a5c0ad6354
brcm47xx: add initial support for kernel 3.10
...
SVN-Revision: 37287
2013-07-14 13:44:45 +00:00
3bc90a4d23
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
SVN-Revision: 37286
2013-07-14 13:19:58 +00:00
17bbc92882
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 ( #13848 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37285
2013-07-14 13:10:22 +00:00
ef0b9be95e
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
SVN-Revision: 37284
2013-07-14 12:59:00 +00:00
656d475043
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37283
2013-07-14 12:57:03 +00:00
b95bdc8ab5
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37282
2013-07-14 12:56:58 +00:00
e800436de3
brcm47xx: do not change nvram without user interaction
...
SVN-Revision: 37281
2013-07-14 12:56:42 +00:00
da72edd7cd
kernel: refresh patches for kernel 3.8.13
...
SVN-Revision: 37276
2013-07-13 22:45:56 +00:00
06accca1d7
kernel: update to kernel 3.10.1 and refresh patches
...
SVN-Revision: 37275
2013-07-13 22:45:09 +00:00
e574f75d16
kernel: update to kernel 3.9.10 and refresh patches
...
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
9b9c6facfc
ar71xx: fix ar933x watchdog clock ( #13866 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37273
2013-07-13 22:29:53 +00:00
e041d370a7
brcm47xx: proc gets mounted without this patch
...
SVN-Revision: 37272
2013-07-13 21:42:19 +00:00
8dabd7a26b
brcm47xx: remove obsolete hotplug stuff
...
SVN-Revision: 37271
2013-07-13 20:38:33 +00:00
9e9261a718
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
...
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37268
2013-07-12 13:46:27 +00:00
39531131a9
ar71xx: add carambola2 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37260
2013-07-11 21:16:53 +00:00
93c4359512
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
4932368398
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37255
2013-07-11 20:56:27 +00:00
19e3ec0570
kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37253
2013-07-11 20:56:19 +00:00
f5ae93e941
kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37252
2013-07-11 20:56:15 +00:00
2d854d022c
ar71xx: set priority of ath79_wdt to 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37251
2013-07-11 17:01:08 +00:00
8149689393
ar71xx: fix TPLINK/TPLINKOLD initramfs images typos
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37237
2013-07-10 21:28:34 +00:00
01865ae1cf
brcm2708: drop support for 3.3 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37236
2013-07-10 19:43:11 +00:00
110687b491
brcm2708: package the i2c master driver module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37235
2013-07-10 19:43:07 +00:00
c263d5725b
brcm2708: package the SPI master controller driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37234
2013-07-10 19:43:02 +00:00
7fb9279359
kernel: add a bunch of missing LCD Kconfig options
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37233
2013-07-10 19:42:58 +00:00
f2ff0e9259
brcm2708: package the HW random module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37232
2013-07-10 19:42:53 +00:00
9e40952c92
ar71xx: fix Netgear initramfs images
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37230
2013-07-10 17:18:03 +00:00
399283f875
ar71xx: fix some more issues with initramfs images
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37229
2013-07-10 15:22:47 +00:00
eb2e09c5e9
ar71xx: make implicit alignment in struct pptp_addr explicit to fix ABI breakage caused by the unaligned access hacks patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37223
2013-07-10 11:33:43 +00:00
44d22771ae
brcm2708: update maintainership
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37220
2013-07-09 20:53:13 +00:00
15da5cfcdb
brcm2708: switch to 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37219
2013-07-09 20:53:08 +00:00
de69c9edb0
brcm2708: add support for 3.10 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37218
2013-07-09 20:52:49 +00:00
818d2603ee
kernel: add missing configuration symbols used on ARM platforms
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37217
2013-07-09 20:52:23 +00:00
0b55984e1d
kernel: update PATCHES with a stricter policy
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37216
2013-07-09 20:52:07 +00:00
64dde7d981
ar71xx: add linux 3.10
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37214
2013-07-09 12:52:18 +00:00
4b5c5934e1
kernel: debloat the lzma compress/decompress code some more
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37211
2013-07-09 12:52:04 +00:00
51b1e8577c
kernel: do not accept sysrq characters via serial port
...
many boards have a disconnected TTL level serial which can generate
some garbage that can lead to spurious false sysrq detects.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37210
2013-07-09 12:52:00 +00:00
c183dbc542
kernel: add missing config symbol
...
Should fix buildbot builds of ixp4xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37208
2013-07-09 07:51:09 +00:00
7d4c120557
imx23: add gpio_sysfs support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37207
2013-07-08 23:08:26 +00:00
099188695a
ralink: vlan offloading is causing problems. disable it
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37203
2013-07-08 16:34:52 +00:00
a6091a5c71
ralink: unbreak ralink i2c support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37202
2013-07-08 09:01:57 +00:00
a154693bab
ralink: add i2c-ralink kmod info
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37200
2013-07-08 09:01:47 +00:00
e194a31500
linux: refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37195
2013-07-08 08:40:22 +00:00
e61a77a05c
ar71xx: disable JTAG on TL-WR841N-v8/MR3420v2
...
It also fixes USB Power on MR3420v2.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37194
2013-07-08 08:40:21 +00:00
446a962481
ar71xx: fix partition layout on Netgear WNDAP360
...
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37193
2013-07-08 08:40:20 +00:00
ca02639d17
ar71xx: fix for wrong eth0 mac assignment on Netgear WNDAP360
...
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37192
2013-07-08 08:40:18 +00:00
9de461f202
lantiq: etop enable gbit port0
...
Signed-off-by: Antonios Vamporakis <vamporakis@yahoo.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37191
2013-07-08 07:11:59 +00:00
dbb2feb87d
kernel: disable zisofs and zlib by default, reduces kernel size after lzma by ~10k
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37187
2013-07-06 14:49:24 +00:00
bb0d563919
imx23: fix kernel module dependencies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37181
2013-07-06 14:48:56 +00:00
1a3ad5a037
lantiq: add device tree support for arv4519pw
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
ecfb0c6de6
ar71xx: merge patches [611-*,621-*] into 610-*
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37176
2013-07-04 23:31:39 +00:00
de17203c85
imx23: bump kernel to 3.10
...
- fix BOARDNAME
- add profile for Olinuxino boards
- prep image Makefile for u-boot inclusion, separate out bootlet build
- update kernel config to reflect updated chipidea requirements
- update rtc/watchdog config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37175
2013-07-04 22:25:26 +00:00
2a8630394d
kernel/generic: add missing regulator symbols for 3.10
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37169
2013-07-04 16:58:22 +00:00
1f546910cb
ar71xx: Buffalo WZR-HP-AG300H (600DHP) enable PCI
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37167
2013-07-04 13:45:29 +00:00
2da37a713e
ramips: fix RT-N13U gpio buttons
...
https://dev.openwrt.org/ticket/13795
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37163
2013-07-04 13:31:23 +00:00
541bede918
brcm47xx: fix module insert order
...
https://dev.openwrt.org/ticket/13811
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37161
2013-07-04 13:31:13 +00:00
7b6e3df6ab
ar71xx: $(KDIR_TMP) must be present before starting initramfs build
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37155
2013-07-04 12:48:52 +00:00
fb81a9b5ed
ixp4xx: replace magic number with macros in avila/ixdp425/miccpt PCI routing setup
...
Replace magic number with the appropriate macro in
avila/ixdp425/miccpt PCI routing setup.
Signed-off-by: Tamas TEVESZ <ice@extreme.hu>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37154
2013-07-03 17:51:54 +00:00
cdd6c5b750
ixp4xx: switch to kernel 3.10
...
Fixes network issues at least on NSLU2 (#13801 ).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37153
2013-07-03 17:51:44 +00:00
14b6674b39
lantiq: fix initramfs
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37143
2013-07-03 09:17:15 +00:00
62cb88f502
imx6: make kernel_oldconfig
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37134
2013-07-02 23:08:16 +00:00
c9926f77b4
ar71xx: Buffalo WZR-HP-AG300H (600DHP) change button type
...
switch buttons should be declared as switch so the failsafe shell is not
triggered by accident in procd
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37131
2013-07-02 10:45:32 +00:00
c627ae768e
ar71xx: only invoke Initramfs building when enabled
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37129
2013-07-02 10:43:31 +00:00
fdfbac75c2
lantiq: xrx200_net compile fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37126
2013-07-02 09:34:45 +00:00
87c0c2d81d
ixp4xx: add support for linux 3.10
...
Run tested on a NSLU2.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37124
2013-07-01 18:42:49 +00:00
923a851ccf
kernel: add missing config symbol for 3.10
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37123
2013-07-01 18:42:39 +00:00
460233fa2a
ar71xx: fix initramfs images generation after r37049
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37120
2013-07-01 15:37:25 +00:00
96f8c15a36
kernel: update linux 3.10 to 3.10 final
...
3.10 final is out, so refresh patches and add md5sum.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37116
2013-07-01 13:21:06 +00:00
5986a18c16
ramips: update wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37112
2013-06-30 21:03:48 +00:00
0d9f760f27
kernel: update linux 3.9 to 3.9.8
...
Includes memory allocation fixes as well as several networking fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
6a4e78dca6
brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds
...
- Some fixes for the incorrect GPIO assignment of leds on Huawei HW556.
- Addition of unassigned (LAN) leds which can be found on the back of the device.
Signed-off-by: Angga Reza Fardana <angga@norture.com>
Patchwork: http://patchwork.openwrt.org/patch/3744/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37102
2013-06-30 13:10:08 +00:00
7d1cd9dfab
bcm63xx: Improve CFE version mod patch.
...
Fix "cfe-" string length copy.
Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f.
Add support for Huawei CFE versions ("cfe-vd").
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3766/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37101
2013-06-30 13:10:05 +00:00
6df83c3f89
bcm63xx: enable all SoCs for both subtargets
...
Now that SMP kernels also work on older SoCs, also enable them for SMP.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37100
2013-06-30 13:10:03 +00:00
e7d93889d7
bcm63xx: make smp kernels boot on older SoCs
...
Enhance BMIPS support so SMP kernels work on older chips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37099
2013-06-30 13:10:00 +00:00
66f8f30f47
bcm63xx: update patches
...
Update patches with their upstream versions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37098
2013-06-30 13:09:50 +00:00
124ef95f5f
lantiq: add v3.9 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37089
2013-06-29 18:16:56 +00:00
bfc7007226
lantiq: Add support for loading athxk eeproms through mtd
...
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
fe8ecbd972
lantiq: fix kernel config for DEU support
...
Trying to load the DEU modules results in unresolved symbols. This
provides them. This requires the previous patch to be applied first.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 37086
2013-06-29 16:33:37 +00:00
b4f36358ff
lantiq: make xrx200 network driver use a tasklet for rx housekeeping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37085
2013-06-29 16:33:28 +00:00
aff84655f5
lantiq: remove 3.7 kernel patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37084
2013-06-29 16:33:18 +00:00
6875316646
ramips: unbreak initramfs generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37080
2013-06-29 08:41:03 +00:00
8ea5e19823
targets: fix remaining targets for initramfs builds
...
Fix some bugs that slipped through while making initramfs non exclusive.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37079
2013-06-28 22:56:34 +00:00
7acb84dde7
kernel: add global menuconfig option to enable kexec support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37073
2013-06-28 11:27:20 +00:00
900f78e3be
orion: disable normal router support for the harddisk subtarget
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37069
2013-06-28 11:27:06 +00:00
059003fa90
orion: disable CONFIG_VM_EVENT_COUNTERS by default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37068
2013-06-28 11:27:02 +00:00
84ad1782f9
orion: dynamically generate /etc/config/network, the LaCie 2big Network does not use DSA
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37061
2013-06-28 11:26:37 +00:00
6d6296e214
orion: add support for the lacie 2big network device
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37059
2013-06-28 11:26:29 +00:00
77b9fd52a6
ramips: fix ethernet driver
...
make sure the driver does not crash under load
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37058
2013-06-28 11:22:11 +00:00
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
36209234ab
ramips: fix rt2x00 ethernet compile bug
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37043
2013-06-27 16:45:40 +00:00
0d4e00c337
ramips: add missing symbols to rt288x config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37042
2013-06-27 16:45:26 +00:00
1706c8d29a
ramips: fix ethernet stability issue introduced by recent kernel upgrade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37041
2013-06-27 16:28:06 +00:00
e5c7a93d71
imx23: add new target for i.MX233-based boards
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37038
2013-06-27 10:12:03 +00:00
41ad05299c
kernel/generic: add missing regulator symbols for 3.9
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37036
2013-06-26 21:48:17 +00:00
9a077f70de
bcm63xx: fix DSL-274xB F1 default network config
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37032
2013-06-24 20:35:54 +00:00
5063f712a6
ramips: move ESW reset to preinit on RT305x/RT5350
...
RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet
interface, otherwise the driver will panic.
As we already init the ethernet in preinit we therefor need to reset the switch
before that.
Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 37027
2013-06-24 12:39:28 +00:00
d3723f93c6
ramips: make rt3883 usb work properly
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37024
2013-06-24 12:06:56 +00:00
dca18caa79
ramips: revert gpio regulator dts update
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37021
2013-06-24 11:09:50 +00:00
55fb6f3a05
ralink: update patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37016
2013-06-23 15:50:49 +00:00
3df61e8279
kernel: fix a reference counting bug in overlayfs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37014
2013-06-22 14:00:12 +00:00
44b1688e6c
lantiq: Tune the XWAY subtarget cflags
...
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
5d441ae7ea
lantiq: set mips16 support.
...
Set mips16 support in XWAY subtarget.
This patch is based in changeset #36600
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
81c57ec131
lantiq: Fix ARV7518 DTS definitions
...
Fix EBU leds by removing req2 and gnt2 from pinmux.
Fix rfkill button gpio.
Enable reset button.
Fix power led activation status.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 37004
2013-06-21 16:54:03 +00:00
67f5f188b1
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
e6ef318802
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
39df8d1a45
brcm47xx: dont manually insmod switch drivers
...
Signed-off-by: John Crispin <bloic@openwrt.org>
SVN-Revision: 36993
2013-06-21 16:53:15 +00:00
2be717560a
ar71xx: drop procd_init console hack
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36992
2013-06-21 16:53:11 +00:00
c228ed04a1
increase kernel partition size to fix boot issues
...
SVN-Revision: 36982
2013-06-21 10:57:05 +00:00
4ef56823e0
brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
...
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36979
2013-06-20 18:47:36 +00:00
2a5e1910d5
linux-3.8: backport a leds-gpio.c crash fix ( fixes #13721 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36968
2013-06-18 22:23:38 +00:00
28535aad38
brcm63xx: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36958
2013-06-18 10:54:28 +00:00
a9d4bdee43
brcm63xx: provide a default sane MAC address for Cable Modem devices
...
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36957
2013-06-18 10:54:24 +00:00
8ae2b1155d
brcm63xx: create initramfs HCS images
...
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
0ce75bc440
brcm63xx: simplify HCS image creation
...
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36949
2013-06-17 19:32:56 +00:00
78a66975d6
brcm63xx: remove support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36948
2013-06-17 19:32:47 +00:00
d2894412d8
brcm63xx: switch to 3.9 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36947
2013-06-17 19:32:42 +00:00
f03bbaf065
brcm63xx: fix missing antislash in BCM6345 ethernet patch
...
This would cause build failure when disabling support for particular
CPUs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36946
2013-06-17 19:32:35 +00:00
d3a7b5633c
kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override ( #13702 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36937
2013-06-15 11:50:50 +00:00
9492d445de
brcm47xx: run make kernel_oldconfig for 3.9 kernel config
...
SVN-Revision: 36928
2013-06-12 14:51:50 +00:00
87f994d16d
brcm47xx: remove support for kernel 3.6
...
SVN-Revision: 36927
2013-06-12 14:48:45 +00:00
990423f3ef
brcm47xx: add initial support for kernel 3.9
...
SVN-Revision: 36926
2013-06-12 14:47:53 +00:00
46d199d1e8
linux: add ipv6 failed-policy routing action (by Jonas Gorski)
...
SVN-Revision: 36911
2013-06-11 09:27:53 +00:00
76c79f50d7
lantiq: Fixes to athxk EEPROM loading
...
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36901
2013-06-10 08:25:12 +00:00
7638caf35d
lantiq: make kernel_oldconfig
...
Seems the existing kernel config for 3.8 was cp'ed from 3.7; this patch
is the result of "make kernel_oldconfig" with defaults for new options.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36900
2013-06-10 08:25:07 +00:00
f7daed8b9a
lantiq: diag.sh with both red and green power LEDs
...
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36899
2013-06-10 08:25:02 +00:00
fc9532aeaa
ramips: add HAME MPR-A2 support
...
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2
Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>
SVN-Revision: 36898
2013-06-10 08:24:56 +00:00
30786d2dd0
ramips: add support for belkin F7C027 wemo/homeautomatisation plug
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 36897
2013-06-10 08:24:50 +00:00
da7590cd21
lantiq: fix formating in .dts files
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
ab529a529b
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
1ace51360f
kernel/generic: add a few missing kernel config symbols
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36878
2013-06-07 13:42:39 +00:00
2b9d084af9
brcm63xx: add user-space support for Netgear CVG834G
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36877
2013-06-06 22:22:20 +00:00
42e69f45c7
brcm63xx: add kernel space and image support for the Netgear CVG834G
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36876
2013-06-06 22:22:14 +00:00
966d47989b
brcm63xx: add Broadcom cable modem firmware format header
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36875
2013-06-06 22:22:09 +00:00
600b59642e
brcm63xx: add support for BCM3368
...
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36874
2013-06-06 22:21:58 +00:00
1beaf031d1
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
dd9a24663b
omap24xx: convert to use the new jffs2_nand
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36862
2013-06-05 20:58:55 +00:00
e7b504ce8e
kirkwood: convert to use the new jffs2_nand
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36861
2013-06-05 20:58:53 +00:00
9f7ef8d5f0
target: split jffs2 NAND out of jffs2
...
Make jffs2_nand a separate option so this can be triggered without forcing
jffs2 images for nor targets.
Adds a new NAND_BLOCKSIZE variable that allows setting the generated layout
in <page_size>:<block_size> pairs.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36860
2013-06-05 20:58:03 +00:00
799bdc990a
there's no reason to have these generic files in the bin dir either
...
SVN-Revision: 36852
2013-06-05 06:46:41 +00:00
28e8b8dc05
only copy uImages to the bin dir on ramdisk builds
...
SVN-Revision: 36851
2013-06-05 06:17:12 +00:00
e161581d45
don't copy the zImages to the bin dir, factory u-boots can't use them
...
SVN-Revision: 36850
2013-06-05 06:04:48 +00:00
5bb2e8030d
ar71xx: add support for WIFI button on tp-link tl-mr3220v2
...
The TP-LINK TL-MR3220 v2 has a button on the left side
labeled "WIFI". This is GPIO 24. This patch adds the
support for this button.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36848
2013-06-04 13:25:54 +00:00
d187e3c32e
generic: add port mirroring/monitoring capability to rtl8366rb switch
...
This patch adds swlib attributes to the RTL8366RB switch/PHY found in the
TL-WR1043ND router that allow to mirror ethernet packets to a monitor port.
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36847
2013-06-04 13:25:52 +00:00
a0e412a616
versioned files and dirs still make no sense when you support only a single kernel...
...
SVN-Revision: 36836
2013-06-04 11:29:01 +00:00
3a56df33ad
refresh patches
...
SVN-Revision: 36835
2013-06-04 11:24:42 +00:00
8170c9cfb0
add some more symbols
...
SVN-Revision: 36834
2013-06-04 11:23:27 +00:00
812bb43a47
move DT2 related kernel options into the harddist subtarget
...
SVN-Revision: 36833
2013-06-04 11:19:41 +00:00
58fa46c90c
drop support for the dns323
...
SVN-Revision: 36832
2013-06-04 11:13:18 +00:00
e9ef65175d
lantiq: revert [36779] as it caused a regression
...
submitter was informed of a endinaess swap regression and replied with "works on my board"
revert the patch and make arv7518 wifi work again
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36807
2013-05-31 13:25:07 +00:00
da66ea52ec
ar71xx: register USB port for RB2011U* devices
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36801
2013-05-30 17:38:31 +00:00
23bcceb058
ar71xx: create a separated network interface for the RB2011UAS SFP port
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36800
2013-05-30 17:38:30 +00:00
151dca0935
ar71xx: make the SFP port usable on RB2011*S boards
...
The port 6 of the switch is connected to the SFP
cage on the RB2011*S boards. Add a helper function
to correctly initialize the switch configuration
data on those boards to make the SFP port usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36799
2013-05-30 17:38:28 +00:00
a1f91282b4
generic: ar8216: allow to specify SGMII config via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36798
2013-05-30 17:38:26 +00:00
c170d3c3e4
generic: ar8216: add get_port_link callback
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36797
2013-05-30 17:38:22 +00:00
3467b17e69
ar71xx: rb2011: add switch led control values
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36796
2013-05-30 17:38:21 +00:00
4cf6e53ccc
ar71xx: rb2011: update RGMII RX/TX delay values
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36795
2013-05-30 17:38:20 +00:00
6da63a8793
ar71xx: rb2011: move NAND nCE init to rb2011_nand_init
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36794
2013-05-30 17:38:17 +00:00
50c59c4797
ar71xx: add user-space support for RB2011UAS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36793
2013-05-30 17:38:15 +00:00
d6554bf66a
ar71xx: add kernel support for the RB2011UAS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36792
2013-05-30 17:38:13 +00:00
8e56b1e742
generic: ar8216: show chip revision in the kernel log
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36791
2013-05-30 16:25:14 +00:00
d19dae6e2d
ar71xx: add profile and build image for the Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36790
2013-05-30 16:23:10 +00:00
35b5b38316
ar71xx: add user-space support for TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36789
2013-05-30 16:23:09 +00:00
91d7c3efc1
ar71xx: add kernel support for the TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36788
2013-05-30 16:23:07 +00:00
f02765086d
ar71xx: add USB workarounds for AR934x/QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36787
2013-05-30 16:23:06 +00:00
6ff976a87a
ar71xx: add profile and build image for the DIR-601-B1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36786
2013-05-30 16:19:30 +00:00
424c4c0b0a
ar71xx: allow to build CameoHornet images for multiple regions
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36785
2013-05-30 16:19:29 +00:00
184dd34b6d
ar71xx: allow to override fw version in CameoHornet profile
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36784
2013-05-30 16:19:28 +00:00
e60cb01c45
lantiq: ARV752DPW: fix reboot loop caused by wrong GPIO setting
...
The GPIO buttons of ARV752DPW are active low.
Treating them as active high caused a reboot loop as a reset-button
press is detected by gpio-button-hotplug/gpio-keys-polled on startup.
This fixes: https://dev.openwrt.org/ticket/12642
Signed-off-by: Rafael Gieschke <rafael@gieschke.de>
SVN-Revision: 36783
2013-05-30 16:01:06 +00:00
c2b1e9eeef
lantiq: Fix ar8216 switch configuration
...
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
090a75447b
lantiq: DGN3500 support
...
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
a9968d9cb8
lantiq: enable retrieving kernel args from bootloader
...
This patch is a device tree enhancement that IMHO is worthy of mainline.
It allows the bootloader's commandline to be preserved even when the
device tree specifies one.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36780
2013-05-30 16:00:42 +00:00
d1f3751d05
lantiq: wifi calibration from MTD
...
This patch enables retrieving the wifi calibration data from an MTD
partition. It requires the previous patch.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36779
2013-05-30 16:00:32 +00:00
83c3cd4ed9
lantiq: postpone PCI and wifi init
...
This postpones the initialization of PCI and wifi until after the MTD
initialization, so that calibration data may be loaded from there.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36778
2013-05-30 16:00:24 +00:00
b585923cc9
lantiq: fix LED-handling oversights
...
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
1756047518
ramips: set correct description for rt305x subtarget
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36775
2013-05-30 15:59:56 +00:00
4b21af4268
imx6: add new target
...
SVN-Revision: 36753
2013-05-29 01:27:29 +00:00
846e3d40a0
kernel: generic: remove upstream patches for 3.10-rc3 and refresh patches
...
SVN-Revision: 36752
2013-05-29 01:27:27 +00:00
c4d0a49348
ar71xx: typo in detect TL-MR10U/TL-MR11U
...
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36727
2013-05-26 16:38:00 +00:00
cc7bedf8a3
ar71xx: fix TL-MR10U usb power
...
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36726
2013-05-26 16:37:59 +00:00
7d2182c455
kernel: update linux 3.9 to 3.9.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36725
2013-05-26 16:02:34 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
93ce462b7e
ar71xx: set eth0 mac address to match bottom label of the OM2P LC
...
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36723
2013-05-26 16:02:29 +00:00
0842478e44
ar71xx: add TP-LINK TL-MR10U
...
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36722
2013-05-26 16:02:26 +00:00
0998065a53
generic: ar8216: add port mirroring
...
Tested on Buffalo WZR-600DHP with ar8316 switch. Commands used to mirror both
RX and TX traffic from LAN port 1 to LAN port 4:
$ swconfig dev switch0 set enable_mirror_rx 1
$ swconfig dev switch0 set enable_mirror_tx 1
$ swconfig dev switch0 set mirror_monitor_port 4
$ swconfig dev switch0 set mirror_source_port 1
Signed-off-by: Colin Leitner <colin.leitner@googlemail.com>
Tested-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36713
2013-05-24 13:10:22 +00:00
fe7e52e4a4
ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36679
2013-05-21 09:45:46 +00:00
a01be4a217
kernel: update 3.9 to 3.9.3
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36676
2013-05-20 16:57:00 +00:00
3ac261cd21
ar7: drop obsolete 3.3 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36674
2013-05-20 12:42:44 +00:00
334e6d4e0c
ar7: drop obsolete 3.6 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36673
2013-05-20 12:42:41 +00:00
49c81c6e00
ar7: switch to 3.9
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36672
2013-05-20 12:42:38 +00:00
c4b943c82c
ar7: add support for 3.9
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36671
2013-05-20 12:42:36 +00:00
4d0fcd0c49
kernel: add some missing symbols/move them to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36670
2013-05-20 12:42:32 +00:00
b751b5893c
brcm2708: make it boot on revision 2 raspberry pis
...
* update the bootcode.bin to the newest version
- gpu/cpu mem split is now configured through config.txt, so no need
to create more than one sd card image (just edit the config.txt)
- bootcode.bin now supports the never revision 2 raspberry pis
* add a commented prepopulated config.txt for easier config changes
Taken from <https://github.com/Evilpaul/RPi-config >
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36668
2013-05-20 12:07:03 +00:00
c0435a971e
kernel: generic: add 3.10-rc1 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36663
2013-05-19 18:36:15 +00:00
0a62b7c148
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
2013-05-19 18:32:13 +00:00
1f4e5f77a0
bcm63xx: Simplify CFE detection.
...
Check bootloader argument in mtd.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36659
2013-05-19 18:32:02 +00:00
6e2b85b401
kernel: update 3.9 to 3.9.2
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36658
2013-05-19 18:31:51 +00:00
668604f91d
kernel: don't remove of_tables
...
These are needed for OF setup of clocksource, clocks and irqchips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36657
2013-05-19 11:27:28 +00:00
56478636aa
ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36646
2013-05-17 07:31:00 +00:00
144cfb65a4
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36631
2013-05-13 19:13:33 +00:00
2c5a5d8736
kernel: add missing PHY ID for an AR8327 switch variant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36630
2013-05-13 19:13:27 +00:00
Hauke Mehrtens
Felix Fietkau
John Crispin
Florian Fainelli
Jonas Gorski
Zoltan Herpai
Gabor Juhos
Luka Perkov
Imre Kaloz
Steven Barth