1cb2596f19
ar8216: define all switch_addr structs as const
...
Define all switch_addr structs as const.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44002
2015-01-17 14:24:40 +00:00
88df2bd2ff
ramips: add support for Intenso Memory 2 Move USB 3.0
...
This adds support for a rt5350-based "portable nas" solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0<->sata
bridge VLI VL701.
The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0
socket (for charging the battery, or accessing the hdd directly).
Wireless connectivity is provided by the rt5350 SoC [i.e.:
802.11n 1x1 2.4 GHz with a pcb antenna.]
Serial, leds, wifi, ethernet and usb are tested and
as far as I can tell: they are working fine (tm).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44001
2015-01-17 14:06:13 +00:00
744298b8a0
base-files: Add ucidef_set_led_timer to uci-defaults.sh
...
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 44000
2015-01-17 13:58:14 +00:00
5010e2d2dd
modules: Add kmod-w1-slave-ds2413
...
This patch adds support for building the ds2413 one-wire kernel module.
Signed-off-by: Wouter Paesen <wouter@blue-gate.be>
SVN-Revision: 43999
2015-01-17 13:58:09 +00:00
09a08fb9e6
toolchain: Add libatomic when using external toolchain
...
Otherwise libatomic cannot be used in conjunction with external toolchains.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 43998
2015-01-17 13:58:03 +00:00
ff3448adaa
curl: allow enabling https protocol
...
Provide optional --enable-https flag for curl.
Signed-off-by: Lars Kruse <devel@sumpfralle.de>
SVN-Revision: 43997
2015-01-17 13:57:56 +00:00
6774c43dde
add iperf3, a new and smaller version of iperf
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43996
2015-01-17 13:14:02 +00:00
00db07be58
ramips: fix tx bql related race condition in the ethernet driver
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43995
2015-01-17 13:13:55 +00:00
748d452899
add pkgconfig information for popt library
...
Modify makefile to record pkgconfig information for the popt library.
Signed-off-by: Mike Brady <mikebrady@eircom.net>
SVN-Revision: 43994
2015-01-17 12:52:28 +00:00
18f76fbef1
iproute2: add package for bridge program
...
The 'bridge' program has been part of iproute2 for a while, and it was once
declared[1] to the the intended longterm replacement for bridge-utils, but
its features are still mostly distinct[2] from the venerable brctl.
[1] http://lwn.net/Articles/435845/
[2] http://sgros-students.blogspot.com/2013/11/comparison-of-brctl-and-bridge-commands.html
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43993
2015-01-17 10:58:34 +00:00
d644d1bd5e
iproute2: fix header problem for musl
...
iproute2 includes "sanitized" linux kernel headers, which work fine for uClibc, however
with musl there is some header conflict, principally some ipv6 structure redefinition. This
patch removes <linux/in6.h> from include/linux/if_bridge.h to solve the problem.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43992
2015-01-17 10:58:29 +00:00
148684bbf4
iproute2: bump version to 3.18.0
...
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43991
2015-01-17 10:58:22 +00:00
7a65864344
ralink: add support for Kingston MLWG2
...
This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2)
http://wiki.openwrt.org/toh/kingston/mlwg2
https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2
Tested-by: Gianpaolo Macario <gmacario@gmail.com>
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43990
2015-01-17 07:07:36 +00:00
03a708a0db
kernel: add references to openwrt alternative button handling
...
Add documentation that makes it easier to find the alternative,
recommended, and default handling for buttons in OpenWrt.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
SVN-Revision: 43989
2015-01-17 07:07:28 +00:00
8cbf97e936
Remove old P2812HNUFX dts
...
Remove unused P2812HNUFX board definition.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43988
2015-01-17 07:07:21 +00:00
7f77870c19
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
...
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
b4d2b69c43
lantiq: Add device tree for P2812HNUF1 and P2812HNUF3
...
Add device tree for P2812HNUF1 and P2812HNUF3.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43986
2015-01-17 07:07:06 +00:00
56a54515df
ramips: add i2c pingroup to the pinmux for rt-n14u
...
i2c pins are wired to wps a reset button
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 43985
2015-01-17 07:06:59 +00:00
27b82a7990
ramips: fix default led configuration for rt-n14u
...
use new helper function to generate default led configuration
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 43984
2015-01-17 07:06:51 +00:00
b5f9e5e454
ar71xx: fix board detection for TP-LINK TL-WA860RE
...
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43983
2015-01-17 07:06:45 +00:00
59cab6dd48
dnsmasq: support and use local-service by default ( #14951 )
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43982
2015-01-16 19:04:19 +00:00
71c8ec020d
bcm53xx: drop hacky patch making bcma init later
...
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43981
2015-01-16 15:59:29 +00:00
757b45a32f
config: enable EARLY_PRINTK on bcm53xx by default
...
It's useful for debugging and safe at the same time as we enable it per
device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43980
2015-01-16 14:50:51 +00:00
3bdf05441a
brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
...
SVN-Revision: 43979
2015-01-16 12:48:27 +00:00
8a103d5c56
mvebu: fixups for the new driver
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
8e20e09d1b
musl: update to version 1.1.6
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43977
2015-01-15 21:40:44 +00:00
3138207f48
openssl: update to 1.0.1l *sigh*
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43976
2015-01-15 17:59:06 +00:00
9a8bf84879
mvebu: add the new tlc59116 driver and migrate the Mamba to it
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43975
2015-01-15 13:59:01 +00:00
f1c5232f4d
ar71xx: fix disable_irq() on chained irq handlers
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43974
2015-01-15 12:19:20 +00:00
4f2fe5d7fa
kernel: fix disable_irq() on MIPS CPU IRQs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43973
2015-01-15 12:19:12 +00:00
4ae1e883e8
bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43972
2015-01-14 13:41:05 +00:00
a570ccd7e2
ath9k: fix irq storm issues ( #18483 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43971
2015-01-14 13:20:38 +00:00
4f06ba0727
malta: copy initramfs images
...
Malta ramdisk images are no longer copied to output due to a recent change.
This change reimplements copying of ramdisk images for Malta builds.
Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>
SVN-Revision: 43970
2015-01-14 12:09:33 +00:00
a72bf9f3d2
mvebu: Switch to the generic mkuimage macro
...
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.
Switch to this implementation.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43969
2015-01-14 11:39:20 +00:00
91b79128dc
mvebu: Replace the padjffs2 call by the generic definition
...
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43968
2015-01-14 11:37:29 +00:00
5b0849b97f
mdns: install uci package as config
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 43967
2015-01-14 09:59:26 +00:00
3a9e3dfa95
netfilter: handle NFT_MASQ_IPV6
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43966
2015-01-14 08:53:11 +00:00
f59c84c431
bcm53xx: enable earlyprintk on more devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43965
2015-01-14 07:42:48 +00:00
8e95c2c5be
bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43964
2015-01-14 07:03:42 +00:00
55e766d78d
bcm53xx: refresh configs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
252bb0eeae
map: export calculated ruleset to /tmp
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43961
2015-01-13 19:00:39 +00:00
2b366700b0
tools: libtool relocatable fixes
...
Make sure that libtool and libtoolize call grep relative to
$STAGING_DIR as well.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43960
2015-01-13 10:23:44 +00:00
90283e410b
tools: bootstrap libtool to pickup the correct in-tree automake
...
Also fix 000-relocatable.patch to avoid accidential sed invocations in bootstrap.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43959
2015-01-13 07:49:10 +00:00
73a1f3597b
tools: bootstrap automake to pickup the correct in-tree autoconf
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43958
2015-01-13 07:49:01 +00:00
6dec519be7
tools: add dummy scripts for help2man and makeinfo
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43957
2015-01-13 07:48:52 +00:00
1070fec51f
tools: change automake depends to libtool depends
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43956
2015-01-13 07:48:37 +00:00
eca61e8c44
tools: make libtool depend on automake, not vice versa
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43955
2015-01-13 07:48:24 +00:00
bc78885e70
ramips: add missing -Os cflag for mt7621
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43954
2015-01-13 00:34:49 +00:00
acfc6c153b
ramips: use a larger number of rx descriptors on mt7621 to work around rx overrun related packet loss
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43953
2015-01-13 00:34:45 +00:00
05d4b8c79b
ramips: remove interrupt coalescing, it is unnecessary with napi polling and could reduce throughput
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43952
2015-01-13 00:34:38 +00:00
John Crispin
Felix Fietkau
Steven Barth
Jo-Philipp Wich
Rafał Miłecki
Imre Kaloz
Luka Perkov