592f2c6e2b
ath9k: add some more fixes for the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
2013-08-06 10:30:58 +00:00
3f351e2770
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
9d4145efe5
kernel: fix DMA error when BCM4331 is connected to BCM4706
...
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
6743f2625b
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
2013-08-05 10:32:13 +00:00
259c36358f
mac80211: fix rt2x00 dependency
...
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
885cf1f19f
mac80211: rt2x00: fix LED polarity patch
...
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
2013-08-05 09:09:41 +00:00
3573494b19
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
...
Closes #13951 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
c7976ae5f8
mac80211: add rtlwifi drivers
...
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
2fcaba306e
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
2013-08-04 12:36:13 +00:00
0d9ecfa564
kernel: kmod-appletalk: fix dependencies
...
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
2013-08-04 09:51:07 +00:00
7dea39fda2
broadcom-diag: show error message in case something goes wrong with gpio irq
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
2013-08-03 17:12:07 +00:00
309123bbfd
broadcom-diag: add gpio config for Asus RT-N66U
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
2013-08-03 17:10:37 +00:00
b1b3067a12
broadcom-diag: add gpio config for Linksys E4200v1
...
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
2013-08-03 17:09:39 +00:00
18e37d8caf
gpio-button-hotplug: cleanup, fix compiler warning
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
2013-08-03 11:56:27 +00:00
4281026dda
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
2013-08-03 11:49:50 +00:00
d2ed54596d
kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set
...
SVN-Revision: 37661
2013-08-03 10:10:16 +00:00
f43b6b2bea
kernel: add missing module to video-core for kernel < 3.6
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37659
2013-08-02 20:08:20 +00:00
65ef965e6e
kernel: fix usb-chipidea compilation with kernel <= 3.9
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37658
2013-08-02 20:07:11 +00:00
58274d68fb
broadcom-diag: add support for the ASUS RT-N12
...
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37655
2013-08-02 15:44:04 +00:00
af970e66bf
broadcom-diag: increase version number
...
There are some changes in there and this should be rebuild.
SVN-Revision: 37654
2013-08-02 15:06:14 +00:00
1972a131a0
mac80211: backport a few upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37653
2013-08-02 10:02:35 +00:00
0fe808d032
kernel: load libphy before tg3
...
SVN-Revision: 37651
2013-08-01 22:19:19 +00:00
2b55968f5d
brcm47xx: improve detection of Linksys WRTSL54GS
...
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
2013-08-01 19:33:59 +00:00
1eabf431df
gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
...
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions. At leat 1 button is in pressed state
in any of those positions. Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37643
2013-08-01 14:31:28 +00:00
ef96422920
gpio-button-hotplug: use gpio_button_get_value() to fetch state.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37642
2013-08-01 14:31:24 +00:00
2c19af6ac5
gpio-button-hotplug: add inline function gpio_button_get_value().
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37641
2013-08-01 14:31:20 +00:00
e77339b9e2
broadcom-wl: fix compile error with kernel 3.10
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37626
2013-07-31 17:42:55 +00:00
5bd3f8b164
mac80211: rt2x00: add missing of.h header
...
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37618
2013-07-29 22:45:57 +00:00
36e6d4ca53
ath9k: fix several issues in the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37616
2013-07-29 19:44:05 +00:00
2b906791be
mac80211: rt2x00: fix default register settings for rt5350
...
Comparing the RTSDK driver and mac80211 revealed, that this register needs
to have a special setup on rt5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37608
2013-07-29 13:10:12 +00:00
7f895c6776
mac80211: rt2x00: enable setting wifi led polarity from OF
...
This patch enables setting the wifi led polarity from OF.
It can be used in a DTS' wmac section like this:
ralink,led-polarity = <1>;
Valid values are 0 or 1.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37607
2013-07-29 13:09:16 +00:00
1ff304e5f5
rt2x00: merge fix for queue stopping
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37603
2013-07-29 12:49:01 +00:00
c67a12711d
mac80211: add support for verbose builds using V=sc
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37597
2013-07-29 09:38:08 +00:00
181cb9f3fa
kernel: add usb-mxs-phy package
...
SVN-Revision: 37580
2013-07-28 20:34:18 +00:00
cc4bda8d67
kernel: update usb-chipidea package
...
SVN-Revision: 37579
2013-07-28 20:34:17 +00:00
769f986d9a
kernel: update usb2 package
...
SVN-Revision: 37578
2013-07-28 20:34:09 +00:00
4176b6fdd3
strict_strtoul is obsolete, use kstrtoul instead
...
based on http://patchwork.openwrt.org/patch/3827/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37562
2013-07-27 09:23:18 +00:00
4478c69b86
authsae: adapt uci scripts to use authsae
...
This patch modifies the uci scripts to be able to
start meshd-nl80211 for encrypted mesh networks,
therefor a new script (authsae.sh) is inserted.
Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
[etienne.champetier@free.fr: just update mac80211.sh path]
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 37554
2013-07-26 10:02:59 +00:00
aa81b9ed5f
kernel: be consistent with formatting style
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37545
2013-07-26 01:09:50 +00:00
3251cddf31
mac8021: add ath9k pcie id for AR9381
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37536
2013-07-25 20:28:45 +00:00
b037b0011e
kernel: ebtables depends on bridge
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37520
2013-07-23 19:53:08 +00:00
06a27059bd
lantiq: dont build ar10 drivers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37500
2013-07-22 13:53:01 +00:00
94439c2b5d
kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37491
2013-07-21 11:55:30 +00:00
11c5730695
kernel: fix config breakage from removing the de4x5 tulip driver
...
Properly define the config symbol to n so it doesn't break build for
targets which do have it available (e.g. mostly everything except arm).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37489
2013-07-21 11:08:38 +00:00
c493e45058
kernel: fix kmod-crypto-hw-ppc4xx dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37488
2013-07-21 08:20:01 +00:00
2ea287816c
kernel: add missing config symbol for the chipidea usb driver
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37487
2013-07-21 08:19:58 +00:00
4332b7fce5
kernel: remove an exotic ethernet driver from the tulip package which does not build on some platforms
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37486
2013-07-21 08:06:56 +00:00
0494ec45f1
kernel: fix crypto-hw-talitos dependencies
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37485
2013-07-20 20:44:40 +00:00
a0129dfd8e
ath9k: add initial tx queueing rework patches
...
This forces all packets (even for un-aggregated traffic) through
software queues to improve fairness and stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37483
2013-07-20 16:37:50 +00:00
9ba76039d6
kernel: fix kmod-fs-btrfs dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37466
2013-07-19 23:10:40 +00:00
Felix Fietkau
Hauke Mehrtens
Gabor Juhos
Jonas Gorski
John Crispin
Luka Perkov