Commit Graph

11178 Commits (d2329f88f376e1e55d6d0377a27514681568a915)

Author SHA1 Message Date
John Crispin d203784841 ralink: add asoc modules
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39016
2013-12-09 17:29:14 +00:00
John Crispin be10895651 ralink: add partially working asoc driver. codec is not fully functional yet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39015
2013-12-09 17:29:08 +00:00
John Crispin 231eca9375 ralink: add helper that identifies the mt7620 ECO
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39014
2013-12-09 17:29:03 +00:00
John Crispin 833943b410 ralink: add dma engine support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39013
2013-12-09 17:28:43 +00:00
Luka Perkov c8753ca97c imx6: add support for GW53xx
The Gateworks GW53xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 * i.MX6DL
 * NAND FLASH
 * 4x PCIe
 * 4x USB EHCI (1x front-panel; 3x PCIe sockets)
 * 1x USB OTG
 * 1x uSD
 * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch)
 * HDMI Audio/Video out
 * Analog Video in
 * Digital IO
 * Gateworks System Controller
 * Accelerometer
 * Canbus
 * Optional GPS
 * Industrial temp (-40C to +85C)
 * DC input voltage 8 to 42V (Passive PoE and 802.3af)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39012
2013-12-09 11:30:23 +00:00
Luka Perkov 7523aa05c1 imx6: add DMA/SDMA support for 3.12
DMA and SDMA support are needed for ssi based audio.  Note that the sdma
firmware is no longer required for ssi audio.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39011
2013-12-09 11:30:22 +00:00
Luka Perkov c9ee51ad38 imx6: drop upstreamed patch
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39010
2013-12-09 11:30:20 +00:00
Luka Perkov 47d1215dc7 kernel: added defines for 3.12
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39009
2013-12-09 11:30:19 +00:00
Felix Fietkau 7a260c3620 ath9k: merge initval and tx gain table updates, calibration fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39001
2013-12-08 14:48:30 +00:00
Jo-Philipp Wich 7d725aab9a generic: workaround arptables arpt_arp structure padding issue (#14577)
Linaro GCC 4.6-2013.05 incorrectly pads the arpt_arp structure on
at least the ar71xx target, resulting in a two bytes shorter struct
in the kernel compared to what arptables userspace expects.

When comparing sizeof(struct arpt_arp) in kernel and userspace, the
former yields 162 byte, while the latter is 164 byte.

As a consequence, the subsequent target_offset and next_offset
members of the parent arpt_entry structure contain invalid values
when processed by the arptables binary, leading to bad memory
accesses in the populate_cache() procedure, subsequently causing a
segfault.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 38999
2013-12-06 15:42:35 +00:00
Jo-Philipp Wich 21ee73c920 generic: fix occasional "execvp: /bin/sh: Argument list too long" is kernel header install phase (#12907)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 38998
2013-12-06 15:37:55 +00:00
Hauke Mehrtens 94f7ae90f8 brcm47xx: misc cleanups
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38980
2013-12-01 18:12:57 +00:00
Hauke Mehrtens c48f285147 brcm47xx: deactivate mips wait instruction only for BCM4706
The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38979
2013-12-01 18:05:08 +00:00
Hauke Mehrtens cbbfc5f1e6 brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE
This sets both values to the OpenWrt default values. There is no reason
to use some brcm47xx specific values here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38978
2013-12-01 17:34:27 +00:00
Hauke Mehrtens 3fb7e8b851 brcm47xx: add vectored interrupts
This adds support for vectored interrupts in this SoC.
This is supported by the 74K cpus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38975
2013-12-01 16:37:58 +00:00
Hauke Mehrtens 25ca004f24 brcm47xx: add cpu overwrites
bcm47xx misses cpu overwrites for the features of the CPUs used in
these SoCs.
Instead of manually checking, it is now known at compile time for some
options and the compiler is able to remove the checks and optimize the
code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38974
2013-12-01 16:36:38 +00:00
Hauke Mehrtens d7ebbd0ac7 brcm47xx: use "firmware" partition name
Some time ago, after switching to the mainline bcm47xxpart driver
following patch has been applied:

commit 03cef8725d2062335ffc3de50fc037b294fd458c
Author: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date:   Sat Apr 6 22:22:26 2013 +0000

    brcm47xx: use old partition names again for kernel 3.8

    This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

    Thank you russell for spotting this problem.

I propose to revert this change and make sysupgrade use "firmware"
instead. This makes brcm47xx compatible with widely used ar71xx and
after all "firmware" sounds like a much better name for... the firmware.

This change doesn't affect "sysupgrade" usage, because it never takes a
partition name as a parameter. This change only affects users using mtd
tool directly. Hopefully there are not many howtos using "mtd" command.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 38973
2013-12-01 16:32:32 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
Luka Perkov f51d78f4f2 ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38971
2013-11-30 19:48:05 +00:00
Gabor Juhos 9c4c620a11 kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38970
2013-11-30 18:31:10 +00:00
Gabor Juhos e629881e2d ar71xx: update Userspace support for the WA850/WA750
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38969
2013-11-30 18:31:08 +00:00
Gabor Juhos 6688857d39 ar71xx: Update profile for the wa750/wa850 to include rssileds by default
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38968
2013-11-30 18:31:06 +00:00
Gabor Juhos 6ad568902e ar71xx: use cybertan_check_image for image verification on the WRT160NL
That function provides a slightly improved sanity check than the
currently used solution.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38967
2013-11-30 18:31:04 +00:00
Gabor Juhos 1fa75d430a ar71xx: sysupgrade for My Net Wi-Fi Range Extender
This patch enables the convenient sysupgrade feature for
WD's Wi-Fi Range Extender.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4341/
[juhosg:
  - rename 'mynet_rext_check_image' function to 'cybertan_check_image'
    and move that into platform.sh,
  - remove the the model specific 'platform_do_upgrade_mynet_rext' function,
  - drop the mynet-rext.sh script,
  - remove the image/Makefile change,
  - update commit message]
[christian:
  - check all 8 bytes of the firmware/device magic]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38966
2013-11-30 18:31:03 +00:00
Gabor Juhos 3674062469 ar71xx: image: unify CyberTAN macros
Make the Image/Build/CyberTAN macro more generic,
and use simple wrappers for the GZIP/LZMA variants.
This simplifies the Makefile a bit, and allows to
build sysupgrade images for the devices which are
using LZMA compressed uImages.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38965
2013-11-30 18:31:01 +00:00
Gabor Juhos cb67115b4c ar71xx: image: fix CyberTAN sysupgrade images
In the current sysupgrade images, the CRC32 value of
the TRX header covers the whole rootfs data. Due to
this, the CRC value should be changed during sysupgrade
otherwise the bootloader refuses to load the image on
the next boot.

Change the image generation to create sysupgrade images
where the CRC32 value covers the kernel data only. This
allows to skip the 'fixtrx' step during sysupgrade on
the target.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38964
2013-11-30 18:30:59 +00:00
John Crispin 2370126b9b ramips: Fix initial network configuration for few boards
Argus ATP52B:      ethernet didn't work because of unconfigured switch
Sparklan WCR150GN: add switch config and make single port to be LAN
Dlink DIR-645:     seems to be a redundant case

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38960
2013-11-30 08:36:56 +00:00
John Crispin f8fe6a090a ramips: Fix dts typos
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 38959
2013-11-30 08:36:47 +00:00
Gabor Juhos a6ecce827a ar71xx: build image for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38958
2013-11-29 20:51:16 +00:00
Gabor Juhos 7db7757bf2 ar71xx: add user-space support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38956
2013-11-29 20:51:13 +00:00
Gabor Juhos bc2d7b8193 ar71xx: add kernel support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38955
2013-11-29 20:51:12 +00:00
Gabor Juhos fd892350c2 ar71xx: add profile and build image for the Sitecom WLR-8100
- partitions on factory fw are a bit strange
  - unknown contained some strings in factory
  - unknown2 contains some atheros (2nd art ?)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4149/
[juhosg: edit commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38954
2013-11-29 20:18:50 +00:00
Gabor Juhos a0ad2a0f86 ar71xx: fix switch port map for the Sitecom WLR-8100
There was no way to determine a working config, because
the switch (ar8337) was not working previously.

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4470/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38953
2013-11-29 20:18:49 +00:00
Gabor Juhos c378d5e953 generic: ar8216: add AR8337N switch support
This patch is needed to use the switch inside the Sitecom WLR-8100;
it was unusable and detected as Generic-Phy before.

since ar8337 is behaving like ar8327
generally do the same thing
see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218
forward-ported to trunk

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4469/
[juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38952
2013-11-29 20:18:48 +00:00
Gabor Juhos 74a353f64f generic: ar8216: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38951
2013-11-29 20:18:46 +00:00
Gabor Juhos c1fb0e5e39 ar71xx: rssi leds for My Net WiFi Range Extender
The device has three extra LEDs which indicate the quality
of the wireless link. Thanks to rssileds, this feature now
works out of the box.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4462/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38950
2013-11-29 20:18:45 +00:00
Gabor Juhos 981e3b354a ar71xx: improve support for the My Net Wi-Fi Range Extender device
This patch improves support for the device considerably.

1. The wifi didn't work in the initial release. This was because
the WMAC of the AR9340 is not connected to the antennas.
(However, it can pick up wifi signals, if they are strong enough!)
Instead there's a dedicated AR9300 chip on the same board, which
works.

2. Ethernet throughput is improved. iperf shows that the hardware
can sustain more than 200Mbit/s and no longer drops any packages
when the link is under load.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4461/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38949
2013-11-29 20:18:44 +00:00
Gabor Juhos 1167f92ac6 ag71xx: add F1E specific feature bit definitions to AR934X register file
The F1E Phy (AR8035?) requires additional bits to be
set in order to provide a fast and reliable connection
over gigabit links.

When enabled, the link doesn't suffer anymore from a small
package loss under load and the performance is improved
quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4460/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38948
2013-11-29 20:18:43 +00:00
Gabor Juhos cad5257732 ar71xx: user space support update tl-wr842n_v2 add default led support
Small update to uci_defaults/01_leds, to support the usb led

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38947
2013-11-29 20:18:42 +00:00
Gabor Juhos af4873e41c ar71xx: Kernel support update tl-wr842n_v2 added missing usb led
Just a small oversight my part, added the support for the USB led
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38946
2013-11-29 20:18:40 +00:00
Imre Kaloz 08a62d8d8a tunr on some additional features
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38942
2013-11-29 10:58:40 +00:00
Imre Kaloz 5de876bc78 there's no such thing as a soft fpu, this target should be fine without these
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38940
2013-11-29 10:25:43 +00:00
Imre Kaloz 8adb3fb74d initialize wl12xx from the device tree
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38934
2013-11-27 12:51:35 +00:00
Imre Kaloz 9a0d644f9e add device tree based initialization to wl12xx
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38933
2013-11-27 12:40:07 +00:00
Imre Kaloz dcae3ef009 refresh/rename patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38932
2013-11-27 12:34:41 +00:00
Imre Kaloz cf8a186553 fix gpio interrupt-cells property on AM335x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38931
2013-11-27 12:33:06 +00:00
Imre Kaloz c7d102816c refresh patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38930
2013-11-27 12:31:05 +00:00
Imre Kaloz 9100d559b5 make the wl12xx glue code available with compat-wireless, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38929
2013-11-27 12:29:13 +00:00
Imre Kaloz 412b772e24 add TI wireless symbols and enable the platform glue by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38928
2013-11-27 12:25:20 +00:00
John Crispin bb2b428a5c ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38917
2013-11-26 09:51:57 +00:00
John Crispin 6295f38c8f ralink: add mac address detection for Asus RT-G32 b1
http://patchwork.openwrt.org/patch/4463/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38910
2013-11-25 14:09:08 +00:00
John Crispin 93e9a71538 base-files: allow users to delect debug level during boot
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38909
2013-11-25 08:34:55 +00:00
John Crispin 8ee2b91ddd ralink: fix up the mt7530 driver to work properly with gmac2
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38905
2013-11-25 08:34:23 +00:00
John Crispin d84238ad26 ralink: add LRO support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38904
2013-11-25 08:34:12 +00:00
John Crispin f732ed4500 ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38903
2013-11-25 08:34:01 +00:00
John Crispin 5b437e204f ralink: set the mac addr via the dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38902
2013-11-25 08:33:42 +00:00
Luka Perkov 6cbad59ead kirkwood: include ext4 support by default
Several users reported that they would like this feature.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38901
2013-11-24 23:07:34 +00:00
Luka Perkov a48520f0f3 kirkwood: kernel: add missing config option
Buildbot found missing config option for target kirkwood.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 38900
2013-11-24 17:53:34 +00:00
Luka Perkov 770a285ee3 kirkwood: drop unnecessary argument from *_UBIFS_OPTS variables
The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38898
2013-11-23 15:55:12 +00:00
Luka Perkov 746ace4baf kirkwood: add support for iomega iconnect
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net>

SVN-Revision: 38897
2013-11-23 15:55:10 +00:00
Imre Kaloz c11bd50d77 For now vdi and vmdk images should be x86 only
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38896
2013-11-22 14:39:53 +00:00
Imre Kaloz 4242b42880 VMWare and VirtualBox images should select what they need, not depend on it..
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38892
2013-11-22 09:54:36 +00:00
Imre Kaloz 4c65eebf06 rationalize target image options
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38891
2013-11-22 09:44:14 +00:00
John Crispin 776c6c50ce lantiq: move patch to proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38884
2013-11-20 17:53:36 +00:00
John Crispin d823c20f05 lantiq: update default mii modes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38881
2013-11-20 16:56:58 +00:00
John Crispin 06ada4b10f lantiq: fix an endless loop in the vmmc platform code
this was caused by not honoured error return codes of of_gpio_count()

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38878
2013-11-20 16:56:32 +00:00
Zoltan Herpai 2bc70cfbac mxs: build/profile-related changes - change uImage creation to use zImage - update image Makefile for further boards with u-boot support - add profile for OLinuXino Micro/Nano boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38876
2013-11-20 10:23:49 +00:00
John Crispin d175740783 ralink: set wmr-300 mac properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38872
2013-11-19 21:13:24 +00:00
John Crispin 40109bb89b ralink: add missing CONFIG_ symbol to mt7620n
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38867
2013-11-19 16:33:43 +00:00
Felix Fietkau 17e6b3ae8d mpc85xx: Fix NAPI poll mechanism in GIANFAR ethernet driver
This patch fixes the NAPI poll mechanism in the GIANFAR ethernet driver, which
was not properly working since Linus Kernel Version 3,8.
Therefore the workaround patch to downgrade the GIANFAR ethernet driver to
Kernelversion v3.8 is obsoete.
This patch was extensivly testes with different network loads and types of
traffic. There is quite a substantial user base that reports proper Ethernet
function with TPlink-4900. This patch is based on the fixes from GINAFAR
maintainer Claudiu Manoli.

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38865
2013-11-19 13:00:37 +00:00
Luka Perkov 35b6be4a65 imx6: build images for ventana boards that are supported
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38859
2013-11-18 22:23:43 +00:00
Luka Perkov c108ddb209 imx6: merge all gateworks boards into one profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38858
2013-11-18 22:23:42 +00:00
Luka Perkov f552d290c6 imx6: add support for more then one nand type per profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38857
2013-11-18 22:23:40 +00:00
Luka Perkov 69beb313c6 imx6: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38856
2013-11-18 22:23:39 +00:00
Imre Kaloz d38c28b58c make default packages selected for real
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38850
2013-11-18 12:05:11 +00:00
John Crispin 82e6242798 ralink: add support for ralink mt7620 nand eval board
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38848
2013-11-18 09:35:41 +00:00
John Crispin a17e5159ac ralink: improve mt7620n detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38847
2013-11-18 09:35:32 +00:00
John Crispin f307b35c8b ralink: add mt7620 nand driver
This is a minor rework of the SDK driver. This driver needs a full rewrite.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38846
2013-11-18 09:35:23 +00:00
John Crispin 9d4eb0ac91 ralink: make all none 3x5x boards default to a vlan1/2 setup
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38845
2013-11-18 09:35:14 +00:00
John Crispin 3d547b740a ralink: make usb work on the mt7530 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38844
2013-11-18 09:34:46 +00:00
Hauke Mehrtens f4cd36d825 at91: fix typo in network file
This closes #14474.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38842
2013-11-17 17:14:32 +00:00
Hauke Mehrtens 6d4132b7a4 kirkwood: add missing kernel config CONFIG_REGMAP=y
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 38837
2013-11-17 16:05:09 +00:00
Hauke Mehrtens eea5c0b166 kernel: backport get_cycles() fix
get_cycles() is used in some places as one part of the seed for the
kernel PRNG.

This backports the following commit from mainline linux kernel:
9c9b415c50bc298ac61412dff856eae2f54889ee

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38834
2013-11-17 15:52:14 +00:00
John Crispin 269cbfa06a ralink: add mt7620n dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38829
2013-11-17 13:22:01 +00:00
John Crispin 5c2e867460 ramips: fix wmr300 network detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38828
2013-11-17 13:14:46 +00:00
Zoltan Herpai 9269e58b2a kernel: add fix to block2mtd driver for modified error logging
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38827
2013-11-17 11:57:57 +00:00
Zoltan Herpai 3a99e895ff kernel: add missing symbols for 3.12
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38826
2013-11-17 11:55:23 +00:00
John Crispin dce9b292bf ralink: add mt7620n support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38823
2013-11-16 20:28:52 +00:00
Zoltan Herpai c4d8ddf1dc kernel: add missing symbols for 3.12
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38820
2013-11-16 11:52:30 +00:00
Luka Perkov dd0e3a58c6 sunxi: remove old kernel config after 3.12 upgrade (r38811)
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38819
2013-11-16 10:17:38 +00:00
Imre Kaloz e4eef7e620 replace the TI patch with a smaller patchset
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38816
2013-11-15 12:23:17 +00:00
Gabor Juhos 1f34789015 ar71xx: add profile for the WR842N/ND v2
Patch to add the profile for the TP-LINK WR842N/ND v2
Small update, because of a change in the Makefile.

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4382/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38815
2013-11-15 10:11:25 +00:00
Gabor Juhos ed036155ee ar71xx: add user space support for the TL-WR842N/ND v2
Patch to add the user space support for the TL-WR842N/ND v2

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4354/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38814
2013-11-15 10:11:24 +00:00
Gabor Juhos 625cf61c5b ar71xx: Add kernel support for the WR842N/ND v2
Patch to add kernel support for the TP-LINK WR842N/ND v2

Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4352/
[juhosg: refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38813
2013-11-15 10:11:20 +00:00
Gabor Juhos 67eded254a ar71xx: wndr4300: set official mac addresses
Get the factory assigned mac addresses stored in the caldata
partition and asign them to lan and wan interfaces. Also put
the correct mac addresses into the WiFi eeprom files to ensure
that the ath9k driver will use the correct ones.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Patchwork: http://patchwork.openwrt.org/patch/4350/
[juhosg:
  - move WiFi MAC address setup to the firmware hotplug file,
  - use the official MAC address for the 2.4GHz as well,
  - remove uci-defaults.sh modifications,
  - update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38812
2013-11-15 08:21:59 +00:00
Zoltan Herpai f58bfd1df4 sunxi: rework target - update kernel to 3.12 - add patches for clocks, i2c, usb, sid, rtc - support common image for A10/A13/A20 - add support for a couple boards - most drivers are configured into the kernel as of now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38811
2013-11-14 23:12:52 +00:00
Felix Fietkau 2077361f12 kernel: backport an upstream fix to improve TCP performance for wifi drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38810
2013-11-14 22:01:24 +00:00
Felix Fietkau ff17114ba1 ar71xx: Unifi AP Pro sysupgrade patch
The current implementation of mtd will not append the backup
file created by sysupgrade to the correct partition, as mtd will append
the data to first jffs2 partition it finds. As the kernel is also
stored on a jffs2 partition (which resides before the overlay
partition), the data will be appended to this partition.

To fix this problem, a new option

-s <number>             skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"

is added to mtd.

Signed-off-by: Peter Wagner <tripolar@gmx.at>

SVN-Revision: 38807
2013-11-14 19:38:54 +00:00
Felix Fietkau 9aca892304 ramips: use dd bs=4096k instead of bs=4M to make it more portable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38806
2013-11-14 19:16:04 +00:00
Felix Fietkau f38e6c782c ar71xx: use the new padjffs2 padding on Ubiquiti UAP-PRO to make the boot loader stop searching after the kernel partition
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38805
2013-11-14 19:04:48 +00:00