|
||||
+ return err;
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
|
||||
--- a/drivers/net/wireless/b43/main.c
|
||||
+++ b/drivers/net/wireless/b43/main.c
|
||||
@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct
|
||||
switch (dev->dev->bus_type) {
|
||||
#ifdef CPTCFG_B43_BCMA
|
||||
case B43_BUS_BCMA:
|
||||
- bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
|
||||
+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
|
||||
dev->dev->bdev, true);
|
||||
bcma_host_pci_up(dev->dev->bdev->bus);
|
||||
break;
|
||||
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
|
||||
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
|
||||
@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_
|
||||
* Configure pci/pcmcia here instead of in brcms_c_attach()
|
||||
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
|
||||
*/
|
||||
- bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
|
||||
+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
|
||||
true);
|
||||
|
||||
/*
|
||||
|
|
@ -154,32 +154,47 @@
|
|||
if (err)
|
||||
--- a/drivers/bcma/driver_pci.c
|
||||
+++ b/drivers/bcma/driver_pci.c
|
||||
@@ -282,21 +282,21 @@ void bcma_core_pci_power_save(struct bcm
|
||||
@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
|
||||
|
||||
-int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
|
||||
+int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
|
||||
bool enable)
|
||||
{
|
||||
struct pci_dev *pdev;
|
||||
u32 coremask, tmp;
|
||||
int err = 0;
|
||||
|
||||
- bool enable)
|
||||
-{
|
||||
- struct pci_dev *pdev;
|
||||
- u32 coremask, tmp;
|
||||
- int err = 0;
|
||||
-
|
||||
- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
/* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
* not routed through the PCI core.
|
||||
* So we must not enable routing through the PCI core. */
|
||||
goto out;
|
||||
}
|
||||
|
||||
- /* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
- * not routed through the PCI core.
|
||||
- * So we must not enable routing through the PCI core. */
|
||||
- goto out;
|
||||
- }
|
||||
-
|
||||
- pdev = pc->core->bus->host_pci;
|
||||
+ pdev = bus->host_pci;
|
||||
|
||||
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
if (err)
|
||||
@@ -328,28 +328,12 @@ static void bcma_core_pci_extend_L1timer
|
||||
-
|
||||
- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
- if (err)
|
||||
- goto out;
|
||||
-
|
||||
- coremask = BIT(core->core_index) << 8;
|
||||
- if (enable)
|
||||
- tmp |= coremask;
|
||||
- else
|
||||
- tmp &= ~coremask;
|
||||
-
|
||||
- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
|
||||
-
|
||||
-out:
|
||||
- return err;
|
||||
-}
|
||||
-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
|
||||
-
|
||||
static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
|
||||
{
|
||||
u32 w;
|
||||
@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer
|
||||
bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
|
||||
}
|
||||
|
||||
|
|
@ -318,7 +333,7 @@
|
|||
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
|
||||
@@ -310,3 +323,31 @@ void __exit bcma_host_pci_exit(void)
|
||||
@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void)
|
||||
{
|
||||
pci_unregister_driver(&bcma_pci_bridge_driver);
|
||||
}
|
||||
|
|
@ -350,6 +365,40 @@
|
|||
+ bcma_core_pci_down(&bus->drv_pci[0]);
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(bcma_host_pci_down);
|
||||
+
|
||||
+/* See also si_pci_setup */
|
||||
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
|
||||
+ bool enable)
|
||||
+{
|
||||
+ struct pci_dev *pdev;
|
||||
+ u32 coremask, tmp;
|
||||
+ int err = 0;
|
||||
+
|
||||
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
+ * not routed through the PCI core.
|
||||
+ * So we must not enable routing through the PCI core. */
|
||||
+ goto out;
|
||||
+ }
|
||||
+
|
||||
+ pdev = bus->host_pci;
|
||||
+
|
||||
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
+ if (err)
|
||||
+ goto out;
|
||||
+
|
||||
+ coremask = BIT(core->core_index) << 8;
|
||||
+ if (enable)
|
||||
+ tmp |= coremask;
|
||||
+ else
|
||||
+ tmp &= ~coremask;
|
||||
+
|
||||
+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
|
||||
+
|
||||
+out:
|
||||
+ return err;
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
|
||||
--- a/drivers/bcma/main.c
|
||||
+++ b/drivers/bcma/main.c
|
||||
@@ -363,7 +363,7 @@ static int bcma_register_devices(struct
|
||||
|
|
@ -377,7 +426,7 @@
|
|||
#ifdef CONFIG_B43_BCMA
|
||||
case B43_BUS_BCMA:
|
||||
- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
|
||||
+ bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
|
||||
+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
|
||||
dev->dev->bdev, true);
|
||||
- bcma_core_pci_up(dev->dev->bdev->bus);
|
||||
+ bcma_host_pci_up(dev->dev->bdev->bus);
|
||||
|
|
@ -400,7 +449,7 @@
|
|||
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
|
||||
*/
|
||||
- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
|
||||
+ bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
|
||||
+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
|
||||
true);
|
||||
|
||||
/*
|
||||
|
|
@ -430,13 +479,15 @@
|
|||
}
|
||||
--- a/include/linux/bcma/bcma.h
|
||||
+++ b/include/linux/bcma/bcma.h
|
||||
@@ -434,6 +434,18 @@ static inline struct bcma_device *bcma_f
|
||||
@@ -434,6 +434,27 @@ static inline struct bcma_device *bcma_f
|
||||
return bcma_find_core_unit(bus, coreid, 0);
|
||||
}
|
||||
|
||||
+#ifdef CONFIG_BCMA_HOST_PCI
|
||||
+extern void bcma_host_pci_up(struct bcma_bus *bus);
|
||||
+extern void bcma_host_pci_down(struct bcma_bus *bus);
|
||||
+extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
|
||||
+ struct bcma_device *core, bool enable);
|
||||
+#else
|
||||
+static inline void bcma_host_pci_up(struct bcma_bus *bus)
|
||||
+{
|
||||
|
|
@ -444,6 +495,13 @@
|
|||
+static inline void bcma_host_pci_down(struct bcma_bus *bus)
|
||||
+{
|
||||
+}
|
||||
+static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
|
||||
+ struct bcma_device *core, bool enable)
|
||||
+{
|
||||
+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
|
||||
+ return -ENOTSUPP;
|
||||
+ return 0;
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
extern bool bcma_core_is_enabled(struct bcma_device *core);
|
||||
|
|
@ -451,15 +509,14 @@
|
|||
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
|
||||
--- a/include/linux/bcma/bcma_driver_pci.h
|
||||
+++ b/include/linux/bcma/bcma_driver_pci.h
|
||||
@@ -238,12 +238,8 @@ struct bcma_drv_pci {
|
||||
@@ -238,12 +238,6 @@ struct bcma_drv_pci {
|
||||
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
|
||||
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
|
||||
|
||||
-extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
|
||||
-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
|
||||
-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
|
||||
+extern int bcma_core_pci_irq_ctl(struct bcma_bus *bus,
|
||||
struct bcma_device *core, bool enable);
|
||||
- struct bcma_device *core, bool enable);
|
||||
-extern void bcma_core_pci_up(struct bcma_bus *bus);
|
||||
-extern void bcma_core_pci_down(struct bcma_bus *bus);
|
||||
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
|
||||
|
|
|
|||
|
|
@ -154,32 +154,47 @@
|
|||
if (err)
|
||||
--- a/drivers/bcma/driver_pci.c
|
||||
+++ b/drivers/bcma/driver_pci.c
|
||||
@@ -282,21 +282,21 @@ void bcma_core_pci_power_save(struct bcm
|
||||
@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
|
||||
|
||||
-int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
|
||||
+int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
|
||||
bool enable)
|
||||
{
|
||||
struct pci_dev *pdev;
|
||||
u32 coremask, tmp;
|
||||
int err = 0;
|
||||
|
||||
- bool enable)
|
||||
-{
|
||||
- struct pci_dev *pdev;
|
||||
- u32 coremask, tmp;
|
||||
- int err = 0;
|
||||
-
|
||||
- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
/* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
* not routed through the PCI core.
|
||||
* So we must not enable routing through the PCI core. */
|
||||
goto out;
|
||||
}
|
||||
|
||||
- /* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
- * not routed through the PCI core.
|
||||
- * So we must not enable routing through the PCI core. */
|
||||
- goto out;
|
||||
- }
|
||||
-
|
||||
- pdev = pc->core->bus->host_pci;
|
||||
+ pdev = bus->host_pci;
|
||||
|
||||
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
if (err)
|
||||
@@ -328,28 +328,12 @@ static void bcma_core_pci_extend_L1timer
|
||||
-
|
||||
- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
- if (err)
|
||||
- goto out;
|
||||
-
|
||||
- coremask = BIT(core->core_index) << 8;
|
||||
- if (enable)
|
||||
- tmp |= coremask;
|
||||
- else
|
||||
- tmp &= ~coremask;
|
||||
-
|
||||
- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
|
||||
-
|
||||
-out:
|
||||
- return err;
|
||||
-}
|
||||
-EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
|
||||
-
|
||||
static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
|
||||
{
|
||||
u32 w;
|
||||
@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer
|
||||
bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
|
||||
}
|
||||
|
||||
|
|
@ -318,7 +333,7 @@
|
|||
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
|
||||
@@ -310,3 +323,31 @@ void __exit bcma_host_pci_exit(void)
|
||||
@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void)
|
||||
{
|
||||
pci_unregister_driver(&bcma_pci_bridge_driver);
|
||||
}
|
||||
|
|
@ -350,6 +365,40 @@
|
|||
+ bcma_core_pci_down(&bus->drv_pci[0]);
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(bcma_host_pci_down);
|
||||
+
|
||||
+/* See also si_pci_setup */
|
||||
+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
|
||||
+ bool enable)
|
||||
+{
|
||||
+ struct pci_dev *pdev;
|
||||
+ u32 coremask, tmp;
|
||||
+ int err = 0;
|
||||
+
|
||||
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
|
||||
+ /* This bcma device is not on a PCI host-bus. So the IRQs are
|
||||
+ * not routed through the PCI core.
|
||||
+ * So we must not enable routing through the PCI core. */
|
||||
+ goto out;
|
||||
+ }
|
||||
+
|
||||
+ pdev = bus->host_pci;
|
||||
+
|
||||
+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
|
||||
+ if (err)
|
||||
+ goto out;
|
||||
+
|
||||
+ coremask = BIT(core->core_index) << 8;
|
||||
+ if (enable)
|
||||
+ tmp |= coremask;
|
||||
+ else
|
||||
+ tmp &= ~coremask;
|
||||
+
|
||||
+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
|
||||
+
|
||||
+out:
|
||||
+ return err;
|
||||
+}
|
||||
+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
|
||||
--- a/drivers/bcma/main.c
|
||||
+++ b/drivers/bcma/main.c
|
||||
@@ -363,7 +363,7 @@ static int bcma_register_devices(struct
|
||||
|
|
@ -377,7 +426,7 @@
|
|||
#ifdef CONFIG_B43_BCMA
|
||||
case B43_BUS_BCMA:
|
||||
- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
|
||||
+ bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
|
||||
+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
|
||||
dev->dev->bdev, true);
|
||||
- bcma_core_pci_up(dev->dev->bdev->bus);
|
||||
+ bcma_host_pci_up(dev->dev->bdev->bus);
|
||||
|
|
@ -400,7 +449,7 @@
|
|||
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
|
||||
*/
|
||||
- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
|
||||
+ bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
|
||||
+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
|
||||
true);
|
||||
|
||||
/*
|
||||
|
|
@ -430,13 +479,15 @@
|
|||
}
|
||||
--- a/include/linux/bcma/bcma.h
|
||||
+++ b/include/linux/bcma/bcma.h
|
||||
@@ -434,6 +434,18 @@ static inline struct bcma_device *bcma_f
|
||||
@@ -434,6 +434,27 @@ static inline struct bcma_device *bcma_f
|
||||
return bcma_find_core_unit(bus, coreid, 0);
|
||||
}
|
||||
|
||||
+#ifdef CONFIG_BCMA_HOST_PCI
|
||||
+extern void bcma_host_pci_up(struct bcma_bus *bus);
|
||||
+extern void bcma_host_pci_down(struct bcma_bus *bus);
|
||||
+extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
|
||||
+ struct bcma_device *core, bool enable);
|
||||
+#else
|
||||
+static inline void bcma_host_pci_up(struct bcma_bus *bus)
|
||||
+{
|
||||
|
|
@ -444,6 +495,13 @@
|
|||
+static inline void bcma_host_pci_down(struct bcma_bus *bus)
|
||||
+{
|
||||
+}
|
||||
+static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
|
||||
+ struct bcma_device *core, bool enable)
|
||||
+{
|
||||
+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
|
||||
+ return -ENOTSUPP;
|
||||
+ return 0;
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
extern bool bcma_core_is_enabled(struct bcma_device *core);
|
||||
|
|
@ -451,15 +509,14 @@
|
|||
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
|
||||
--- a/include/linux/bcma/bcma_driver_pci.h
|
||||
+++ b/include/linux/bcma/bcma_driver_pci.h
|
||||
@@ -238,12 +238,8 @@ struct bcma_drv_pci {
|
||||
@@ -238,12 +238,6 @@ struct bcma_drv_pci {
|
||||
#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
|
||||
#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
|
||||
|
||||
-extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
|
||||
-extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
|
||||
-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
|
||||
+extern int bcma_core_pci_irq_ctl(struct bcma_bus *bus,
|
||||
struct bcma_device *core, bool enable);
|
||||
- struct bcma_device *core, bool enable);
|
||||
-extern void bcma_core_pci_up(struct bcma_bus *bus);
|
||||
-extern void bcma_core_pci_down(struct bcma_bus *bus);
|
||||
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
|
||||
|
|
|
|||
Loading…
Reference in New Issue