mirror of https://github.com/hak5/openwrt-owl.git
1a16cb9c67
One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> |
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| feeds.conf.default | ||
| rules.mk | ||
README
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org