e61cd71564
umbim: remove superflous jshn call
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42467
2014-09-11 12:26:52 +00:00
c9d15fbd59
umbim: update to latest git
...
adds handling for username/password
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42466
2014-09-11 12:26:41 +00:00
7bad68804c
comgt: add directip proto
...
add a proto handler for sierra wireless directip modems
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42465
2014-09-11 12:26:31 +00:00
cc82f93251
config: enable cgroup freezer
...
This option will be enabled by default only when cgroups support is enabled.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42464
2014-09-10 23:15:22 +00:00
02629d8f87
kernel: update 3.14 to 3.14.18
...
Targets were build tested and patches are refreshed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
7be0ed78e7
kernel: remove unused versions
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42462
2014-09-10 13:57:48 +00:00
c772d71d05
atheros: enable the low_mem flag to better deal with 16M RAM devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42460
2014-09-10 13:50:10 +00:00
96b74d4eef
hostapd: add ubus bindings for wps
...
With this patch WPS discovery can be started or canceled over ubus if
WPS is enabled in wireless configuration. This is equivalent of
'hostapd_cli wps_pbc' and 'hostapd_cli wps_cancel' commands.
Signed-off-by: Petar Koretic <petar.koretic@sartura.hr>
SVN-Revision: 42459
2014-09-10 13:01:53 +00:00
1961f8cdb7
ar71xx: ack completed tx descriptors only after the full frame has been completed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42457
2014-09-10 12:56:24 +00:00
2dabf3a775
procd: allow adding empty strings to arrays
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42456
2014-09-10 12:56:19 +00:00
9ccacbaa40
imx6: fix image build for Generic profile.
...
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42455
2014-09-09 21:15:49 +00:00
4ba3d616be
ath9k: fix pll clock initialization on newer soc devices ( fixes #14916 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42453
2014-09-09 08:03:00 +00:00
54cd991725
kernel: drop 3.9 support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42452
2014-09-08 19:55:36 +00:00
eea3a89a6a
gemini: drop kernel 3.9 support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42451
2014-09-08 19:55:00 +00:00
d0d537a039
gemini: switch to kernel 3.10
...
This switches to kernel 3.10 that was prepared by Hauke in r41531 :
gemini: add support for kernel 3.10
This is compile tested only, please run test and report back.
I've simply checked if it still compiles, unfortunately we didn't get
any feedback for this target.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42450
2014-09-08 19:54:22 +00:00
a446681bc6
omap: add kernel 3.14 support
...
It has been compile-tested only so far. Please give it a try.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42449
2014-09-08 19:53:01 +00:00
8313b329c6
kernel: add bcma patches sent upstream but not pushed yet
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42448
2014-09-08 19:50:53 +00:00
e030c50502
kernel: update bcma to the version from wireless-testing master-2014-09-04 tag
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42447
2014-09-08 19:50:11 +00:00
4662c3b847
ralink: dwc_otg->dwc2
...
the old dwc_otg driver is starting to fall apart and fails on newer 3g
modems and some storage devices. switch to the upstream dwc2 driver which
is no longer in staging/.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42446
2014-09-08 17:33:16 +00:00
bdba024c7b
ralink: add dwc2 device_reset() call
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42445
2014-09-08 17:32:52 +00:00
3c5412e6c3
ath9k: add some ani related stability / performance fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42443
2014-09-08 16:45:30 +00:00
76ca87a060
tools: fix mtools/dosfstools related build system warnings
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42442
2014-09-08 16:09:57 +00:00
bd74df01b1
netifd: work-around kernel IPv6 on-link route issue
...
SVN-Revision: 42439
2014-09-08 14:45:56 +00:00
a4eae94a9c
lantiq: add ath9k led pin support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42437
2014-09-08 14:29:18 +00:00
d4a2aa4f92
sunxi: re-add lradc driver in 3.14
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42436
2014-09-08 07:50:03 +00:00
d932a2bd62
tools: build dosfstools and mtools for sunxi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42435
2014-09-07 23:38:03 +00:00
60b81acd60
ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
...
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable. The existing code
however advertieses gigabit capability in the link status word. If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link. This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.
In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.
So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit. This patch implements the
former solution.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
SVN-Revision: 42432
2014-09-07 09:45:32 +00:00
288e50a79c
mac80211: enable DFS support for ath9k/10k by default
...
The DFS pattern detector now supports all three regions; ETSI, FCC and
JP, so there is no reason to not have it enabled anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42431
2014-09-07 09:38:13 +00:00
68fcb15f90
toolchain/binutils: do not install host libiberty.a into target lib dir
...
Binutils target build will pick it up and break build on e.g. arm:
libtool: link: arm-openwrt-linux-uclibcgnueabi-gcc -shared .libs/archive.o .libs/archures.o .libs/bfd.o .libs/bfdio.o .libs/bfdwin.o .libs/cache.o .libs/coffgen.o .libs/corefile.o .libs/format.o .libs/init.o .libs/libbfd.o .libs/opncls.o .libs/reloc.o .libs/section.o .libs/syms.o .libs/targets.o .libs/hash.o .libs/linker.o .libs/srec.o .libs/binary.o .libs/tekhex.o .libs/ihex.o .libs/stabs.o .libs/stab-syms.o .libs/merge.o .libs/dwarf2.o .libs/simple.o .libs/compress.o .libs/verilog.o .libs/elf32-arm.o .libs/elf32.o .libs/elf-nacl.o .libs/elf-vxworks.o .libs/elf.o .libs/elflink.o .libs/elf-attrs.o .libs/elf-strtab.o .libs/elf-eh-frame.o .libs/dwarf1.o .libs/elf32-gen.o .libs/cpu-arm.o -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/build_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/binutils-2.24/bfd/../libiberty/pic -liberty -lz -march=armv5te -mtune=arm926ej-s -mfloat-abi=soft -Wl,-lc -Wl,--as-needed -Wl,-lm -Wl,--no-as-needed -Wl,-soname -Wl,libbfd-2.24.so -o .libs/libbfd-2.24.so
/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib/libiberty.a: could not read symbols: File format not recognized
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42430
2014-09-07 09:38:10 +00:00
60eeadd0ba
ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes ( #13072 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42429
2014-09-06 17:51:48 +00:00
2da2317fed
ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42428
2014-09-06 17:51:44 +00:00
05dd36a980
ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 (improves performance) (patch from #13072 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42427
2014-09-06 17:51:39 +00:00
efa2159e17
atheros: remove linux 3.10
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42426
2014-09-06 17:51:35 +00:00
044bf28357
sunxi: bump kernel to 3.14.16
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42425
2014-09-06 15:59:06 +00:00
b217763e41
sunxi: update pcDuino3 profile to the new u-boot
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42424
2014-09-06 15:57:08 +00:00
6833e90f0c
sunxi: update Bananapi profile to the new u-boot
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42423
2014-09-06 15:23:30 +00:00
14cf28b284
uboot-sunxi: bump to 2014.04
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42422
2014-09-06 15:18:40 +00:00
4ea085316e
uml: bump to 3.14.16
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 42421
2014-09-05 22:02:09 +00:00
c329f79dd4
uclient: update to the latest version, fixes some crash issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42419
2014-09-04 11:25:04 +00:00
d2a420fa22
at91: build images for AT91SAMA5D3XPLAINED
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42418
2014-09-03 03:11:25 +00:00
7175e520e1
at91: add SAMA5D3 subtarget
...
Add a subtarget for Atmel's SAMA5D3 Cortex-A5 based SoCs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42417
2014-09-03 03:11:11 +00:00
00c0f4f27a
at91: move legacy Kconfig options to subtarget
...
Some Kconfig options are only relevant for the legacy platforms, move
them where they belong
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42416
2014-09-03 03:10:59 +00:00
640579bf49
at91: switch to 3.14
...
We need a new kernel version to support Cortex-A5 based platforms such
as SAMA5GD3.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42415
2014-09-03 03:10:47 +00:00
892d571d07
at91: add 3.14 support
...
Add support for Linux 3.14 for the Atmel's AT91 platform.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42414
2014-09-03 03:10:18 +00:00
035f68e858
at91: move 3.10 specific files and patches
...
In preparation for adding 3.14 kernel support, move files and patches to
a separate per-version directory since some of them will have
incompatible changes (e.g: dts)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42413
2014-09-03 03:09:51 +00:00
132676f1ac
at91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42412
2014-09-03 03:09:36 +00:00
5b0e7947e3
at91: add CONFIG_USB_OHCI_HCD_AT91 to usb-ohci
...
The at91 OHCI driver has a separate Kconfig symbol with newer kernels,
include it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42411
2014-09-03 03:09:24 +00:00
5efbc41cbb
at91: fix typo on Calao
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42410
2014-09-03 03:09:14 +00:00
eb9730ddac
include: add Cortex-A5 CPU_TYPE
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42409
2014-09-03 03:09:03 +00:00
c2b92f9ef4
at91: create a legacy subtarget
...
In preparation for adding SAMA5D3 support, move the legacy ARMv5 based
platforms to a separate subtarget.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42408
2014-09-03 03:08:51 +00:00
John Crispin
Luka Perkov
Felix Fietkau
Hauke Mehrtens
Steven Barth
Zoltan Herpai
Jonas Gorski
Nicolas Thill
Florian Fainelli