mac80211: add a number of pending fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48883
lede-17.01
Felix Fietkau 2016-03-02 14:56:48 +00:00
parent cafc41ab01
commit 806b68fc77
5 changed files with 180 additions and 0 deletions

View File

@ -0,0 +1,35 @@
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Tue, 1 Mar 2016 00:29:00 +0200
Subject: [PATCH] mac80211: Fix Public Action frame RX in AP mode
Public Action frames use special rules for how the BSSID field (Address
3) is set. A wildcard BSSID is used in cases where the transmitter and
recipient are not members of the same BSS. As such, we need to accept
Public Action frames with wildcard BSSID.
Commit db8e17324553 ("mac80211: ignore frames between TDLS peers when
operating as AP") added a rule that drops Action frames to TDLS-peers
based on an Action frame having different DA (Address 1) and BSSID
(Address 3) values. This is not correct since it misses the possibility
of BSSID being a wildcard BSSID in which case the Address 1 would not
necessarily match.
Fix this by allowing mac80211 to accept wildcard BSSID in an Action
frame when in AP mode.
Fixes: db8e17324553 ("mac80211: ignore frames between TDLS peers when operating as AP")
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3374,6 +3374,7 @@ static bool ieee80211_accept_frame(struc
return false;
/* ignore action frames to TDLS-peers */
if (ieee80211_is_action(hdr->frame_control) &&
+ !is_broadcast_ether_addr(bssid) &&
!ether_addr_equal(bssid, hdr->addr1))
return false;
}

View File

@ -0,0 +1,21 @@
From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Fri, 19 Feb 2016 11:43:04 +0100
Subject: [PATCH] cfg80211: add radiotap VHT info to rtap_namespace_sizes
Add IEEE80211_RADIOTAP_VHT entry to rtap_namespace_sizes array in order to
define alignment and size of VHT info in tx radiotap
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
--- a/net/wireless/radiotap.c
+++ b/net/wireless/radiotap.c
@@ -43,6 +43,7 @@ static const struct radiotap_align_size
[IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, },
[IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, },
[IEEE80211_RADIOTAP_AMPDU_STATUS] = { .align = 4, .size = 8, },
+ [IEEE80211_RADIOTAP_VHT] = { .align = 2, .size = 12, },
/*
* add more here as they are defined in radiotap.h
*/

View File

@ -0,0 +1,36 @@
From: Sven Eckelmann <sven@narfation.org>
Date: Wed, 24 Feb 2016 16:25:49 +0100
Subject: [PATCH] mac80211: fix parsing of 40Mhz in injected radiotap
header
The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2
bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if
the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be
confused with IEEE80211_RADIOTAP_MCS_BW_20U.
Fixes: 5ec3aed9ba4c ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1689,7 +1689,7 @@ static bool ieee80211_parse_tx_radiotap(
bool rate_found = false;
u8 rate_retries = 0;
u16 rate_flags = 0;
- u8 mcs_known, mcs_flags;
+ u8 mcs_known, mcs_flags, mcs_bw;
int i;
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
@@ -1765,8 +1765,9 @@ static bool ieee80211_parse_tx_radiotap(
mcs_flags & IEEE80211_RADIOTAP_MCS_SGI)
rate_flags |= IEEE80211_TX_RC_SHORT_GI;
+ mcs_bw = mcs_flags & IEEE80211_RADIOTAP_MCS_BW_MASK;
if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW &&
- mcs_flags & IEEE80211_RADIOTAP_MCS_BW_40)
+ mcs_bw == IEEE80211_RADIOTAP_MCS_BW_40)
rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
break;

View File

@ -0,0 +1,65 @@
From: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Date: Tue, 23 Feb 2016 15:43:35 +0100
Subject: [PATCH] mac80211: parse VHT info in injected frames
Add VHT radiotap parsing support to ieee80211_parse_tx_radiotap().
That capability has been tested using a d-link dir-860l rev b1 running
OpenWrt trunk and mt76 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1690,6 +1690,8 @@ static bool ieee80211_parse_tx_radiotap(
u8 rate_retries = 0;
u16 rate_flags = 0;
u8 mcs_known, mcs_flags, mcs_bw;
+ u16 vht_known;
+ u8 vht_mcs = 0, vht_nss = 0;
int i;
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
@@ -1771,6 +1773,32 @@ static bool ieee80211_parse_tx_radiotap(
rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
break;
+ case IEEE80211_RADIOTAP_VHT:
+ vht_known = get_unaligned_le16(iterator.this_arg);
+ rate_found = true;
+
+ rate_flags = IEEE80211_TX_RC_VHT_MCS;
+ if ((vht_known & IEEE80211_RADIOTAP_VHT_KNOWN_GI) &&
+ (iterator.this_arg[2] &
+ IEEE80211_RADIOTAP_VHT_FLAG_SGI))
+ rate_flags |= IEEE80211_TX_RC_SHORT_GI;
+ if (vht_known &
+ IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH) {
+ if (iterator.this_arg[3] == 1)
+ rate_flags |=
+ IEEE80211_TX_RC_40_MHZ_WIDTH;
+ else if (iterator.this_arg[3] == 4)
+ rate_flags |=
+ IEEE80211_TX_RC_80_MHZ_WIDTH;
+ else if (iterator.this_arg[3] == 11)
+ rate_flags |=
+ IEEE80211_TX_RC_160_MHZ_WIDTH;
+ }
+
+ vht_mcs = iterator.this_arg[4] >> 4;
+ vht_nss = iterator.this_arg[4] & 0xF;
+ break;
+
/*
* Please update the file
* Documentation/networking/mac80211-injection.txt
@@ -1796,6 +1824,9 @@ static bool ieee80211_parse_tx_radiotap(
if (rate_flags & IEEE80211_TX_RC_MCS) {
info->control.rates[0].idx = rate;
+ } else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) {
+ ieee80211_rate_set_vht(info->control.rates, vht_mcs,
+ vht_nss);
} else {
for (i = 0; i < sband->n_bitrates; i++) {
if (rate * 5 != sband->bitrates[i].bitrate)

View File

@ -0,0 +1,23 @@
From: Felix Fietkau <nbd@openwrt.org>
Date: Wed, 2 Mar 2016 15:51:40 +0100
Subject: [PATCH] mac80211: do not pass injected frames without a valid rate to
the driver
Fall back to rate control if the requested bitrate was not found.
Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames")
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1837,6 +1837,9 @@ static bool ieee80211_parse_tx_radiotap(
}
}
+ if (info->control.rates[0].idx < 0)
+ info->control.flags &= ~IEEE80211_TX_CTRL_RATE_INJECT;
+
info->control.rates[0].flags = rate_flags;
info->control.rates[0].count = min_t(u8, rate_retries + 1,
local->hw.max_rate_tries);