John Crispin
b5bd41edcd
mac80211: add cisco airo
...
airo depends on cfg80211, move it to mac80211
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 49047
2016-03-20 14:41:41 +00:00
Hauke Mehrtens
6d933987db
mac80211: libertas-spi: deactivate for UML target
...
The UML target does not have spi support.
This fixes a build problem found by the build bot.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 49034
2016-03-17 23:09:20 +00:00
John Crispin
553c1b793f
brcmfmac: Add Raspberry Pi 3 support
...
- Enable SDIO support on brcmfmac.
- Disable power managment for brcm2708 target.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49023
2016-03-16 09:26:42 +00:00
Rafał Miłecki
f5317ed5d2
mac80211: backport brcmfmac patchset with driver setting concept
...
This prepares brcmfmac for better country handling and fixes BCM4360
support which was always failing with:
[ 13.249195] brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48959
2016-03-07 22:37:09 +00:00
Felix Fietkau
2cfd943fe9
mac80211: rework gpio chip/button support to build on platforms without CONFIG_GPIOLIB
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48938
2016-03-07 09:20:22 +00:00
Felix Fietkau
6bece706ec
mac80211: ath9k: enable GPIO buttons
...
Enable platform-defined GPIO button support for ath9k device.
Key poller is activated for attached platform buttons.
Requires ath9k GPIO chip access.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
SVN-Revision: 48921
2016-03-05 09:45:03 +00:00
Felix Fietkau
4f8f5a2332
mac80211: improve rate control performance
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48897
2016-03-03 22:29:00 +00:00
Felix Fietkau
806b68fc77
mac80211: add a number of pending fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48883
2016-03-02 14:56:48 +00:00
Felix Fietkau
cafc41ab01
mac80211: refresh patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48882
2016-03-02 14:56:43 +00:00
Felix Fietkau
5158e74cbb
mac80211: ath9k: enable access to GPIO
...
Enable access to GPIO chip and its pins for Atheros AR92xx
wireless devices. For now AR9285 and AR9287 are supported.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 48881
2016-03-02 13:22:51 +00:00
Felix Fietkau
9e74c3af07
mac80211: ath9k: set default state for platform LEDs
...
Support default state for platform LEDs connected to ath9k device.
Now LEDs are correctly set on or off at ath9k module initialization.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 48880
2016-03-02 13:22:46 +00:00
Felix Fietkau
a8c15c0204
mac80211: ath9k: enable platform WLAN LED name
...
Enable platform-supplied WLAN LED name for ath9k device.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
SVN-Revision: 48879
2016-03-02 13:22:40 +00:00
Rafał Miłecki
53814290e7
mac80211: backport brcmfmac fix for primary channel in 80 MHz mode
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48782
2016-02-25 20:24:47 +00:00
Rafał Miłecki
b24accd72d
mac80211: backport brcmfmac fix for sdio sg table alloc crash
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48781
2016-02-25 20:24:38 +00:00
Felix Fietkau
3064f16863
mac80211: fix an RTS/CTS issue in minstrel_ht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48759
2016-02-25 09:24:13 +00:00
Felix Fietkau
2f7dcdec58
mac80211: sync a-msdu tx patch with the latest upstream submission
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48758
2016-02-25 09:24:09 +00:00
Felix Fietkau
cd33dd3f7c
mac80211: add packages libertas-spi module and firmware
...
This adds option to build kernel module and firmware packages
for a Marvell 8686 SPI Wireless device
Signed-off-by: Joseph Honold <mozzwald@gmail.com>
SVN-Revision: 48750
2016-02-22 08:54:08 +00:00
Felix Fietkau
b9e910d658
mac80211: set default aggregation timeout to 0 to improve stability
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48744
2016-02-18 18:55:46 +00:00
Felix Fietkau
42fc062d47
mac80211: update A-MSDU tx support to the latest version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48743
2016-02-18 18:55:35 +00:00
Felix Fietkau
6cfc7db8a2
mac80211: fix a crash in monitor mode injection
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48719
2016-02-14 12:26:49 +00:00
Felix Fietkau
533147beb2
mac80211: improve a-msdu rx performance by avoiding unnecessary data copying
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48673
2016-02-08 13:38:11 +00:00
Felix Fietkau
446d06edac
mac80211: fix a memory leak in a-msdu rx
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48672
2016-02-08 13:38:03 +00:00
Felix Fietkau
21e716dbec
mac80211: update A-MSDU tx patch to the latest version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48671
2016-02-08 13:37:55 +00:00
Felix Fietkau
f3761eaacc
mac80211: refresh patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48670
2016-02-08 13:37:47 +00:00
Rafał Miłecki
6ef21fb874
mac80211: fix flowrings infinite loops in brcmfmac on BCM4366
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48653
2016-02-07 23:12:38 +00:00
Felix Fietkau
04573657d0
mac80211: merge a fix for minstrel expected throughput reporting
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48648
2016-02-07 14:30:01 +00:00
Felix Fietkau
1933dc0aa3
mac80211: merge a few mesh fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48647
2016-02-07 14:29:51 +00:00
Felix Fietkau
522bba5e42
ath9k: merge fix for noise floor calibration
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48641
2016-02-07 13:29:08 +00:00
Rafał Miłecki
d99cdd4fef
mac80211: add first brcmfmac patches for 14e4:4365 BCM4366 support
...
It's not really supported yet as it still fails with:
brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48640
2016-02-06 17:10:10 +00:00
Felix Fietkau
b0c782be70
mac80211: add A-MSDU tx support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48637
2016-02-05 16:43:38 +00:00
Felix Fietkau
351be0fdec
mac80211: parse legacy and HT rates in monitor mode injected frames
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48636
2016-02-05 16:43:25 +00:00
Felix Fietkau
ba1672bf2b
mac80211: add performance improvements for A-MSDU rx
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48630
2016-02-04 20:17:25 +00:00
Felix Fietkau
7695d614df
mac80211: backport skb_free_frag and napi_alloc_frag
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48582
2016-01-31 16:13:23 +00:00
Felix Fietkau
a6fe27a59a
mac80211: fix an out of bounds access issue in minstrel_ht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48550
2016-01-29 14:23:23 +00:00
Felix Fietkau
c1e6ef488f
mac80211: merge a bunch of pending fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48536
2016-01-28 22:42:10 +00:00
Felix Fietkau
07160c774c
mac80211: add iremap cflags
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48490
2016-01-25 15:49:36 +00:00
Rafał Miłecki
529d527e2c
kernel: backport bcma stuff sent for 4.6
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48449
2016-01-22 09:22:37 +00:00
Felix Fietkau
baa618790a
ath9k: allow multiple virtual interfaces on DFS channels
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48448
2016-01-22 00:54:34 +00:00
Felix Fietkau
145a6e9db9
mac80211: only strip the platform/ prefix from path for pci devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48440
2016-01-21 15:55:35 +00:00
Felix Fietkau
d13a1ce9d7
mac80211: fix check for existing config section from r48426
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48439
2016-01-21 15:51:52 +00:00
Felix Fietkau
df9275b25e
ath9k: ignore EEPROM mismatch on flash based devices ( fixes #21611 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48438
2016-01-21 15:37:43 +00:00
Felix Fietkau
d9b20a6f35
mac80211: strip platform/ prefix from device path to improve compatibility between kernel versions
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48426
2016-01-21 13:28:09 +00:00
Felix Fietkau
95965cd813
mac80211: make the path phy lookup more robust regarding config upgrades, allow partial path matching
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48425
2016-01-21 13:28:04 +00:00
Felix Fietkau
82c5e2c497
mac80211: update to wireless-testing 2016-01-10
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48247
2016-01-15 15:03:48 +00:00
Felix Fietkau
cb85e21fd1
ath9k: add support for a newer tx gain table used in some TP-Link devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48233
2016-01-14 02:17:49 +00:00
Imre Kaloz
2a170e4086
mac80211: resync regulatory db with master-2015-12-14
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 48219
2016-01-12 14:28:09 +00:00
Felix Fietkau
a960fcef29
mac80211: move b43legacy firmware to a separate package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48184
2016-01-10 16:37:01 +00:00
Felix Fietkau
805c40351e
mac80211: remove linux-firmware download
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48183
2016-01-10 16:36:54 +00:00
Felix Fietkau
26eb793589
mac80211: move broadcom firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48182
2016-01-10 16:36:48 +00:00
Felix Fietkau
4a791c8d4e
mac80211: move ti firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48181
2016-01-10 16:36:40 +00:00
Felix Fietkau
78efb85fa1
mac80211: move mediatek/ralink firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48180
2016-01-10 16:36:31 +00:00
Felix Fietkau
9e5df4a939
mac80211: move atheros/qca firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48179
2016-01-10 16:36:25 +00:00
Felix Fietkau
6d0d89dc65
mac80211: move marvell firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48178
2016-01-10 16:36:17 +00:00
Felix Fietkau
35baa05d80
mac80211: move intel firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48177
2016-01-10 16:36:08 +00:00
Felix Fietkau
9dee1adc0f
mac80211: move realtek firmware to the linux-firmware package
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48176
2016-01-10 16:36:00 +00:00
Zoltan Herpai
c03f792aac
mac80211: brcmfmac: copy SDIO firmwares when CONFIG_BRCMFMAC_SDIO is selected
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48162
2016-01-09 16:46:42 +00:00
Felix Fietkau
1f5f096faa
mac80211: add rtl8xxxu
...
OpenWrt is often used to develop or test new devices
Some users might want to test and help to improve
this new driver
upstream commit notice 26f1fad29ad973b0fb26a9ca3dcb2a73dde781aa
New driver: rtl8xxxu (mac80211)
This is an alternate driver for a number of Realtek WiFi USB devices,
including RTL8723AU, RTL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU.
It was written from scratch utilizing the Linux mac80211 stack.
After spending months cleaning up the vendor provided rtl8723au
driver, which comes with it's own 802.11 stack included, I decided to
rewrite this driver from the bottom up.
Many thanks to Johannes Berg for 802.11 insights and help and Larry
Finger for help with the vendor driver.
The full git log for the development of this driver can be found here:
git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git
branch rtl8723au-mac80211
This driver is still under development, but has proven to be very
stable for me. It currently supports station mode only. It has support
for OFDM and CCK rates. It does lack certain features found in the
staging driver, such as power management, AMPDU, and 40MHz channel
support. In addition it does not support AD-HOC, AP, and monitor mode
support at this point.
The driver is known to work with the following devices:
Lenovo Yoga (rtl8723au)
TP-Link TL-WN823N (rtl8192cu)
Etekcity 6R (rtl8188cu)
Daffodil LAN03 (rtl8188cu)
Alfa AWUS036NHR (rtl8188ru)
Compile tested only
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 48104
2016-01-03 20:57:38 +00:00
Felix Fietkau
0f84880a9d
mac80211: iwlwifi: update firmware to ucode -16 version
...
We don't use Kernel drivers but ucode -16 is
usable on Kernel 4.3+ - with backports and mac80211
this should work on older Kernel versions too.
Intel does not provide a changelog.
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 48103
2016-01-03 20:57:31 +00:00
Felix Fietkau
eee06021ca
mac80211: mt7601u use linux-firmware
...
upstream added mt7601u firmware with commit
9df5430a3c1bf4fa92d9198b6d7d8713408ff6bc Add firmware for mt7601u. version 34
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 48102
2016-01-03 20:57:23 +00:00
Felix Fietkau
2a0e1b7f8d
mac80211: merge a fix for a ps-poll handling issue
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47958
2015-12-20 21:28:30 +00:00
John Crispin
932bc8d5eb
ath9k: Allow configuration of LED polarity in platform data.
...
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 47910
2015-12-17 09:27:24 +00:00
John Crispin
4a4b0b82ec
ath9k: Pass LED polarity to ath_create_gpio_led when initializing the LEDs.
...
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 47909
2015-12-17 09:27:18 +00:00
Imre Kaloz
6b04b44e21
mac80211: use the linux-firmware tree from 2015-12-07
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47822
2015-12-10 12:17:24 +00:00
Jo-Philipp Wich
3041fbb4d2
mac80211: fix passing of VHT80 in IBSS mode
...
The "iw" utility expects the VHT80 to be specified as uppercase "80MHZ",
change the script to reflect that.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47814
2015-12-09 15:19:41 +00:00
Jo-Philipp Wich
713f698bd4
mac80211: fix disabling HT in IBSS mode ( #21340 )
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47813
2015-12-09 15:18:43 +00:00
Hauke Mehrtens
96a938d082
mac80211: fix build of mac80211-hwsim on kernel 4.4
...
This genl_notify() backport should not be applied for kernel 4.4.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47795
2015-12-06 13:31:58 +00:00
Felix Fietkau
028666e75f
mac80211: Allow to select VHT80 in IBSS mode
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47781
2015-12-05 09:52:10 +00:00
Felix Fietkau
8d580cd7f2
mac80211: Allow enabling tracing for the drivers that support it
...
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47776
2015-12-05 09:51:35 +00:00
Felix Fietkau
ba0ba1e1f5
mac80211: enable build with linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47772
2015-12-04 22:40:38 +00:00
Felix Fietkau
70ac77f869
mac80211: update to 2015-12-03
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47771
2015-12-04 22:39:37 +00:00
Jonas Gorski
418a9d4972
mac80211: put the !LINUX_4_4 dependency in the right place
...
Make sure all sub packages are marked as not building for 4.4.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47712
2015-12-03 11:01:34 +00:00
Jonas Gorski
4454a3fb63
package: kernel: update dependencies for 4.4
...
Update dependencies for linux 4.4 and mark as broken where source code
needs updating.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47700
2015-12-02 22:19:31 +00:00
Hauke Mehrtens
40a09b93d2
mac80211: install new firmware for ath9k-htc on target
...
For quite some time new firmware for ath9k-htc devices
is available in
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath9k_htc/
Moreover ath9k-htc kernel driver expects this new v1.4
firmware to exist in /lib/firmware/ath9k_htc.
What happens currently:
---------------------------->8--------------------------
[ 7.830000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 7.840000] usb 1-1: Direct firmware load for
ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[ 7.850000] usb 1-1: Falling back to user helper
[ 7.870000] usbcore: registered new interface driver ath9k_htc
[ 7.880000] firmware ath9k_htc!htc_9271-1.4.0.fw:
firmware_loading_store: map pages failed
[ 7.890000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 8.200000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size:
50980
[ 8.440000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 10.720000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 10.740000] ath9k_htc 1-1:1.0: FW RMW support: Off
[ 10.760000] ieee80211 phy0: Atheros AR9271 Rev:1
---------------------------->8--------------------------
And with that patch new firmware is used instead:
---------------------------->8--------------------------
[ 33.920000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 34.230000] usb 1-1: ath9k_htc: Transferred FW:
ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 34.480000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 34.740000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[ 34.750000] ath9k_htc 1-1:1.0: FW RMW support: On
---------------------------->8--------------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47693
2015-12-02 20:32:11 +00:00
John Crispin
48c709e86d
mac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanced set/clear of beacon enable bit
...
Signed-off-by: evaxige <evaxige@qq.com>
SVN-Revision: 47668
2015-11-28 23:24:59 +00:00
Felix Fietkau
a4e234d278
ath10k: fix memory allocation issues on platforms where DMA coherent memory is constrained
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47625
2015-11-24 19:09:45 +00:00
John Crispin
27ac4ce928
mac80211: fix autoprobing of mt7601u driver
...
Strigng passed to autoprobing script should match
module's name. Currently that string is missing trailing "u".
With that change mt7601u driver really gets autoloaded on
USB Wi-Fi dongle insertion:
------------------>8---------------
[ 0.930000] hub 2-0:1.0: USB hub found
[ 0.940000] hub 2-0:1.0: 1 port detected
[ 1.150000] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[ 1.720000] init: - preinit -
Detected arc-sdp // Synopsys AXS101 Development Board
[ 1.810000] random: mktemp urandom read with 3 bits of entropy
available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug
level
[ 4.940000] procd: - early -
[ 5.540000] procd: - ubus -
[ 6.550000] procd: - init -
Please press Enter to activate this console.
[ 7.160000] Loading modules backported from Linux version
master-2015-10-26-0-g28c26cb
[ 7.170000] Backport generated by backports.git
backports-20150903-4-g12cf266
[ 7.200000] cfg80211: World regulatory domain updated:
[ 7.230000] cfg80211: DFS Master region: unset
[ 7.230000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.270000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.290000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.310000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 7.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.330000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 7.470000] usb 1-1: reset high-speed USB device number 2 using
ehci-platform
[ 7.620000] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision:
76010500
[ 7.630000] mt7601u 1-1:1.0: Firmware Version: 0.1.00 Build: 7640
Build time: 201302052146____
[ 8.040000] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d
[ 8.050000] mt7601u 1-1:1.0: EEPROM ver:0d fae:00
[ 8.050000] mt7601u 1-1:1.0: EEPROM country region 01 (channels 1-13)
[ 8.320000] usbcore: registered new interface driver mt7601u
------------------>8---------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47556
2015-11-21 21:24:28 +00:00
Felix Fietkau
988be54b22
ath10k: select kernel relayfs support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47548
2015-11-21 10:55:36 +00:00
Rafał Miłecki
b2dab45aa7
kernel: backport ssb changes from 4.4-rc1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47483
2015-11-16 06:55:38 +00:00
Hauke Mehrtens
cb0c8da7c2
kernel: take bcm47xx_nvram.h from kernel and not backports
...
compat-wireless/backports now contains a bcm47xx_nvram.h file to
backport some of the functions in it which are used by the bcmfmac
driver. This file just checks for the kernel versions and provide an
empty implementations on older kernel versions. This is OK on most
systems, but on bcm47xx / bcm53xx systems we want to call the real
functions here. This commit removes the file from backports in our
build process like we do it with the bcma and ssb header files. Instead
we add a recent version into our kernel so all code uses only one
header file. On bcm47xx / bcm53xx the real implementations of this code
will be used.
Reported-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47467
2015-11-13 23:51:31 +00:00
Felix Fietkau
d293f33558
mac80211: restricted automatic channel selection
...
Add a new config option "channels" for mac80211 wifi devices. It's only
valid if automatic channel selection is used and restricts the channel
selection to one of the given channels.
config wifi-device
list channels 1
list channels 6
list channels 11
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 47427
2015-11-08 20:40:15 +00:00
Felix Fietkau
08f1e1b3ac
mac80211: set mcast-rate for mesh point interfaces
...
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.
Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface in mac80211_prepare_vif(),
while using authentication would create the interface first, then join
later in mac80211_setup_vif() by starting authsae.
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
SVN-Revision: 47408
2015-11-07 12:52:01 +00:00
Felix Fietkau
0afee71820
mac80211: disable a broken feature that was merged with the last update
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47402
2015-11-07 12:12:08 +00:00
Felix Fietkau
356008e748
mac80211: fix kconf handling of allnoconfig, fixes spurious brcmfmac related build errors
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47371
2015-11-03 12:00:36 +00:00
Felix Fietkau
7224c5d249
mac80211: fix crash when using mesh (11s) VIF together with another VIF
...
llid_in_use needs to be limited to stations of the same VIF, otherwise it
will cause a NULL deref as the sta_info of non-mesh-VIFs don't have
sta->mesh set.
Steps to reproduce:
modprobe mac80211_hwsim channels=2
iw phy phy0 interface add ibss0 type ibss
iw phy phy0 interface add mesh0 type mp
iw phy phy1 interface add ibss1 type ibss
iw phy phy1 interface add mesh1 type mp
ip link set ibss0 up
ip link set mesh0 up
ip link set ibss1 up
ip link set mesh1 up
iw dev ibss0 ibss join foo 2412
iw dev ibss1 ibss join foo 2412
# Ensure that ibss0 and ibss1 are actually associated; I often need to
# leave and join the cell on ibss1 a second time.
iw dev mesh0 mesh join bar
iw dev mesh1 mesh join bar # crash
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47364
2015-11-02 18:26:15 +00:00
Felix Fietkau
8babf4654c
mac80211: update regulatory database to master-2015-10-22
...
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47297
2015-10-30 22:31:05 +00:00
Felix Fietkau
3fd8621f62
ath10k: split out ath10k firmware into a separate source package and .ipk
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47294
2015-10-30 22:01:18 +00:00
Felix Fietkau
ce09894398
mac80211: add pending ath9k/ath10k patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47287
2015-10-30 15:18:03 +00:00
Felix Fietkau
ec3ee0969e
mac80211: update to wireless-testing 2015-10-26
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47286
2015-10-30 15:17:56 +00:00
Felix Fietkau
42cad88e8f
mac80211: add a fix to initialize the tid field in the tx queue struct
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47142
2015-10-05 15:43:14 +00:00
Rafał Miłecki
439669b49c
mac80211: backport patch setting TX power in interface info
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47059
2015-09-27 10:25:27 +00:00
Felix Fietkau
6e97442105
ath9k: fix handling of tx headroom for padding ( fixes #20556 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47042
2015-09-24 15:02:15 +00:00
Felix Fietkau
528d38b4e9
mac80211: fix a few issues with fast-xmit support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47041
2015-09-24 15:02:07 +00:00
Felix Fietkau
df190f4522
ath10k: remove API v2 firmware, it is no longer needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47009
2015-09-21 17:18:43 +00:00
Felix Fietkau
69391f49b5
mac80211: add missing dependency for the hermes driver ( #20543 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46998
2015-09-18 09:05:11 +00:00
John Crispin
cb632b2d3b
mac80211: rename iwlagn to iwlwifi
...
follow upstream module rename
commit 3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46979
2015-09-16 09:37:27 +00:00
John Crispin
5650c28037
mac80211: cleanup sort
...
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46978
2015-09-16 09:37:18 +00:00
John Crispin
0d41307073
mac80211: cleanup remove net prefixes
...
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46977
2015-09-16 09:37:11 +00:00
Felix Fietkau
3dc3275b38
mac80211: refresh patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46949
2015-09-16 07:56:47 +00:00
Felix Fietkau
5fa9ed8c10
ath9k: enable hw manual peak calibration for QCA9561
...
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46948
2015-09-16 07:56:41 +00:00
Felix Fietkau
42a3d7811f
mac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers in hostapd makefile
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46903
2015-09-14 06:51:10 +00:00