4cda88a879
hostapd: fix typo in version number
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37742
2013-08-08 20:45:15 +00:00
9df75e7f34
hostapd: fix ubus reconnect handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37741
2013-08-08 20:45:12 +00:00
368e7da483
ubus: update to latest version, fixes a bug in reconnect after ubusd dies
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37740
2013-08-08 20:45:09 +00:00
750197b3af
hostapd: add a build variant for wpa_supplicant with p2p (aka Wi-Fi Direct) support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37739
2013-08-08 16:24:50 +00:00
f53b96813e
hostapd: update to latest version (20130707)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37738
2013-08-08 16:04:19 +00:00
73a584f912
include: cmake: pass toolchain directory to default root find path as well
...
SVN-Revision: 37737
2013-08-07 13:54:51 +00:00
9a22315ca4
hostapd: Settings for DAE/CoA server
...
hostapd supports "Dynamic Authorization Extensions", making it possible
to forcibly disconnect a user by sending it a RADIUS "Disconnect-Request"
packet.
I've added three new variables to enable setting of the
"radius_das_client" and "radius_das_port" variables in the hostapd
configuration, which enable these extensions.
* dae_client - IP of the client that can send disconnect requests
* dae_secret - shared secret for DAE packets
These are combined into the "radius_das_client" option in hostapd.conf
To enable the server, both dae_client and dae_secret must be set.
* dae_port - optional, default value is 3799 as specified in RFC 5176
Signed-off-by: Martijn van de Streek <martijn@vandestreek.net>
SVN-Revision: 37734
2013-08-06 18:55:30 +00:00
91f0b411f4
hostapd: Fix WDS/WEP usage
...
WEP in WDS is currently broken in hostapd. Add a patch
to fix the issue.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37733
2013-08-06 17:59:12 +00:00
39ab281fae
mac80211: Handle concurrent AP/STA beaconing properly
...
Use the "start_disabled" option in hostapd that was added
in the earlier patch.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37732
2013-08-06 17:59:09 +00:00
76ca564e79
hostapd: Refresh patches
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37731
2013-08-06 17:59:05 +00:00
22e012bad8
hostapd: Add an option to disable beaconing
...
Add a patch for hostapd that introduces a config option
"start_disabled" which can be used to bring up an AP
interface with beaconing disabled. This is useful in
a Repeater-AP setup where the Repeater AP has to start
beaconing only after the WDS link has been established.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37730
2013-08-06 17:59:02 +00:00
94666dad1c
lantiq: fix TD-W8970 image generation to work with the new tool
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37727
2013-08-06 16:25:45 +00:00
15721d535b
firmware-utils: add a tool TP-Link v2 image generation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37726
2013-08-06 16:25:35 +00:00
1af56d7c46
firmware-utils: remove v2 support
...
we will use gabors patch instead
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37725
2013-08-06 16:25:24 +00:00
815d9334e2
firmware-utils: fix segfault introduced by v2 changes
...
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 37724
2013-08-06 14:32:50 +00:00
f835cb6cc4
ar71xx: remove duplicate dir505 entry from board detection code
...
https://dev.openwrt.org/ticket/14006
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37723
2013-08-06 14:12:02 +00:00
d13cbb04ad
lantiq: add support for tplink images to .../image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37722
2013-08-06 12:31:25 +00:00
5001afdc37
lantiq: make the split patch recognize the tplink header
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37721
2013-08-06 12:31:20 +00:00
7f2eaac407
lantiq: fix TDW8970.dts commandline and partition name
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37720
2013-08-06 12:31:16 +00:00
e993e0c2cf
lantiq: add tplink header id to sysupgrade and fix a comment
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37719
2013-08-06 12:31:10 +00:00
eb844ad321
firmware-utils: add support for TDW8970 to mktplinkfw
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37718
2013-08-06 12:31:06 +00:00
85cb2c4f9e
firmware-utils: add v2 header support to firmware-utils
...
only image build works. inspect and md5 checksum support are not implemented yet
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37717
2013-08-06 12:30:52 +00:00
bdb2859a48
ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37716
2013-08-06 10:31:10 +00:00
5bce86faa2
mac80211: refresh a patch that was using the wrong patch style
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37715
2013-08-06 10:31:06 +00:00
48b3b74da7
mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37714
2013-08-06 10:31:02 +00:00
592f2c6e2b
ath9k: add some more fixes for the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
2013-08-06 10:30:58 +00:00
27fa640548
lantiq: add (incomplete) support for Aztech GR7000
...
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
3f351e2770
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
d1914b4939
kernel: add some missing config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37710
2013-08-05 20:58:05 +00:00
9d4145efe5
kernel: fix DMA error when BCM4331 is connected to BCM4706
...
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
9257d556c2
ramips: re-implement PCI mux
...
Parallel flash access on RT3662/RT3883 based devices
is broken without that. It was fixed already some time
ago, but that change seems lost somewhere.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37708
2013-08-05 12:49:19 +00:00
c80dd34924
ramips: allow to build Seama firmware images with arbitrary size
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37707
2013-08-05 12:35:22 +00:00
267810f73a
ar71xx: add usb modules to dir 505 profile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37706
2013-08-05 11:08:30 +00:00
c83e665a2c
octeon: add a few missing symbols to the kernel config file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37705
2013-08-05 10:42:09 +00:00
288adb6634
lantiq: several a803 related fixes
...
based on work from Matti Laasko that he posted in the wiki
Signed-off-by: John Crispin <blogic@openwrt.or
SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
553a469728
ar71xx: add support for dir 505 a1
...
this patch is based on ...
-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37703
2013-08-05 10:41:48 +00:00
6743f2625b
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
2013-08-05 10:32:13 +00:00
158cc23d39
ubus: fix typo
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37701
2013-08-05 10:08:04 +00:00
e7de3b26ed
ubus: change section/category to base, libs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37700
2013-08-05 10:07:33 +00:00
259c36358f
mac80211: fix rt2x00 dependency
...
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
885cf1f19f
mac80211: rt2x00: fix LED polarity patch
...
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
2013-08-05 09:09:41 +00:00
3573494b19
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
...
Closes #13951 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
99a12119ca
ar71xx: fix tl-wa901nd buttons code
...
This patch fixes the code of the buttons for TP-Link WA901ND.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37696
2013-08-05 09:09:39 +00:00
ccec78beaa
ar71xx: ubnt unifi outdoor register gpio button
...
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37695
2013-08-05 09:09:37 +00:00
f0b5e7d419
x86: change /dev/console to tty to fix job control
...
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).
This patch switches /dev/console to tty devices for ash on x86 generic target.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 37693
2013-08-04 17:05:33 +00:00
c7976ae5f8
mac80211: add rtlwifi drivers
...
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
f5b9555cdc
imx6: sync usb chipidea with upstream
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37686
2013-08-04 14:20:15 +00:00
db083a41cf
generic: make the module reloc pacth work on mips64
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37685
2013-08-04 13:54:42 +00:00
3a2040ffee
octeon: add support for the octeon mips64 SoC
...
This is the SoC used be the ESR Lite made by ubnt.com
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37684
2013-08-04 13:54:32 +00:00
8a4726bca8
imx6: remove sdma binary
...
SVN-Revision: 37682
2013-08-04 13:28:26 +00:00
Felix Fietkau
Jo-Philipp Wich
John Crispin
Luka Perkov
Hauke Mehrtens
Florian Fainelli
Gabor Juhos
Jonas Gorski