openwrt/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device...

217 lines
5.4 KiB
Diff
Raw Normal View History

From 772f3f8c0c321b2817d35f48d553db023ead2d90 Mon Sep 17 00:00:00 2001
From: notro <notro@tronnes.org>
Date: Tue, 29 Jul 2014 11:04:49 +0200
Subject: [PATCH 053/114] i2c: bcm2708: add device tree support
Add DT support to driver and add to .dtsi file.
Setup pins in .dts file.
i2c is disabled by default.
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
bcm2708: don't register i2c controllers when using DT
The devices for the i2c controllers are in the Device Tree.
Only register devices when not using DT.
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
i2c: bcm2835: make driver available on ARCH_BCM2708
Make this driver available on ARCH_BCM2708
Signed-off-by: Noralf Tronnes <notro@tronnes.org>
---
arch/arm/boot/dts/bcm2708-rpi-b.dts | 24 ++++++++++++++++++++++++
arch/arm/boot/dts/bcm2708.dtsi | 27 +++++++++++++++++++++++++++
arch/arm/mach-bcm2708/bcm2708.c | 6 ++++--
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-bcm2708.c | 24 ++++++++++++++++++++++++
5 files changed, 80 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -8,6 +8,8 @@
aliases {
spi0 = &spi0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
};
};
@@ -16,6 +18,16 @@
brcm,pins = <7 8 9 10 11>;
brcm,function = <4>; /* alt0 */
};
+
+ i2c0_pins: i2c0 {
+ brcm,pins = <0 1>;
+ brcm,function = <4>;
+ };
+
+ i2c1_pins: i2c1 {
+ brcm,pins = <2 3>;
+ brcm,function = <4>;
+ };
};
&spi0 {
@@ -38,3 +50,15 @@
spi-max-frequency = <500000>;
};
};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+};
--- a/arch/arm/boot/dts/bcm2708.dtsi
+++ b/arch/arm/boot/dts/bcm2708.dtsi
@@ -48,6 +48,26 @@
#size-cells = <0>;
status = "disabled";
};
+
+ i2c0: i2c@7e205000 {
+ compatible = "brcm,bcm2708-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@7e804000 {
+ compatible = "brcm,bcm2708-i2c";
+ reg = <0x7e804000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clk_i2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
clocks {
@@ -55,6 +75,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ clk_i2c: i2c {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
clk_spi: clock@2 {
compatible = "fixed-clock";
reg = <2>;
--- a/arch/arm/mach-bcm2708/bcm2708.c
+++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -532,6 +532,7 @@ static struct spi_board_info bcm2708_spi
};
#endif
+#ifndef CONFIG_OF
static struct resource bcm2708_bsc0_resources[] = {
{
.start = BSC0_BASE,
@@ -570,6 +571,7 @@ static struct platform_device bcm2708_bs
.num_resources = ARRAY_SIZE(bcm2708_bsc1_resources),
.resource = bcm2708_bsc1_resources,
};
+#endif
static struct platform_device bcm2835_hwmon_device = {
.name = "bcm2835_hwmon",
@@ -797,8 +799,8 @@ void __init bcm2708_init(void)
bcm_register_device(&bcm2708_alsa_devices[i]);
bcm_register_device_dt(&bcm2708_spi_device);
- bcm_register_device(&bcm2708_bsc0_device);
- bcm_register_device(&bcm2708_bsc1_device);
+ bcm_register_device_dt(&bcm2708_bsc0_device);
+ bcm_register_device_dt(&bcm2708_bsc1_device);
bcm_register_device(&bcm2835_hwmon_device);
bcm_register_device(&bcm2835_thermal_device);
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -361,7 +361,7 @@ config I2C_AXXIA
config I2C_BCM2835
tristate "Broadcom BCM2835 I2C controller"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 || ARCH_BCM2708
help
If you say yes to this option, support will be included for the
BCM2835 I2C controller.
--- a/drivers/i2c/busses/i2c-bcm2708.c
+++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -303,6 +304,21 @@ static int bcm2708_i2c_probe(struct plat
unsigned long bus_hz;
u32 cdiv;
+ if (pdev->dev.of_node) {
+ u32 bus_clk_rate;
+ pdev->id = of_alias_get_id(pdev->dev.of_node, "i2c");
+ if (pdev->id < 0) {
+ dev_err(&pdev->dev, "alias is missing\n");
+ return -EINVAL;
+ }
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &bus_clk_rate))
+ baudrate = bus_clk_rate;
+ else
+ dev_warn(&pdev->dev,
+ "Could not read clock-frequency property\n");
+ }
+
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
dev_err(&pdev->dev, "could not get IO memory\n");
@@ -336,6 +352,7 @@ static int bcm2708_i2c_probe(struct plat
adap->dev.parent = &pdev->dev;
adap->nr = pdev->id;
strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
+ adap->dev.of_node = pdev->dev.of_node;
switch (pdev->id) {
case 0:
@@ -416,10 +433,17 @@ static int bcm2708_i2c_remove(struct pla
return 0;
}
+static const struct of_device_id bcm2708_i2c_of_match[] = {
+ { .compatible = "brcm,bcm2708-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm2708_i2c_of_match);
+
static struct platform_driver bcm2708_i2c_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = bcm2708_i2c_of_match,
},
.probe = bcm2708_i2c_probe,
.remove = bcm2708_i2c_remove,