Commit Graph

274 Commits (4c8227539e608a0c118f0985b56f39a7ce979a76)

Author SHA1 Message Date
Jonas Gorski 901a7fa067 kernel: update 3.18 to 3.18.17
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46150
2015-06-30 23:26:09 +00:00
Rafał Miłecki cc758e7de0 bcm53xx: port last 2 UART patches to 4.1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46141
2015-06-29 06:59:45 +00:00
Rafał Miłecki d3544a20a8 bcm53xx: rework patch enabling UART support
Follow upstream patch and handle it using &uart0. Also disable &uart1 as
it's most likely unused. This will allow us to get valuable reports and
upstream these changes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46140
2015-06-29 06:48:41 +00:00
Rafał Miłecki 099f3cb7ec bcm53xx: use UART serial DT patch sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46139
2015-06-29 06:48:08 +00:00
Hauke Mehrtens 52e042ea55 bcm53xx: add upstream nand driver
This adds the upstream Broadcom nand driver and makes use of it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46131
2015-06-25 22:00:36 +00:00
Hauke Mehrtens 164e82099d bcm53xx: add upstream PCIe driver
This patch adds the missing parts to use the upstream Broadcom PCIe
driver and makes use of it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46130
2015-06-25 21:56:34 +00:00
Hauke Mehrtens ca49bcadae bcm53xx: add arm l2c overwrite options like in mainline kernel
Instead of setting the l2c_aux_val variable in the board code make it
possible to set these through device tree and make use of that.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46129
2015-06-25 21:43:16 +00:00
Hauke Mehrtens 37fb5ab893 bcm53xx: add support for kernel 4.1
This only removes the patches already applied upstream and makes the
rest apply cleanly.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46128
2015-06-25 21:33:53 +00:00
Rafał Miłecki b0cdcf4e93 bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46088
2015-06-21 16:47:05 +00:00
Rafał Miłecki 90d425039b bcm53xx: enable USB power on Buffalo WZR-1750DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46087
2015-06-21 16:26:23 +00:00
Rafał Miłecki 0049d0ca75 bcm53xx: update SPROM driver to include just-sent patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46086
2015-06-21 14:26:03 +00:00
Rafał Miłecki 167a2dc12e bcm53xx: enable USB power on Netgear R6250
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46083
2015-06-21 11:09:49 +00:00
Rafał Miłecki 64d3e52ad0 bcm53xx: update xHCI patch
This drops some debugging pr_info and adds platform_device_unregister.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46082
2015-06-21 11:09:30 +00:00
Rafał Miłecki 63bc66cfcd bcm53xx: fix enabling GPIO-controlled USB power
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46081
2015-06-21 10:18:52 +00:00
Rafał Miłecki b3afbe4918 bcm53xx: add xHCI support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46080
2015-06-21 10:18:43 +00:00
Jonas Gorski 9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
Rafał Miłecki 351a2ec15f bcm53xx: use USB patches sent upstream by Hauke
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.

A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45997
2015-06-16 08:28:46 +00:00
Rafał Miłecki 950c0191c2 bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45943
2015-06-10 20:34:32 +00:00
Rafał Miłecki e011a5c375 bcm53xx: backport the latest 4.2 ARM BCM5302X patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45922
2015-06-07 14:41:05 +00:00
Rafał Miłecki 2364dd9331 bcm53xx: refresh kernel config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45916
2015-06-06 22:34:37 +00:00
Rafał Miłecki 46a25c6e8a bcm53xx: fallback to default_do_upgrade if NAND upgrade fails
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45915
2015-06-06 17:52:53 +00:00
Rafał Miłecki 3d4f163df1 bcm53xx: sysupgrade: drop useless shift in platform.sh
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45914
2015-06-06 17:26:05 +00:00
Rafał Miłecki 54fb91f0cf bcm53xx: extract TRX from image on the fly
Extracting TRX to separated file in /tmp/ just wastes some RAM while we
can just pass a proper extracting command to the default_do_upgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45912
2015-06-06 17:23:03 +00:00
Rafał Miłecki 5e90144aec bcm53xx: sysupgrade: extract TRX partitions directly from vendor image
Extracting full TRX out of vendor format is not needed as otrx supports
passing TRX offset. This saves some RAM during sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45911
2015-06-06 17:05:31 +00:00
Rafał Miłecki 48da51ed03 bcm53xx: update NVRAM driver to support getting contents
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45907
2015-06-05 21:49:57 +00:00
Rafał Miłecki 9845d729a9 bcm53xx: build images for Asus devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45790
2015-05-27 16:20:06 +00:00
Hauke Mehrtens 47eca7a1ca bcm53xx: add OHCI (USB 1.1) support
There is also a OHCI controller, activate it for USB 1.1 support.

This should close #19601.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Rafał Miłecki 63bb7c51db bcm53xx: add Asus RT-AC87U partitioning hacky workaround
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
Rafał Miłecki 75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
Rafał Miłecki ab83610563 bcm53xx: use backported Asus RT-AC87U DT patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
Rafał Miłecki abed46aacc bcm53xx: enable RT-AC87U UART console
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
Rafał Miłecki 3dd9274332 bcm53xx: add support for SmartRG SR400ac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
Rafał Miłecki b4ecf19faa bcm53xx: replace DT patches with backports from stblinux
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
Rafał Miłecki af019cad56 bcm53xx: use of_machine_is_compatible helper in b53 fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
Rafał Miłecki afb98aea4d bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
Rafał Miłecki 610ee0d85a bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
Rafał Miłecki 2d3aaa2d2f bcm53xx: fix default network interface on Netgear R8000
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
Rafał Miłecki 45ec92fa30 bcm53xx: bgmac: add support for the 3rd core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
Rafał Miłecki d2e5e2bf54 bcm53xx: sync NVRAM and SPROM drivers with upstream version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45678
2015-05-13 08:30:45 +00:00
Rafał Miłecki 3a6cdac37c kernel: backport first bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
Rafał Miłecki 33e597b241 bcm53xx: sort ports from NVRAM entries before matching them
Some devices have unsorted ports which may lead to broken config.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
Rafał Miłecki 866fe3895d bcm53xx: sysupgrade: check if new kernel fits partition size
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
Rafał Miłecki 457d9caf4d bcm53xx: sysupgrade: improve NAND warnings
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
Rafał Miłecki 5b9d70c888 bcm53xx: image: prepare for generating serial flash images
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45545
2015-04-21 08:42:41 +00:00
Rafał Miłecki a86e7330dc bcm53xx: sysupgrade: drop some debugging message
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
Rafał Miłecki 688c1d74b9 bcm53xx: sysupgrade: allow flashing NAND devices without --force
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
Rafał Miłecki d263c8e1a9 bcm53xx: sysupgrade: support flashing TRX with UBI image
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
Rafał Miłecki 92875dbd3d bcm53xx: append only 1 block (with erasing mark) to UBI
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.

Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45541
2015-04-21 08:20:00 +00:00
Rafał Miłecki ac6879caaa bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45540
2015-04-21 08:19:53 +00:00