Commit Graph

11178 Commits (d2329f88f376e1e55d6d0377a27514681568a915)

Author SHA1 Message Date
Imre Kaloz a7322ce397 mark as broken (toolchain issues), bump kernel version
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38665
2013-11-07 09:27:52 +00:00
Luka Perkov b294319215 kirkwood: add support for dockstar
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38664
2013-11-06 19:24:32 +00:00
Gabor Juhos 04fdff9dc0 ar71x: image: don't use the wndr3700 utility
Pass the uImage magic value directly to mkimage instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38662
2013-11-06 10:16:39 +00:00
Luka Perkov ee90339e97 sunxi: drop CONFIG_DEVTMPFS option
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38661
2013-11-06 08:19:31 +00:00
Luka Perkov f14a075cb4 kernel: add some config options
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38660
2013-11-06 08:19:24 +00:00
Gabor Juhos 0c740a80fd ar71xx: image: fix WNDR4300 initramfs image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38659
2013-11-05 18:41:20 +00:00
Gabor Juhos c98db0707c ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38658
2013-11-05 18:41:18 +00:00
Imre Kaloz cc4b946fa2 update for 3.12 final
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38657
2013-11-05 17:46:18 +00:00
Hauke Mehrtens 73ed236907 brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L
This closes #14367 and #14328.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38656
2013-11-05 17:09:19 +00:00
Gabor Juhos 08e0613275 ar71xx: generate recovery image for WNDR4300
Extended the Makefile to generate a working factory reset image
for Netgear WNDR4300. The image uses UBI with two volumes squashfs
(rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot
happy, a fake rootfs image is placed into the last erase block
of the kernel partition.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - restore the NetgearNAND/initramfs macro,
  - remove unused {Squash,Ubi}fsTemplate macros,
  - remove board specific mtd options from CONFIG_CMDLINE, append the
    board specific ubi.mtd parameter to the kernel command line instead,
  - increase kernel partition size to 2MiB,
  - use board specific ini file for ubinize,
  - put jffs2 eof mark into the rootfs_data ubi volume,
  - use KDIR_TMP for temporary images,
  - use the squashfs-raw image,
  - increase kernel partition size to 2MiB,
  - use a local ubinize macro,
  - fix macro parameter comments,
  - put the fake rootfs into the last erase block of the kernel
    partition,
  - move Image/Build/NetgearNAND/buildkernel macro before
    define Image/Build/NetgearNAND,
  - don't use the wndr3700 utility, use '-M' parameter of mkimage to set
    the uImage magic,
  - use '-recovery' suffix for the generated image, it is only usable via
    the fw_recovery function of the bootloader,
  - update commit log]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38655
2013-11-05 16:31:14 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Luka Perkov cb07269988 sunxi: add new target
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38651
2013-11-05 08:00:34 +00:00
Luka Perkov da224973af imx6: drop unused variable from Makefile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38650
2013-11-05 08:00:30 +00:00
Gabor Juhos d5555de5b0 ar71xx: move WNDR4300 profile to the nand subtarget
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38647
2013-11-04 18:37:09 +00:00
Gabor Juhos 3eb676240f ar71xx: Add new subtarget nand for WNDR4300
Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs.
This target will be used for NAND based router which make use of
UBI (and maybe UBIFS later on) in order to provide proper NAND
support.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - tweak target.mk:
     change BOARDNAME variable,
     improve Target/Description,
     remove targz and ubifs from FEATURES and add broken flag,
  - optimize kernel configuration:
     disable ubifs, it is not used yet,
     disable unused MTD options,
     disable SPI support
     disable unused network drivers,
     tune kernel command line,
  - remove image/ubinize.cfg, it will be in a follow-up patch
  - move profile modifications into a separate patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38646
2013-11-04 18:37:08 +00:00
Gabor Juhos 496d3e1149 ar71xx: remove yaffs from the generic rootfstype list
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38645
2013-11-04 18:37:07 +00:00
Gabor Juhos ccf7320205 ar71xx: image: dd root.* images in fs specific macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38644
2013-11-04 18:37:06 +00:00
Gabor Juhos 5dba0a237e kernel/3.1[02]: move MTD root device setup code to mtdcore
The current code only allows to automatically set
root device on MTD partitions. Move the code to MTD
core to allow to use it with all MTD devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38643
2013-11-04 18:37:05 +00:00
Gabor Juhos 866dd2a378 kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38642
2013-11-04 18:37:03 +00:00
Hauke Mehrtens c30346c2e1 kernel: add some config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38640
2013-11-03 20:20:14 +00:00
Hauke Mehrtens 24d73fbd33 kernel: bgmac: update backport patch
This adds some more bgmac patches from mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38637
2013-11-03 19:24:39 +00:00
Gabor Juhos 45d26941b4 ar71xx: image: only define profiles for the generic subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38636
2013-11-01 18:33:24 +00:00
Gabor Juhos f0a877e5eb ar71xx: image: add IMAGE_PROFILE variable
Ensures that the 'Default' images are generated
even if the subtarget has no profiles.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38635
2013-11-01 18:33:22 +00:00
Gabor Juhos b2bc45d21e ar71xx: always enable hw ecc support for the ar934x-nfc module
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38634
2013-11-01 18:33:18 +00:00
Hauke Mehrtens 0e655122c6 kernel: add missing config options
The buildbots found some new missing config options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38633
2013-11-01 08:49:35 +00:00
Luka Perkov e00bc81a56 kirkwood: add userland support for Pogoplug E02
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38631
2013-10-31 12:04:04 +00:00
Luka Perkov 2b0fa00da8 kirkwood: add Pogoplug E02 Kernel support
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38630
2013-10-31 12:04:02 +00:00
Luka Perkov 6f26ef8b5d kirkwood: extend image/Makefile
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38629
2013-10-31 11:44:28 +00:00
Luka Perkov 59d58990fb imx6: minor image cleanup
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38628
2013-10-31 11:44:27 +00:00
Luka Perkov 672a8cd6ba imx6: update patches
Changes include PCI fixes and various upstream pending patches.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38624
2013-10-30 23:31:26 +00:00
Hauke Mehrtens 2ab978d0a3 kernel: add some missing config options
This was spotted by the buildbots.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38604
2013-10-30 09:48:19 +00:00
Gabor Juhos 379b509362 ramips: enable building of TEW-692GR images
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.

Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38603
2013-10-30 07:06:24 +00:00
Gabor Juhos dfd4311355 ramips: fix number of GPIOs for RT3352
The RT3352 SoC only supports 46 GPIO lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38602
2013-10-30 07:06:23 +00:00
Gabor Juhos 9186fb342e ramips: remove trailing whitespaces from .dts{,i} files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38601
2013-10-30 07:06:22 +00:00
Gabor Juhos 715f16806f ar71xx: move subtarget specific features to target.mk
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38600
2013-10-30 06:54:59 +00:00
Gabor Juhos 5a08328197 ar71xx: don't build uImages for the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38598
2013-10-30 06:54:55 +00:00
Gabor Juhos 6357738509 ar71xx: disable non Mikrotik boards in the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38597
2013-10-30 06:54:54 +00:00
Gabor Juhos 228c3484c3 ar71xx: fix Kconfig symbol selection for RB95x/RB2011
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38596
2013-10-30 06:54:53 +00:00
Gabor Juhos 64ea60d210 ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38595
2013-10-30 06:51:02 +00:00
Gabor Juhos 2f27f5d404 generic: mtdsplit_uimage: add uImage magic for the WRN2200 board
Should fix boot failure on the WNR2200 boards.
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38594
2013-10-30 06:51:01 +00:00
Gabor Juhos 47b7ce5ec2 ar71xx: add profile and build image for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - remove MultiProfile, it makes no sense for a single board
  - move SingleProfile call and the mtdlayout to a different
    location keep things sorted (well, almost)]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38593
2013-10-30 06:50:59 +00:00
Gabor Juhos 003a801dd9 ar71xx: add user-space support for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38592
2013-10-30 06:50:58 +00:00
Gabor Juhos ef8306cfd2 ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board
BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip.

Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - rename and refresh kernel patch,
  - fix some checkpatch warnings and adjust whitespaces in
    mach-bhu-bxu2000n2-a.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38591
2013-10-30 06:50:57 +00:00
Gabor Juhos acd4ea62e7 ar71xx: add user space support for the Sitecom WLR-8100 wireless router
Patchwork: http://patchwork.openwrt.org/patch/4148/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38590
2013-10-30 06:50:55 +00:00
Gabor Juhos 22b5040c64 ar71xx: add kernel support for the Sitecom WLR-8100 wireless router
- unsure about copyright message
  - based on AP136-010

Patchwork: http://patchwork.openwrt.org/patch/4147/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[juhosg: rename and refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38589
2013-10-30 06:50:54 +00:00
Gabor Juhos f6638a8994 ar71xx: add profile and build image for the Dragino2 board
Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg: remove kernel+rootfs partition and use uimage split instead]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38588
2013-10-30 06:50:53 +00:00
Gabor Juhos 7074bb286d ar71xx: add kernel support for DRAGINO2
This patch adds support for DRAGINO2 board (used by
Meshpotato v2). Most of the files included can be
found in the official svn repository provided by the
company [1]. I have just adapt it to the last OpenWrt
trunk revision (Fri Oct 4 10:49:47 2013).

 1. http://svn.dragino.com/dragino2

Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg:
 - rename and refresh kernel patch,
 - fix checkpatch warnings in  mach-dragino2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38587
2013-10-30 06:50:52 +00:00
Luka Perkov 6b2c29d5f0 imx6: update gateworks profile with extra packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38579
2013-10-30 00:50:14 +00:00
Luka Perkov df388048b4 imx6: add initial 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38574
2013-10-29 02:19:09 +00:00
Luka Perkov b8038b78ec imx6: use upstream gateworks board names
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38573
2013-10-29 02:19:07 +00:00
Luka Perkov 3aba97dcba kernel: refresh 3.12 patches on -rc7 release
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38572
2013-10-29 02:19:05 +00:00
Luka Perkov f44c65c7c8 imx6: update 3.10 patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38571
2013-10-29 02:19:03 +00:00
Hauke Mehrtens 7b7c06d2e3 kernel: add missing config optinons
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38570
2013-10-28 19:19:28 +00:00
Felix Fietkau 32a2f9a1c3 kernel: jffs2: ignore bad blocks after the end-of-filesystem marker
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38568
2013-10-28 16:06:47 +00:00
John Crispin 176b41d441 ralink: add package for mt7620 sdhci
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38553
2013-10-28 06:47:56 +00:00
John Crispin 36e029b3eb ralink: dont include mt7620 sdhci support inside the kernel
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38552
2013-10-28 06:47:48 +00:00
John Crispin 7c7225a19d ralink: add support for missing mt7620 mux values
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38551
2013-10-28 06:47:39 +00:00
John Crispin 43de7c1cfa ralink: add support for 2 new mt7620 boards made by buffalo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38550
2013-10-28 06:47:31 +00:00
Luka Perkov be95e24155 kernel: fix compile error in 3.12
Upstream commit c655bc6896b94ee0223393f26155c6daf1e2d148 changed number of
arguments in nf_ct_iterate_cleanup() function.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38547
2013-10-27 20:47:04 +00:00
Luka Perkov fde5493acd kernel: add missing 3.12 config symbols
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38546
2013-10-27 20:46:55 +00:00
Luka Perkov 7bacb745dd mvebu: drop patch that has been upstreamed
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38545
2013-10-27 16:08:23 +00:00
John Crispin 849f74f930 ralink: pinctrl fix for non muxed pins
Pins with no mux option failed to be recognized as gpios.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38540
2013-10-26 12:24:55 +00:00
Hauke Mehrtens 40790e6b84 brcm47xx: b44: fix error handling for dummy phy creation
When the mdio bus is unregistered the newly created phy will also be
unregistered and freed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38539
2013-10-25 21:12:48 +00:00
Hauke Mehrtens c185d48b7c brcm47xx: b44: add dummy phy device if we do not find any
On some devices with e.g. a BCM2535F switch the second MAC is used, but
we can not find a phy under all addresses between 0 and 31, 0xffffffff
is returned as phy id. If we can not find a phy at the expected address
create a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38538
2013-10-25 21:02:13 +00:00
Florian Fainelli 61a4b9753d malta: add kernel configuration for 3.12
Boot tested using QEMU

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38536
2013-10-25 01:48:29 +00:00
Florian Fainelli 531d2b7aae kernel: handle Cavium Octeon Kconfig rename
Upstream commit 9ddebc46 ("MIPS: OCTEON: Rename Kconfig
CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC") renamed a Kconfig
symbol, thus making all MIPS builds ask for this specific Kconfig
symbol, add it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38535
2013-10-25 01:48:20 +00:00
Florian Fainelli 2333212ace kernel: add some missing 3.12 config symbols
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38532
2013-10-25 01:47:54 +00:00
Imre Kaloz e72c7e17a4 preliminary 3.12 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38528
2013-10-24 13:50:11 +00:00
Florian Fainelli 857a7a0124 kernel: make swconfig checkpath compliant
Fix the warnings and errors reported by checkpatch on swconfig.c

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38523
2013-10-24 00:25:52 +00:00
Luka Perkov a494a0027a imx6: ventana boards use kmod-sky2
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38522
2013-10-23 23:12:59 +00:00
Luka Perkov 37c040f41a imx6: use more descriptive function name
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38521
2013-10-23 22:55:00 +00:00
Luka Perkov de7c615cfe imx6: use more common name for ubi(fs) images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38520
2013-10-23 22:54:59 +00:00
Luka Perkov 9e17f251d5 imx6: fix pcie interrupt mapping
The interrupt mapping for legacy interrupts was backwards causing interrupts
to be mapped improperly behind a PCIe to PCI bridge (ie GW16082 mezzanine).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38519
2013-10-23 22:26:54 +00:00
Luka Perkov 2f4ae98018 imx6: add support for building uImage
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38518
2013-10-23 22:16:12 +00:00
Luka Perkov 7938d16451 build: make MkuImage more generic
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38516
2013-10-23 22:16:09 +00:00
Luka Perkov 86aff32701 imx6: enable SATA support
Enable SATA support (for IMX6D/IMX6Q) static in the kernel.  It seems there
are some issues causing the driver to not load properly when built as
a module which still need to be worked out.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38515
2013-10-23 22:16:08 +00:00
Luka Perkov 44ae9a2b7a imx6: enable cpufreq
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38514
2013-10-23 22:16:07 +00:00
Luka Perkov 70d75dc068 imx6: enable i2c-dev
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38513
2013-10-23 22:16:06 +00:00
Luka Perkov cdcce432d0 imx6: remove obsolete files
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38512
2013-10-23 22:16:05 +00:00
Luka Perkov cd43416a78 imx6: pcie driver fixups
Add upstream patches needed for PCIe through a switch.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38511
2013-10-23 22:16:03 +00:00
Luka Perkov a0c9c711cd imx6: fix symlink of dtb files
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38510
2013-10-23 20:21:27 +00:00
Gabor Juhos 9e01011b5c ar71xx: rename 'nand' subtarget to 'mikrotik'
It is for Mikrotik devices only, rename the subtarget
to reflect that. Also fix the wget2nand script to use
the new image names.

Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38509
2013-10-23 15:43:26 +00:00
Gabor Juhos 757a6fdef9 ar71xx: change title and description for NAND subtarget
The nand subtarget supports Mikrotik boards only. Change
the title and the description to reflect that.

Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38508
2013-10-23 15:43:19 +00:00
Gabor Juhos a59934dbd0 ar71xx: remove 'Target/Description' from main Makefile
Ensure that menuconfig shows the correct help text for
subtargets.

Based on the patch by Stefan Agner:
http://patchwork.openwrt.org/patch/4123/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38507
2013-10-23 15:43:13 +00:00
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens 6d2136c3f2 brcm47xx: b44: detect external phy by bit set in DevControl register
Without this patch we treated only phy addr 30 as an external phy, but
there is a register to check that. Now we do not have to try to reset
the switch to check for an external switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38502
2013-10-22 21:01:35 +00:00
Gabor Juhos 5d4cc68b66 x86/generic: remove 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38501
2013-10-22 19:00:25 +00:00
Gabor Juhos b94f8452cb x86/generic: switch to 3.10.15
Based on 'kernel: update x86 generic to 3.10.13' patch
from http://patchwork.openwrt.org/patch/4129/

Signed-off-by: Ulrich Weber <uw@xyne.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38500
2013-10-22 19:00:22 +00:00
Gabor Juhos 921246f73b x86/generic: add kernel config for 3.10
Based on 'kernel: update x86 generic to 3.10.13' patch
from http://patchwork.openwrt.org/patch/4129/

Signed-off-by: Ulrich Weber <uw@xyne.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38499
2013-10-22 19:00:20 +00:00
Gabor Juhos 2a3df11af8 kernel/3.10: add missing config symbol
Based on 'kernel: update x86 generic to 3.10.13' patch
from http://patchwork.openwrt.org/patch/4129/

Signed-off-by: Ulrich Weber <uw@xyne.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38498
2013-10-22 19:00:19 +00:00
Luka Perkov 38aefbfa8d imx6: make symlinks for dtb's
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38496
2013-10-22 17:13:18 +00:00
Gabor Juhos 80a15fe8ad ar71xx: Fix sysupgrades for Allnet and OpenMesh devices
Both Allnet and OpenMesh sysupgrade uses fw_setenv from uboot-envtools to
change different settings in the uboot environment. uboot-envtools version
2013.01 introduced a filesystem lock "/var/lock/fw_printenv.lock" to guarantee
mutually exclusive access to the uboot environment. But the path /var doesn't
exist on the sysupgrade ramfs.

An upgrade on these devices fails since r36033 ("[package] uboot-envtools:
upgrade to version 2013.01.01") with following messages:

 Error opening lock file /var/lock/fw_printenv.lock
 failed to update U-Boot environment

Creating the "/var/lock" path before running fw_setenv is therefore a
requirement unless the locking functionality in fw_setenv is removed or
replaced with optional locking.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38483
2013-10-20 15:59:05 +00:00
Gabor Juhos 68e13de37d ar71xx: fix WLAN 5 GHz LED init on dir-825-c1
Fixes the 5 GHz LED.

The same function has no effect on the 2.4 GHz LED at all, so we might
as well remove it.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38482
2013-10-20 15:59:04 +00:00
Jo-Philipp Wich e855d498e3 x86: fix condition in base-files.mk
TARGET_x86_generic_Soekris48xx is not defined,
CONFIG_TARGET_x86_generic_Soekris48xx is

This changes makes it possible to override the network config for soekris net48xx
and net45xx targets.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 38450
2013-10-18 11:45:33 +00:00
Luka Perkov ee5b7c2859 imx6: reorganize build system
Changes include:

 * switching to profiles
 * adding ubifs support
 * building image for GW54XX board

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38441
2013-10-18 00:02:45 +00:00
Luka Perkov 59eb6137dd build: drop FIT option until we actually need it
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38439
2013-10-17 15:45:41 +00:00
Felix Fietkau 0b57c1ccc6 x86: Update kernel for alix2 to 3.10.15
Without this patch, the patch
target/linux/generic/patches-3.10/770-bgmac-backport.patch
would not apply.

Signed-off-by: Tobias Steinicke <tsteinicke@net.t-labs.tu-berlin.de>

SVN-Revision: 38438
2013-10-17 14:03:11 +00:00
Luka Perkov 416d58a3d6 imx6: fix file names when building images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38434
2013-10-17 11:54:52 +00:00
Luka Perkov 0102284bbd imx6: enable FIT images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38432
2013-10-16 21:23:27 +00:00
Luka Perkov acdb0ac35c build: move mkits.sh script to more common place
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38430
2013-10-16 10:29:50 +00:00
Luka Perkov 39ba5482d0 imx6: enable fixed voltage reulator
Fixed voltage regulator support is required by several drivers that have
regulator consumers, such as the sgtl5000 audio codec used on many i.MX6
boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38426
2013-10-16 03:25:58 +00:00
Luka Perkov 0a0ac79cb7 imx6: add support for gw52xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 * i.MX6DL 512MB DDR3
 * 256MB NAND FLASH
 * 2x PCIe
 * 1x USB EHCI (to PCIe socket2)
 * 1x USB OTG (to front panel or PCIe socket1)
 * 1x uSD
 * LVDS
 * HDMI AudioVideo out
 * Analog Video in
 * Digital IO
 * Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38425
2013-10-16 03:25:57 +00:00
Luka Perkov 365ed4d22f imx6: dts: update ventana dts
- fix spi chipselect for GW5400-A
- fix audmux pinctrl for GW54xx
- remove unused alias nodes
- remove unused regulator nodes (will be adding pmic nodes next)
- remove duplicate eeprom entries
- add regulator definitions
- fix sgtl5000 regulator reference
- add egalax touchscreen controller interrupt
- fix gw5400-a audmux pinctrl
- fix usb ehci alias

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38424
2013-10-16 03:25:55 +00:00
Luka Perkov 662e3943ff imx6: split out ventana init patch from devicetree
SVN-Revision: 38423
2013-10-16 03:25:54 +00:00
Luka Perkov adb70acecb imx6: add pfuze100 regulator support
- backport driver
- apply patch to allow misprogrammed parts
- enable driver in kernel

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38422
2013-10-16 03:25:52 +00:00
Luka Perkov 88590e4cb7 imx6: minor (cosmetic) changes in uci-defaults
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38421
2013-10-16 03:25:51 +00:00
Luka Perkov 3365d89817 imx6: add back bootargs
They make our life easier when testing ramdisk images.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38420
2013-10-16 03:25:49 +00:00
John Crispin 9a97c56535 ralink: fix default vlan mapping for MT7620a_MT7610e
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38418
2013-10-15 14:56:49 +00:00
Felix Fietkau 21fe2b7c5b mpc85xx: revert the napi polling code to the one from an older kernel version to fix stability issues (#14020)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38409
2013-10-15 11:20:06 +00:00
Zoltan Herpai d75f9ca58a imx23: build DCP crypto co-processor support by default
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38408
2013-10-14 22:43:50 +00:00
Zoltan Herpai 9e2b69139b mxs: add support for I2SE Duckbill devices
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38407
2013-10-14 21:22:40 +00:00
Zoltan Herpai bea9d64f4a mxs: improve image generation support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38406
2013-10-14 21:00:01 +00:00
Zoltan Herpai fed363b6be mxs: enable device tree support in /proc
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38405
2013-10-14 19:53:06 +00:00
Luka Perkov ad7564142d kirkwood: drop 3.3.x kernel version
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38404
2013-10-14 19:46:45 +00:00
Luka Perkov 73246d2f64 kirkwood: upgrade to 3.10.15
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38402
2013-10-14 19:46:40 +00:00
Zoltan Herpai 07043a853a imx23: rename imx23 to mxs for upcoming imx23/28 support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38394
2013-10-14 19:01:23 +00:00
Hauke Mehrtens f023c09699 brcm47xx: activate ARP daemon support
This just add some bytes to the kernel and is activated on other targets.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38388
2013-10-13 22:46:18 +00:00
Hauke Mehrtens dd3f451d55 cobalt: do not build userland with support for mips1
Without specifying -march gcc uses -march=mips1 by default, but that
causes problems when compiling openssl. Use -march=r5000 instead to
compile a userland optimized for the CPU used on this device.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38386
2013-10-13 22:10:57 +00:00
Hauke Mehrtens 81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
Hauke Mehrtens 551a250e58 brcm47xx: fix detection of some boards
This adds some more boards.

This fixes parts of #14316 and #14133.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38383
2013-10-13 19:27:24 +00:00
Vasilis Tsiligiannis aac26bfbca ar71xx: Fix sysupgrade when upgrading to images with small rootfs partition
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>

SVN-Revision: 38382
2013-10-13 18:39:09 +00:00
Luka Perkov 8c2f571ddd kirkwood: enable appended dtb (3.10.x)
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38379
2013-10-13 03:35:13 +00:00
Luka Perkov c808a4a7ef ubifs: enable building modular images
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38375
2013-10-12 21:44:48 +00:00
Jonas Gorski 06382c5b15 ar7: drop linux 3.9 support
Linux 3.9 is EOL since quite a while, no need to keep support for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38370
2013-10-12 10:50:47 +00:00
Jonas Gorski 5ba5efcd9b ar7: add support for linux 3.10 and switch to it
Run tested on WAG354Gv2.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38369
2013-10-12 10:50:44 +00:00
Jonas Gorski c08dc5bffa mvswitch: fix compilation for linux 3.10
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38368
2013-10-12 10:50:39 +00:00
Imre Kaloz 5f272ca813 make the generated images actually flashable on the Unifi devices.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38364
2013-10-11 15:41:42 +00:00
Jo-Philipp Wich 0c2ce3f37a x86: kvm: disable squashfs and jffs2 images by default
SVN-Revision: 38355
2013-10-10 14:40:52 +00:00
Hauke Mehrtens a05d20a60f kernel: add default config for ARM_ERRATA symbols for kernel 3.3
Commit r37470 did not add a default conig for the ARM_ERRATA symbols for kernel 3.3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38352
2013-10-10 11:13:54 +00:00
John Crispin b93e5498ae ralink: fixes mpr a1/a2 network setup
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38348
2013-10-09 10:08:52 +00:00
John Crispin e382d2c7e6 ralink: add support for the mt7530 eval board
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38345
2013-10-08 21:10:15 +00:00
John Crispin 697bb191b0 ralink: add missing header file to mt7530 driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38344
2013-10-08 21:10:00 +00:00
John Crispin 654dfb1784 lantiq: fix up diag.sh
init no longer exists as a parameter

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38342
2013-10-08 15:28:33 +00:00
John Crispin 715b62ebad lantiq: experia v8 fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38328
2013-10-07 15:03:00 +00:00
John Crispin 81fb43d2f1 lantiq: fix fritz3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38327
2013-10-07 15:02:56 +00:00
John Crispin ae225124c6 lantiq: fix fritz image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38326
2013-10-07 15:02:52 +00:00
John Crispin 1398a5d849 lantiq: fix eva partition split for squashfs
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38325
2013-10-07 15:02:48 +00:00
John Crispin c903de043e ralink: fix asiarf image generation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38324
2013-10-07 15:02:44 +00:00
John Crispin ddcb800018 ralink: split mt7530 driver out of the gsw driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38323
2013-10-07 15:02:39 +00:00
John Crispin c077698e38 ralink: build recovery images for dcs930 ip cam
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38322
2013-10-07 15:02:35 +00:00
John Crispin 420c62205b ralink: DIR610A1 Fix remaining issues
This patch fixes:

 - Ethernet and Wireless LEDs
 - Wireless MAC Address
 - Remove whitespaces from dts file

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 38321
2013-10-07 15:02:31 +00:00
John Crispin 5eacfc1c60 ralink: MT7620 eval board pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38320
2013-10-07 15:02:27 +00:00
John Crispin cc58dd26d3 ralink: make cevt systick selectable via kconfig
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38319
2013-10-07 15:02:23 +00:00
John Crispin baf9d53792 ralink: fix mt7620a pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38318
2013-10-07 15:02:18 +00:00
Hauke Mehrtens 64c2bc256c brcm47xx: Cocci spatch "noderef"
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>

SVN-Revision: 38312
2013-10-07 00:01:01 +00:00
Hauke Mehrtens 2402f8a9ee brcm47xx: move clock detection patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38311
2013-10-07 00:00:10 +00:00
Hauke Mehrtens 4c193a30ce brcm47xx: move and rename nvram gpio patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38310
2013-10-06 23:57:11 +00:00
Hauke Mehrtens b201818044 brcm47xx: update early printk patches
Early printk was disabled because it caused hangs on some devices, the
old patches were using the CFE console now we use the normal serial
console, it is at a constant address.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38309
2013-10-06 23:55:35 +00:00
Hauke Mehrtens ebf0778721 brcm47xx: update board detection patches
Add patches like they are currently in the mainline mips tree and add
some more pending patches for board detection.

* Now the board name is shown under machine in /proc/cpuinfo.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38308
2013-10-06 23:51:24 +00:00
Hauke Mehrtens 53a2c19c69 kernel: b53: add switch name into printk when it fails.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38307
2013-10-06 22:35:28 +00:00
Hauke Mehrtens 2c5e4aa6ad brcm47xx: b44: fix some problems with the phy
* do not try initialize a unused phy
* some improvements to the phylib patch
* do not turn the phy off when mac is off

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38306
2013-10-06 18:31:32 +00:00
Luka Perkov fa3ab0c237 kirkwood: add support for UBI (3.10.x)
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38301
2013-10-04 03:45:52 +00:00
Luka Perkov 60dd4429b7 imx6: update upstream pcie patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38298
2013-10-03 13:06:42 +00:00
Luka Perkov 5617993e10 kirkwood: enable dts compilation
In 3.10 we might build those, so for now just add this functionality.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38297
2013-10-03 02:50:03 +00:00
Luka Perkov a30df8987d kirkwood: fix initramfs images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38296
2013-10-03 02:50:02 +00:00
Luka Perkov 38936426f7 kirkwood: update patches and configuration (3.10)
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38295
2013-10-03 02:50:00 +00:00
Hauke Mehrtens 97b15fc45b brcm47xx: add support for ipv6 in default network config
Modify /etc/init.d/netconfig to use UCI defaults for building the
default network config, which includes appropriate defaults for IPV6.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38294
2013-10-02 23:22:18 +00:00
Hauke Mehrtens 9e5eeb3c38 kernel: bgmac: fix BCM4707 patch
The bool logic was the wrong way around.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38292
2013-10-02 23:12:46 +00:00
Hauke Mehrtens 101034fa23 kernel: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38291
2013-10-02 22:26:43 +00:00
Hauke Mehrtens fa839274b0 kernel: bcma: update to wireless-testing master-2013-10-01
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38290
2013-10-02 22:26:15 +00:00
Hauke Mehrtens 125fc703bb kernel: bgmac: move other bgmac patches to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38289
2013-10-02 22:25:26 +00:00
Hauke Mehrtens 06c8b90ebf kernel: bgmac: move bgmac patches already applied in mainline kernel to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
These are only the patches already applied in current net-next/master
branch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38288
2013-10-02 22:24:01 +00:00
Luka Perkov 8f1499c448 imx6: add default profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38282
2013-10-02 00:33:49 +00:00
Luka Perkov 0eb732c659 kirkwood: drop PROFILE from image names
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38281
2013-10-02 00:33:48 +00:00
Luka Perkov 0331657a4f kirkwood: add linux 3.10 support
Backport appropriate patches to allow using device tree only board
defintions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38280
2013-10-02 00:33:47 +00:00
Luka Perkov 7d1e5ae918 kirkwood: prepare for 3.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38279
2013-10-02 00:33:45 +00:00
Luka Perkov 914ca3cb55 kirkwood: explicitly set CPU_TYPE to xscale
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38278
2013-10-02 00:33:43 +00:00
Hauke Mehrtens 20513fedf2 ep93xx: fix kmod-input-keyboard-ep93xx dependencies
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38275
2013-10-01 22:39:28 +00:00
Hauke Mehrtens 1158f22b02 ep93xx: fix sound dependencies for ep93xx
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38274
2013-10-01 22:38:40 +00:00
Hauke Mehrtens e28d2b88ea at91: fix missing drivers/iio/adc/at91-adc.ko in kmod-at91-adc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38273
2013-10-01 22:37:17 +00:00
John Crispin 4f3797386f lantiq: add support for VGV7519 KPN Experia box v8
Signed-off-by: Maikel Bloemendal <mbloemendal@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38266
2013-09-30 20:48:46 +00:00
John Crispin 65bb48cf23 ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38265
2013-09-30 20:48:39 +00:00
John Crispin 52fe1211b3 ralink: fix DIR-320-B1 board detection
https://dev.openwrt.org/ticket/14226

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38264
2013-09-30 20:48:34 +00:00
John Crispin 396cb4f405 ralink: Change size of image for DIR-320 B1 to 8MB
http://patchwork.openwrt.org/patch/4102/

Signed-off-by: Vladimir Stolyarov <xakep6666@yandex.ru>

SVN-Revision: 38263
2013-09-30 20:48:27 +00:00
Felix Fietkau a5e85d5a3e kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38246
2013-09-27 21:12:19 +00:00
Felix Fietkau 3e2aa6105c octeon: remove CONFIG_FW_LOADER override to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38244
2013-09-27 21:12:12 +00:00
Felix Fietkau bff3637d24 lantiq: add a default for CONFIG_MTD_NAND_XWAY to fix build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38243
2013-09-27 21:12:08 +00:00
Felix Fietkau 50ae6314d8 kernel: add another missing symbol for iio
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38241
2013-09-27 21:12:01 +00:00
Felix Fietkau 08a232c8cf kernel: add missing symbols for iio on older kernel versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38240
2013-09-27 20:54:00 +00:00
Gabor Juhos 7815af409a ar71xx: ar934x-nfc: disable subpage write when hardware ECC is used
It is not supported by the controller.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38234
2013-09-27 11:15:34 +00:00
Luka Perkov 5da90c4e1f imx6: enable cpufreq-imx6q by default
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38233
2013-09-27 10:49:37 +00:00
Luka Perkov b5e56bd31f mvebu: enable thermal module by default
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38232
2013-09-27 10:49:36 +00:00
Luka Perkov 03051c1442 imx6: enable thermal module by default
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38231
2013-09-27 10:49:35 +00:00
Luka Perkov 8ec28437c3 imx6: backport thermal driver
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38229
2013-09-27 10:49:28 +00:00
Gabor Juhos 9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Luka Perkov 1d89a89667 mvebu: add myself as maintainer
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38226
2013-09-27 01:52:29 +00:00
Luka Perkov d0603d6615 mvebu: drop 3.8 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38225
2013-09-27 01:52:28 +00:00
Luka Perkov a0848b5884 mvebu: switch to 3.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38224
2013-09-27 01:52:26 +00:00
Luka Perkov d3c3919a85 mvebu: add 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38223
2013-09-27 01:52:25 +00:00
Luka Perkov 4fa3e3aae9 build: fix typo
vfp3 should be named vfpv3

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38222
2013-09-26 22:43:06 +00:00
Florian Fainelli 6bbb5272ad rb532: fix initramfs image creation (#14215)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38219
2013-09-26 19:16:19 +00:00
Gabor Juhos 8d4eb18740 kernel/3.10: use backported patch for PMC SPI flash support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38218
2013-09-26 18:01:57 +00:00
Gabor Juhos 396c3b023e kernel/3.10: add '003-11-' prefix for patches backported from 3.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38217
2013-09-26 18:01:49 +00:00
Gabor Juhos 5847ec55ab kernel/3.9: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38216
2013-09-26 17:58:17 +00:00
Gabor Juhos 4562eb875b kernel/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38215
2013-09-26 17:58:16 +00:00
Felix Fietkau 0db9125157 build: unify powerpc target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38213
2013-09-26 17:53:28 +00:00
Felix Fietkau ef68210f93 build: unify x86 target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38212
2013-09-26 17:53:24 +00:00
Felix Fietkau c8609ab4f8 build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
2013-09-26 17:53:20 +00:00
Felix Fietkau a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Luka Perkov 907d0f76b7 imx6: enable XZ_DEC_BCJ and XZ_DEC_ARM
squashfs is unable to decompress some blocks without that:

[    1.880530] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.887268] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.893889] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.900636] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.907275] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[    1.913994] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[    1.920631] SQUASHFS error: Unable to read page, block bc77a, size 14c50

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38202
2013-09-25 23:35:55 +00:00
Luka Perkov 2d1775dafc imx6: fix spi on gw5400-a
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38201
2013-09-25 23:35:54 +00:00
Hauke Mehrtens 6910cb4d6f bcm53xx: bgmac: use srab switch driver
use the srab switch driver on these SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38200
2013-09-25 21:49:12 +00:00
Hauke Mehrtens 0bdc137636 bcm53xx: update bgmac driver
Update the bgmac driver with the patches already used for bcm47xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38199
2013-09-25 21:47:25 +00:00
Hauke Mehrtens c75a970337 kernel: b53: add Register Access Bridge Registers (SRAB) interface
The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38198
2013-09-25 21:44:28 +00:00
Gabor Juhos fc79d210e0 kernel: create firmware partition from MyLoader partition parser
This is in preparation for sysupgrade support for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38197
2013-09-25 20:13:12 +00:00
Gabor Juhos 942e69b166 avr32: optimize image generation
- remove the kernel+rootfs partitions from the MTD partition map,
 - use a temporary directory for intermediate image files,
 - append the root squashfs directly to the kernel,
 - don't hardcode uImage size in the jffs2 images,

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38194
2013-09-25 19:32:34 +00:00
Gabor Juhos 11e4e6ebfb avr32: enable the new mtdsplit code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38193
2013-09-25 19:32:33 +00:00
Gabor Juhos b71c7d8d3c ar71xx: use correct board id for TL-MR3040 v2
Fix the image building code so that the kernel correctly
distinguishes between hardware revisions.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38192
2013-09-25 18:42:14 +00:00
Gabor Juhos 164cd38b41 ar71xx: add user-space support for TL-MR3040 v2
Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38191
2013-09-25 18:42:11 +00:00
Gabor Juhos f8aef84e49 ar71xx: improve kernel support for the TL-MR3040 v2
This patch adds support for the hardware slide switch on
the TL-MR3040 v2.

Signed-off-by: Mads Hansen <d@taba.se>
[juhosg: use EV_SW instead of EV_KEY]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38190
2013-09-25 18:42:10 +00:00
Luka Perkov 77d075aa54 imx6: add support for gw51xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 - i.MX6DL 512MB DDR3
 - 256MB NAND FLASH
 - 1x PCIe
 - 1x USB EHCI (to PCIe socket)
 - 1x USB OTG
 - HDMI out
 - Analog Video in
 - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38189
2013-09-25 18:07:24 +00:00
Luka Perkov f55d0ff66c imx6: add support for gw54xx
The Gateworks GW54xx family of products is based on the Freescale
i.MX6Q SoC and offers a large variety of peripherals such as:

  - i.MX6Q 1GB DDR3 (standard)
  - 256MB NAND FLASH (standard)
  - 6x PCIe (3x with USB)
    - Optional expansion for additional USB/PCI based periperhals
  - 1x USB EHCI
  - 1x USB OTG
  - HDMI Audio/Video in/out
  - Analog Video in/out
  - Analog Audio in/out
  - Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38188
2013-09-25 18:07:20 +00:00
Gabor Juhos 7530971113 package/kernel: add support for industrial-io and AD799x
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
Luka Perkov cbcd3024dc imx6: update gw5400-a dts cleanup
- remove dead code
- alphabatize

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38184
2013-09-25 17:55:38 +00:00
Gabor Juhos 8daeba6d47 atheros: fix kernel warning about usage of reset gpio
During a reset the gpiolib warns about using the reset gpio
without explicit requesting it before:

[  147.930000] ------------[ cut here ]------------
[  147.930000] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x68/0xcc()
[  147.930000] autorequest GPIO-5
[  147.930000] Modules linked in: ath5k ath mac80211 ipv6 cfg80211 compat arc4 crypto_blkcipher aead gpio_button_hotplug
[  147.930000] Call Trace:
[  147.930000] [<8004e3bc>] dump_stack+0x8/0x34
[  147.930000] [<80058430>] warn_slowpath_common+0x78/0xa4
[  147.930000] [<800584e4>] warn_slowpath_fmt+0x2c/0x38
[  147.930000] [<80166f18>] gpio_ensure_requested+0x68/0xcc
[  147.930000] [<80167264>] gpio_direction_output+0xdc/0x168
[  147.930000] [<8004aba8>] ar2315_restart+0x28/0x54
[  147.930000] [<80069778>] sys_reboot+0x178/0x1c0
[  147.930000] [<80043670>] stack_done+0x20/0x40
[  147.930000]
[  147.930000] ---[ end trace 2c7a53d8549562d6 ]---

This is fixed with this patch by using another gpiolib api call
which includes the missing request.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38183
2013-09-25 17:51:12 +00:00
Gabor Juhos 0380904acb kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Gabor Juhos 76a1617063 ramips: sync 3.10 configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38181
2013-09-25 16:39:23 +00:00
Gabor Juhos 482b5f34e5 lantiq/3.10: unbreak the mtd-split patch
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38180
2013-09-25 16:22:04 +00:00
Gabor Juhos 1bd2b56081 kernel/3.10: add upstream commit id to the backported hso patches
Also remove the internal patch numbers.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38179
2013-09-25 14:38:57 +00:00
Gabor Juhos 443072fda7 kernel/3.10: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38178
2013-09-25 14:38:56 +00:00
Gabor Juhos 87fb2dad70 avr32: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38175
2013-09-25 13:34:52 +00:00
Gabor Juhos 816820575b avr32: switch to 3.10
It works:
    _______                     ________        __
   |       |.-----.-----.-----.|  |  |  |.----.|  |_
   |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
   |_______||   __|_____|__|__||________||__|  |____|
            |__| W I R E L E S S   F R E E D O M
   -----------------------------------------------------
   BARRIER BREAKER (Bleeding Edge, r38163)
   -----------------------------------------------------
    * 1/2 oz Galliano         Pour all ingredients into
    * 4 oz cold Coffee        an irish coffee mug filled
    * 1 1/2 oz Dark Rum      with crushed ice. Stir.
    * 2 tsp. Creme de Cacao
   -----------------------------------------------------
  root@OpenWrt:/# uname -a
  Linux OpenWrt 3.10.12 #1 Tue Sep 24 18:47:12 CEST 2013 avr32 GNU/Linux
  root@OpenWrt:/# cat /proc/cpuinfo
  processor       : 0
  chip type       : AT32AP700x revision C
  cpu arch        : AVR32B revision 1
  cpu core        : AP7 revision 0
  cpu MHz         : 140.000
  i-cache         : 16K (4 ways x 128 sets x 32)
  d-cache         : 16K (4 ways x 128 sets x 32)
  features        : dsp simd ocd perfctr java
  bogomips        : 281.23
  root@OpenWrt:/#

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38174
2013-09-25 13:34:51 +00:00
Gabor Juhos b8d09278a1 avr32: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38173
2013-09-25 13:33:49 +00:00
Steven Barth d6c62705fb uml: work around mangled parameter handling for ubd
SVN-Revision: 38166
2013-09-24 13:36:42 +00:00
Steven Barth 31f654396a uml: fix some kernel compilation issues with GCC
SVN-Revision: 38165
2013-09-24 13:36:38 +00:00
Steven Barth 777e69451d uml: work-around console issue with procd
SVN-Revision: 38164
2013-09-24 13:36:33 +00:00
Gabor Juhos 5016b6513c ppc44x: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38163
2013-09-24 13:17:48 +00:00
Gabor Juhos 059d90e6f6 ppc44x: switch to 3.10
Compile tested only. The target is marked as
broken since 16 months so the kernel version
does not matter too much.

The target is scheduled for removal.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38162
2013-09-24 13:17:47 +00:00
Gabor Juhos 4356a214eb ppc44x: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38161
2013-09-24 13:17:46 +00:00
Gabor Juhos 521f5df589 rb532: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38160
2013-09-24 13:17:45 +00:00
Gabor Juhos 58fbd3ce5c rb532: switch 3.10
Compile tested only. The target is marked as
broken since 9 months so the kernel version
does not matter too much.

The target is scheduled for removal.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38159
2013-09-24 13:17:43 +00:00
Gabor Juhos 2f05e1f6d6 rb532: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38158
2013-09-24 13:17:42 +00:00
Gabor Juhos 13ec78c18f rb532: image: fix broken ifneq statement
Fixes the following build error:

  /devel/openwrt/staging_dir/host/bin/patch-cmdline \
  /devel/openwrt/build_dir/target-mipsel_uClibc-0.9.33.2/linux-rb532/vmlinux-initramfs \
  'root=/dev/mtdblock1 rootfstype=yaffs2 '
  Could not open kernel imagemake[5]: *** [install] Error 255

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38157
2013-09-24 13:17:39 +00:00
Gabor Juhos 91e1fa6d70 rb532: remove trailing whitespaces from image/Makefile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38156
2013-09-24 13:17:38 +00:00
Gabor Juhos 904ffa32d8 ar71xx: image: simplify mynet_n600_mtdlayout
Remove the kernel and rootfs partitions. The Seama
parser can find those automatically:

  0x000000070000-0x000000ff0000 : "firmware"
  2 seama-fw partitions found on MTD device firmware
  0x000000070000-0x0000001b0000 : "kernel"
  0x0000001b0000-0x000000ff0000 : "rootfs"
  mtd: partition "rootfs" set to be root filesystem
  1 squashfs-split partitions found on MTD device rootfs
  0x000000360000-0x000000ff0000 : "rootfs_data"
  0x000000ff0000-0x000001000000 : "radiocfg"

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38155
2013-09-24 12:19:57 +00:00
Gabor Juhos 2f5694398d ar71xx: enable the Seama firmware parser
It will be used for the WD My Net N600 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38154
2013-09-24 12:19:54 +00:00
Gabor Juhos 2ea3cac075 ar71xx: update the Image/Build/WZRHP macro
- append the root squashfs directly after the kernel,
 - use the 64kraw/128kraw template instead of the 64k/128k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on WZR-HP-G300NH and WZR-600DHP boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38153
2013-09-24 09:36:26 +00:00
Gabor Juhos d0ba5d1584 ar71xx: image: use a common macro for Buffalo WZRHP devices
The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros
are similar. Move the common stuff into the Image/Build/WZRHP
macro and update the orignal macros to use that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38152
2013-09-24 09:36:25 +00:00
Gabor Juhos 370405bfd0 ar71xx: image: update Image/Build/CameoAP94 macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a TEW-673GRU board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38151
2013-09-24 08:14:44 +00:00
Gabor Juhos 167c4b5fa7 ar71xx: image: use a common macro for Cameo AP94 based devices
The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros
are identical. Merge those into a new Image/Build/CameoAP94
macro, and update the device profiles to use the new macro.
Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38150
2013-09-24 08:14:43 +00:00
Gabor Juhos fe525cd2c0 ar71xx: image: use the board name for temporary mtdpart files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38149
2013-09-24 06:13:14 +00:00
Gabor Juhos 5da3667d79 ar71xx: update the Image/Build/UBNT2 macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k,
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on a WispStation M5 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38148
2013-09-24 05:58:34 +00:00
Gabor Juhos 18141628dc ar71xx: build intramfs images for the Ubiquiti XM boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38147
2013-09-24 05:58:32 +00:00
Gabor Juhos 4fc427e211 ar71xx: image: use a common macro for UBNTXM/UBNTDEV
The firmware generation part is the same for both
macros. Move that into a separate macro and use the
new macro for Image/Build/UB{NTXM,DEV}.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38146
2013-09-24 05:58:31 +00:00
Gabor Juhos 0b09a89340 ar71xx: image: update Image/Build/WHRHPG300N macro
- append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the WHR-G301N board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38141
2013-09-23 19:49:27 +00:00
Gabor Juhos 0264fed9bd ar71xx: image use the 64kraw template for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38140
2013-09-23 12:54:05 +00:00
Gabor Juhos 7c8c366a14 ar71xx: image: update Build/Image/Planex macro
- remove the 'kernel' and 'rootfs' partitions from the mtd layout,
 - move the .okli image into the uImage,
 - append the root squashfs directly after the kernel,
 - use the 64kraw template instead of the 64k
 - ensure that the generated images have enough erase blocks
   for JFFS2 garbage collection,

Tested on the MZK-W300NH board only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38139
2013-09-23 12:14:20 +00:00
Gabor Juhos 58e3d03ae0 ar71xx: image: allow to build initramfs for Planex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38138
2013-09-23 12:14:19 +00:00
Gabor Juhos 0ff5dc2f38 ar71xx: image: build Planex kernels in a separate step
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38137
2013-09-23 12:14:18 +00:00
Gabor Juhos cdda5b041f ar71xx: add profile and build image for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38133
2013-09-23 09:49:04 +00:00