openwrt/target/linux/ramips/dts/CF-WR800N.dts

/dts-v1/;

/include/ "mt7620n.dtsi"

/ {
	compatible = "cf-wr800n", "ralink,mt7620n-soc";
	model = "Comfast CF-WR800N";

	chosen {
		bootargs = "console=ttyS0,115200";
        };

	palmbus@10000000 {
		gpio0: gpio@600 {
			status = "okay";
		};

		gpio1: gpio@638 {
			status = "okay";
		};

		gpio2: gpio@660 {
			status = "okay";
		};

		gpio3: gpio@688 {
			status = "okay";
		};

		spi@b00 {
			status = "okay";

			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "mx25l6405d";
				reg = <0 0>;
				linux,modalias = "m25p80", "w25q64";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "u-boot";
					reg = <0x0 0x30000>;
					read-only;
				};

				partition@30000 {
					label = "u-boot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};

				factory: partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};

				partition@50000 {
					label = "firmware";
					reg = <0x50000 0x7b0000>;
				};
			};
		};
	};

	ethernet@10100000 {
		mtd-mac-address = <&factory 0x4>;
	};

	wmac@10180000 {
		ralink,mtd-eeprom = <&factory 0>;
	};

	pinctrl {
		state_default: pinctrl0 {
			default {
				ralink,group = "ephy", "wled", "spi refclk", "i2c";
				ralink,function = "gpio";
			};
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		ethernet {
			label = "comfast:white:ethernet";
			gpios = <&gpio2 4 1>;
		};

		wifi {
			label = "comfast:white:wifi";
			gpios = <&gpio3 0 1>;
		};

		wps {
			label = "comfast:white:wps";
			gpios = <&gpio1 15 1>;
		};
	};

        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
                reset {
                        label = "reset";
                        gpios = <&gpio0 2 1>;
                        linux,code = <0x198>;
                };
        };
};