Commit Graph

9729 Commits (f460388ce20403692d06dfbd6ddd7685b15ff555)

Author SHA1 Message Date
Gabor Juhos 21b15ddda5 mpc85xx: image: fix building of multiple dtb files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35436
2013-02-01 17:28:47 +00:00
Gabor Juhos d158dfc607 linux/3.3: disable crashlog on PPC
It causes NULL pointer dereference:

[    0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c
[    0.644090] Unable to handle kernel paging request for data at address 0x00000000
[    0.651533] Faulting instruction address: 0xc025d620
[    0.656483] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.661856] P1010 RDB
[    0.664113] Modules linked in:
[    0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38
[    0.672101] REGS: c7831ef0 TRAP: 0300   Not tainted  (3.3.8)
[    0.677740] MSR: 00029000 <CE,EE,ME>  CR: 42022082  XER: 20000000
[    0.683817] DEAR: 00000000, ESR: 00000000
[    0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000
[    0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff
[    0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000
[    0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000
[    0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824
[    0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8
[    0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8
[    0.736503] Call Trace:
[    0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable)
[    0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198
[    0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120
[    0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68
[    0.762022] Instruction dump:
[    0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0
[    0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35435
2013-02-01 17:28:44 +00:00
Gabor Juhos fb2e2a56d7 refresh kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
2013-02-01 17:28:40 +00:00
Gabor Juhos 6805275fdc ar71xx: sysupgrade - fix OpenMesh MR600 total flash size
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35433
2013-02-01 15:50:54 +00:00
Gabor Juhos 979676ffcc ar71xx: add sysupgrade support for OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35430
2013-02-01 15:50:47 +00:00
Gabor Juhos 2af995ba1d ar71xx: add user-space support for OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35429
2013-02-01 15:50:45 +00:00
Gabor Juhos 8837d3a49b ar71xx: add kernel support for the OpenMesh MR600v2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35428
2013-02-01 15:50:42 +00:00
Gabor Juhos 150bb9d0b1 ar71xx: remove unused OpenMesh MR600 led definitions
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35427
2013-02-01 15:50:39 +00:00
Gabor Juhos fe3db74276 ar71xx: remove unused OpenMesh MR6000 platform code
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35426
2013-02-01 15:50:37 +00:00
Gabor Juhos 492cbcdd6b ar71xx: build image for the TL-WDR3500 board
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35425
2013-02-01 15:50:34 +00:00
Gabor Juhos 119dc460a3 ar71xx: add user-space support for TL-WDR3500 board
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35424
2013-02-01 15:50:32 +00:00
Gabor Juhos 5bd02ca895 ar71xx: add kernel support for the TL-WDR3500 board
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35423
2013-02-01 15:50:29 +00:00
Jonas Gorski ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35407
2013-01-30 00:19:21 +00:00
Gabor Juhos f7ff677169 ar71xx: add profile and build image for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35403
2013-01-29 22:50:57 +00:00
Gabor Juhos 2a5193308f ar71xx: add user space support for dir-825-c1
[juhosg: fix whitespaces in some scripts]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35402
2013-01-29 22:50:54 +00:00
Gabor Juhos 800da21cb1 ar71xx: add kernel support for dir-825-c1
[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35401
2013-01-29 22:50:50 +00:00
Gabor Juhos 5a2aa8f184 generic: fix default compression selection in ubifs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35398
2013-01-29 21:32:22 +00:00
Gabor Juhos da9a704e92 ar71xx: add profile and generate images for the AP132 board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35397
2013-01-29 19:12:34 +00:00
Gabor Juhos 5d4ddbce72 ar71xx: add user-space support for the AP132 board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35396
2013-01-29 19:12:32 +00:00
Gabor Juhos 5ca187570f ar71xx: add kernel support for Atheros AP132 Reference Board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35395
2013-01-29 19:12:30 +00:00
Gabor Juhos 8a9d92f125 ar71xx: fix ethernet device registration for the QCA9556 SoC
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35394
2013-01-29 19:12:28 +00:00
Gabor Juhos e9dbff1193 ar71xx: add kernel support for the QCA9556 SoC
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35393
2013-01-29 19:12:26 +00:00
Gabor Juhos df15e5cd61 ar71xx: enable fast flash read on dual-flash devices
This improves flash read speed on various Buffalo units.

mtd_speedtest results on the WZR-HP-AG300H:

                          old         new        delta
eraseblock read speed:  726 KiB/s   2068 KiB/s   +184.85%
page read speed:        699 KiB/s   1973 KiB/s   +182.26%
2 page read speed:      711 KiB/s   2043 KiB/s   +187.34%

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35392
2013-01-29 19:12:25 +00:00
Gabor Juhos 562ba537fc kernel: update linux 3.7 to 3.7.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35390
2013-01-29 18:29:45 +00:00
John Crispin c6744513a3 fix mtd_mp25p80_add_gd25q32_gd25q64.patch
SVN-Revision: 35378
2013-01-29 11:06:57 +00:00
Florian Fainelli 714b2cfef3 Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit
Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit.

The patch was added to "linux/generic/patches-3.6" instead of
"target/linux/generic/patches-3.6".
I also fixed a missing patch space and refreshed generic patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35367
2013-01-29 09:46:11 +00:00
Gabor Juhos e252a1492c generic: fix build failure in MIPS kexec code if SMP is enabled
Fix it for older kernels as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35366
2013-01-29 09:44:58 +00:00
Gabor Juhos 22ce389e6a ar71xx: add TP-LINK WA-801ND to run-time model detection
A small cosmetic fix to show the HW model name correctly in LuCI.

Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35365
2013-01-29 09:40:29 +00:00
Gabor Juhos 1b3c6ad1fb generic: fix build failure in MIPS kexec code if SMP is enabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35364
2013-01-29 09:40:23 +00:00
John Crispin 756a7c5451 fix for non-blinking LAN LEDs
https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359
2013-01-28 18:06:31 +00:00
John Crispin a0f7a3c214 dont load gptu on ase
fixes #12792

SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
John Crispin d93706154b ramips: reset switch on single-port devices
Signed-off-by: Daniel Gole <dgolle@allnet.de>

SVN-Revision: 35356
2013-01-28 17:44:41 +00:00
John Crispin 0de0955931 refresh patches
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
John Crispin 0183df8ed9 Fix ARV7518 USB
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
John Crispin 3534757bb9 Add ath9k eeprom and pci fixup support
Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
John Crispin 5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
Felix Fietkau 1dc9c8ef69 kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed
SVN-Revision: 35342
2013-01-27 23:23:39 +00:00
Hauke Mehrtens 68aeb7af8e brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe.
SVN-Revision: 35341
2013-01-27 21:48:28 +00:00
Hauke Mehrtens a9175c90cf kernel: b53: the b53 spi driver depends on spi
SVN-Revision: 35340
2013-01-27 21:39:53 +00:00
Hauke Mehrtens 62554217fc kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8
SVN-Revision: 35336
2013-01-27 21:18:52 +00:00
Felix Fietkau 8193bbe59a netfilter: add support for flushing conntrack via /proc
SVN-Revision: 35330
2013-01-27 19:02:38 +00:00
Felix Fietkau 156a6e7999 kernel: clean up crypto kconfig options on 3.8
SVN-Revision: 35329
2013-01-27 17:49:09 +00:00
Hauke Mehrtens 721bf97863 kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
These attributes where removed with kernel 3.8 and are now causing compile errors.

SVN-Revision: 35328
2013-01-27 17:48:48 +00:00
Felix Fietkau ed7ca5d44e kernel: clean up crypto related kconfig options
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
Felix Fietkau 8a1091ad53 ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma
SVN-Revision: 35326
2013-01-27 16:38:27 +00:00
Felix Fietkau 044c316167 kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
Reduces kernel size after LZMA by about 5k on MIPS

SVN-Revision: 35325
2013-01-27 16:21:08 +00:00
Hauke Mehrtens e083c7926b brcm47xx: create image for Netgear WNDR3400 V1
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
Hauke Mehrtens 05623aebef brcm47xx: add initial board detection code
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
Hauke Mehrtens a83d7bb109 brcm47xx: add gpio to irq function again
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
Felix Fietkau 8933b918cd kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
in combination with kernel symbol export stripping this significantly reduces
the kernel image size

SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
Gabor Juhos 15be1c9ee7 kernel: update linux 3.7 to 3.7.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
Florian Fainelli 680f460861 kernel: refresh 3.8 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35317
2013-01-24 17:04:52 +00:00
Florian Fainelli 9781461a3d mvebu: update to 3.8-rc4
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35316
2013-01-24 17:04:46 +00:00
Hauke Mehrtens 4a69e20a10 kernel: add missing config options for 3.8
SVN-Revision: 35315
2013-01-24 14:48:15 +00:00
Hauke Mehrtens 76c12ff797 brcm47xx: change generic profiles
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
Felix Fietkau b60fc82ce5 kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
SVN-Revision: 35310
2013-01-23 16:31:38 +00:00
Felix Fietkau 8ce8960959 ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
Jonas Gorski 8411e5c06e bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
Jonas Gorski 17d51121a6 bcm63xx: expose the internal switch to b53
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Jonas Gorski bb0118c66f generic: add b53 swconfig switch driver
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
Jonas Gorski 3e998d9cf9 bcm63xx: move bcm63xx-spi into the kernel
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
Felix Fietkau 46e4246d61 kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore
SVN-Revision: 35248
2013-01-19 19:14:37 +00:00
Gabor Juhos ed6d399f8d ramips: add profile and build image for the Tenda 3G300M
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
Gabor Juhos 9891603eb5 ramips: add user-space support for the Tenda 3G300M
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
Gabor Juhos 7eff5d2df0 ramips: add kernel support for the Tenda 3G300M
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
Gabor Juhos f7a943694f ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.

Compile-tested, the generated files inspected with "file" utility.

[juhosg:
 - keep the factory.bin images to avoid users confusion,
 - use GENERIC_4M template for the W306R V2.0
 - update commit log]

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
Gabor Juhos 6aebe6a65d ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
Gabor Juhos 60dde219d4 ramips: do not stop the build if some targets fail
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35238
2013-01-19 08:51:45 +00:00
Jonas Gorski c3eeff807f generic: rtl8366_smi: only assign pvid if no pvid was set yet
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged
and untagged traffic on a port and the untagged vlan isn't the last one
of which the port is a member.

Tested on RTL8366S and RTL8367R.

Fixes #8501.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35227
2013-01-18 15:19:11 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Gabor Juhos 0de21d9747 kernel: update linux 3.7 to 3.7.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
Florian Fainelli c8215775f3 mvebu: enable PCI in kernel configuration
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35214
2013-01-17 22:29:26 +00:00
Florian Fainelli 5e45a4344c mvebu: enable PCIe on Marvell Armada 370 Reference Design
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35213
2013-01-17 22:29:22 +00:00
Florian Fainelli cf9343ac86 mvebu: enable USB on Armada 370 Reference Design
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35212
2013-01-17 22:29:18 +00:00
Florian Fainelli 7e1e7063c2 mvebu: add preliminary support for PCI express
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35211
2013-01-17 22:29:13 +00:00
Florian Fainelli 29c21b973b mvebu: refresh patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35210
2013-01-17 22:28:58 +00:00
Florian Fainelli 28acc6588d kernel: refresh 3.8 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35209
2013-01-17 22:28:53 +00:00
Florian Fainelli a286a55c6f mvebu: add board detection scripts
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35208
2013-01-17 22:28:48 +00:00
Florian Fainelli f7858466e2 mvebu: enable /proc/devicetree usage
This is going to be used for proper user-space board identification (ala
mcs814x).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35207
2013-01-17 22:28:37 +00:00
Florian Fainelli 15b4681e3e mvebu: add default profile
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC,
SDIO)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35206
2013-01-17 22:28:33 +00:00
Jo-Philipp Wich 7399df1d69 x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults (#12821)
SVN-Revision: 35200
2013-01-17 15:46:26 +00:00
Gabor Juhos 57f7408b8a generic: add EHCI|OHCI platform driver fix to 3.[36]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35194
2013-01-17 13:54:14 +00:00
Felix Fietkau 576aa2af0c ramips: enable BR6425N in kernel config
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35191
2013-01-17 09:39:44 +00:00
Florian Fainelli 05466923b8 mvebu: add support for EHCI controller
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35181
2013-01-15 19:55:50 +00:00
Florian Fainelli c53a347034 mvebu: add support for the Marvell Armada 370 Reference Design board
Keep the patches in sync with the upstream developments.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35179
2013-01-15 19:55:40 +00:00
Florian Fainelli 58f8c5d87a mvebu: enable SMP with SMP on UP enabled
The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35178
2013-01-15 19:55:31 +00:00
Florian Fainelli fa1afc1fa9 mvebu: add support for RTC
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35176
2013-01-15 19:55:19 +00:00
Felix Fietkau b3b04e9fb1 kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8
SVN-Revision: 35162
2013-01-14 18:55:36 +00:00
Gabor Juhos 78dc69e1d4 generic: remove EHCI platform driver fix from 3.8
It is not needed on 3.8.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35160
2013-01-14 17:53:55 +00:00
Gabor Juhos b035c594ae generic: add EHCI|OHCI platform driver fix from the cns21xx target
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35159
2013-01-14 17:47:23 +00:00
Florian Fainelli 1e103b2ecc target: enable XZ BCJ decompressor code after r35097
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
2013-01-14 16:34:25 +00:00
Felix Fietkau e0e3509b5c kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
SVN-Revision: 35154
2013-01-14 16:08:18 +00:00
Felix Fietkau 1474359bd3 ar71xx: fix unaligned access in cls_u32
SVN-Revision: 35132
2013-01-13 16:48:23 +00:00
Felix Fietkau e67b6ee395 ar71xx: fix unaligned access in a few more places
SVN-Revision: 35130
2013-01-13 15:37:58 +00:00
Felix Fietkau b5bcbdfbb5 ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32
SVN-Revision: 35129
2013-01-13 14:54:39 +00:00
Felix Fietkau 53e0ba49b9 ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed
SVN-Revision: 35127
2013-01-13 13:06:09 +00:00
Felix Fietkau 5d55cece6e kernel: add back the mips module relocation patch
SVN-Revision: 35126
2013-01-13 12:23:42 +00:00
Felix Fietkau 764520975c ar71xx: add more cpu feature overrides, slightly reduces kernel size
SVN-Revision: 35125
2013-01-13 11:33:48 +00:00
Felix Fietkau 310724c14d ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel
SVN-Revision: 35124
2013-01-13 11:33:44 +00:00
Hauke Mehrtens 2bf03f971d brcm47xx: BCMA - Update default IRQ assignment per upstream change
Update the default IRQ assignment for unrecognized devices per
the upstream change.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35121
2013-01-12 15:00:01 +00:00