Felix Fietkau
|
005fe5d1fd
|
ar71xx: make sure that rx and interrupts are disabled before issuing the hardware reset
SVN-Revision: 27702
|
2011-07-20 12:04:29 +00:00 |
Felix Fietkau
|
e7ab000008
|
ar71xx: increase the delay after the ethernet MAC reset
SVN-Revision: 27701
|
2011-07-20 12:04:25 +00:00 |
Felix Fietkau
|
255dcaa3a6
|
ar71xx: fix an unused variable warning
SVN-Revision: 27700
|
2011-07-20 12:04:20 +00:00 |
John Crispin
|
8acc276692
|
sync default kernel config for lantiq danube/ar9
SVN-Revision: 27697
|
2011-07-19 18:08:09 +00:00 |
John Crispin
|
500d7d4bc8
|
fix etehrnet when using EPHY on lantiq ASE
SVN-Revision: 27696
|
2011-07-19 18:06:52 +00:00 |
John Crispin
|
78a9b1a2ad
|
fixes pci on lantiq AR9 SoC
SVN-Revision: 27695
|
2011-07-19 18:06:42 +00:00 |
John Crispin
|
3833b7be24
|
add support for more lantiq AR9 boards
SVN-Revision: 27694
|
2011-07-19 18:06:33 +00:00 |
Felix Fietkau
|
fee32761f3
|
kernel: backport and enable tmpfs xattr support for 2.6.39
SVN-Revision: 27691
|
2011-07-19 09:00:55 +00:00 |
John Crispin
|
6b8c119b41
|
* fix external interrupts
SVN-Revision: 27687
|
2011-07-18 16:27:11 +00:00 |
John Crispin
|
5906377332
|
* add gigasx76x update
* rebase patches
* add arv752DPW arv7525PD
* fixes gpio_keys
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 27665
|
2011-07-17 19:27:44 +00:00 |
Florian Fainelli
|
3994a2d1f9
|
add additionnal debug symbols when kernel debugging is enabled
SVN-Revision: 27637
|
2011-07-17 12:30:04 +00:00 |
Florian Fainelli
|
9c7294f7c7
|
add ehci support to DWV-S0 board (#9059)
SVN-Revision: 27622
|
2011-07-16 08:39:04 +00:00 |
Florian Fainelli
|
930485561c
|
fix GEN_SPI_RSET_BASE macro (#9697)
SVN-Revision: 27604
|
2011-07-13 09:33:11 +00:00 |
Imre Kaloz
|
ab5fd3c1cb
|
upgrade to 3.0-rc7
SVN-Revision: 27600
|
2011-07-12 13:44:16 +00:00 |
Imre Kaloz
|
0321740a62
|
upgrade to 3.0-rc6 and optimize for armv5te again
SVN-Revision: 27592
|
2011-07-11 20:35:16 +00:00 |
Felix Fietkau
|
f3d693c0ee
|
ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state
SVN-Revision: 27568
|
2011-07-09 06:30:13 +00:00 |
Felix Fietkau
|
2806c75c07
|
ag71xx: keep the rx engine stopped while the link is not up, should hopefully fix stability issues from #9405
SVN-Revision: 27567
|
2011-07-09 06:29:46 +00:00 |
Imre Kaloz
|
8788b97e65
|
use the new upstream l2cache and wdt code, smaller changes, refresh patches
SVN-Revision: 27558
|
2011-07-08 09:41:07 +00:00 |
Imre Kaloz
|
b3b0f0e49a
|
add mpcore_wdt fixes
SVN-Revision: 27557
|
2011-07-08 09:33:13 +00:00 |
John Crispin
|
7f548d379f
|
fix generation of falcon images for profiles
SVN-Revision: 27550
|
2011-07-07 20:20:51 +00:00 |
John Crispin
|
d7732885ed
|
adds 2 ASC related patches to lantiq
Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
SVN-Revision: 27549
|
2011-07-07 20:20:46 +00:00 |
John Crispin
|
b75a8fb532
|
fix up falcon kernel config
SVN-Revision: 27542
|
2011-07-07 18:20:56 +00:00 |
John Crispin
|
036df9f088
|
fix i2c-falcon kmod package selection
SVN-Revision: 27541
|
2011-07-07 18:20:51 +00:00 |
John Crispin
|
a463daa818
|
replace all references to xway with danube
SVN-Revision: 27538
|
2011-07-07 18:20:37 +00:00 |
John Crispin
|
dc2af33083
|
fix lantiq image makefile to represent new split between ar9 and danube
SVN-Revision: 27537
|
2011-07-07 18:20:31 +00:00 |
John Crispin
|
3c1079a7a7
|
add ar9 specific profile
SVN-Revision: 27536
|
2011-07-07 18:20:27 +00:00 |
John Crispin
|
09d547eae4
|
rename xway profile to danube and remove ar9 specifics
SVN-Revision: 27535
|
2011-07-07 18:20:21 +00:00 |
John Crispin
|
f177052c9d
|
remove ar9 board from xway profiles
SVN-Revision: 27534
|
2011-07-07 18:20:16 +00:00 |
John Crispin
|
dc69e5f2e3
|
remove CONFIG_MTD_PARTITIONS references from lantiq 3.0 patches
SVN-Revision: 27532
|
2011-07-07 18:20:07 +00:00 |
Imre Kaloz
|
79fa6c693a
|
refresh patches
SVN-Revision: 27528
|
2011-07-07 17:18:50 +00:00 |
Imre Kaloz
|
b8227050fb
|
refresh patches
SVN-Revision: 27527
|
2011-07-07 17:18:06 +00:00 |
Imre Kaloz
|
92981b6bb3
|
enable smp support
SVN-Revision: 27526
|
2011-07-07 17:17:44 +00:00 |
Imre Kaloz
|
94055a90a7
|
make smp code more similar to upstream
SVN-Revision: 27525
|
2011-07-07 17:17:06 +00:00 |
Imre Kaloz
|
42df203852
|
3.0 is at rc6 now
SVN-Revision: 27524
|
2011-07-07 13:30:41 +00:00 |
Gabor Juhos
|
5ad4040c49
|
ar71xx: build image for the AP121 boards with 4M of flash
SVN-Revision: 27523
|
2011-07-07 13:01:50 +00:00 |
Gabor Juhos
|
cdcb10ee42
|
ar71xx: add separate profiles for the AP121 and AP121-MINI boards
SVN-Revision: 27522
|
2011-07-07 13:01:48 +00:00 |
Imre Kaloz
|
b15f8f765a
|
add support for and switch to XZ compressed kernels on ARM
SVN-Revision: 27518
|
2011-07-07 10:26:16 +00:00 |
Imre Kaloz
|
d148dcce05
|
select the right cpu
SVN-Revision: 27517
|
2011-07-07 10:24:37 +00:00 |
Florian Fainelli
|
a3e343b722
|
fix building of perf for arm on uclibc
SVN-Revision: 27514
|
2011-07-07 09:43:00 +00:00 |
Florian Fainelli
|
a4d69536ea
|
enable support for perf events
SVN-Revision: 27512
|
2011-07-07 09:42:53 +00:00 |
Florian Fainelli
|
0cb42cf9a4
|
enable perf counter support
SVN-Revision: 27511
|
2011-07-07 09:42:50 +00:00 |
Daniel Dickinson
|
0d8b0e937d
|
base-files: diag.sh: added failsafe led definition
SVN-Revision: 27502
|
2011-07-07 03:09:20 +00:00 |
John Crispin
|
a674aabe54
|
get ready for 3.0
SVN-Revision: 27496
|
2011-07-06 17:27:17 +00:00 |
Gabor Juhos
|
abb1ca01a7
|
ramips: fix buffalo image generation
SVN-Revision: 27495
|
2011-07-06 16:46:33 +00:00 |
Imre Kaloz
|
a832965eff
|
add 3.0 support
SVN-Revision: 27493
|
2011-07-06 13:03:38 +00:00 |
Imre Kaloz
|
a00596924b
|
refresh patches
SVN-Revision: 27492
|
2011-07-06 12:57:51 +00:00 |
Imre Kaloz
|
90bd74dd8b
|
fixup mtd refresh and co.
SVN-Revision: 27491
|
2011-07-06 12:55:21 +00:00 |
Imre Kaloz
|
f24764a372
|
fix myloader patch, thanks KanjiMonster
SVN-Revision: 27490
|
2011-07-06 12:48:17 +00:00 |
John Crispin
|
d42f0c9a1b
|
fixes mtd maps for lantiq easy50712 and easy50601 evalkit. without this patch mini_fo/jffs caused the uboot to be overwritten on firstboot
SVN-Revision: 27489
|
2011-07-06 10:36:56 +00:00 |
Imre Kaloz
|
c93b5653bc
|
we have an up-to-date mach-type file now
SVN-Revision: 27486
|
2011-07-06 10:12:50 +00:00 |
Imre Kaloz
|
05790d9cba
|
replace the cut down machtype with the full one, as we support a lot of not-yet-upstreamed stuff
SVN-Revision: 27485
|
2011-07-06 10:09:15 +00:00 |
Florian Fainelli
|
00ad56b73e
|
move board_HW553 inside the ifdef ..BCM6358 .. endif block
SVN-Revision: 27484
|
2011-07-06 10:00:39 +00:00 |
Florian Fainelli
|
965567a320
|
refresh 2.6.39 geode patches
SVN-Revision: 27483
|
2011-07-06 10:00:05 +00:00 |
Gabor Juhos
|
1a4e7153b6
|
ramips: add diag support for RT-N15 and PWH2004
Also sort the board names alphabetically.
SVN-Revision: 27478
|
2011-07-06 08:05:00 +00:00 |
Gabor Juhos
|
d6985f5b46
|
ramips: use the 'router' LED for diagnostic on the WHR-G300N board
SVN-Revision: 27477
|
2011-07-06 08:04:55 +00:00 |
Gabor Juhos
|
2cc346b8e0
|
ramips: create tftp image for the WHR-G300N board
SVN-Revision: 27476
|
2011-07-06 08:04:54 +00:00 |
Gabor Juhos
|
0dc18d8586
|
ramips: create factory image for the WHR-G300N board
SVN-Revision: 27474
|
2011-07-06 08:04:52 +00:00 |
Daniel Dickinson
|
1141165bb9
|
Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
SVN-Revision: 27471
|
2011-07-06 06:35:24 +00:00 |
Daniel Dickinson
|
9dc72505a2
|
profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
SVN-Revision: 27470
|
2011-07-06 06:35:22 +00:00 |
Imre Kaloz
|
612a1fcbc4
|
add some symbols
SVN-Revision: 27464
|
2011-07-05 21:19:57 +00:00 |
Florian Fainelli
|
d24fc7ef56
|
sched_connmark depends on NF_CONNTRACK_MARK (#8976, #9423)
SVN-Revision: 27457
|
2011-07-05 12:40:50 +00:00 |
Imre Kaloz
|
c52560302d
|
add missing symbols
SVN-Revision: 27454
|
2011-07-05 11:55:31 +00:00 |
Florian Fainelli
|
7c3bbe150a
|
hw553: fix missing has_uart0 in board definition (#9533)
SVN-Revision: 27448
|
2011-07-04 15:04:58 +00:00 |
Gabor Juhos
|
89f6b29feb
|
ar71xx: fix building of squashfs images
SVN-Revision: 27446
|
2011-07-04 12:10:03 +00:00 |
John Crispin
|
29653782a9
|
set DEFAULT_SUBTARGET for lantiq/
SVN-Revision: 27445
|
2011-07-04 11:21:47 +00:00 |
John Crispin
|
04fefa4a28
|
fix broken falcon patches from last night
SVN-Revision: 27441
|
2011-07-04 07:50:34 +00:00 |
Gabor Juhos
|
e9c8218375
|
ramips: create factory image for DIR-300-B1
SVN-Revision: 27439
|
2011-07-04 06:48:45 +00:00 |
Felix Fietkau
|
7afed2d86c
|
ar71xx: add wzr-hp-ag300h sysupgrade support (patch from #9650)
SVN-Revision: 27434
|
2011-07-04 03:03:34 +00:00 |
John Crispin
|
cd8166f3fd
|
AT91: flexibity: add system uci file
SVN-Revision: 27413
|
2011-07-03 18:55:57 +00:00 |
John Crispin
|
349e97f879
|
AT91: Add flexibity board support
The patch below adds AT91 Flexibity Connect board support.
Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>
SVN-Revision: 27412
|
2011-07-03 18:51:59 +00:00 |
John Crispin
|
2975f0aaf1
|
alix2: add/subtract features as needed
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27411
|
2011-07-03 17:39:24 +00:00 |
John Crispin
|
0a8430bfab
|
use netif_receive_skb on lantiq
Signed-off-by: Luca Olivetti <luca@ventoso.org>
SVN-Revision: 27410
|
2011-07-03 17:39:05 +00:00 |
John Crispin
|
058eca0b3b
|
automatic subtarget enumaration
SVN-Revision: 27407
|
2011-07-03 17:38:23 +00:00 |
John Crispin
|
43771202d3
|
update lantiq/falcon patches
SVN-Revision: 27406
|
2011-07-03 17:38:11 +00:00 |
John Crispin
|
d43cbe24a5
|
fix description for lantiq target
SVN-Revision: 27405
|
2011-07-03 17:37:57 +00:00 |
Gabor Juhos
|
6e7b802297
|
ramips: merge 2.6.39 patches
SVN-Revision: 27399
|
2011-07-03 15:02:10 +00:00 |
Gabor Juhos
|
646f64d389
|
ramips: remove 2.6.37 stuff
SVN-Revision: 27398
|
2011-07-03 15:02:09 +00:00 |
Gabor Juhos
|
2fc6be00f4
|
ramips: switch to 2.6.39.2
SVN-Revision: 27397
|
2011-07-03 15:02:07 +00:00 |
Gabor Juhos
|
0fde070cf9
|
ramips: add 2.6.39 support
Based on the patches from #9625
SVN-Revision: 27396
|
2011-07-03 15:02:06 +00:00 |
Gabor Juhos
|
c8010517d5
|
ramips: add hotplug script to extract eeprom for the rt2x00 driver
SVN-Revision: 27393
|
2011-07-03 15:02:01 +00:00 |
Gabor Juhos
|
3334d0604e
|
ramips: specify eeprom file name on RT305X
SVN-Revision: 27392
|
2011-07-03 15:02:00 +00:00 |
Gabor Juhos
|
f53cc4c439
|
ramips: specify eeprom file name on RT288X
SVN-Revision: 27391
|
2011-07-03 15:01:59 +00:00 |
Gabor Juhos
|
129217e127
|
generic: add rt2x00_platform.h
SVN-Revision: 27390
|
2011-07-03 15:01:57 +00:00 |
Gabor Juhos
|
521e495f4b
|
ramips: add all supported boards to lib/ramips.sh
SVN-Revision: 27389
|
2011-07-03 15:01:56 +00:00 |
Gabor Juhos
|
6f54df889a
|
ramips: check the size of the uImage in image generation
SVN-Revision: 27388
|
2011-07-03 15:01:55 +00:00 |
Gabor Juhos
|
575a5286c8
|
ramips: use lowercase partiion names on the WCR150GN board
SVN-Revision: 27387
|
2011-07-03 15:01:53 +00:00 |
Gabor Juhos
|
31facf0b75
|
ramips: use different partition names in the DIR-300-B1 image
SVN-Revision: 27386
|
2011-07-03 15:01:52 +00:00 |
Gabor Juhos
|
dbe55f08f0
|
ramips: force word write on flashes with AMD cmdset (#9252)
SVN-Revision: 27385
|
2011-07-03 15:01:51 +00:00 |
Gabor Juhos
|
f1cf43d468
|
ramips: update partition map for DIR-300-B1
Patch by Layne Edwards from #9252.
SVN-Revision: 27384
|
2011-07-03 15:01:49 +00:00 |
Gabor Juhos
|
641c87b127
|
ramips: consistently use 'firmware' name for sysupgrade partitions
SVN-Revision: 27383
|
2011-07-03 15:01:48 +00:00 |
Gabor Juhos
|
381d7f05af
|
ramips: fix a section mismatch warning
SVN-Revision: 27382
|
2011-07-03 15:01:46 +00:00 |
Gabor Juhos
|
16ad91d69f
|
ramips: remove unused include from the common GPIO code
SVN-Revision: 27381
|
2011-07-03 15:01:44 +00:00 |
Gabor Juhos
|
c9f3e7082f
|
ramips: disable watchdog on sysupgrade
SVN-Revision: 27380
|
2011-07-03 15:01:43 +00:00 |
Gabor Juhos
|
e70e6f6848
|
ramips: swap target check in image generation
SVN-Revision: 27379
|
2011-07-03 15:01:42 +00:00 |
Gabor Juhos
|
affb57ee27
|
ramips: update HW550-3G mtd partitions
This patch updates the mtd partitions for the Aztech HW550-3G
Signed-off-by: Layne Edwards <ledwards@astrumtech.net>
SVN-Revision: 27378
|
2011-07-03 15:01:41 +00:00 |
Gabor Juhos
|
3099ffe414
|
ramips: set cp0_perfcount_irq for RT305X
SVN-Revision: 27377
|
2011-07-03 15:01:40 +00:00 |
Daniel Dickinson
|
f9f3ddebe8
|
target/patches: This has been sent upstream, but might not appear for a couple of weeks.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27373
|
2011-07-03 03:20:04 +00:00 |
Daniel Dickinson
|
b0cc0067f9
|
target/patches: Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27371
|
2011-07-03 03:14:53 +00:00 |
Daniel Dickinson
|
f2d749ee15
|
Revert "Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped."
This reverts commit c485487b63d1c1de72a375f1278d8a98546ba3af.
SVN-Revision: 27370
|
2011-07-03 03:14:51 +00:00 |
Daniel Dickinson
|
209a776f22
|
Like the earlier mfgpt patch, the new GPIO drivers also require the MFD driver to be present for the BAR's to be mapped.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27369
|
2011-07-03 03:14:48 +00:00 |