2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
e4720dfa95
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
1d286fd755
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
b0449ccf04
ramips: W306R V2.0 - GPIO and Network fixes
...
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
90e99b9fe8
ramips: Make serial console for DIR-300-B1 work again
...
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
8e06682fb7
ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
8fd383ae2e
kernel: update linux 3.3 to 3.3.3
...
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
1ab80c7817
ramips: rt305x: add support for the UR-336UN board
...
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>
SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
3626444c6d
ramips: rt305x: add support for the Asus WL-330N3G board
...
This patch adds support for the ASUS WL-330N3G
Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.
The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.
r = led is red
b = led is blue
0 = led is off
xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness
initial state action led gpio state
r0 b0 r0->r1 r r0 b0
r0 b0 b0->b1 b r0 b1
r1 b0 r1->r0 0 r0 b0
r1 b0 b0->b1 r r1 *b1*
r1 b1 r1->r0 b r0 b1
r1 b1 b1->b0 r r1 b0
r0 b1 r0->r1 r r1 *b1*
r0 b1 b1->b0 0 r0 r0
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
5024ffb976
ramips: nuke 3.2 suport
...
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
6c8ca78067
ramips: switch to 3.3.2
...
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
5c325b0057
ramips: add support for 3.3
...
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
7f902c962b
ramips: rt305x: add OHCI/EHCI registration code for RT3352
...
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
1645928135
ramips: rt305x: fix CPU clock detection on RT3352
...
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
fb69e28eaf
ramips: rt305x: use different memory size setup for RT3352
...
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
818aeba960
ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
...
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
6b677e1d22
ramips: add swconfig to the default package list
...
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
ced031a0b2
ramips: build initramfs image for the Fonera 2.0N
...
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
fc88a363c0
ramips: rt305x: add initial support for Tenda W306R V2.0
...
More device info at: http://wiki.openwrt.org/toh/tenda/w306r
Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]
SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
88b5827c52
ramips: remove hardcoded console parameter from kernel configs
...
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
a8f2bc682e
kernel: also update the targets to use 3.2.15
...
Thanks Gabor for spotting it.
SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
16b4cbcdd6
kernel: update linux 3.2 to 3.2.14
...
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
d87efd8c3c
kernel: update linux 3.2 to 3.2.13 and refresh patches
...
Also remove a duplicate patch from lantiq (already in generic).
SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
e9c4d3d1f2
ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
...
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
d495277d9f
ramips: rt305x: build image for the DIR-615 rev D boards
...
Patch from #10105 .
SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
e4e24c5512
ramips: rt305x: add add support for the Asus WL-330N board
...
[juhosg: reorder several lines in order to keep things sorted
alphabetically]
Signed-off-by: Frédéric Leroy <fredo@starox.org>
SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
c1dc6df8bd
kernel: update linux 3.2 to 3.2.12
...
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
18f7081e17
ramips: rt305x: add profile for the AZtech HW-5503G board
...
Patch from #11085 .
SVN-Revision: 30907
2012-03-12 17:29:06 +00:00
0f77d0b2ba
ramips: add RT3350 detection
...
SVN-Revision: 30900
2012-03-12 16:12:13 +00:00
05d3f559f5
ramips: rt305x: rewrite SoC detection
...
SVN-Revision: 30890
2012-03-11 19:05:59 +00:00
8cf8ee8f9d
ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_*
...
SVN-Revision: 30889
2012-03-11 19:05:57 +00:00
acb4ad86e5
ramips: replace RALINK_SOC_* macros with global variables
...
SVN-Revision: 30888
2012-03-11 19:05:56 +00:00
8cff770eb3
ramips: introduce ramips_soc_prom_init and move SoC detection into that
...
SVN-Revision: 30887
2012-03-11 19:05:53 +00:00
6c51c47962
ramips: build initramfs image for DIR-{3,6}00 boards
...
SVN-Revision: 30882
2012-03-11 16:39:31 +00:00
4e15457e0e
ramips: allow to use DSP ASE on RT3xxx
...
SVN-Revision: 30879
2012-03-11 16:39:26 +00:00
0e486d2fd2
ramips: add support for unbranded XDX-RN502J board
...
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:
http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197
http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html
some reports also state the Aceex 22Y uses the same board.
more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878
[juhosg: fix checkpatch warnings, use the GENERIC_4M template]
Signed-off-by: bruno schwander <bruno@tinkerbox.org>
SVN-Revision: 30809
2012-03-04 16:09:13 +00:00
44c8b396f9
ramips: board support for Asus RT-N10+
...
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]
Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>
SVN-Revision: 30808
2012-03-04 16:09:11 +00:00
9698a499b6
kernel: update linux 3.2 to 3.2.9
...
SVN-Revision: 30767
2012-03-01 19:49:02 +00:00
72599f0c61
ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop
...
SVN-Revision: 30733
2012-02-26 10:54:13 +00:00
100f76a010
ramips: raeth: add rx_info structure
...
This helps to reduce code size on RX path:
add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function old new delta
ramips_eth_open 1104 1144 +40
ramips_ring_free 212 232 +20
ramips_eth_stop 400 408 +8
ramips_eth_rx_hw 648 592 -56
SVN-Revision: 30732
2012-02-26 10:54:12 +00:00
32e7b1c7d9
ramips: raeth: add tx_info structure
...
This helps to reduce code size on TX path:
add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function old new delta
ramips_eth_open 1048 1104 +56
ramips_eth_tx_housekeeping 156 148 -8
ramips_ring_free 224 212 -12
ramips_eth_stop 420 400 -20
ramips_eth_hard_start_xmit 480 428 -52
SVN-Revision: 30731
2012-02-26 10:54:10 +00:00
30143b715c
ramips: raeth: don't process disabled interrupts
...
Also rename the 'fe_int' variable.
SVN-Revision: 30713
2012-02-25 11:59:19 +00:00
6990f66861
ramips: fix FONERA20N image generation
...
SVN-Revision: 30710
2012-02-24 16:18:46 +00:00
9afeeae65e
ramips: image: increase minimum kernel partition size to 896k
...
SVN-Revision: 30706
2012-02-23 19:58:16 +00:00
7089b5213e
ramips: image: cleanup and sort templates/profiles
...
SVN-Revision: 30705
2012-02-23 19:58:15 +00:00
c8718a220b
ramips: image: use GENERIC_4M template for the ALL0256N board
...
SVN-Revision: 30704
2012-02-23 19:58:14 +00:00
507c7d30f5
ramips: image: introduce mkmtd/{,phys,spi} helpers
...
SVN-Revision: 30703
2012-02-23 19:58:12 +00:00
5f63ea18aa
ramips: image: pass mtdlayout variables by value
...
SVN-Revision: 30702
2012-02-23 19:58:11 +00:00
49e53c06b9
ramips: image: merge F5D8235V{1,2} templates
...
SVN-Revision: 30701
2012-02-23 19:58:10 +00:00
00e7277a4c
ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards
...
SVN-Revision: 30700
2012-02-23 19:58:07 +00:00
554010d55b
ramips: image: introduce mkcmdline helper
...
SVN-Revision: 30699
2012-02-23 19:58:06 +00:00
32c6d63acf
ramips: image: use the GENERIC_4M template for the V11ST-FE board
...
SVN-Revision: 30698
2012-02-23 19:58:04 +00:00
ab65053cf0
ramips: image: simplify Makefile a bit
...
SVN-Revision: 30697
2012-02-23 19:58:03 +00:00
9017fce3a2
ramips: image: add MkImageLzma wrapper
...
SVN-Revision: 30696
2012-02-23 19:58:02 +00:00
c9d8f471fc
ramips: image: allow to build board specific initramfs images
...
SVN-Revision: 30695
2012-02-23 19:58:01 +00:00
c0974b46a5
ramips: merge identical switch configuration entries
...
SVN-Revision: 30688
2012-02-22 19:46:19 +00:00
a9101a144c
ramips: use unified switch identifiers in uci-defaults/network
...
SVN-Revision: 30687
2012-02-22 19:46:17 +00:00
b6522f372f
ramips: fix VLAN config of the RT-N15
...
SVN-Revision: 30686
2012-02-22 19:46:15 +00:00
a18a821733
ramips: raeth: show interrupt statistics in debugfs
...
SVN-Revision: 30681
2012-02-22 13:06:44 +00:00
214216c04d
ramips: raeth: add debugfs support
...
SVN-Revision: 30680
2012-02-22 13:06:42 +00:00
c1e4d709fa
ramips: raeth: rename main source file
...
SVN-Revision: 30679
2012-02-22 13:06:41 +00:00
5e6bc97d0c
ramips: raeth: add missing Kconfig and Makefile
...
SVN-Revision: 30671
2012-02-21 09:44:30 +00:00
3ba0f4e1ca
ramips: move the ethernet driver into a separate directory
...
Also clean up the Kconfig symbols.
SVN-Revision: 30670
2012-02-21 09:26:43 +00:00
a6d904b1d6
ramips: rename the spi driver
...
SVN-Revision: 30669
2012-02-21 09:26:41 +00:00
dd001a4b0f
ramips: rt3883: make rt3883_nand_data visible
...
SVN-Revision: 30655
2012-02-19 19:40:37 +00:00
62f213eab9
ramips: merge 3.2 fixes
...
SVN-Revision: 30652
2012-02-19 17:52:23 +00:00
18fdaee00b
ramips: nuke 2.6.39 support
...
SVN-Revision: 30651
2012-02-19 17:52:20 +00:00
e2ea72515f
ramips: rt305x: nuke built-in MTD partition maps
...
SVN-Revision: 30650
2012-02-19 17:52:15 +00:00
de6405c898
ramips: rt288x: nuke built-in MTD partition maps
...
SVN-Revision: 30649
2012-02-19 17:52:11 +00:00
e7f59b9326
ramips: build sysupgrade image for the V11ST-FE board
...
SVN-Revision: 30648
2012-02-19 17:52:08 +00:00
3489515a7e
ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
...
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]
Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>
SVN-Revision: 30645
2012-02-19 16:44:49 +00:00
990ed96a2a
ralink: rt3883: disable the 2GHz band on the RT-N56U
...
SVN-Revision: 30632
2012-02-18 17:36:21 +00:00
5710530c41
ramips: rt3883: make rt3883_wlan_data visible
...
SVN-Revision: 30631
2012-02-18 17:36:16 +00:00
e17a3ffbbd
ramips: extract eeprom for the built-in wlan module on the RT-N56U
...
SVN-Revision: 30604
2012-02-16 20:06:22 +00:00
dabca24361
ramips: rt3883: change eeprom file name
...
SVN-Revision: 30603
2012-02-16 20:06:21 +00:00
00d963999d
ramips: select HW_HAS_PCI on per-board basis
...
SVN-Revision: 30576
2012-02-16 08:17:54 +00:00
fc967295ec
ramips: rt3883: remove a stray character from rt3883.h
...
SVN-Revision: 30575
2012-02-16 08:17:53 +00:00
b4af07d5c0
ramips: rt288x: don't register the PCI controller on each board
...
SVN-Revision: 30574
2012-02-16 08:17:52 +00:00
f8a56dc8df
ramips: raeth: separate ring allocation and setup
...
SVN-Revision: 30573
2012-02-16 08:17:50 +00:00
49fc54be3d
ramips: rt288x: fix PCI resource conflict
...
SVN-Revision: 30563
2012-02-15 21:19:02 +00:00
37f8c19028
correct PCI IO/Mem resource swapping
...
SVN-Revision: 30562
2012-02-15 21:13:21 +00:00
3ceebbba14
add Ralink V11ST-FE board support
...
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot
SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
8b8d9a8336
ramips: raeth: add a helper function for skb allocation
...
SVN-Revision: 30555
2012-02-15 18:33:42 +00:00
e57546de83
ramips: raeth: use netdev_alloc_skb
...
SVN-Revision: 30554
2012-02-15 18:33:41 +00:00
064855314b
ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
...
This helps GCC to generare more efficient code.
SVN-Revision: 30553
2012-02-15 18:33:40 +00:00
8c95385d78
ramips: raeth: use 're' instead of 'priv' everywhere
...
SVN-Revision: 30552
2012-02-15 18:33:38 +00:00
b3b79365f3
ramips: raeth: force link down in ramips_phy_stop
...
SVN-Revision: 30550
2012-02-15 13:47:52 +00:00
3e7b461431
ramips: raeth: serialize ramips_link_adjust calls
...
SVN-Revision: 30549
2012-02-15 13:47:50 +00:00
dcb13d4098
ramips: raeth: add PHYLIB support
...
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
02a01a16c7
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
43d1a2c3ab
ramips: rt3883: enable PCI on the RT-N56U board
...
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
784be92e39
ramips: rt3883: add PCI support
...
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
10f00dc48b
ramips: rt3883: sync 2.6.39 config
...
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
ed79921fe5
ramips: use SoC specific irq.h
...
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
8d5dfa75e6
ramips: rt3883: update package list in the default profile
...
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
99c019fb0d
ramips: add preliminary support for the Asus RT-N56U board
...
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
Jonas Gorski
Jo-Philipp Wich
Florian Fainelli