Commit Graph

1063 Commits (4d5b5c82e1304d85e3fbae445c42d36942a2cbe0)

Author SHA1 Message Date
Jonas Gorski b339304425 brcm63xx: Add DT support for HG553
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix linux partition length]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42247
2014-08-21 11:28:54 +00:00
Jonas Gorski 2f09960e46 brcm63xx: Add DT support for HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42246
2014-08-21 11:28:46 +00:00
Jonas Gorski 7bc83fdd13 brcm63xx: Add DT support for A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42245
2014-08-21 11:28:43 +00:00
Jonas Gorski a180c80f23 brcm63xx: Add DT support for A4001N1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42244
2014-08-21 11:28:40 +00:00
Jonas Gorski 83651bad85 brcm63xx: Add DT support for WAP-5813n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42243
2014-08-21 11:28:37 +00:00
Jonas Gorski 7b2d74a156 brcm63xx: Add DT support for VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42242
2014-08-21 11:28:34 +00:00
Jonas Gorski 42bbf7bcb3 brcm63xx: Add DT support for VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42241
2014-08-21 11:28:32 +00:00
Jonas Gorski 2936cacdfc brcm63xx: Add DT support for AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42240
2014-08-21 11:28:28 +00:00
Jonas Gorski b97aa0b4fd brcm63xx: Add DT support for AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42239
2014-08-21 11:28:18 +00:00
Jonas Gorski 1891b08f00 brcm63xx: Add DT support for CT-6373
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42238
2014-08-21 11:28:14 +00:00
Jonas Gorski e490cc7e14 brcm63xx: Add DT support for CT-5365
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42237
2014-08-21 11:28:10 +00:00
Jonas Gorski e46d57b3af brcm63xx: use DT for partitions on SPW500V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42236
2014-08-21 11:28:01 +00:00
Jonas Gorski 84001352fd brcm63xx: dts: fix spelling of "bank-width"
Fixes pflash registration through DT for 6338/6345/6348.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42235
2014-08-21 11:27:56 +00:00
Jonas Gorski 33e2a51d4d brcm63xx: dsl-274xb-c: linux partition should not be read-only
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42234
2014-08-21 11:27:44 +00:00
Jonas Gorski 770ba9d40f brcm63xx: enable fallback sprom for Speedport W500 V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42211
2014-08-18 21:50:45 +00:00
Jonas Gorski ddbff6a198 brcm63xx: tag images/dtbs with profiles
This prevents generating every supported image, except for de "Default" profile.
Also fixes Neufbox 6 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
Jonas Gorski 3db93a3351 brcm63xx: add profiles for DTB supported devices
Remove generic profiles and add profiles for each DTB supported device.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42209
2014-08-18 21:50:40 +00:00
Jonas Gorski 84ea696e03 brcm63xx: move generic profiles to top dir and remove smp profiles
Use generic profiles for brcm63xx instead of having similar profiles for
each subtarget.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42208
2014-08-18 21:50:37 +00:00
Jonas Gorski 4e708346cd brcm63xx: simplify HG556a image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42207
2014-08-18 21:50:34 +00:00
Jonas Gorski 29e4d82dbb brcm63xx: fix HG556a boards and remove fallback board
This changes board info to match the Wiki
http://wiki.openwrt.org/toh/huawei/hg556a, removes the no longer needed
fallback board and fixes HG556 Ralink eeprom extraction.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: rename partitions instead]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42206
2014-08-18 21:50:29 +00:00
Jonas Gorski 43029544e2 brcm63xx: remove now obsolete board fixup code
Now that we migrated all users to dtb based detection, we can drop the
board fixup code.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42129
2014-08-11 11:37:26 +00:00
Jonas Gorski 74ec41ef59 brcm63xx: use dtb board detection for neufbox 4
This splits up neufbox 4 for now into two images, one for each OEM.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42128
2014-08-11 11:37:21 +00:00
Jonas Gorski 862f7fccb0 brcm63xx: use dtb board detection for NB6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42127
2014-08-11 11:37:17 +00:00
Jonas Gorski 52b0935efe brcm63xx: use dtb board detection for HW556
This requires individual images for each board version for now.
Linux partition was shrunk to ensure writing thewrong image won't
erase wifi calibration data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42126
2014-08-11 11:37:14 +00:00
Jonas Gorski 0aa242fe20 brcm63xx: replace CFEFIXUP usage with dtb based detection
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42125
2014-08-11 11:37:09 +00:00
Jonas Gorski f22bab1017 brcm63xx: move bcm96328avng to dtb detection
Use appended dtb for board detection for bcm96328avng.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42124
2014-08-11 11:37:04 +00:00
Jonas Gorski 9c6287d6a1 brcm63xx: add support for registering parallel flash through dtb
Add the required nodes to the dtsi files and code to prevent double
registration from the board support code.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42123
2014-08-11 11:37:01 +00:00
Jonas Gorski 79057c7255 brcm63xx: add helpers for building cfe images with dtb
Add a helper for building images with dtb appended kernels.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42122
2014-08-11 11:36:59 +00:00
Jonas Gorski aa572fccb5 brcm63xx: add support for attaching dtbs to lzma kernels
In preparation for switching to dtb based board identification, add
support for building lzma-loader and lzma cfe kernels with dtb
appended.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42121
2014-08-11 11:36:55 +00:00
Jonas Gorski 0343c0288e brcm63xx: add empty dtsi files for each of the supported SoCs
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42120
2014-08-11 11:36:53 +00:00
Jonas Gorski de8e3f2f86 brcm63xx: add and enable support for loading an appended dtb
Allow appending a dtb blob to the binary and use it for identifying the
board. Fall back to nvram based identification in case of no dtb passed.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42119
2014-08-11 11:36:48 +00:00
Jonas Gorski b61f57a5c7 brcm63xx: correctly export fallback sprom for brcm-wl
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42118
2014-08-11 11:36:41 +00:00
Jonas Gorski 97d0ed4faa brcm63xx: make board patch context less ambiguous
Make it less likely for quilt/patch to put boards into the "wrong"
section.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42117
2014-08-11 11:36:38 +00:00
Jonas Gorski a06013e9b7 brcm63xx: fix board patches offsets
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo fix 553-boards_probe_switch.patch]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42116
2014-08-11 11:36:30 +00:00
Jonas Gorski 48318b52af brcm63xx: Add fallback sprom for A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42110
2014-08-10 12:22:15 +00:00
Jonas Gorski f30102c6c2 brcm63xx: Add fallback sprom for HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42109
2014-08-10 12:22:12 +00:00
Jonas Gorski e07dc84b24 brcm63xx: Add fallback sprom for P870HW-51a
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42108
2014-08-10 12:22:10 +00:00
Jonas Gorski 568a15adb3 brcm63xx: Add fallback sprom for VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42107
2014-08-10 12:22:08 +00:00
Jonas Gorski d3af37fdfb brcm63xx: Add fallback sprom for VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42106
2014-08-10 12:22:05 +00:00
Jonas Gorski 6eb9375da4 brcm63xx: Add fallback sprom for WAP-5813n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42105
2014-08-10 12:22:02 +00:00
Jonas Gorski 061f738087 brcm63xx: Add fallback sprom for AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42104
2014-08-10 12:21:59 +00:00
Jonas Gorski 23df30ca4a brcm63xx: Add fallback sprom for AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42103
2014-08-10 12:21:55 +00:00
Jonas Gorski d1f731866b brcm63xx: Add fallback sprom for A4001N1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42102
2014-08-10 12:21:52 +00:00
Jonas Gorski 312a7f9883 brcm63xx: Add fallback sprom for CT6373
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42101
2014-08-10 12:21:48 +00:00
Jonas Gorski 8240f6ad54 brcm63xx: Add fallback sprom for CT5365
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42100
2014-08-10 12:21:44 +00:00
Jonas Gorski a299702df0 brcm63xx: Add fallback sprom for CT5361_CT5621
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42099
2014-08-10 12:21:39 +00:00
Jonas Gorski a166e05188 brcm63xx: Add fallback sprom for Huawei HG553
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42098
2014-08-10 12:21:34 +00:00
Jonas Gorski 02e78b9bd8 brcm63xx: Fix fallback sprom il0mac
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42097
2014-08-10 12:21:30 +00:00
Luka Perkov dd8d729096 kernel: update 3.14 to 3.14.16
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42070
2014-08-08 13:38:22 +00:00
Jonas Gorski 930e3e7ca3 brcm63xx: add preliminary support for D-Link DSL-2751B E1
Mostly works except for USB led. Flashing not tested yet. Mostly
as an example for the sprom fixup code.

Fixup values taken from GPL tarball by comparing bcm43217_map.c
with the struct in sprom.c.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41944
2014-08-01 21:56:46 +00:00
Jonas Gorski 76746026b3 brcm63xx: rework fallback sprom support
Rework fallback sprom support by providing different sproms for
different chips. Also make it optional to use.

This likely causes sprom fallback support to break on a few boards.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41942
2014-08-01 21:56:38 +00:00
Jonas Gorski faa51b307c brcm63xx: switch to 3.14
Now that BB is branched off, we can now switch to 3.14 and start
breaking stuff again.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41941
2014-08-01 21:56:35 +00:00
Jonas Gorski 701e2a38fe brcm63xx: add working lzma-loader and use it for initramfs
Add a working lzma loader and use it for generating initramfs kernels
to allow easily netbooting elf kernels on devices with a 4 MiB CFE
size limit.

Based on ar71xx's lzma-loader.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41940
2014-08-01 21:56:31 +00:00
Jonas Gorski b723119385 brcm63xx: replace nvram_buf with a properly initialized array
Use an empty nvram_header to tell wl that there is no nvram buf.
wl else might try to allocate huge amount of memory because the
bcm63xx's nvram does not match the expected structure and contains
random values.

Fixes the following warning on load of wl:

[    9.152000] WARNING: at mm/slab_common.c:377 kmalloc_slab+0x4c/0xc0()
[    9.160000] Modules linked in: wl(P+) wl_glue ipv6 gpio_keys_polled input_polldev button_hotplug input_core
[    9.168000] CPU: 0 PID: 366 Comm: kmodloader Tainted: P             3.10.49 #1
[    9.176000] Stack : 00000000 00000000 00000000 00000000 8034b77a 00000042 81ac9af0 c02e0000
[    9.176000]    8028bf70 802df31b 0000016e 8034af28 81ac9af0 c02e0000 c02e0000 81b39810
[    9.176000]    0000002d 8002c9d4 00000003 8002a3c8 802937a0 c02e0000 8028e528 81ab398c
[    9.176000]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    9.176000]    00000000 00000000 00000000 00000000 00000000 00000000 00000000 81ab3918
[    9.176000]    ...
[    9.212000] Call Trace:
[    9.216000] [<800224b8>] show_stack+0x48/0x70
[    9.220000] [<8002a538>] warn_slowpath_common+0x78/0xa8
[    9.224000] [<8002a5f0>] warn_slowpath_null+0x18/0x24
[    9.228000] [<8008145c>] kmalloc_slab+0x4c/0xc0
[    9.236000] [<80097258>] __kmalloc+0x20/0x10c
[    9.240000] [<80e23b90>] osl_malloc+0x24/0x6c [wl]
[    9.244000] [<80e15288>] nvram_init+0x54/0x164 [wl]
[    9.252000] [<80e08668>] si_pci_fixcfg+0x60c/0x9e8 [wl]
[    9.256000]
[    9.260000] ---[ end trace b5c4dbb046cf3c83 ]---

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41861
2014-07-28 15:31:37 +00:00
Jonas Gorski 042fb8eb57 brcm63xx: 3.14: fix ath9k_pci_fixup
Since kernel commit 928bea964827 ("PCI: Delay enabling bridges until
they're needed"), pci fixups are run with bridges (e.g. the pcie port)
disabled.

This causses hangs when ath9k_pci_fixup tries to manually enable the
device to apply the register fixups.

Fix this by enabling any parent bridges before trying to access the
device itself.

Fixes boot on DSL-274XB rev F1.

Reported-by: Matteo Croce <matteo@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41856
2014-07-28 11:12:25 +00:00
Jonas Gorski 1cb1041c55 brcm63xx: Add support for ADB P.DG A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41852
2014-07-27 17:44:59 +00:00
Jonas Gorski 3209fb968e brcm63xx: Add support for Huawei HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41851
2014-07-27 17:44:56 +00:00
Jonas Gorski c27cb6e0fd brcm63xx: Add support for ZyXEL P870HW-51a v2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41850
2014-07-27 17:44:53 +00:00
Jonas Gorski b26139eb3f brcm63xx: Add support for Comtrend VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41848
2014-07-27 17:44:48 +00:00
Jonas Gorski a669d2c528 brcm63xx: Add support for Comtrend VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41847
2014-07-27 17:44:45 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Jonas Gorski 2b6403722b brcm63xx: update irq affinity code to latest version
Reduces code size a bit and sets affinity to boot cpu by default.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41591
2014-07-12 12:31:47 +00:00
Jonas Gorski ba9d2f397a brcm63xx: base-files: order board names alphabetically
Restore alphatetical order in uci-defaults scripts and brcm63xx.sh

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41590
2014-07-12 12:31:45 +00:00
Jonas Gorski 44e187fd66 brcm63xx: Use leds script for Huawei HG556a and improve profile
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41589
2014-07-12 12:31:43 +00:00
Jonas Gorski e5cadabb58 brcm63xx: Fix HW553 support
- adsl and lan leds are swapped.
- internetkey is labeled as hspa.
- enable status led and reset button for failsafe.
- use new leds script.
- fix switch configuration.
- remove enet0 from board_info.
- add profile.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41588
2014-07-12 12:31:39 +00:00
Jonas Gorski beb25f96eb brcm63xx: Use model name for Comtrend AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41587
2014-07-12 12:31:35 +00:00
Jonas Gorski c9b2e96909 brcm63xx: Use model name for Comtrend AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41586
2014-07-12 12:31:33 +00:00
Jonas Gorski aee666d8f9 brcm63xx: Use model name for ADB P.DG A4001N1
This patch also makes use of the new leds script.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41585
2014-07-12 12:31:30 +00:00
Jonas Gorski 8630d101b7 brcm63xx: fixup patches borked by allowing too much fuzz
Move defines and board_info structs back to their proper locations so
(de-)selecting SOC support won't break the build.

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41550
2014-07-08 12:27:55 +00:00
Jonas Gorski ffae660fbd brcm63xx: disable AUDIT
Reduces kernel size by about 24k (6k compressed).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41506
2014-07-04 08:23:19 +00:00
Jonas Gorski 2289e58252 brcm63xx: fix Livebox 1 support
The Livebox 1 support is currently broken. Fixed with this patch

Fixes:
- Redboot partitioning broken: fixed
- Replaced custom ephy reset with platform code
- USB code breaks the building process: fixed
- Led colors
- Removed unneded EHCI code since bcm6348 only has OHCI

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: drop unneded parts since merge, fixup to apply to current head]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41424
2014-06-30 13:34:43 +00:00
Jonas Gorski dc230d9b0f brcm63xx: 3.10: backport multi-board support
There have been no reported regressions, so backport it to 3.10.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41422
2014-06-30 13:34:37 +00:00
Jonas Gorski 44ef9f7789 brcm63xx: Add support for Comtrend WAP-5813n
This adds support for Comtrend WAP-5813n.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: refresh patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41421
2014-06-30 13:34:34 +00:00
Jonas Gorski 439fe41813 brcm63xx: CPVA502+ board fixes
Some fixes for Telsey CPVA502+ bcm6348 routers:
- reset the external PHY (eth1) with proper platform code, not using a led definiton
- eth1 is an external phy, not a switch, deleted forced link speed
- fixed led color

Patch made for 3.14 kernel patches.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: also fix 3.14, refresh patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41420
2014-06-30 13:34:28 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Jonas Gorski 43cc8c3ebe brcm63xx: allow bcm963xx and livebox support at the same time
Use the CFE_EPTSEAL to tell them apart at runtime. Added for now only
for the 3.14 until properly tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41296
2014-06-21 19:23:38 +00:00
Jonas Gorski 21d65bb185 brcm63xx: update variant detection patches and fix VARID shift
The variant id field shift was wrong, causing the variant detection
to fail.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41295
2014-06-21 19:23:28 +00:00
Jonas Gorski f695fa358a brcm63xx: fix up borked patch
Fix up patch borked by quilt fuzzy application of patches.

SVN-Revision: 41294
2014-06-21 19:23:18 +00:00
John Crispin f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Jonas Gorski dba8a58b46 brcm63xx: hack around jffs2 corruption with SMP
mempy_fromio seems to be randomly failing when the destination is
unaligned; work around it by forcing the name to be aligned in memory.

Should fix jffs2 and SMP for now, but needs to be some additional
looking into as it does not fix the source.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40396
2014-04-06 22:03:42 +00:00
Jonas Gorski 663083d930 brcm63xx: sync mips counters during bringup of cpus
Fixes gettimeofday returning different values depending on which cpu
it is called.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40387
2014-04-05 18:32:34 +00:00
Jonas Gorski b519908e84 brcm63xx: update development kernel to linux 3.14
Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380
2014-04-04 10:17:08 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Jonas Gorski 0d120f42da brcm63xx: add preliminary support for 3.13
Add support for 3.13 as a development kernel. Mostly untested, only net
booted. If flashed may brick your router or kill your cat.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39746
2014-02-24 15:54:12 +00:00
Gabor Juhos b5fdd769f0 brcm63xx: update LINUX_VERSION to 3.10.32
Missed from the previous comit.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39708
2014-02-23 11:07:58 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Jonas Gorski b8ed6534ca brcm63xx: fix RG100A/DB120 usb port number
Set usbh ports to 2 to fix #15007.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39681
2014-02-22 11:16:52 +00:00
Jonas Gorski 4a2f87bce0 brcm63xx: fix number of usb ports for HW556 variants
Don't only fix up the fallback board, but also all three variants.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39680
2014-02-22 11:16:50 +00:00
Jonas Gorski ece12908a8 brcm63xx: add initial support for BCM963268BU_P300 reference board
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39679
2014-02-22 11:16:48 +00:00
Jonas Gorski f6c4b1eb29 brcm63xx: add VW6339GU support
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39678
2014-02-22 11:16:46 +00:00
Jonas Gorski 60edb75e47 brcm63xx: fix number of switch ports for BCM63168/63268
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39677
2014-02-22 11:16:44 +00:00
Jonas Gorski edbfb81b56 brcm63xx: F@ST2504n board support (image, base-files)
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39676
2014-02-22 11:16:42 +00:00
Jonas Gorski 84dc1f1209 brcm63xx: F@ST2504n board support
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4729/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39675
2014-02-22 11:16:40 +00:00
Jonas Gorski ce655b93cd brcm63xx: add support for Asmax AR 1004g router
Support for Asmax AR 1004g router

Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39674
2014-02-22 11:16:38 +00:00
Jonas Gorski fa26229e8b brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL router
This adds profile and build image for Sagemcom F@st2704, using b43
driver.
For WiFi to work properly BCMA fallback SPROM support patch must
be applied (http://git.io/z1Ki8A).

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4212/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39673
2014-02-22 11:16:35 +00:00
Jonas Gorski fe37b14fca brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router
This adds userspace support for Sagemcom F@st 2704 router.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4215/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39672
2014-02-22 11:16:33 +00:00
Jonas Gorski f92b2a956b brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4266/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39671
2014-02-22 11:16:30 +00:00
Florian Fainelli 87f8092629 brcm63xx: fix warning in Redboot code
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39404
2014-01-27 04:34:39 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Florian Fainelli a747611fe3 brcm63xx: enable support for BCM63268
Support for the BCM63268 is usable, enable it by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39364
2014-01-21 18:50:26 +00:00
Florian Fainelli eaa3e9ec6e brcm63xx: add support for BCM963269BHR board
Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39363
2014-01-21 18:50:11 +00:00
Florian Fainelli fed4b02a68 brcm63xx: improve BCM63268 support
Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39362
2014-01-21 18:49:50 +00:00
Jonas Gorski d513c07d2f brcm63xx: fix typo breaking build in r39325
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39326
2014-01-19 14:00:18 +00:00
Jonas Gorski 66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00
Jonas Gorski ef81c6a268 brcm63xx: allow setting the number of usb host ports for boards
Allow setting the number of available usb host ports for boards with
additional sanity checks to allow using the second port on devices
where it is available.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39324
2014-01-19 13:46:14 +00:00
Jonas Gorski 6b3e1c8de6 brcm63xx: add USB support for BCM63268
Add and enable USB support for the BCM63268 family of SoCs.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39323
2014-01-19 13:46:05 +00:00
Jonas Gorski 33f426c795 brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI too
USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI
and BCM63XX_HAS_OHCI are not selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39322
2014-01-19 13:45:55 +00:00
Jonas Gorski 52b7f55cb3 brcm63xx: prevent usb clock state inconsistency on BCM6318
Return the same clock for usbh and usbd on BCM6318 to prevent the clock
getting disabled despite being supposed to be enabled, e.g. by the
following sequence:

	clk_enable(usbh); <- usbh->usage = 1, enabled
	clk_enable(usbd); <- usbd->usage = 1, enabled (no effect)
	clk_disable(usbd); <- usbd->usage = 0,  -> disabled!

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
Florian Fainelli 0650ce9ec4 brcm63xx: do not add twice the same field to board
Changeset r39302 updated a board section and added twice .has_ehci0,
this is not necessary, so fix it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39304
2014-01-16 00:45:19 +00:00
Florian Fainelli bf4f1feb7a brcm63xx: add USB support to BCM6318
BCM6318 has a special initialization sequence which involves touching
PLL control registers in the USBH_PRIV register space, as well as
toggling a bit the Simulation control register.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39302
2014-01-15 19:05:57 +00:00
Florian Fainelli 3114410a13 brcm63xx: fix BCM96318MVWG LEDs
Power LED is not active low, and ppp-fail is red, not green.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39294
2014-01-15 00:06:08 +00:00
Florian Fainelli 1f7edcf637 brcm63xx: remove config-3.11
This was not supposed to be committed, remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39293
2014-01-15 00:05:51 +00:00
Florian Fainelli bd540554a4 brcm63xx: 96368MVWG supports USB gadget, enable it
Enable the use of the USB gadget device at the board level so we can use
bcm63xx_udc on this board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39292
2014-01-14 23:56:46 +00:00
Florian Fainelli 092a7105ec brcm63xx: replace gadget driver build fix with upstream submission
Also fixing a build warning due to a misplaced parenthesis in the
previous submission.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39291
2014-01-14 23:56:28 +00:00
Florian Fainelli 01f465df05 brcm63xx: add support for the BCM96318REF_P300 board
Very similar to the BCM96318REF board except for the name and the
SDRAM/DDR configuration which is totally transparent for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39286
2014-01-14 05:24:19 +00:00
Florian Fainelli 6f48336dc4 brcm63xx: enable 6318 support
BCM6318 support is usable enough to be enabled by default, turn it on.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39284
2014-01-14 05:23:58 +00:00
Florian Fainelli 93ab8adef2 brcm63xx: add basic support for the BCM96318REF board
Add basic support for the BCM96318REF board which is comprised of:
- HS-SPI flash support
- Ethernet switch support
- USB slave device support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39283
2014-01-14 05:23:49 +00:00
Florian Fainelli 0ecdc42f60 brcm63xx: improve BCM6318 support
Provide clock toggling for the USB host and slave controller as well as
for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use
request_mem_region() as the Roboswitch register overlaps with the
Roboswitch IUDMA channels, hence making the driver return -EBUSY. A
future fix might be to use variable size RSET_ENETSW sizes depending on
the chip we are targetting.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
Florian Fainelli 7951993efd brcm63xx: package the USB gadget module (bcm63xx_udc)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39281
2014-01-14 05:23:20 +00:00
Florian Fainelli 8bdc92f5d6 brcm63xx: target supports USB gadget devices
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39280
2014-01-14 05:23:08 +00:00
Florian Fainelli fb8ae05760 brcm63xx: fix USB gadget build failure after 6345 Ethernet
While adding support for BCM6345 Ethernet, some changes in the macros
ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget
driver fail to build. Fix this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39279
2014-01-14 05:22:59 +00:00
Florian Fainelli a6425f8437 brcm63xx: allow HSSPI registration on 6318
A missing condition check in dev-hsspi.c prevented the controller from
being registered on 6318 where it is fully functional.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39278
2014-01-14 05:22:45 +00:00
Florian Fainelli 49ae212eee brcm63xx: fix build failure on varid
varid might both unused and unitialized when building for e.g: bcm6318,
fix these two warnings turned into errors.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39277
2014-01-14 05:22:31 +00:00
Jonas Gorski e83c1ec61c brcm63xx: fix ohci frame number offset
BCM63XX's ohci controller does not need the frame number shift, but that
was guarded with a PPC symbol. Fix this by making the no-fix generally
available.

This is a regression from the previous conversion to ohci platform driver.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39274
2014-01-13 12:21:08 +00:00
Jonas Gorski 1315058bda brcm63xx: fix spi flash setup on (at least) some reference boards
CFE seems to leave the SPI flash mapping in an invalid state after
loading the kernel on some reference boards, so fix it up on boot.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39273
2014-01-13 12:14:12 +00:00
Jonas Gorski 4aa92df0d8 brcm63xx: add initial support for BCM6318
Add inital support for BCM6318, but keep it disabled for now until
most things are supported.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39272
2014-01-13 12:14:02 +00:00
Jonas Gorski 3bdcf040aa brcm63xx: add initial support for BCM63268
Add initial support for the BCM63268 family of SoCs, but keep it
disabled for now as most things don't work yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39271
2014-01-13 12:13:51 +00:00
Jonas Gorski ab8897045c brcm63xx: fix the pcie window size
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big,
not 16 MiB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39270
2014-01-13 12:13:39 +00:00
Jonas Gorski 76164e1a36 brcm63xx: add support for chip variants
Some SoCs have variants which are mostly the same, but use a different
chip id (or not). Add code for detecting them and handling them as
their standard counterparts.

This adds support for e.g. BCM6369.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39269
2014-01-13 12:13:26 +00:00
Jonas Gorski db36359f48 brcm63xx: remove non runtime detect and refresh affinity patches
Remove the non runtime detect code since its effectiveness is dubious
and almost never used.
Also update affinity patches to work on top of it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39268
2014-01-13 12:13:15 +00:00
Jonas Gorski d8ac24b325 brcm63xx: update bmips patches with upstream submission
Update bmips cleanup patches with upstream submission and backport a few
bmips fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39267
2014-01-13 12:13:05 +00:00
Jonas Gorski d9a20b6f46 brcm63xx: spi flash on legacy spi controller needs the workaround
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs
additional fixes for M25P80, so it remains broken for now.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39266
2014-01-13 12:12:50 +00:00
Jonas Gorski af7e570c3b brcm63xx: fix legacy spi tranfers >= 256 bytes
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes
are not affected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39265
2014-01-13 12:11:58 +00:00
Jonas Gorski f08f0cafc2 brcm63xx: update HSSPI driver with upstream submission
Update the HSSPI driver with the upstream submitted one that has a
workaround for the auto cs down issue.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39264
2014-01-13 12:11:45 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens 81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
Gabor Juhos 9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Hauke Mehrtens c75a970337 kernel: b53: add Register Access Bridge Registers (SRAB) interface
The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38198
2013-09-25 21:44:28 +00:00
Gabor Juhos 554772a665 kernel: update 3.10 to 3.10.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38000
2013-09-15 16:00:41 +00:00
Jonas Gorski f8cd14921d brcm63xx: drop linux 3.9 support
It is EOL since quite a while, so no need to keep it around.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37911
2013-09-06 19:01:17 +00:00
Jonas Gorski dc028776f0 brcm63xx: switch to linux 3.10
3.10 is stable enough, and 3.9 is EOL since a while.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37910
2013-09-06 19:01:13 +00:00
Gabor Juhos 043edd8074 kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37832
2013-08-23 17:31:04 +00:00
Gabor Juhos 6a5b4ec7dc kernel: update 3.9 to 3.9.11
Also refresh 3.9 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
Jonas Gorski 7ef37c8e3e brcm63xx: add linux 3.10 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37481
2013-07-20 11:30:26 +00:00
Felix Fietkau 9a9d97b749 bcm63xx: update ralink wlan firmware hotplug script for new eeprom size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37337
2013-07-15 11:07:59 +00:00
Hauke Mehrtens e574f75d16 kernel: update to kernel 3.9.10 and refresh patches
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
Jonas Gorski 0d9f760f27 kernel: update linux 3.9 to 3.9.8
Includes memory allocation fixes as well as several networking fixes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
Jonas Gorski 6a4e78dca6 brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds
- Some fixes for the incorrect GPIO assignment of leds on Huawei HW556.
- Addition of unassigned (LAN) leds which can be found on the back of the device.

Signed-off-by: Angga Reza Fardana <angga@norture.com>
Patchwork: http://patchwork.openwrt.org/patch/3744/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37102
2013-06-30 13:10:08 +00:00
Jonas Gorski 7d1cd9dfab bcm63xx: Improve CFE version mod patch.
Fix "cfe-" string length copy.
Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f.
Add support for Huawei CFE versions ("cfe-vd").

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3766/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37101
2013-06-30 13:10:05 +00:00
Jonas Gorski 6df83c3f89 bcm63xx: enable all SoCs for both subtargets
Now that SMP kernels also work on older SoCs, also enable them for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37100
2013-06-30 13:10:03 +00:00
Jonas Gorski e7d93889d7 bcm63xx: make smp kernels boot on older SoCs
Enhance BMIPS support so SMP kernels work on older chips.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37099
2013-06-30 13:10:00 +00:00
Jonas Gorski 66f8f30f47 bcm63xx: update patches
Update patches with their upstream versions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37098
2013-06-30 13:09:50 +00:00
Florian Fainelli 6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Jonas Gorski 9a077f70de bcm63xx: fix DSL-274xB F1 default network config
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37032
2013-06-24 20:35:54 +00:00
John Crispin 67f5f188b1 base-files: input/button drivers get loaded before preinit by procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
John Crispin e6ef318802 base-files: diag does not need to insmod any drivers, procd already did it for us
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
Florian Fainelli 4ef56823e0 brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36979
2013-06-20 18:47:36 +00:00
Florian Fainelli 28535aad38 brcm63xx: refresh 3.9 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36958
2013-06-18 10:54:28 +00:00
Florian Fainelli a9d4bdee43 brcm63xx: provide a default sane MAC address for Cable Modem devices
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36957
2013-06-18 10:54:24 +00:00
Florian Fainelli 8ae2b1155d brcm63xx: create initramfs HCS images
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
Florian Fainelli 0ce75bc440 brcm63xx: simplify HCS image creation
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36949
2013-06-17 19:32:56 +00:00
Florian Fainelli 78a66975d6 brcm63xx: remove support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36948
2013-06-17 19:32:47 +00:00
Florian Fainelli d2894412d8 brcm63xx: switch to 3.9 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36947
2013-06-17 19:32:42 +00:00
Florian Fainelli f03bbaf065 brcm63xx: fix missing antislash in BCM6345 ethernet patch
This would cause build failure when disabling support for particular
CPUs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36946
2013-06-17 19:32:35 +00:00
Florian Fainelli 2b9d084af9 brcm63xx: add user-space support for Netgear CVG834G
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36877
2013-06-06 22:22:20 +00:00
Florian Fainelli 42e69f45c7 brcm63xx: add kernel space and image support for the Netgear CVG834G
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36876
2013-06-06 22:22:14 +00:00
Florian Fainelli 966d47989b brcm63xx: add Broadcom cable modem firmware format header
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36875
2013-06-06 22:22:09 +00:00
Florian Fainelli 600b59642e brcm63xx: add support for BCM3368
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36874
2013-06-06 22:21:58 +00:00
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
Gabor Juhos 46225b99d9 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
Jonas Gorski 4d0fcd0c49 kernel: add some missing symbols/move them to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36670
2013-05-20 12:42:32 +00:00
Jonas Gorski 0a62b7c148 bcm63xx: add 3.9 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36660
2013-05-19 18:32:13 +00:00
Jonas Gorski 1f4e5f77a0 bcm63xx: Simplify CFE detection.
Check bootloader argument in mtd.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
                   one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36659
2013-05-19 18:32:02 +00:00
Jonas Gorski 526aedb705 kernel: move CONFIG_MIPS_SEAD3 to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
Jonas Gorski ed06d2ad5c bcm63xx: don't build CRAMFS
Don't build the CRAMFS file system module in the kernel, and save some bytes.

No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 36616
2013-05-12 21:41:52 +00:00
Jonas Gorski ccd7fbba87 led and buttons support for board DWV-S0
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36615
2013-05-12 21:41:50 +00:00
Jonas Gorski 0a907fdb8a bcm63xx: remove defconfig support
All boards use uci-defaults, no need to keep defconfig support.

SVN-Revision: 36610
2013-05-12 11:54:38 +00:00
Gabor Juhos e57c7d6c12 kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
Jonas Gorski 24636fcabf bcm63xx: split into two subtargets, generic and SMP
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36527
2013-05-02 15:28:31 +00:00
Jonas Gorski d11efa1428 bcm63xx: add SMP support for BCM6362 and BCM6368
BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36526
2013-05-02 15:28:26 +00:00
Jonas Gorski a80a4f3ec2 bcm63xx: fix hsspi flash registration for BCM6362
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36524
2013-05-02 15:28:10 +00:00
Jonas Gorski 999a956f4c bcm63xx: fix/enable livebox minipci
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 36523
2013-05-02 15:28:07 +00:00
Gabor Juhos 8a9fe26f20 kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
Florian Fainelli db02b0e4ee brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36506
2013-05-01 21:52:25 +00:00
Florian Fainelli 292368409e brcm63xx: add missing binary operands to BCM6345 ethernet patch
Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36505
2013-05-01 21:12:40 +00:00
Florian Fainelli 6f48ccea02 brcm63xx: remove 3.7 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36504
2013-05-01 21:12:26 +00:00
Gabor Juhos f718179af5 kernel: update linux 3.8 to 3.8.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
Gabor Juhos 36d4fd70bc kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
Jonas Gorski 90986b5581 bcm63xx: update patches with upstream submissions
SVN-Revision: 36407
2013-04-23 13:55:36 +00:00
Jonas Gorski 2a1a16d2d5 bcm63xx: switch to linux 3.8
SVN-Revision: 36406
2013-04-23 13:55:17 +00:00
Gabor Juhos 604395650a kernel: update linux 3.8 to 3.8.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
Florian Fainelli b412a81524 brcm63xx: fix LED names for various boards
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35880
2013-03-04 13:42:35 +00:00
Gabor Juhos 23b3b3a194 kernel: update linux 3.7 to 3.7.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
Jonas Gorski ff20c0e1fc bcm63xx: Fix sysupgrade for tag-version 7 and 8
Fix sysupgrade for tag-version 7 and 8.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35724
2013-02-21 11:45:41 +00:00
Florian Fainelli d7092aceb8 brcm63xx: migrate platform to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35661
2013-02-18 10:37:55 +00:00
Gabor Juhos 3f749d1e8e kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
Jonas Gorski 485e52e1d8 bcm63xx: make nvram checksum failures non fatal
fixes #12982.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35605
2013-02-15 12:23:49 +00:00
Gabor Juhos 162b8e23a5 kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
Gabor Juhos bae4bfe3f8 kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
Jonas Gorski 200359a520 bcm63xx: handle huawei nvram layout
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35533
2013-02-10 12:31:31 +00:00
Florian Fainelli 6b0da6db6a remove support for 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35506
2013-02-05 22:36:54 +00:00
Florian Fainelli e22926a46b make default version 3.7.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35505
2013-02-05 22:36:50 +00:00
Florian Fainelli 57803a98ec remove superfluous calls to /lib/brcm63xx.sh
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35504
2013-02-05 22:25:30 +00:00
Florian Fainelli 84d306d23c remove references to the old switch driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35503
2013-02-05 22:25:19 +00:00
Mirko Vogt ec19a23bae fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W
SVN-Revision: 35501
2013-02-05 14:57:43 +00:00
Mirko Vogt f460388ce2 add support for board named RTA770W
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
2013-02-05 14:57:40 +00:00
Jonas Gorski 8506964e6d bcm63xx: add support for linux 3.8
Based on 3.8-rc6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35482
2013-02-04 10:19:55 +00:00
Jonas Gorski 3b4fced67d bcm63xx: add support for linux 3.7
Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
2013-02-04 10:19:50 +00:00
Jonas Gorski a15e1a950d bcm63xx: refresh 3.6 patches
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35477
2013-02-04 10:19:24 +00:00
Jonas Gorski ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35407
2013-01-30 00:19:21 +00:00
Jonas Gorski 8411e5c06e bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
Jonas Gorski 17d51121a6 bcm63xx: expose the internal switch to b53
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Jonas Gorski 3e998d9cf9 bcm63xx: move bcm63xx-spi into the kernel
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Jonas Gorski e952eaa112 bcm63xx: Add Huawei HG556a support
Add Huawei EchoLife HG556a support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
Jonas Gorski 0e58173fa5 bcm63xx: Fix caldata partition mtd patch
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.

Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
Jonas Gorski 10fc07daac bcm63xx: remove 3.3 support
3.6 is tested enough to be considered stable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Gabor Juhos 44b9898251 kernel: update linux 3.6 to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos 2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos 2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Florian Fainelli d9d0814fc2 Fix Comtrend AR-5381u Power LED
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos 3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Florian Fainelli 0588d13a3e Fix typo in 96338GW power LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
Jonas Gorski 60e0e0d6e6 bcm63xx: Add a fixup for rt2x00 devices.
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
Jonas Gorski 746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup.
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
Jonas Gorski 1baeede939 bcm63xx: fix spi transfer handling
* Accept transfers without bits_per_word set.

* Work around the inability of the hardware of keeping CS asserted.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
Jonas Gorski 8dc72c5c4d Revert "target specific patches have nothing to do in generic.."
This reverts commit r34230, as it is causing build failures:

 make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1

Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.

SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
Imre Kaloz b220071cd2 target specific patches have nothing to do in generic..
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
Gabor Juhos ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
Jonas Gorski 306894b88f bcm63xx: switch to 3.6.6
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
Jonas Gorski c54fa281b1 bcm63xx: fix compilation with kmod-ohci enabled with 3.6
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
Jonas Gorski 15519bec9c bcm63xx: add two missing usb patches to 3.6
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
Jonas Gorski 06ad6ffe16 bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
Jonas Gorski f2bb7754f5 bcm63xx: Enable endian check support for ath9k pci fixup.
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
Jonas Gorski a50d121d8e linux: export bcm963xx_tag.h to userspace
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
Jonas Gorski 5bc7d81a20 bcm63xx: fix SPW303V images
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Florian Fainelli 9af90aa80c add missing 6345 clock bits patch to 3.6 patches
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
Florian Fainelli 8d69af7c9f add preliminary support for 3.6 kernel
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
Florian Fainelli dea2da55df fix Ethernet DMA for 636x and 6328 after r33916
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
Florian Fainelli 917670922b add support for the Dynalink RTA770BW board
This board id is used by the Siemens Gigaset SE515 router.

SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
Florian Fainelli bdfcbb8bee make BCM6345 Ethernet DMA changes runtime checks
The semantics of the DMA engine are identical, we just have a couple of
special case handling.

SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
Jonas Gorski 0cc4bed41c add support for Comtrend AR5381u.
Router: Comtrend AR5381u.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33895
2012-10-23 10:57:47 +00:00
Jonas Gorski d73871fb18 add support for Comtrend AR5387un.
Router: Comtrend AR5387un.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33894
2012-10-23 10:57:44 +00:00
Jonas Gorski e93725a743 add support for HomeStation ADB P.DG A4001N.
Router: HomeStation ADB P.DG A4001N.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33893
2012-10-23 10:57:39 +00:00
Florian Fainelli 61686a1514 add back support for BCM6345 Ethernet DMA engine
SVN-Revision: 33889
2012-10-22 12:57:22 +00:00
Florian Fainelli eeed82c04e fix clocks bits for BCM6345
SVN-Revision: 33888
2012-10-22 12:57:14 +00:00
Jonas Gorski e6171dfb2c Add F@ST2604 board support.
Add Sagem F@ST2604 board support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
Jonas Gorski fbe0af3237 bcm63xx: remove bcm_tag usage in kernel
Fixes #12292.

SVN-Revision: 33670
2012-10-09 08:08:49 +00:00
Jonas Gorski 6a000ba37a bcm63xx: fix 963281TAN image names
it's a 6328, not a 6348.

SVN-Revision: 33665
2012-10-08 13:08:40 +00:00
Jonas Gorski 997ace7e5e firmware-utils: move bcm_tag.h here
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.

SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
Jonas Gorski f16ea6be3f bcm63xx: fix entering failsafe through button
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.

SVN-Revision: 33653
2012-10-08 09:59:44 +00:00
Florian Fainelli caf900f0e4 remove kmod-spi-bitbang
This is no longer a dependency of kmod-spi-bcm63xx

SVN-Revision: 33562
2012-09-26 20:11:37 +00:00
Jonas Gorski 7708138183 bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
Fixes booting the device with button hotplug enabled (#10785).

SVN-Revision: 33340
2012-09-09 11:54:56 +00:00
Florian Fainelli f164b71189 leds: do not register device if no leds defined
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
Florian Fainelli f0f10014a0 BCM6358 fix enet MII clk definitions
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
Florian Fainelli 9b91c62917 nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>

SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
Jonas Gorski 4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
Jonas Gorski 07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards)
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
Jonas Gorski 820c224029 bcm63xx: add basic bcm6362 support
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
Jonas Gorski dcd339ac9d bcm63xx: enable usb for bcm6328
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
Jonas Gorski 94d257a851 bcm63xx: update enetswitch driver
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
Jonas Gorski fa75bd977a bcm63xx: reorder patches
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
Florian Fainelli a4d699ccf0 fix DVA-G3810BN image generation
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
Florian Fainelli c6813d33f3 add D-link DVA-G3810BN-TL-1 support
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
Florian Fainelli 18206793b2 Add CT6376-1 board support
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
Florian Fainelli 4acdbb1d87 Add brcmsmac profile
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
Florian Fainelli b94d9eb302 remove bcm63xx_pci_register() call in livebox board
SVN-Revision: 32661
2012-07-11 09:15:26 +00:00
Florian Fainelli f8446c3d4c use physmap-flash on livebox (#8677)
SVN-Revision: 32660
2012-07-11 09:15:22 +00:00
Florian Fainelli bb1488e5e7 Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32643
2012-07-06 22:10:37 +00:00
Jonas Gorski 0a3e9c3148 bcm63xx: bcm63xx-spi does not depend on spi-bitbang
SVN-Revision: 32594
2012-07-03 21:42:17 +00:00
Jonas Gorski fad888a85c bcm63xx: 96348A-122 improvements (Comtrend 5365)
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32593
2012-07-03 21:42:15 +00:00
Jonas Gorski 0c7e676342 bcm63xx: fix second caldata address calculation
thanks Noltari for spotting this.

SVN-Revision: 32592
2012-07-03 21:42:12 +00:00
Jonas Gorski 988147111c bcm63xx: update patches to latest upstream versions
SVN-Revision: 32591
2012-07-03 21:42:07 +00:00
Florian Fainelli 4cdc4b1f36 refresh patches
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00
Florian Fainelli 52bae2d2bd fix watchdog and rng drivers section mismatch (#11767)
SVN-Revision: 32522
2012-06-29 09:07:54 +00:00
Florian Fainelli 1d7878a38b fix SPI clock frequency selection
SVN-Revision: 32512
2012-06-27 22:14:50 +00:00
Florian Fainelli b89c81929e fix SPI message control handling for BCM6338/6348
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

SVN-Revision: 32409
2012-06-17 16:17:29 +00:00
Jonas Gorski f2271efc4e bcm63xx: readd accidentially dropped ignore_oc in ehci driver
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

SVN-Revision: 32221
2012-06-11 22:24:58 +00:00
Florian Fainelli 6e5242952c fix 553-board_96348w3.patch patch wrt gpio-keys-polled
SVN-Revision: 32096
2012-06-06 20:58:45 +00:00
Florian Fainelli 4c25e42fa8 fix alarm led color for board 96348A-122
SVN-Revision: 32089
2012-06-06 16:07:46 +00:00
Florian Fainelli 2f63f097de add 96348w3 board (#10764)
SVN-Revision: 32088
2012-06-06 15:45:04 +00:00
Florian Fainelli 9d38989d1f update livebox board support (#8677)
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

SVN-Revision: 32087
2012-06-06 15:44:56 +00:00
Florian Fainelli c69a2cdfbb fix leds naming for all bcm63xx boards
SVN-Revision: 32086
2012-06-06 15:44:52 +00:00
Florian Fainelli 23fc737b9d backport upstream spi-bcm63xx fixes
* message pump conversion
* not using stopping state
* setting spi driver mode bits

SVN-Revision: 32078
2012-06-06 13:31:33 +00:00
Florian Fainelli 4112094dbb increase led number in patch 301-led_count.patch
So that board patches are only touching board-related code

SVN-Revision: 32076
2012-06-06 13:31:24 +00:00
Florian Fainelli 9a61b249c5 fix board patches so that new boards are withing appropriate ifdef
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

SVN-Revision: 32060
2012-06-05 13:40:41 +00:00
Florian Fainelli 36c99bcc42 fix bisectability of patch 303-spi-board-info.patch
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

SVN-Revision: 32058
2012-06-05 13:40:35 +00:00
John Crispin a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Jonas Gorski ffea8eb913 bcm63xx: fix ethernet on 96328avng and 963281TAN
The internal switch did not get registered.

SVN-Revision: 32041
2012-06-04 08:35:25 +00:00
Jonas Gorski 3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00