hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for Hak5 Packet Squirrel 

Hak5 Packet Squirrel is a pocket-sized device dedicated for pentesters
(MITM attacks). This device is based on Atheros AR9331 but it lacks
WiFi. Support for it was first introduced in 950b278c81 (ar71xx).

Specifications:

- Atheros AR9331
- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of flash (SPI NOR)
- 2x RJ45 10/100 Mbps Ethernet (AR9331)
- 1x USB 2.0
- 1x RGB LED, 1x button, 1x 4-way mechanical switch
- 1x Micro USB Type-B for main power input

Flash instruction:

You can use sysupgrade image directly in vendor firmware which is based
on OpenWrt/LEDE.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
master
Piotr Dymacz 2020-08-19 15:10:04 +02:00
parent a2f3a58607
commit b33ce8c535
5 changed files with 182 additions and 96 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
target/linux/ath79/dts/ar9331_hak5_lan-turtle.dts
View File

@ -1,9 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9331.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331_hak5_lan-turtle.dtsi"
/ {
model = "Hak5 LAN Turtle";
@ -13,21 +10,6 @@
led-boot = &led_system;
led-failsafe = &led_system;
led-upgrade = &led_system;
serial0 = &uart;
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio11>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
@ -42,79 +24,3 @@
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&pinmux {
enable_gpio11: pinmux_enable_gpio11 {
pinctrl-single,bits = <0x0 0x0 0x4>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xfd0000>;
compatible = "tplink,firmware";
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};

102
target/linux/ath79/dts/ar9331_hak5_lan-turtle.dtsi Normal file
View File

@ -0,0 +1,102 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9331.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
serial0 = &uart;
};
keys: keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&enable_gpio11>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&pinmux {
enable_gpio11: pinmux_enable_gpio11 {
pinctrl-single,bits = <0x0 0x0 0x4>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xfd0000>;
compatible = "tplink,firmware";
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};

64
target/linux/ath79/dts/ar9331_hak5_packet-squirrel.dts Normal file
View File

@ -0,0 +1,64 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9331_hak5_lan-turtle.dtsi"
/ {
model = "Hak5 Packet Squirrel";
compatible = "hak5,packet-squirrel", "qca,ar9331";
aliases {
led-boot = &led_system_green;
led-failsafe = &led_system_green;
led-running = &led_system_green;
led-upgrade = &led_system_green;
};
leds {
compatible = "gpio-leds";
led_system_green: system-green {
label = "packet-squirrel:green:system";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
system-blue {
label = "packet-squirrel:blue:system";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
system-red {
label = "packet-squirrel:red:system";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
};
&keys {
sw1 {
label = "sw1";
linux,code = <BTN_0>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
sw2 {
label = "sw2";
linux,code = <BTN_1>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
sw3 {
label = "sw3";
linux,code = <BTN_2>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
sw4 {
label = "sw4";
linux,code = <BTN_3>;
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};

3
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -503,7 +503,8 @@ ath79_setup_macs()
enterasys,ws-ap3705i)
label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
;;
hak5,lan-turtle)
hak5,lan-turtle|\
hak5,packet-squirrel)
label_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
;;
iodata,etg3-r)

13
target/linux/ath79/image/generic.mk
View File

@ -1032,6 +1032,19 @@ define Device/hak5_lan-turtle
endef
TARGET_DEVICES += hak5_lan-turtle
define Device/hak5_packet-squirrel
$(Device/tplink-16mlzma)
SOC := ar9331
DEVICE_VENDOR := Hak5
DEVICE_MODEL := Packet Squirrel
TPLINK_HWID := 0x5351524c
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := kmod-usb-chipidea2 -iwinfo -kmod-ath9k -swconfig \
-uboot-envtools -wpad-basic-wolfssl
SUPPORTED_DEVICES += packet-squirrel
endef
TARGET_DEVICES += hak5_packet-squirrel
define Device/iodata_etg3-r
SOC := ar9342
DEVICE_VENDOR := I-O DATA