Commit Graph

6996 Commits (19eaf1c5f78afb7133e9208dd4d94938c19b3d08)

Author SHA1 Message Date
John Crispin 6b8c119b41 * fix external interrupts
SVN-Revision: 27687
2011-07-18 16:27:11 +00:00
John Crispin 5906377332 * add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 27665
2011-07-17 19:27:44 +00:00
Florian Fainelli 3994a2d1f9 add additionnal debug symbols when kernel debugging is enabled
SVN-Revision: 27637
2011-07-17 12:30:04 +00:00
Florian Fainelli 9c7294f7c7 add ehci support to DWV-S0 board (#9059)
SVN-Revision: 27622
2011-07-16 08:39:04 +00:00
Florian Fainelli 930485561c fix GEN_SPI_RSET_BASE macro (#9697)
SVN-Revision: 27604
2011-07-13 09:33:11 +00:00
Imre Kaloz ab5fd3c1cb upgrade to 3.0-rc7
SVN-Revision: 27600
2011-07-12 13:44:16 +00:00
Imre Kaloz 0321740a62 upgrade to 3.0-rc6 and optimize for armv5te again
SVN-Revision: 27592
2011-07-11 20:35:16 +00:00
Felix Fietkau f3d693c0ee ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
SVN-Revision: 27568
2011-07-09 06:30:13 +00:00
Felix Fietkau 2806c75c07 ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
SVN-Revision: 27567
2011-07-09 06:29:46 +00:00
Imre Kaloz 8788b97e65 use the new upstream l2cache and wdt code, smaller changes, refresh patches
SVN-Revision: 27558
2011-07-08 09:41:07 +00:00
Imre Kaloz b3b0f0e49a add mpcore_wdt fixes
SVN-Revision: 27557
2011-07-08 09:33:13 +00:00
John Crispin 7f548d379f fix generation of falcon images for profiles
SVN-Revision: 27550
2011-07-07 20:20:51 +00:00
John Crispin d7732885ed adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 27549
2011-07-07 20:20:46 +00:00
John Crispin b75a8fb532 fix up falcon kernel config
SVN-Revision: 27542
2011-07-07 18:20:56 +00:00
John Crispin 036df9f088 fix i2c-falcon kmod package selection
SVN-Revision: 27541
2011-07-07 18:20:51 +00:00
John Crispin a463daa818 replace all references to xway with danube
SVN-Revision: 27538
2011-07-07 18:20:37 +00:00
John Crispin dc2af33083 fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
2011-07-07 18:20:31 +00:00
John Crispin 3c1079a7a7 add ar9 specific profile
SVN-Revision: 27536
2011-07-07 18:20:27 +00:00
John Crispin 09d547eae4 rename xway profile to danube and remove ar9 specifics
SVN-Revision: 27535
2011-07-07 18:20:21 +00:00
John Crispin f177052c9d remove ar9 board from xway profiles
SVN-Revision: 27534
2011-07-07 18:20:16 +00:00
John Crispin dc69e5f2e3 remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
SVN-Revision: 27532
2011-07-07 18:20:07 +00:00
Imre Kaloz 79fa6c693a refresh patches
SVN-Revision: 27528
2011-07-07 17:18:50 +00:00
Imre Kaloz b8227050fb refresh patches
SVN-Revision: 27527
2011-07-07 17:18:06 +00:00
Imre Kaloz 92981b6bb3 enable smp support
SVN-Revision: 27526
2011-07-07 17:17:44 +00:00
Imre Kaloz 94055a90a7 make smp code more similar to upstream
SVN-Revision: 27525
2011-07-07 17:17:06 +00:00
Imre Kaloz 42df203852 3.0 is at rc6 now
SVN-Revision: 27524
2011-07-07 13:30:41 +00:00
Gabor Juhos 5ad4040c49 ar71xx: build image for the AP121 boards with 4M of flash
SVN-Revision: 27523
2011-07-07 13:01:50 +00:00
Gabor Juhos cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards
SVN-Revision: 27522
2011-07-07 13:01:48 +00:00
Imre Kaloz b15f8f765a add support for and switch to XZ compressed kernels on ARM
SVN-Revision: 27518
2011-07-07 10:26:16 +00:00
Imre Kaloz d148dcce05 select the right cpu
SVN-Revision: 27517
2011-07-07 10:24:37 +00:00
Florian Fainelli a3e343b722 fix building of perf for arm on uclibc
SVN-Revision: 27514
2011-07-07 09:43:00 +00:00
Florian Fainelli a4d69536ea enable support for perf events
SVN-Revision: 27512
2011-07-07 09:42:53 +00:00
Florian Fainelli 0cb42cf9a4 enable perf counter support
SVN-Revision: 27511
2011-07-07 09:42:50 +00:00
Daniel Dickinson 0d8b0e937d base-files: diag.sh: added failsafe led definition
SVN-Revision: 27502
2011-07-07 03:09:20 +00:00
John Crispin a674aabe54 get ready for 3.0
SVN-Revision: 27496
2011-07-06 17:27:17 +00:00
Gabor Juhos abb1ca01a7 ramips: fix buffalo image generation
SVN-Revision: 27495
2011-07-06 16:46:33 +00:00
Imre Kaloz a832965eff add 3.0 support
SVN-Revision: 27493
2011-07-06 13:03:38 +00:00
Imre Kaloz a00596924b refresh patches
SVN-Revision: 27492
2011-07-06 12:57:51 +00:00
Imre Kaloz 90bd74dd8b fixup mtd refresh and co.
SVN-Revision: 27491
2011-07-06 12:55:21 +00:00
Imre Kaloz f24764a372 fix myloader patch, thanks KanjiMonster
SVN-Revision: 27490
2011-07-06 12:48:17 +00:00
John Crispin d42f0c9a1b fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
SVN-Revision: 27489
2011-07-06 10:36:56 +00:00
Imre Kaloz c93b5653bc we have an up-to-date mach-type file now
SVN-Revision: 27486
2011-07-06 10:12:50 +00:00
Imre Kaloz 05790d9cba replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff
SVN-Revision: 27485
2011-07-06 10:09:15 +00:00
Florian Fainelli 00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block
SVN-Revision: 27484
2011-07-06 10:00:39 +00:00
Florian Fainelli 965567a320 refresh 2.6.39 geode patches
SVN-Revision: 27483
2011-07-06 10:00:05 +00:00
Gabor Juhos 1a4e7153b6 ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.

SVN-Revision: 27478
2011-07-06 08:05:00 +00:00
Gabor Juhos d6985f5b46 ramips: use the 'router' LED for diagnostic on the WHR-G300N board
SVN-Revision: 27477
2011-07-06 08:04:55 +00:00
Gabor Juhos 2cc346b8e0 ramips: create tftp image for the WHR-G300N board
SVN-Revision: 27476
2011-07-06 08:04:54 +00:00
Gabor Juhos 0dc18d8586 ramips: create factory image for the WHR-G300N board
SVN-Revision: 27474
2011-07-06 08:04:52 +00:00
Daniel Dickinson 1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
SVN-Revision: 27471
2011-07-06 06:35:24 +00:00
Daniel Dickinson 9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
SVN-Revision: 27470
2011-07-06 06:35:22 +00:00
Imre Kaloz 612a1fcbc4 add some symbols
SVN-Revision: 27464
2011-07-05 21:19:57 +00:00
Florian Fainelli d24fc7ef56 sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)
SVN-Revision: 27457
2011-07-05 12:40:50 +00:00
Imre Kaloz c52560302d add missing symbols
SVN-Revision: 27454
2011-07-05 11:55:31 +00:00
Florian Fainelli 7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533)
SVN-Revision: 27448
2011-07-04 15:04:58 +00:00
Gabor Juhos 89f6b29feb ar71xx: fix building of squashfs images
SVN-Revision: 27446
2011-07-04 12:10:03 +00:00
John Crispin 29653782a9 set DEFAULT_SUBTARGET for lantiq/
SVN-Revision: 27445
2011-07-04 11:21:47 +00:00
John Crispin 04fefa4a28 fix broken falcon patches from last night
SVN-Revision: 27441
2011-07-04 07:50:34 +00:00
Gabor Juhos e9c8218375 ramips: create factory image for DIR-300-B1
SVN-Revision: 27439
2011-07-04 06:48:45 +00:00
Felix Fietkau 7afed2d86c ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)
SVN-Revision: 27434
2011-07-04 03:03:34 +00:00
John Crispin cd8166f3fd AT91: flexibity: add system uci file
SVN-Revision: 27413
2011-07-03 18:55:57 +00:00
John Crispin 349e97f879 AT91: Add flexibity board support
The patch below adds AT91 Flexibity Connect board support.

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>

SVN-Revision: 27412
2011-07-03 18:51:59 +00:00
John Crispin 2975f0aaf1 alix2: add/subtract features as needed
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27411
2011-07-03 17:39:24 +00:00
John Crispin 0a8430bfab use netif_receive_skb on lantiq
Signed-off-by: Luca Olivetti <luca@ventoso.org>

SVN-Revision: 27410
2011-07-03 17:39:05 +00:00
John Crispin 058eca0b3b automatic subtarget enumaration
SVN-Revision: 27407
2011-07-03 17:38:23 +00:00
John Crispin 43771202d3 update lantiq/falcon patches
SVN-Revision: 27406
2011-07-03 17:38:11 +00:00
John Crispin d43cbe24a5 fix description for lantiq target
SVN-Revision: 27405
2011-07-03 17:37:57 +00:00
Gabor Juhos 6e7b802297 ramips: merge 2.6.39 patches
SVN-Revision: 27399
2011-07-03 15:02:10 +00:00
Gabor Juhos 646f64d389 ramips: remove 2.6.37 stuff
SVN-Revision: 27398
2011-07-03 15:02:09 +00:00
Gabor Juhos 2fc6be00f4 ramips: switch to 2.6.39.2
SVN-Revision: 27397
2011-07-03 15:02:07 +00:00
Gabor Juhos 0fde070cf9 ramips: add 2.6.39 support
Based on the patches from #9625

SVN-Revision: 27396
2011-07-03 15:02:06 +00:00
Gabor Juhos c8010517d5 ramips: add hotplug script to extract eeprom for the rt2x00 driver
SVN-Revision: 27393
2011-07-03 15:02:01 +00:00
Gabor Juhos 3334d0604e ramips: specify eeprom file name on RT305X
SVN-Revision: 27392
2011-07-03 15:02:00 +00:00
Gabor Juhos f53cc4c439 ramips: specify eeprom file name on RT288X
SVN-Revision: 27391
2011-07-03 15:01:59 +00:00
Gabor Juhos 129217e127 generic: add rt2x00_platform.h
SVN-Revision: 27390
2011-07-03 15:01:57 +00:00
Gabor Juhos 521e495f4b ramips: add all supported boards to lib/ramips.sh
SVN-Revision: 27389
2011-07-03 15:01:56 +00:00
Gabor Juhos 6f54df889a ramips: check the size of the uImage in image generation
SVN-Revision: 27388
2011-07-03 15:01:55 +00:00
Gabor Juhos 575a5286c8 ramips: use lowercase partiion names on the WCR150GN board
SVN-Revision: 27387
2011-07-03 15:01:53 +00:00
Gabor Juhos 31facf0b75 ramips: use different partition names in the DIR-300-B1 image
SVN-Revision: 27386
2011-07-03 15:01:52 +00:00
Gabor Juhos dbe55f08f0 ramips: force word write on flashes with AMD cmdset (#9252)
SVN-Revision: 27385
2011-07-03 15:01:51 +00:00
Gabor Juhos f1cf43d468 ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.

SVN-Revision: 27384
2011-07-03 15:01:49 +00:00
Gabor Juhos 641c87b127 ramips: consistently use 'firmware' name for sysupgrade partitions
SVN-Revision: 27383
2011-07-03 15:01:48 +00:00
Gabor Juhos 381d7f05af ramips: fix a section mismatch warning
SVN-Revision: 27382
2011-07-03 15:01:46 +00:00
Gabor Juhos 16ad91d69f ramips: remove unused include from the common GPIO code
SVN-Revision: 27381
2011-07-03 15:01:44 +00:00
Gabor Juhos c9f3e7082f ramips: disable watchdog on sysupgrade
SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
Gabor Juhos e70e6f6848 ramips: swap target check in image generation
SVN-Revision: 27379
2011-07-03 15:01:42 +00:00
Gabor Juhos affb57ee27 ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G

Signed-off-by: Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27378
2011-07-03 15:01:41 +00:00
Gabor Juhos 3099ffe414 ramips: set cp0_perfcount_irq for RT305X
SVN-Revision: 27377
2011-07-03 15:01:40 +00:00
Daniel Dickinson f9f3ddebe8 target/patches: This has been sent upstream, but might not appear for a couple of weeks.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27373
2011-07-03 03:20:04 +00:00
Daniel Dickinson b0cc0067f9 target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27371
2011-07-03 03:14:53 +00:00
Daniel Dickinson f2d749ee15 Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.

SVN-Revision: 27370
2011-07-03 03:14:51 +00:00
Daniel Dickinson 209a776f22 Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27369
2011-07-03 03:14:48 +00:00
Daniel Dickinson 88dcf8629d The Geode CS5535 and CS5536 companion chips are backward compatible with the SCx200 I2C drivers.
Include this on Geos.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 27368
2011-07-03 02:59:00 +00:00
Gabor Juhos b3a89652a5 ar71xx: use 4k image only for the AP121 board
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

SVN-Revision: 27357
2011-07-02 08:37:59 +00:00
Imre Kaloz ea8440f4c3 cns21xx belongs to the Econa family, too
SVN-Revision: 27354
2011-07-02 08:31:25 +00:00
Imre Kaloz 535cae8393 mark it broken
SVN-Revision: 27349
2011-07-02 07:26:04 +00:00
Jo-Philipp Wich 701543d3ef revert r27043 (#9513)
SVN-Revision: 27343
2011-07-01 19:52:57 +00:00
Jo-Philipp Wich 1edef5ec98 revert r27341, it introduce wrong behaviour for other models
SVN-Revision: 27342
2011-07-01 19:15:45 +00:00
Jo-Philipp Wich 3b3103b2f1 turn status LED off if device finished initializing
SVN-Revision: 27341
2011-07-01 18:39:53 +00:00
Imre Kaloz 0ba94475c9 upgrade avr32 u-boot to 2011.06
SVN-Revision: 27330
2011-07-01 11:32:01 +00:00