Commit Graph

556 Commits (4cd67a4f212c5a5eeeadefaf894a790853d95754)

Author SHA1 Message Date
Felix Fietkau 4bab4dee84 ath10k: merge some more pending upstream fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 14:12:44 +02:00
Adrian Panella c354591d1b mac80211: ath10k fix otp check patch
Fix patch to match new updated package version

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Felix Fietkau df7af9317b ath10k: merge some pending stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Scott Shambarger 4b8f0a2d26 mac80211: fix calculation of VHT capability values
- Fix calculation of `$vht_cap` bit field
 - Replace wrong reference to `$tx_stbc` variable with proper `$tx_stbc_2by1` one
 - Emit proper `RX-STBC-{1,12,123,1234}` tokens for the VHT capability list

See https://dev.openwrt.org/ticket/22535 for reference.

Signed-off-by: Scott Shambarger <devel@shambarger.net>
2016-06-10 18:08:30 +02:00
Felix Fietkau 7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Daniel Golle 3ec4803932 mac80211: respect user-set regulatory domain by default
It turns out most device vendors don't set the correct country code
in their devices' on-flash-EEPROM sections as they apparently rather
provide a complete per-target-market firmware with patched drivers
instead of just setting the country code.
This results in the driver to incorrectly assume the value stored in
the on-flash-EERPOM (usually US or China) being the regulatory domain
inside which the device is being used.
To work around this issue, OpenWrt introduced the ATH_USER_REGD config
variable to decide during build whether or not to allow the user to
override the regulatory domain setting. This option, however, is not
enabled by default and thus ends up being disabled for snapshots builds
and released binaries.
As we know for a long time that most devices got borked regulatory
domain values set in their EEPROMs we should allow our users to respect
their local law (instead of just assume US or China laws).
Note that also the current default has great potential of users not
ever setting their regulatory domain and thus using inapproriate and
potentially illegal frequencies and/or tx-power settings

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-05 13:37:55 +02:00
Felix Fietkau b08dbd3acf mac80211: disable iwlwifi build for linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-01 01:14:31 +02:00
Ash Benz 867c0cb237 kernel/mac80211: skip ath10k OTP check if caldata found
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Rafał Miłecki cdff540623 mac80211: brcmfmac: return -ENFILE if interface exists
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-30 08:25:44 +02:00
Rafał Miłecki efcaa046b7 mac80211: change default SSID from Lede to LEDE
LEDE project seems to be using "LEDE" as its acronym everywhere. To keep
things consistent adjust default wireless SSID.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-29 16:22:47 +02:00
Felix Fietkau 48ff6eff8c mac80211: add missing config symbols to PKG_CONFIG_DEPENDS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 00:11:55 +02:00
Felix Fietkau 24270e9493 mac80211: fix unaligned accesses in the tx path
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 17:55:54 +02:00
Helmut Schaa 21b04c623e ath9k: Fix TX99 support
The patch 300-ath9k-force-rx_clear-when-disabling-rx.patch broke TX99 support
in ath9k. Fix the patch by only applying rx_clear if TX99 mode is not used.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2016-05-18 15:00:02 +02:00
Helmut Schaa 262cec2fb8 mac80211: Allow selection of TX99 support in ath9k
Add a new config option to enable TX99 support in ath9k.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2016-05-18 14:59:41 +02:00
Felix Fietkau 34b05087f7 mac80211: fix a module build/dependency issue that was breaking lib80211
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-16 10:52:24 +02:00
Felix Fietkau df93d53a4b mac80211: update to wireless-testing 2016-05-12
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
John Crispin fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
John Crispin 1a1bb3aaff mac80211: ath9k: add GPIO support for AR9280 chip
Enable access to GPIO on Atheros wireless chip AR9280.
Support for 9280 is added to existing 9285/9287 subsystem
because these 3 chips differ only in number of GPIO pins.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 49251
2016-04-26 11:44:07 +00:00
Rafał Miłecki f4edfc69a3 mac80211: add brcmfmac regression ("NULL pointer dereference") fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49222
2016-04-25 15:32:20 +00:00
Rafał Miłecki 894aed060e mac80211: update brcmfmac including missing boardrev workaround
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49174
2016-04-16 08:48:43 +00:00
John Crispin 63a9c61fb6 mac80211: build airo on x86 only
airo requires ISA_DMA_API and
that symbol is only set on some ppc,malta,x86
x86 is probably only platform where that driver is used

fixes buildbot errors on ar71xx,lantiq ...:
airo.ko is missing

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49073
2016-03-23 12:52:24 +00:00
John Crispin b5bd41edcd mac80211: add cisco airo
airo depends on cfg80211, move it to mac80211

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49047
2016-03-20 14:41:41 +00:00
Hauke Mehrtens 6d933987db mac80211: libertas-spi: deactivate for UML target
The UML target does not have spi support.
This fixes a build problem found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49034
2016-03-17 23:09:20 +00:00
John Crispin 553c1b793f brcmfmac: Add Raspberry Pi 3 support
- Enable SDIO support on brcmfmac.
- Disable power managment for brcm2708 target.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49023
2016-03-16 09:26:42 +00:00
Rafał Miłecki f5317ed5d2 mac80211: backport brcmfmac patchset with driver setting concept
This prepares brcmfmac for better country handling and fixes BCM4360
support which was always failing with:
[   13.249195] brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48959
2016-03-07 22:37:09 +00:00
Felix Fietkau 2cfd943fe9 mac80211: rework gpio chip/button support to build on platforms without CONFIG_GPIOLIB
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48938
2016-03-07 09:20:22 +00:00
Felix Fietkau 6bece706ec mac80211: ath9k: enable GPIO buttons
Enable platform-defined GPIO button support for ath9k device.
Key poller is activated for attached platform buttons.
Requires ath9k GPIO chip access.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48921
2016-03-05 09:45:03 +00:00
Felix Fietkau 4f8f5a2332 mac80211: improve rate control performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48897
2016-03-03 22:29:00 +00:00
Felix Fietkau 806b68fc77 mac80211: add a number of pending fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48883
2016-03-02 14:56:48 +00:00
Felix Fietkau cafc41ab01 mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48882
2016-03-02 14:56:43 +00:00
Felix Fietkau 5158e74cbb mac80211: ath9k: enable access to GPIO
Enable access to GPIO chip and its pins for Atheros AR92xx
wireless devices. For now AR9285 and AR9287 are supported.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48881
2016-03-02 13:22:51 +00:00
Felix Fietkau 9e74c3af07 mac80211: ath9k: set default state for platform LEDs
Support default state for platform LEDs connected to ath9k device.
Now LEDs are correctly set on or off at ath9k module initialization.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48880
2016-03-02 13:22:46 +00:00
Felix Fietkau a8c15c0204 mac80211: ath9k: enable platform WLAN LED name
Enable platform-supplied WLAN LED name for ath9k device.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48879
2016-03-02 13:22:40 +00:00
Rafał Miłecki 53814290e7 mac80211: backport brcmfmac fix for primary channel in 80 MHz mode
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48782
2016-02-25 20:24:47 +00:00
Rafał Miłecki b24accd72d mac80211: backport brcmfmac fix for sdio sg table alloc crash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48781
2016-02-25 20:24:38 +00:00
Felix Fietkau 3064f16863 mac80211: fix an RTS/CTS issue in minstrel_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48759
2016-02-25 09:24:13 +00:00
Felix Fietkau 2f7dcdec58 mac80211: sync a-msdu tx patch with the latest upstream submission
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48758
2016-02-25 09:24:09 +00:00
Felix Fietkau cd33dd3f7c mac80211: add packages libertas-spi module and firmware
This adds option to build kernel module and firmware packages
for a Marvell 8686 SPI Wireless device

Signed-off-by: Joseph Honold <mozzwald@gmail.com>

SVN-Revision: 48750
2016-02-22 08:54:08 +00:00
Felix Fietkau b9e910d658 mac80211: set default aggregation timeout to 0 to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48744
2016-02-18 18:55:46 +00:00
Felix Fietkau 42fc062d47 mac80211: update A-MSDU tx support to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48743
2016-02-18 18:55:35 +00:00
Felix Fietkau 6cfc7db8a2 mac80211: fix a crash in monitor mode injection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48719
2016-02-14 12:26:49 +00:00
Felix Fietkau 533147beb2 mac80211: improve a-msdu rx performance by avoiding unnecessary data copying
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48673
2016-02-08 13:38:11 +00:00
Felix Fietkau 446d06edac mac80211: fix a memory leak in a-msdu rx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48672
2016-02-08 13:38:03 +00:00
Felix Fietkau 21e716dbec mac80211: update A-MSDU tx patch to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48671
2016-02-08 13:37:55 +00:00
Felix Fietkau f3761eaacc mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48670
2016-02-08 13:37:47 +00:00
Rafał Miłecki 6ef21fb874 mac80211: fix flowrings infinite loops in brcmfmac on BCM4366
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48653
2016-02-07 23:12:38 +00:00
Felix Fietkau 04573657d0 mac80211: merge a fix for minstrel expected throughput reporting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48648
2016-02-07 14:30:01 +00:00
Felix Fietkau 1933dc0aa3 mac80211: merge a few mesh fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48647
2016-02-07 14:29:51 +00:00
Felix Fietkau 522bba5e42 ath9k: merge fix for noise floor calibration
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48641
2016-02-07 13:29:08 +00:00
Rafał Miłecki d99cdd4fef mac80211: add first brcmfmac patches for 14e4:4365 BCM4366 support
It's not really supported yet as it still fails with:
brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48640
2016-02-06 17:10:10 +00:00