2d28a07df7
kernel/3.1[02]: add AR8216_PHY_LEDS option
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39339
2014-01-20 10:22:59 +00:00
0056ac55af
generic: ar8216: add custom LED support for the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39338
2014-01-20 10:22:56 +00:00
15d41de1eb
generic: ar8216: allow to use chip specific cleanup callback
...
It will be used for AR8327.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39337
2014-01-20 10:22:55 +00:00
c7652f1f9e
generic: ar8216: add optimized rmw operation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39336
2014-01-20 10:22:54 +00:00
b4dc45e07d
ar71xx: rb2011: fix eth5 LED
...
The eth5 LED on the RB2011 is not working because the
LED control rule is missing. Fix it.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39335
2014-01-20 10:22:49 +00:00
1de0eac947
ubox: update to latest git head
...
adds option to set internal buffer size
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39333
2014-01-19 19:10:09 +00:00
fac5e62abd
firewall: don't reload if there were no address or data changes
...
This fixes packet loss due to reloading firewall every minute with IPv6
implementation of certain ISPs.
SVN-Revision: 39332
2014-01-19 17:35:33 +00:00
33dc3f2488
kernel: add usb3 module definitions
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39331
2014-01-19 17:27:40 +00:00
ebaa3817a7
ralink: activate xhci config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39330
2014-01-19 17:27:31 +00:00
a818a3cf8f
ralink: backport various fixes from linux-mti
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39329
2014-01-19 17:27:22 +00:00
a75b692557
ralink: add xhci driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39328
2014-01-19 17:27:13 +00:00
2f5f498969
scripts/kconfig.pl: Indicate which file we couldn't open
...
Signed-off-by: Daniel Colascione <dancol@dancol.org>
SVN-Revision: 39327
2014-01-19 17:27:04 +00:00
d513c07d2f
brcm63xx: fix typo breaking build in r39325
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39326
2014-01-19 14:00:18 +00:00
66ec204935
brcm63xx: set usb host port number for some devices
...
Update a few devices with their actual port numbers, especially those
with two ports.
Should allow properly using the second port on the Neufboxen and HW553
and HW556.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39325
2014-01-19 13:46:25 +00:00
ef81c6a268
brcm63xx: allow setting the number of usb host ports for boards
...
Allow setting the number of available usb host ports for boards with
additional sanity checks to allow using the second port on devices
where it is available.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39324
2014-01-19 13:46:14 +00:00
6b3e1c8de6
brcm63xx: add USB support for BCM63268
...
Add and enable USB support for the BCM63268 family of SoCs.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39323
2014-01-19 13:46:05 +00:00
33f426c795
brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI too
...
USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI
and BCM63XX_HAS_OHCI are not selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39322
2014-01-19 13:45:55 +00:00
52b7f55cb3
brcm63xx: prevent usb clock state inconsistency on BCM6318
...
Return the same clock for usbh and usbd on BCM6318 to prevent the clock
getting disabled despite being supposed to be enabled, e.g. by the
following sequence:
clk_enable(usbh); <- usbh->usage = 1, enabled
clk_enable(usbd); <- usbd->usage = 1, enabled (no effect)
clk_disable(usbd); <- usbd->usage = 0, -> disabled!
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
b6e1cbd8dd
generate images for the On Networks N150 (rebranded Netgear WNR612v2)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39320
2014-01-18 19:44:40 +00:00
471095f869
odhcpd: Fix a memory corruption when static leases are used
...
SVN-Revision: 39319
2014-01-18 10:11:03 +00:00
f18112883f
sysupgrade: do not kill any processes in failsafe
...
sysugrade killed the lock causing failsafe to stop
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39318
2014-01-17 22:12:05 +00:00
63a4342568
usbmode: update usb-modeswitch-data version to 20131113
...
https://dev.openwrt.org/ticket/14762
Signed-off-by: Alif M. Ahmad <ama_alif@yahoo.co.id>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39317
2014-01-17 21:45:55 +00:00
cd90b6242c
ubox: update to latest git
...
- fix duplicate device wildcard
- fix elf 64bit elf parsing
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39316
2014-01-17 21:35:32 +00:00
24ba434185
odhcpd: be even less verbose and don't start unnecessary relays
...
SVN-Revision: 39315
2014-01-17 19:05:54 +00:00
2c9d868900
odhcpd: fix logspam
...
SVN-Revision: 39314
2014-01-17 15:53:43 +00:00
17b0d874eb
odhcpd: use hybrid management mode by default
...
SVN-Revision: 39313
2014-01-17 15:48:02 +00:00
9ec0e5df14
dnsmasq: add dnsmasq.d config folder & improve odhcpd coexistence
...
SVN-Revision: 39312
2014-01-17 14:00:09 +00:00
140a5b22d9
odhcp6c: Use sourcerouting by default
...
SVN-Revision: 39311
2014-01-17 14:00:04 +00:00
570eb45f23
odhcp6c: fix several small issues + decrease size
...
SVN-Revision: 39310
2014-01-17 14:00:00 +00:00
32b3aa076c
target: replace 6relayd with odhcpd by default
...
SVN-Revision: 39309
2014-01-17 13:59:55 +00:00
684537f3e7
odhcpd: several bugfixes and improved integration
...
SVN-Revision: 39308
2014-01-17 13:59:51 +00:00
a5ee266cd9
6in4, 6rd, 6to4: Use source-restricted routes by default
...
SVN-Revision: 39307
2014-01-17 13:59:47 +00:00
bc8412b90e
netifd: Add IFUPDATE-flags and use main IPv6 routing table again
...
SVN-Revision: 39306
2014-01-17 13:59:40 +00:00
9e39cd9503
kexec: bump to latest head revision
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39305
2014-01-17 13:57:25 +00:00
0650ce9ec4
brcm63xx: do not add twice the same field to board
...
Changeset r39302 updated a board section and added twice .has_ehci0,
this is not necessary, so fix it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39304
2014-01-16 00:45:19 +00:00
053d596297
lantiq: Add support for Astoria ARV7510PW22
...
This board is pretty similar to ARV752DPW22.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
bf4f1feb7a
brcm63xx: add USB support to BCM6318
...
BCM6318 has a special initialization sequence which involves touching
PLL control registers in the USBH_PRIV register space, as well as
toggling a bit the Simulation control register.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39302
2014-01-15 19:05:57 +00:00
a467c52eca
mvebu: fix build failures when initramfs is not selected
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39301
2014-01-15 18:38:51 +00:00
a844275f37
firewall: improve logging in hotplug script
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 39300
2014-01-15 18:29:59 +00:00
f3a243c3dd
ramips: Add profile for the Edimax BR-6475nD
...
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 39299
2014-01-15 18:29:51 +00:00
beb29461ff
ramips: Add userspace support for the Edimax BR-6475nD
...
The rt2x00 wifi driver may still need updating to
function with this device.
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
62dd252b86
ramips: rt3883: Fix a typo in rt3883.dtsi
...
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 39297
2014-01-15 18:29:03 +00:00
26dcf1c7c9
lantiq: update kernel configuration
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
c87513de6b
packages: ifenslave: add kernel dependencies as source was removed from 3.12
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39295
2014-01-15 09:28:41 +00:00
3114410a13
brcm63xx: fix BCM96318MVWG LEDs
...
Power LED is not active low, and ppp-fail is red, not green.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39294
2014-01-15 00:06:08 +00:00
1f7edcf637
brcm63xx: remove config-3.11
...
This was not supposed to be committed, remove it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39293
2014-01-15 00:05:51 +00:00
bd540554a4
brcm63xx: 96368MVWG supports USB gadget, enable it
...
Enable the use of the USB gadget device at the board level so we can use
bcm63xx_udc on this board.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39292
2014-01-14 23:56:46 +00:00
092a7105ec
brcm63xx: replace gadget driver build fix with upstream submission
...
Also fixing a build warning due to a misplaced parenthesis in the
previous submission.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39291
2014-01-14 23:56:28 +00:00
45e3898a11
gpio-button-hotplug: add wwan button
...
The wimax key will be used as a generic wwan key starting with Linux
3.13. The brcm47xx target uses this key for the 3g buttons. Also remove
the ifdef around KEY_WPS_BUTTON, this is in the kernel for a long time
now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39290
2014-01-14 23:11:10 +00:00
bf662d7cb0
packages: kernel: reverse kernel dependencies logic
...
This will select the correct dependencies also for more recent kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39289
2014-01-14 22:51:30 +00:00
Gabor Juhos
John Crispin
Steven Barth
Jonas Gorski
Imre Kaloz
Florian Fainelli
Luka Perkov
Zoltan Herpai
Hauke Mehrtens