openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Rafał Miłecki 6c1852cb26 brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings KERNEL_IMAGE is used as target rule so reusing the same name causes: Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma' Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma' Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma' Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma' Unfortunately this will cause copying vmlinux.lzma over and over like: cp vmlinux.lzma FOO-kernel.bin which is redundant on brcm47xx where we never modify kernel image. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45178		2015-03-31 08:56:08 +00:00
config	x86: clean up default grub baudrate settings	2015-03-29 04:31:21 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	image.mk: fix initramfs kernel build instructions leaking across device sections	2015-03-30 13:03:58 +00:00
package	nftables: bump to 2015-03-24	2015-03-30 17:04:14 +00:00
scripts	scripts/ipkg: remove file, it is obsolete	2015-03-29 07:35:36 +00:00
target	brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings	2015-03-31 08:56:08 +00:00
toolchain	uclibc: backport an upstream i386 syscall fix	2015-03-29 10:43:07 +00:00
tools	tools: replace ipkg-utils with a reduced ipkg-build variant in scripts/	2015-03-29 07:35:26 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: clean up sitefiles, make them per-arch	2015-03-28 13:38:34 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
rules.mk	rules.mk: add newline definition	2015-03-15 19:47:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org