hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ar71xx: add support for AR9331 based Hak5 devices 

This adds support for AR9331 based Hak5 penetration testing tools:

- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel

WiFi Pineapple NANO specifications:

- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button

LAN Turtle specifications:

- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)

Packet Squirrel specifications:

- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch

Flash instructions for all 3 devices:

Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.

Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
openwrt-18.06
Sebastian Kinne 2018-02-13 13:26:33 +11:00 committed by Piotr Dymacz
parent 2ea98fc39b
commit 950b278c81
14 changed files with 380 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ar71xx/base-files/etc/board.d/01_leds
View File

@ -405,6 +405,9 @@ hornet-ub-x2)
ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
lan-turtle)
ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1"
;;
mc-mac1200r)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt"
@ -951,6 +954,9 @@ whr-hp-gn)
ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
;;
wifi-pineapple-nano)
ucidef_set_led_wlan "wlan0" "WLAN0" "$board:blue:system" "phy0tpt"
;;
wlae-ag300n)
ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
;;

1
target/linux/ar71xx/base-files/etc/board.d/02_network
View File

@ -140,6 +140,7 @@ ar71xx_setup_interfaces()
unifi|\
unifiac-lite|\
wi2a-ac200i|\
wifi-pineapple-nano|\
wndap360|\
wp543)
ucidef_set_interface_lan "eth0"

7
target/linux/ar71xx/base-files/etc/diag.sh
View File

@ -27,6 +27,7 @@ get_status_led() {
e600gac-v2|\
eap120|\
minibox-v1|\
packet-squirrel|\
som9331|\
sr3200|\
tl-wr802n-v2|\
@ -203,7 +204,8 @@ get_status_led() {
r36a)
status_led="$board:blue:status"
;;
e600g-v2)
e600g-v2|\
wifi-pineapple-nano)
status_led="$board:blue:system"
;;
eap300v2)
@ -254,6 +256,9 @@ get_status_led() {
jwap230)
status_led="$board:green:led1"
;;
lan-turtle)
status_led="$board:orange:system"
;;
ls-sr71)
status_led="ubnt:green:d22"
;;

9
target/linux/ar71xx/base-files/lib/ar71xx.sh
View File

@ -741,6 +741,9 @@ ar71xx_board_detect() {
*"JWAP230")
name="jwap230"
;;
*"LAN Turtle")
name="lan-turtle"
;;
*"Lima"*)
name="lima"
;;
@ -865,6 +868,9 @@ ar71xx_board_detect() {
*"Oolite V1.0")
name="oolite"
;;
*"Packet Squirrel")
name="packet-squirrel"
;;
*"PB42")
name="pb42"
;;
@ -1327,6 +1333,9 @@ ar71xx_board_detect() {
*"WHR-HP-GN")
name="whr-hp-gn"
;;
*"WiFi Pineapple NANO")
name="wifi-pineapple-nano"
;;
*"WLAE-AG300N")
name="wlae-ag300n"
;;

5
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View File

@ -392,12 +392,14 @@ platform_check_image() {
el-m150|\
el-mini|\
gl-inet|\
lan-turtle|\
mc-mac1200r|\
minibox-v1|\
omy-g1|\
omy-x1|\
onion-omega|\
oolite|\
packet-squirrel|\
re355|\
re450|\
rut900|\
@ -466,7 +468,8 @@ platform_check_image() {
tl-wr940n-v4|\
tl-wr941nd|\
tl-wr941nd-v5|\
tl-wr941nd-v6)
tl-wr941nd-v6|\
wifi-pineapple-nano)
local magic_ver="0100"
case "$board" in

2
target/linux/ar71xx/config-4.4
View File

@ -131,6 +131,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_JA76PF is not set
# CONFIG_ATH79_MACH_JWAP003 is not set
# CONFIG_ATH79_MACH_JWAP230 is not set
# CONFIG_ATH79_MACH_LAN_TURTLE is not set
# CONFIG_ATH79_MACH_LIMA is not set
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
# CONFIG_ATH79_MACH_MR12 is not set
@ -239,6 +240,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WLR8100 is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set

2
target/linux/ar71xx/config-4.9
View File

@ -129,6 +129,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_JA76PF is not set
# CONFIG_ATH79_MACH_JWAP003 is not set
# CONFIG_ATH79_MACH_JWAP230 is not set
# CONFIG_ATH79_MACH_LAN_TURTLE is not set
# CONFIG_ATH79_MACH_LIMA is not set
# CONFIG_ATH79_MACH_MC_MAC1200R is not set
# CONFIG_ATH79_MACH_MR12 is not set
@ -237,6 +238,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_WEIO is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WLR8100 is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set

19
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@ -958,6 +958,16 @@ config ATH79_MACH_WAM250
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_WIFI_PINEAPPLE_NANO
bool "Hak5 WiFi Pineapple NANO support"
select SOC_AR933X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X
@ -2154,6 +2164,15 @@ config ATH79_MACH_CARAMBOLA2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_LAN_TURTLE
bool "Hak5 LAN Turtle and Packet Squirrel support"
select SOC_AR933X
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
config ATH79_MACH_LIMA
bool "8devices Lima board"
select SOC_QCA953X

2
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View File

@ -139,6 +139,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o
obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
@ -246,6 +247,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
obj-$(CONFIG_ATH79_MACH_WAM250) += mach-wam250.o
obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
obj-$(CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO) += mach-wifi-pineapple-nano.o
obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o

178
target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c Normal file
View File

@ -0,0 +1,178 @@
/*
* Hak5 LAN Turtle and Packet Squirrel boards support
*
* Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#define LAN_TURTLE_GPIO_BTN_RESET 11
#define LAN_TURTLE_GPIO_LED_SYS 13
#define PACKET_SQUIRREL_GPIO_BTN_SW1 18
#define PACKET_SQUIRREL_GPIO_BTN_SW2 20
#define PACKET_SQUIRREL_GPIO_BTN_SW3 21
#define PACKET_SQUIRREL_GPIO_BTN_SW4 24
#define PACKET_SQUIRREL_GPIO_BTN_RESET 11
#define PACKET_SQUIRREL_GPIO_LED_B 23
#define PACKET_SQUIRREL_GPIO_LED_G 22
#define PACKET_SQUIRREL_GPIO_LED_R 19
#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
static const char *hak5_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data hak5_flash_data = {
.part_probes = hak5_part_probes,
};
/* LAN Turtle */
static struct gpio_led lan_turtle_leds_gpio[] __initdata = {
{
.name = "lan-turtle:orange:system",
.gpio = LAN_TURTLE_GPIO_LED_SYS,
.active_low = 1,
},
};
static struct gpio_keys_button lan_turtle_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = LAN_TURTLE_GPIO_BTN_RESET,
.active_low = 1,
},
};
/* Packet Squirrel */
static struct gpio_led packet_squirrel_leds_gpio[] __initdata = {
{
.name = "packet-squirrel:blue:system",
.gpio = PACKET_SQUIRREL_GPIO_LED_B,
.active_low = 1,
}, {
.name = "packet-squirrel:green:system",
.gpio = PACKET_SQUIRREL_GPIO_LED_G,
.active_low = 1,
}, {
.name = "packet-squirrel:red:system",
.gpio = PACKET_SQUIRREL_GPIO_LED_R,
.active_low = 1,
},
};
static struct gpio_keys_button packet_squirrel_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "sw1",
.type = EV_KEY,
.code = BTN_0,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW1,
.active_low = 1,
}, {
.desc = "sw2",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW2,
.active_low = 1,
}, {
.desc = "sw3",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW3,
.active_low = 1,
}, {
.desc = "sw4",
.type = EV_KEY,
.code = BTN_3,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = PACKET_SQUIRREL_GPIO_BTN_SW4,
.active_low = 1,
},
};
static void __init hak5_common_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
ath79_register_m25p80(&hak5_flash_data);
ath79_register_mdio(0, 0x0);
ath79_switch_data.phy_poll_mask = 0xfe;
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_register_eth(0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
ath79_register_eth(1);
ath79_register_usb();
/* GPIO11/12 */
ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
}
static void __init lan_turtle_setup(void)
{
hak5_common_setup();
/* GPIO13 */
ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN);
ath79_register_leds_gpio(-1, ARRAY_SIZE(lan_turtle_leds_gpio),
lan_turtle_leds_gpio);
ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
ARRAY_SIZE(lan_turtle_gpio_keys),
lan_turtle_gpio_keys);
}
static void __init packet_squirrel_setup(void)
{
hak5_common_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(packet_squirrel_leds_gpio),
packet_squirrel_leds_gpio);
ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
ARRAY_SIZE(packet_squirrel_gpio_keys),
packet_squirrel_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_LAN_TURTLE, "LAN-TURTLE",
"Hak5 LAN Turtle", lan_turtle_setup);
MIPS_MACHINE(ATH79_MACH_PACKET_SQUIRREL, "PACKET-SQUIRREL",
"Hak5 Packet Squirrel", packet_squirrel_setup);

107
target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c Normal file
View File

@ -0,0 +1,107 @@
/*
* Hak5 WiFi Pineapple NANO board support
*
* Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM 18
#define WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET 12
#define WIFI_PINEAPPLE_NANO_GPIO_SD_DET 19
#define WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM 20
#define WIFI_PINEAPPLE_NANO_GPIO_USB_POWER 23
#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
#define WIFI_PINEAPPLE_NANO_MAC1_OFFSET 0x0006
#define WIFI_PINEAPPLE_NANO_CALDATA_OFFSET 0x1000
static const char *hak5_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data hak5_flash_data = {
.part_probes = hak5_part_probes,
};
static struct gpio_led wifi_pineapple_nano_leds_gpio[] __initdata = {
{
.name = "wifi-pineapple-nano:blue:system",
.gpio = WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM,
.active_low = 1,
},
};
static struct gpio_keys_button wifi_pineapple_nano_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
.gpio = WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET,
.active_low = 1,
}
};
static void __init wifi_pineapple_nano_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&hak5_flash_data);
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr,
art + WIFI_PINEAPPLE_NANO_MAC1_OFFSET, 0);
ath79_register_eth(0);
/* GPIO11/12 */
ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_SD_DET,
GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
"SD card present");
gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM,
GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
"USB alarm");
gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_POWER,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED |
GPIOF_ACTIVE_LOW, "USB power");
ath79_register_leds_gpio(-1, ARRAY_SIZE(wifi_pineapple_nano_leds_gpio),
wifi_pineapple_nano_leds_gpio);
ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wifi_pineapple_nano_gpio_keys),
wifi_pineapple_nano_gpio_keys);
ath79_register_usb();
ath79_register_wmac(art + WIFI_PINEAPPLE_NANO_CALDATA_OFFSET, NULL);
}
MIPS_MACHINE(ATH79_MACH_WIFI_PINEAPPLE_NANO, "WIFI-PINEAPPLE-NANO",
"Hak5 WiFi Pineapple NANO", wifi_pineapple_nano_setup);

3
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View File

@ -135,6 +135,7 @@ enum ath79_mach_type {
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */
ATH79_MACH_LIMA, /* 8devices Lima */
ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */
ATH79_MACH_MR12, /* Cisco Meraki MR12 */
@ -170,6 +171,7 @@ enum ath79_mach_type {
ATH79_MACH_OMY_G1, /* OMYlink OMY-G1 */
ATH79_MACH_OMY_X1, /* OMYlink OMY-X1 */
ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
ATH79_MACH_PACKET_SQUIRREL, /* Hak5 Packet Squirrel */
ATH79_MACH_PB42, /* Atheros PB42 */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */
@ -323,6 +325,7 @@ enum ath79_mach_type {
ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
ATH79_MACH_WIFI_PINEAPPLE_NANO, /* Hak5 WiFi Pineapple NANO */
ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */
ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */

2
target/linux/ar71xx/generic/config-default
View File

@ -101,6 +101,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_JWAP230=y
CONFIG_ATH79_MACH_LAN_TURTLE=y
CONFIG_ATH79_MACH_LIMA=y
CONFIG_ATH79_MACH_MC_MAC1200R=y
CONFIG_ATH79_MACH_MR12=y
@ -169,6 +170,7 @@ CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_ATH79_MACH_WAM250=y
CONFIG_ATH79_MACH_WEIO=y
CONFIG_ATH79_MACH_WHR_HP_G300N=y
CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO=y
CONFIG_ATH79_MACH_WLAE_AG300N=y
CONFIG_ATH79_MACH_WLR8100=y
CONFIG_ATH79_MACH_WNDAP360=y

39
target/linux/ar71xx/image/generic.mk
View File

@ -484,6 +484,19 @@ define Device/gl-usb150
endef
TARGET_DEVICES += gl-usb150
define Device/lan-turtle
$(Device/tplink-16mlzma)
DEVICE_TITLE := Hak5 LAN Turtle
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
-kmod-ath9k -swconfig -uboot-envtools -wpad-mini
BOARDNAME := LAN-TURTLE
DEVICE_PROFILE := LANTURTLE
TPLINK_HWID := 0x5348334c
CONSOLE := ttyATH0,115200
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += lan-turtle
define Device/lima
DEVICE_TITLE := 8devices Lima
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
@ -656,6 +669,19 @@ define Device/cr5000-nocloud
endef
TARGET_DEVICES += cr5000-nocloud
define Device/packet-squirrel
$(Device/tplink-16mlzma)
DEVICE_TITLE := Hak5 Packet Squirrel
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 \
-kmod-ath9k -swconfig -uboot-envtools -wpad-mini
BOARDNAME := PACKET-SQUIRREL
DEVICE_PROFILE := PACKETSQUIRREL
TPLINK_HWID := 0x5351524c
CONSOLE := ttyATH0,115200
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += packet-squirrel
define Device/pqi-air-pen
DEVICE_TITLE := PQI Air Pen
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
@ -1125,6 +1151,19 @@ define Device/wam250
endef
TARGET_DEVICES += wam250
define Device/wifi-pineapple-nano
$(Device/tplink-16mlzma)
DEVICE_TITLE := Hak5 WiFi Pineapple NANO
DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb-core kmod-usb2 kmod-usb-storage \
-swconfig -uboot-envtools
BOARDNAME := WIFI-PINEAPPLE-NANO
DEVICE_PROFILE := WIFIPINEAPPLENANO
TPLINK_HWID := 0x4e414e4f
CONSOLE := ttyATH0,115200
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += wifi-pineapple-nano
define Device/wlr8100
DEVICE_TITLE := Sitecom WLR-8100
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \