38bd9b4337
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
585d19d168
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
68c931c637
generic: rtl8367: add vendor prefix to the compatible string
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
348640f4b3
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
d16de0b69f
fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
202fb45deb
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
df7af06f1f
fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
e1a74d8ff7
fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
495296bba9
malta: add le64 and be64 sub targets
...
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
12b925dcbf
malta: move 32-bits options to subtarget config
...
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
5eb8ba7f19
malta: move endianness kernel configuration to subtarget
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
348cae15d2
buildroot: factor knowledge of a 64bits architecture
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36204
2013-04-05 12:36:19 +00:00
46dfa04a08
malta: enable mips16 feature flag
...
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
9e1d2c15d9
buildroot: allow enabling MIPS16 user-space build
...
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36202
2013-04-05 12:36:12 +00:00
d9bb7ff7a5
Migrate lantiq platform to common led helper functions
...
http://patchwork.openwrt.org/patch/3316/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
a4c745ee74
add a missing patch that makes board detection work again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
c838ec2391
Patch for invoking (pre)init
...
http://patchwork.openwrt.org/patch/3485/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36183
2013-04-03 10:00:50 +00:00
93899a1329
add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
7e54357bd5
fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
37401dca92
Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
910b705155
add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
c1710901c5
add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
f3643374c4
there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
99e0ff1123
make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
c8d5f5e0ef
add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
770b28f146
add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
2328e8389e
fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
94972a5268
fix rt3883 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36166
2013-04-03 09:59:37 +00:00
0716ae8abe
fix rt305x config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36165
2013-04-03 09:59:33 +00:00
dce4945972
mark rt288x broken until the test hardware arrives in the mail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36164
2013-04-03 09:59:16 +00:00
46f141637c
add patches for v3.8
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36163
2013-04-03 09:59:10 +00:00
4f86ea43ca
remove old ralink 3.8 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36162
2013-04-03 09:58:48 +00:00
d4db00205d
move files to files-3.7
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36161
2013-04-03 09:58:44 +00:00
86a691144b
add feature gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36160
2013-04-03 09:58:37 +00:00
1105bd2897
add OF support to rtl8367b driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36159
2013-04-03 09:58:33 +00:00
cc34858d4a
make firmware loading work on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36158
2013-04-03 09:58:28 +00:00
72f5901eb1
mpc85xx: enable ath9k and wpad-mini by default
...
SVN-Revision: 36142
2013-04-01 09:53:29 +00:00
98ef9e5411
brcm47xx: generate images for Linksys E.... models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36139
2013-03-27 15:51:28 +00:00
b4eabad019
gemini: remove usage of ehci_port_power() it was removed in kernel 3.8
...
SVN-Revision: 36138
2013-03-27 15:48:07 +00:00
31c9452120
brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
...
SVN-Revision: 36137
2013-03-27 15:35:52 +00:00
a9e5a178ef
brcm47xx: generate images for more WRT...N models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36136
2013-03-27 15:34:55 +00:00
b92e750027
upgrade to 3.9-rc4, disable unsupported boards
...
SVN-Revision: 36128
2013-03-25 14:18:32 +00:00
c90078ce87
refresh patches against -rc4
...
SVN-Revision: 36127
2013-03-25 13:53:48 +00:00
f26378fd7c
add missing symbols
...
SVN-Revision: 36126
2013-03-25 13:53:17 +00:00
f7da2127ab
ar71xx: fix ethernet LEDs on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36122
2013-03-25 06:40:03 +00:00
39c132d154
ar71xx: add GPIO output select values for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36121
2013-03-25 06:40:00 +00:00
849201b1d8
ar71xx: add default LED configuration for the WL-WRD3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36120
2013-03-24 21:07:21 +00:00
cd5cca4ba8
ar71xx: fix USB power GPIO on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36119
2013-03-24 19:23:47 +00:00
4daefc9480
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36118
2013-03-24 19:23:45 +00:00
a4a2a7189f
ar71xx: add diag support for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36117
2013-03-24 19:23:43 +00:00
38c991311b
ar71xx: add default switch configuration for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36116
2013-03-24 19:23:36 +00:00
bb81e695f9
kernel: add missing config options for au1000 target
...
SVN-Revision: 36115
2013-03-24 14:01:38 +00:00
18c47be19a
kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
...
SVN-Revision: 36102
2013-03-21 14:56:04 +00:00
4995f23669
kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
...
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.
SVN-Revision: 36101
2013-03-21 14:50:59 +00:00
d5cf67297a
brcm47xx: generate images for some more devices
...
These devices should be supported by trunk now.
SVN-Revision: 36099
2013-03-20 22:01:18 +00:00
c9544f4af0
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
SVN-Revision: 36098
2013-03-20 21:59:24 +00:00
99638c5288
kernel: add some missing config options for kernel 3.9
...
SVN-Revision: 36097
2013-03-20 21:53:51 +00:00
b1cc7a90a4
kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection ( #13193 )
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36091
2013-03-19 14:13:39 +00:00
fe157ea1ba
uml: remove 3.6 kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36080
2013-03-17 19:47:04 +00:00
1898218119
uml: remove 3.3. kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36079
2013-03-17 19:46:59 +00:00
c36db5f66a
uml: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36078
2013-03-17 19:46:54 +00:00
a987d1aaa3
uml: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36077
2013-03-17 19:46:49 +00:00
499f92c3db
uml: remove 3.2 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36076
2013-03-17 19:46:43 +00:00
ce33aaafcf
ep93xx: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36075
2013-03-17 19:46:37 +00:00
a5551d366a
kernel: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36074
2013-03-17 19:46:32 +00:00
472bb8d51a
ep93xx: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36073
2013-03-17 19:46:25 +00:00
743e9e7009
ep93xx: account for sound soc directory rename in 3.7
...
sound/soc/ep93xx -> sound/soc/cirrus
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36071
2013-03-17 19:45:55 +00:00
6a7100c760
kernel: set regmap-core module license
...
Fixes the following issues:
[ 7.660000] regmap_core: module license 'unspecified' taints kernel
[ 7.690000] Disabling lock debugging due to kernel
[ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[ 7.720000] regmap_core: Unknown symbol devres_add (err 0
[ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[ 7.780000] regmap_core: Unknown symbol devres_free (err 0
[ 7.800000] regmap_core: Unknown symbol devres_find (err 0
[ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36070
2013-03-17 19:45:48 +00:00
7987c8d0dc
au1000: remove support for 3.3. kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36067
2013-03-17 14:33:47 +00:00
c56c18168e
au1000: switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36066
2013-03-17 14:33:41 +00:00
5592a619d0
au1000: keep the MTX-1 watchdog pin low during boot
...
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36065
2013-03-17 14:33:36 +00:00
d5c2e83fa5
ep93xx: remove 3.3 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36064
2013-03-17 14:33:23 +00:00
9cef30a519
mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36063
2013-03-17 14:33:18 +00:00
8ed2299646
mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36062
2013-03-17 14:33:13 +00:00
8bc84bac31
mcs814x: remove PCI code
...
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36061
2013-03-17 14:33:07 +00:00
a9ef927cce
mcs814x: implement MULTI_IRQ_HANDLER
...
Allows us to get rid of the IRQ entry point assembly
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36060
2013-03-16 22:25:47 +00:00
18908139f3
mcs814x: use the standard device tree binding to represent a PHY node
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36059
2013-03-16 22:25:41 +00:00
1996cfe9dd
mpc85xx: add profile and build image for the TL-WDR4900 v1 board
...
Now that the ethernet switch is working, create firmware
images to make impatient users happy.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36051
2013-03-15 16:11:45 +00:00
72253b9073
generic: ar8216: start AR8327 switch from the probe routine
...
The AR8327 switch gets its configuration from platform
data or from the device-tree. This allows to start it
from the probe routine. Doing so makes it usable with
ethernet drivers which only connects to the PHY device
when the ethernet interface is opened.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36050
2013-03-15 16:06:28 +00:00
5503686f69
generic: ar8216: add ar8xxx_start helper
...
Move switch starting code into a separate function.
This makes it usable from other places.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36049
2013-03-15 16:06:25 +00:00
44ce8dac88
mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36048
2013-03-15 15:53:06 +00:00
7ba6a8d8e8
generic: ar8216: add OF configuration support for AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36047
2013-03-15 15:50:08 +00:00
ee12b1b7d5
generic: ar8216: separate platform_data based AR8327 code
...
Move platform_data specific configuration code
into a separate routine. Do it in preparation
for the upcoming OF support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36046
2013-03-15 15:50:05 +00:00
d88f66ae21
generic: ar8216: don't use platform_data in ar8327_init_port
...
Fetch the PORT_STATUS values in ar8327_hw_init and
store those in a private data stucture for later use.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36045
2013-03-15 15:50:02 +00:00
9d3f70d503
generic: ar8216: move the ar8327_get_port_init_status function
...
It will be used in ar8327_probe routine.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36044
2013-03-15 15:50:00 +00:00
17d735fc46
generic: ar8216: simplify and rename ar8327_config_port
...
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36043
2013-03-15 15:49:57 +00:00
3fee1bddbe
generic: ar8216: remove superfluous pdata checks
...
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36042
2013-03-15 15:49:55 +00:00
07532dca7f
kernel: update linux 3.8 to 3.8.3
...
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
d614f8a880
ar71xx: build images for the TL-MR11U v2
...
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]
Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36038
2013-03-15 14:35:52 +00:00
35d41db979
ar71xx: rw2458n - Use eeprom (art) from wifi card
...
Use eeprom (art) from included wifi card, not hard coded in flash.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36037
2013-03-15 14:35:50 +00:00
8deffcba7e
ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
...
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779
Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36036
2013-03-15 14:35:48 +00:00
4d5860cdd6
ACMP252: fix USB-enable GPIO and use default PCI configuration for now
...
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
0dbe4f502d
fix buttons on vr9 eval kit
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
9b4a8c6d1e
select vdsl packages on vr9 boards
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
0f7f1f3347
fix fritzbox 3370 partitions/memory/cmdline
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
5452dbad61
build jffs images for nand based fritzbox
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
b98ae2b149
bump to v3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36014
2013-03-14 18:42:29 +00:00
3ab75692f3
move GPHY FW blobs to non versioned folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36013
2013-03-14 18:42:21 +00:00
b2e63b8ea8
kernel: add support for 3.9-rc2
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36008
2013-03-14 14:45:56 +00:00
1360067c4a
update the /init file to start /sbin/init
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36002
2013-03-13 18:11:13 +00:00
043d56b646
make sure the console works when using procd as our pid 1
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36000
2013-03-13 18:11:00 +00:00
f0f72ce262
gemini: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35995
2013-03-12 18:22:34 +00:00
04f2ef9e66
gemini: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35994
2013-03-12 18:22:33 +00:00
54b9b4d8a5
gemini: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35993
2013-03-12 18:22:22 +00:00
48a4b3a0cd
fixes NO_XIP on CFI0001 flash
...
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
e3a6ea65e1
add support for AudioCodes AC-252
...
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
0b881eea72
unbreak dgn3500 spi-gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
b22cbac68f
make sure errors get sent to /dev/null
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35988
2013-03-12 13:52:40 +00:00
fad5f5700e
make sure errors get sent to /dev/null
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35987
2013-03-12 13:52:33 +00:00
76934b6779
avr32: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35985
2013-03-12 13:28:33 +00:00
a71b9f5d04
avr32: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35984
2013-03-12 13:28:32 +00:00
19b2c06b09
avr32: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35983
2013-03-12 13:28:31 +00:00
f04cccb842
avr32: add sysupgrade support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35982
2013-03-12 13:28:27 +00:00
6c3dd84897
avr32: add firmware partition
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35981
2013-03-12 13:28:23 +00:00
cb9fad715c
avr32: add diag support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35980
2013-03-12 13:28:21 +00:00
de0d19ac3d
avr32: create network config dynamically
...
The default network configuration from base-files
is not correct for the NGW100 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35979
2013-03-12 13:28:19 +00:00
73caeba522
avr32: built the firmware images from the lzma compressed uImage
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35978
2013-03-12 13:28:16 +00:00
12a213227e
mpc52xx: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35977
2013-03-12 07:18:37 +00:00
1ed39da53d
mpc52xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35976
2013-03-12 07:18:36 +00:00
ae0af74654
mpc52xx: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35975
2013-03-12 07:18:34 +00:00
fe3df4b593
ramips: add profile and build image for the Upvel UR-326N4G board
...
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35972
2013-03-11 21:02:45 +00:00
d543f4b771
ramips: add user-space support for the Upvel UR-326N4G board
...
[juhosg: fix mac address setup]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35971
2013-03-11 21:02:43 +00:00
3c2ef04a0e
ramips: add kernel support for the Upvel UR-326N4G board
...
[juhosg: add missing symbols to config-3.{7,8}]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35970
2013-03-11 21:02:40 +00:00
14ca5fc98b
ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35966
2013-03-11 19:52:54 +00:00
72fc0c1906
ar71xx: add AR934X_GPIO_FUNC_* defines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35965
2013-03-11 19:52:51 +00:00
44cc1507e9
ar71xx: makefile changes to build image for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35964
2013-03-11 15:55:25 +00:00
2998abab7c
ar71xx: add user-space support for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35962
2013-03-11 15:55:22 +00:00
902dd27383
ar71xx: add kernel support for MR3420v2
...
[juhosg: use gpio_request_one to enable the USB power]
Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>
SVN-Revision: 35961
2013-03-11 15:55:20 +00:00
5c5e1c0a9d
ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
...
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35960
2013-03-11 15:55:19 +00:00
257bfc21af
ar71xx: add profile support for dir-835-a1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35959
2013-03-11 15:55:17 +00:00
3fa3cbae7c
ar71xx: add user space support for dir-835-a1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35958
2013-03-11 15:55:15 +00:00
a7525f5f5d
ar71xx: add kernel support for dir-835-a1
...
[juhosg:
- remove custom mdio bus info and platform data for ar8327, clear the
.led_cfg field from dir835a1_setup instead,
- remove arguments of dir835c1_generic_setup function, register the
LEDs directly from the board specific setup instead]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35957
2013-03-11 15:55:13 +00:00
bd6c9d6252
cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
...
SVN-Revision: 35953
2013-03-11 02:29:53 +00:00
d7a529709a
cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
...
SVN-Revision: 35952
2013-03-11 02:29:47 +00:00
0d13baff1e
cns3xxx: increase number of ethernet driver rx buffers
...
SVN-Revision: 35951
2013-03-10 21:59:32 +00:00
ee2b511e1f
cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
...
SVN-Revision: 35950
2013-03-10 21:59:28 +00:00
d22ac8d8fb
cns3xxx: minor ethernet driver cleanup
...
SVN-Revision: 35949
2013-03-10 21:59:21 +00:00
e1f24d99e1
brcm47xx: refresh config
...
SVN-Revision: 35948
2013-03-10 20:42:26 +00:00
89d4fceee2
xburst: fix compilation: remove the __dev attributes
...
SVN-Revision: 35946
2013-03-10 20:26:28 +00:00
45b24fa771
kernel: add some missing config options found by the buildbot.
...
SVN-Revision: 35945
2013-03-10 20:25:19 +00:00
9facda9570
cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
...
SVN-Revision: 35943
2013-03-10 18:25:20 +00:00
c44506fcbd
cns3xxx: fix an rx irq handling corner case
...
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.
SVN-Revision: 35942
2013-03-10 18:25:16 +00:00
c1adc79328
cns3xxx: fix ethernet driver memory barrier usage
...
SVN-Revision: 35941
2013-03-10 18:25:11 +00:00
9a71711d39
realview: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35940
2013-03-10 18:06:31 +00:00
35dd42f976
realview: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35939
2013-03-10 18:06:29 +00:00
53e0f10246
kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
...
SVN-Revision: 35938
2013-03-10 17:04:36 +00:00
2b83c9bd8a
kernel: ensure that the arm exception handlers get preserved
...
SVN-Revision: 35937
2013-03-10 17:04:31 +00:00
f0d7ba33ef
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
...
SVN-Revision: 35936
2013-03-10 14:51:42 +00:00
5b3ab0e21e
xburst: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35934
2013-03-10 13:24:54 +00:00
00caedf86e
xburst: switch to 3.8
...
Compile tested only, so add broken flag.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35933
2013-03-10 13:24:52 +00:00
8942d4dc04
xburst: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35932
2013-03-10 13:24:50 +00:00
15718f5387
linux/3.8: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35931
2013-03-10 13:24:47 +00:00
f25c050aa9
adm5120: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35930
2013-03-10 13:24:46 +00:00
5502bbe2ca
adm5120: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35929
2013-03-10 13:24:45 +00:00
c42da71d8b
malta: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35928
2013-03-10 13:24:44 +00:00
6720fc6952
malta: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35927
2013-03-10 13:24:43 +00:00
82dc64b19b
atheros: remove 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35926
2013-03-10 13:24:42 +00:00
5b8e106ae6
atheros: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35925
2013-03-10 13:24:40 +00:00
ce5806378e
mpc83xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35924
2013-03-10 13:24:39 +00:00
c79c132229
mpc83xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35923
2013-03-10 13:24:38 +00:00
27ba973c06
rb532: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35922
2013-03-10 13:21:40 +00:00
501e4d331d
rb532: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35921
2013-03-10 13:21:33 +00:00
8223205a29
rb532: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35920
2013-03-10 13:21:29 +00:00
e8a5312bef
ar71xx: correct board name to make LEDs work on RB750
...
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35919
2013-03-10 07:20:57 +00:00
d85ffaabe9
ppc40x: remove __dev_{in,ex}it annotations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35918
2013-03-10 07:20:54 +00:00
446409f43e
cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
...
SVN-Revision: 35917
2013-03-10 01:27:04 +00:00
95431b7843
cns3xxx: remove linux 3.3 support
...
SVN-Revision: 35916
2013-03-10 01:01:55 +00:00
3d919b7c08
cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance)
...
SVN-Revision: 35915
2013-03-10 01:01:51 +00:00
44ed7d664a
brcm47xx: add some more partition parser fixes by Rafał Miłecki
...
SVN-Revision: 35912
2013-03-09 19:48:03 +00:00
694050a4cf
brcm47xx: netconfig: add bacis support for swconfig
...
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.
SVN-Revision: 35911
2013-03-09 19:24:43 +00:00
72af5b4b35
kernel: add a missing config symbol for 3.8
...
SVN-Revision: 35910
2013-03-09 19:04:37 +00:00
95f14d052a
cns3xxx: add linux 3.8 support and use it by default
...
SVN-Revision: 35908
2013-03-09 18:51:46 +00:00
85348d602e
kernel: fix mpcore watchdog symbol export
...
SVN-Revision: 35907
2013-03-09 18:51:39 +00:00
938361b055
cns21xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35886
2013-03-04 16:08:41 +00:00
a61431b154
cns21xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35885
2013-03-04 16:08:39 +00:00
3e3fc552bc
ppc44x: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35884
2013-03-04 15:16:37 +00:00
d24041665c
ppc44x: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35883
2013-03-04 15:16:35 +00:00
c67127ad23
ppc40x: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35882
2013-03-04 15:16:33 +00:00
341b5ba939
ppc40x: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35881
2013-03-04 15:16:32 +00:00
b412a81524
brcm63xx: fix LED names for various boards
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35880
2013-03-04 13:42:35 +00:00
947bc9d36f
ar71xx: add backported watchdog patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35879
2013-03-04 12:08:28 +00:00
1d55249d7c
ar71xx: use backported QCA955x patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35878
2013-03-04 11:48:15 +00:00
64a9fe2894
ar71xx: use backported PCI patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35877
2013-03-04 11:48:08 +00:00
12d49b5195
ar71xx: use backported MISC IRQ patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35876
2013-03-04 11:48:06 +00:00
4c31b9f43e
ar71xx: use backported GPIO patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35875
2013-03-04 11:48:04 +00:00
120028af99
ar71xx: enable building ramdisk images for WZRHPG30XNH board types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35874
2013-03-04 11:37:28 +00:00
0ad50b0bec
ar71xx: use backported SPI patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35873
2013-03-04 09:40:44 +00:00
c28cdfab31
mpc85xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35872
2013-03-04 09:37:25 +00:00
84e960f7aa
mpc85xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35871
2013-03-04 09:37:24 +00:00
3ee484d54c
ar71xx: remove 3.7 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35870
2013-03-04 09:03:50 +00:00
d5adb0dbdd
ar71xx: switch to 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35869
2013-03-04 08:47:38 +00:00
a87a96da67
kernel: update linux 3.8 to 3.8.2
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35868
2013-03-04 08:43:55 +00:00
a5ebfc79ba
ar71xx: rework changes from r35840
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35865
2013-03-03 21:59:34 +00:00
26fbc15a86
kernel: update linux 3.8 to 3.8.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35862
2013-03-03 13:58:52 +00:00
da79a4c698
linux/3.8: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35861
2013-03-03 13:58:10 +00:00
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
4491da2bd4
ar71xx: update MAC address assignment for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35855
2013-03-03 12:47:37 +00:00
200aa6db83
ar71xx: fixes leds for dir-825-c1
...
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35854
2013-03-03 12:47:33 +00:00
8798c73860
ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension
...
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.
The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.
[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35853
2013-03-03 12:47:31 +00:00
Gabor Juhos
John Crispin
Florian Fainelli
Felix Fietkau
Hauke Mehrtens
Imre Kaloz
Luka Perkov