hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
19,617 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

7794 Commits (214c2e57fd3248e978a538a8c05d977cf90debe5)

Author SHA1 Message Date
John Crispin 23b2bd9494 linux-atm: update solos-pci driver to upstream 
Fixes for the solos-pci driver.

- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30541
 2012-02-14 20:11:24 +00:00
John Crispin 9e5b8ad833 linux-atm: headroom/padding fixes 
Submitted upstream to netdev by Chas Williams on linux-atm.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30540
 2012-02-14 20:11:22 +00:00
John Crispin 1a71f07d00 generate uboot environment data in target 
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
 2012-02-14 19:07:11 +00:00
John Crispin 7416a5f0aa fix compile error in previous commit 
SVN-Revision: 30534
 2012-02-14 19:07:05 +00:00
John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT. 
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
 2012-02-14 17:48:04 +00:00
Gabor Juhos 02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U 
SVN-Revision: 30529
 2012-02-14 17:32:45 +00:00
Gabor Juhos 43d1a2c3ab ramips: rt3883: enable PCI on the RT-N56U board 
SVN-Revision: 30528
 2012-02-14 17:32:44 +00:00
Gabor Juhos 784be92e39 ramips: rt3883: add PCI support 
SVN-Revision: 30527
 2012-02-14 17:32:42 +00:00
Gabor Juhos 10f00dc48b ramips: rt3883: sync 2.6.39 config 
SVN-Revision: 30526
 2012-02-14 17:32:41 +00:00
Gabor Juhos ed79921fe5 ramips: use SoC specific irq.h 
SVN-Revision: 30525
 2012-02-14 17:32:40 +00:00
John Crispin 0b07769898 fixes irq locking in ethernet driver 
SVN-Revision: 30522
 2012-02-14 15:05:58 +00:00
John Crispin 55bf39e98c fixes gpio_export patch 
SVN-Revision: 30521
 2012-02-14 15:05:57 +00:00
John Crispin 976d3eb854 add annex selection support to ltq_dsl package 
SVN-Revision: 30518
 2012-02-14 15:05:49 +00:00
Gabor Juhos 9a0e17857e ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards 
SVN-Revision: 30508
 2012-02-13 17:11:58 +00:00
Gabor Juhos 1c57a22aae ar71xx: add model detection for TL-WR842N/ND 
SVN-Revision: 30507
 2012-02-13 17:11:57 +00:00
Florian Fainelli e16916480d update to 3.2 
SVN-Revision: 30503
 2012-02-13 16:05:30 +00:00
Florian Fainelli 7bed2e2225 fix titan gpio register size 
SVN-Revision: 30502
 2012-02-13 16:05:27 +00:00
Gabor Juhos 8d5dfa75e6 ramips: rt3883: update package list in the default profile 
SVN-Revision: 30499
 2012-02-13 15:18:05 +00:00
Gabor Juhos 99c019fb0d ramips: add preliminary support for the Asus RT-N56U board 
SVN-Revision: 30498
 2012-02-13 15:18:04 +00:00
Gabor Juhos 97e641a0e6 ramips: raeth: enable MDIO code for RT3883 
SVN-Revision: 30497
 2012-02-13 15:18:03 +00:00
Gabor Juhos e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs 
SVN-Revision: 30495
 2012-02-13 15:17:59 +00:00
Florian Fainelli 4a0dc3a32a add support for 3.2 
SVN-Revision: 30492
 2012-02-13 12:36:34 +00:00
Hauke Mehrtens 30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed. 
SVN-Revision: 30488
 2012-02-12 22:41:20 +00:00
Hauke Mehrtens e7bd7f7e85 brcm47xx: activate config bug to show warnings 
SVN-Revision: 30487
 2012-02-12 22:40:01 +00:00
Gabor Juhos 22ec8b4839 ramips: use GENERIC_{4,8}M image template for WR5123GN 
SVN-Revision: 30483
 2012-02-12 18:04:47 +00:00
Gabor Juhos b7f129e19b ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline 
SVN-Revision: 30482
 2012-02-12 18:04:46 +00:00
Hauke Mehrtens fa21aef5ab brcm47xx: refresh patches 
SVN-Revision: 30481
 2012-02-12 16:45:27 +00:00
Hauke Mehrtens 838c363886 brcm47xx: update usb driver for brcm47xx. 
SVN-Revision: 30480
 2012-02-12 16:38:10 +00:00
Gabor Juhos a287c60a61 ramips: add initial support for 3.2 
SVN-Revision: 30476
 2012-02-12 12:52:14 +00:00
Gabor Juhos 388013b0ce ramips: include 'linux/module.h' in the ramips_spi driver 
SVN-Revision: 30475
 2012-02-12 12:52:13 +00:00
Gabor Juhos faae4235c4 ramips: rt288x: remove per-board physmap_flash_data instances 
SVN-Revision: 30474
 2012-02-12 12:52:12 +00:00
Gabor Juhos 3502e2b93f ramips: rt305x: remove per-board physmap_flash_data instances 
SVN-Revision: 30473
 2012-02-12 12:52:10 +00:00
Imre Kaloz 143e861708 enable another l2 cache errate on newer kernels 
SVN-Revision: 30472
 2012-02-12 11:22:08 +00:00
Gabor Juhos 3a11dcdaa8 ramips: load gpio-polled keys module 
SVN-Revision: 30463
 2012-02-11 20:37:34 +00:00
Gabor Juhos 323ece9474 ramips: remove yet another CONFIG_MTD_PARTITION ifdef 
SVN-Revision: 30462
 2012-02-11 19:37:11 +00:00
Gabor Juhos 32b9e8c750 ramips: use gpio-keys-polled instead of gpio-buttons 
SVN-Revision: 30461
 2012-02-11 19:37:06 +00:00
Imre Kaloz 8ce80f7454 add some missing symbols 
SVN-Revision: 30460
 2012-02-11 18:38:28 +00:00
Gabor Juhos 80b40497de ramips: add MIPS platform file 
SVN-Revision: 30459
 2012-02-11 18:16:11 +00:00
Gabor Juhos 80a535ba58 generic/2.6.39: refresh patches 
SVN-Revision: 30458
 2012-02-11 18:16:08 +00:00
Imre Kaloz 440a7fbc3b refresh patches to -rc3 
SVN-Revision: 30456
 2012-02-11 17:43:06 +00:00
Gabor Juhos 4e1b870f3e ramips: add MDIO bus support for RT288X 
SVN-Revision: 30455
 2012-02-11 16:49:56 +00:00
Imre Kaloz 0ace4636db rename 3.1 patches directory as it will be used for newer kernels as well 
SVN-Revision: 30454
 2012-02-11 15:59:23 +00:00
Imre Kaloz 1fb5ff4e04 rename 2.6.39 patches directory 
SVN-Revision: 30453
 2012-02-11 15:58:14 +00:00
Gabor Juhos 34a9ccf544 ramips: fix Belkin F5D8235-v2 VLAN setup 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30452
 2012-02-11 15:31:18 +00:00
Gabor Juhos 8916c02b47 ramips: raeth: make debugging messages configurable 
SVN-Revision: 30450
 2012-02-11 15:12:10 +00:00
Gabor Juhos aac3ad4c0e ramips: raeth: use device pointer in DMA API calls 
SVN-Revision: 30449
 2012-02-11 15:12:08 +00:00
Gabor Juhos 1fd8724e94 ramips: raeth: add netdev pointer to private structure 
SVN-Revision: 30448
 2012-02-11 15:12:06 +00:00
Gabor Juhos c6fa11d00f ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit 
SVN-Revision: 30447
 2012-02-11 15:12:05 +00:00
Gabor Juhos 2d055f130e ramips: raeth: unmap rx DMA address in ramips_cleanup_dma 
SVN-Revision: 30446
 2012-02-11 15:12:04 +00:00
Gabor Juhos 7bd7ddcf4e ramips: raeth: add rx_dma array to store the DMA address of the rx packets 
SVN-Revision: 30445
 2012-02-11 15:12:02 +00:00