openwrt-owl/package
Matthias Schiffer 1a16cb9c67
mac80211, hostapd: always explicitly set beacon interval
One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-13 17:12:54 +02:00
..
base-files base-files: implement ucidef_set_hostname(), ucidef_set_ntpserver() 2017-05-03 13:47:57 +02:00
boot uboot-omap: rename patch to 101-disable-thumb-omap3.patch 2017-04-30 12:19:07 +02:00
devel perf: Disable perf for ARC770 only, enable for ARC HS38 2017-05-11 00:53:05 +02:00
firmware ath10k-firmware: update to latest version 2017-04-12 09:53:41 +02:00
kernel mac80211, hostapd: always explicitly set beacon interval 2017-05-13 17:12:54 +02:00
libs toolchain: Package libgomp 2017-05-11 13:42:55 -07:00
network mac80211, hostapd: always explicitly set beacon interval 2017-05-13 17:12:54 +02:00
system opkg: alternatives: use ERROR level for symlink failure 2017-05-03 17:40:47 +08:00
utils fritz-tools: Find zlib.h header file 2017-05-11 13:42:39 -07:00
Makefile build: cleanup tmp/ dir of target rootfs 2017-05-02 22:10:50 +08:00