hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
24,832 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

10596 Commits (0a6e0228d9a41299968dac2d8f7f106b45e390b9)

Author SHA1 Message Date
Zoltan Herpai 0a6e0228d9 imx23: add SoC sound support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 37622
 2013-07-31 09:52:46 +00:00
Felix Fietkau 28d03a9983 kernel: update remaning platforms accidentally left out of r37617 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37619
 2013-07-30 08:00:25 +00:00
Felix Fietkau 8f04792531 kernel: update to linux 3.10.4, refresh patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37617
 2013-07-29 22:42:22 +00:00
John Crispin 336c94c32d lantiq: setup gphy leds on TPlink TDW8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37612
 2013-07-29 13:10:42 +00:00
John Crispin c3b5ee96b9 lantiq: add gphy pinmux definitions 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37611
 2013-07-29 13:10:37 +00:00
John Crispin 61e6be686f lantiq: set sane default for phy leds 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37610
 2013-07-29 13:10:32 +00:00
John Crispin c2600d13d1 ramips: fix indenting of spi partitions inside dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37609
 2013-07-29 13:10:26 +00:00
Felix Fietkau 99e3616dac kernel: add missing config symbols for 3.10 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37602
 2013-07-29 12:48:57 +00:00
Felix Fietkau 73c4d73d6d build: unify target independent optimization options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
 2013-07-29 09:38:29 +00:00
Felix Fietkau cc26f768e4 kernel: stop patching -funit-at-a-time into CFLAGS, it has no effect on recent compilers 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37598
 2013-07-29 09:38:21 +00:00
Hauke Mehrtens ad59c4e646 bcm53xx: compile b53 switch driver 
SVN-Revision: 37587
 2013-07-28 22:14:55 +00:00
Hauke Mehrtens 1377916ea7 bcm53xx: update patches 
This reorders the patchs and adds some new ones.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37586
 2013-07-28 22:13:52 +00:00
Hauke Mehrtens 333252e493 bcm53xx: use clocksource patch as it was committed upstream 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37585
 2013-07-28 21:22:50 +00:00
Hauke Mehrtens 3e8c39f239 bcm53xx: add initial bgmac patches 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37584
 2013-07-28 21:20:15 +00:00
Hauke Mehrtens 24628e4ce7 bcm53xx: activate pci and usb in kernel config 
This is not working, just compiling

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37583
 2013-07-28 21:10:42 +00:00
Luka Perkov d6a23e1ae9 imx6: update default packages 
SVN-Revision: 37582
 2013-07-28 20:34:21 +00:00
Luka Perkov a08eab3ce8 imx6: add support for EHCI USB 
SVN-Revision: 37581
 2013-07-28 20:34:19 +00:00
Gabor Juhos 65584ed54f ar71xx: add profile and build image for the WNR612 v2 board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37577
 2013-07-28 10:23:38 +00:00
Gabor Juhos 41d136f2c8 ar71xx: add user-space support for the WNR612 v2 board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37576
 2013-07-28 10:23:37 +00:00
Gabor Juhos 6d8163505e ar71xx: add kernel support for the Netgear WNR612 v2 board 
Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37575
 2013-07-28 10:23:36 +00:00
Gabor Juhos ede1587ed8 ar71xx: add profile and build image for the TL-WR710N board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37574
 2013-07-28 10:23:34 +00:00
Gabor Juhos 5f5257e234 ar71xx: add user-space support for the TL-WR710N board 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37573
 2013-07-28 10:23:33 +00:00
Gabor Juhos c5029c2ebf ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board 
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.

See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/

[juhosg: use a separate kernel patch]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37572
 2013-07-28 10:23:32 +00:00
Gabor Juhos af1dd57a37 ar71xx: build image for the MERCURY MW4530R board 
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37571
 2013-07-28 10:23:31 +00:00
Gabor Juhos 8b6f392b72 ar71xx: add model detection for the MERCURY MW4530R board 
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.

Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37570
 2013-07-28 10:23:29 +00:00
Gabor Juhos b49dc036e8 ar71xx: TEW632BRP has buttons 'active low', fix board config 
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).

Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.

Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.

This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37569
 2013-07-28 10:23:22 +00:00
John Crispin 8dd30fa775 ramips: add MPR-A1 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37568
 2013-07-27 09:23:52 +00:00
John Crispin 13b7ab81cf ralink: gpio driver should not set gpio to input when irq is querired 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37567
 2013-07-27 09:23:45 +00:00
John Crispin eb089abd28 ramips: add back dwc_otg driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37566
 2013-07-27 09:23:40 +00:00
John Crispin 718b47f0b4 ramips: MPR-A2 should use memory auto detection 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37565
 2013-07-27 09:23:34 +00:00
John Crispin 115c6f85cf ramips: enable usb phy support on rt5350 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37564
 2013-07-27 09:23:29 +00:00
John Crispin f4c4ca0b00 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37563
 2013-07-27 09:23:24 +00:00
John Crispin 4176b6fdd3 strict_strtoul is obsolete, use kstrtoul instead 
based on http://patchwork.openwrt.org/patch/3827/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37562
 2013-07-27 09:23:18 +00:00
John Crispin c4413b6e08 ramips: unbreak asiarf dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37561
 2013-07-26 15:19:19 +00:00
Gabor Juhos f093cda481 ar71xx: add profile and fixup image generation for the TL-MR10U board 
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.

Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37550
 2013-07-26 07:32:01 +00:00
Gabor Juhos f4d5ecdb9f ar71xx: add user-space support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37548
 2013-07-26 07:31:59 +00:00
Gabor Juhos ec7fe3fab7 ar71xx: add kernel support for the TL-MR10U board 
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37547
 2013-07-26 07:31:57 +00:00
Gabor Juhos e9688455f6 kernel: update 3.10 to 3.10.3 
Also refresh 3.10 patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37546
 2013-07-26 07:19:58 +00:00
John Crispin bfe65eaf7a lantiq: remove stale phy register setup properties from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37544
 2013-07-25 20:54:51 +00:00
John Crispin 54b4074074 lantiq: add TP-Link TDW8970 image generation 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37543
 2013-07-25 20:29:24 +00:00
John Crispin a2c5540727 lantiq: add profile for TP-Link TDW8970 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
 2013-07-25 20:29:20 +00:00
John Crispin a99042c6a4 lantiq: add devicetree for TP-Link TDW8970 
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37541
 2013-07-25 20:29:15 +00:00
John Crispin 313636c1e4 lantiq: fix initramfs image generation for lzmaloader based images 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37540
 2013-07-25 20:29:10 +00:00
John Crispin a4d31c0353 lantiq: make macs loadable from mtd partitions 
This is a really ugly hack but it will have to do until we copy the ramips patches to the lantiq tree

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37539
 2013-07-25 20:29:05 +00:00
John Crispin 32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
 2013-07-25 20:29:01 +00:00
John Crispin 4036be4408 lantiq: update pcie driver 
This is an intermediate commit until the new OF driver is functional.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37537
 2013-07-25 20:28:56 +00:00
Lars-Peter Clausen dee22d069f xburst: Add missing kernel config symbol 
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 37534
 2013-07-25 18:39:34 +00:00
John Crispin 04aaf7a03e ramips: disable hg255d 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37532
 2013-07-25 17:03:08 +00:00
John Crispin 7feebeb193 ramipe: disable HG255D support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37531
 2013-07-25 16:55:48 +00:00
John Crispin 9b2c7be0c4 ramips: important patch for HG255D 
r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!!

This patch shrink firmware part in mtd layout to exclude origin factory part, and  I will prepare another patch to fix the eeprom extract issue for box with origin u-boot.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

SVN-Revision: 37530
 2013-07-25 16:01:58 +00:00