ramips: add support for Comfast CF-WR800N

This patch adds support for Comfast CF-WR800N, a wall-plug wireless router
based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 45722
lede-17.01
John Crispin 2015-05-23 15:26:39 +00:00
parent 09bf72ae05
commit 5e96c2d541
7 changed files with 133 additions and 0 deletions

View File

@ -73,6 +73,10 @@ case $board in
br6524n)
set_wifi_led "edimax:blue:wlan"
;;
cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "comfast:white:ethernet" eth0.1
set_wifi_led "comfast:white:wifi"
;;
cy-swr1100)
ucidef_set_led_default "wps" "WPS" "samsung:blue:wps" "0"
set_usb_led "samsung:blue:usb"

View File

@ -108,6 +108,12 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
;;
cf-wr800n)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "4 6t"
;;
cy-swr1100)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"

View File

@ -36,6 +36,9 @@ get_status_led() {
br6425 | br-6475nd)
status_led="edimax:green:power"
;;
cf-wr800n)
status_led="comfast:white:wps"
;;
cy-swr1100)
status_led="samsung:blue:wps"
;;

View File

@ -91,6 +91,9 @@ ramips_board_detect() {
*"Buffalo WSR-1166DHP")
name="wsr-1166"
;;
*"Comfast CF-WR800N")
name="cf-wr800n"
;;
*"Firefly FireWRT")
name="firewrt"
;;

View File

@ -33,6 +33,7 @@ platform_check_image() {
bc2 | \
broadway | \
carambola | \
cf-wr800n | \
d105 | \
dap-1350 | \
dcs-930 | \

View File

@ -0,0 +1,114 @@
/dts-v1/;
/include/ "mt7620n.dtsi"
/ {
compatible = "cf-wr800n", "ralink,mt7620n-soc";
model = "Comfast CF-WR800N";
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
gpio1: gpio@638 {
status = "okay";
};
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "ephy", "wled", "spi refclk", "i2c";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
ethernet {
label = "comfast:white:ethernet";
gpios = <&gpio2 4 1>;
};
wifi {
label = "comfast:white:wifi";
gpios = <&gpio3 0 1>;
};
wps {
label = "comfast:white:wps";
gpios = <&gpio1 15 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 2 1>;
linux,code = <0x198>;
};
};
};

View File

@ -848,6 +848,7 @@ Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,
whr_1166d_mtd_size=15400960
Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
dlink810l_mtd_size=6881280
Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n,CF-WR800N)
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
na930_mtd_size=20971520
Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
@ -877,6 +878,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7620a_MT7530,$(1))
$(call Image/Build/Profile/MT7620a_V22SG,$(1))
$(call Image/Build/Profile/AIBR100,$(1))
$(call Image/Build/Profile/CF-WR800N,$(1))
$(call Image/Build/Profile/RP-N53,$(1))
$(call Image/Build/Profile/DIR-810L,$(1))
$(call Image/Build/Profile/WHR300HP2,$(1))