Commit Graph

588 Commits (cbfca35c76d9c0140680ff24fc9b0dc2d8a4428f)

Author SHA1 Message Date
Florian Fainelli dd8b0f9fb9 more bcm63xx definition fixes, thanks AndyI
SVN-Revision: 17227
2009-08-11 18:50:07 +00:00
Florian Fainelli 85698765da add support for the Pirelli AG226G board (#5337)
SVN-Revision: 17190
2009-08-09 10:19:47 +00:00
Florian Fainelli 2d629e3a01 remove useless hard reset in the SPI controller driver
SVN-Revision: 17189
2009-08-09 10:18:30 +00:00
Florian Fainelli 2437f53f1d fix assignment instead of comparison in the mtd driver (#5649)
SVN-Revision: 17188
2009-08-09 10:08:07 +00:00
Florian Fainelli 8866ab8a02 merge upstream fixes for bcm63xx_enet
SVN-Revision: 17175
2009-08-08 11:25:36 +00:00
Florian Fainelli 5138aa203e bcm6345 fixes from AndyI
SVN-Revision: 17153
2009-08-06 20:33:42 +00:00
Florian Fainelli 48c1634d3e fix off-by-one maximum timeout in the wathchdog default counter for bcm6345, thanks AndyI
SVN-Revision: 17149
2009-08-06 18:53:44 +00:00
Florian Fainelli dd78f746a5 disable watchdog for bcm6345 until it gets fixed
SVN-Revision: 17148
2009-08-06 18:44:20 +00:00
Florian Fainelli 39c22483bd fix printing of offsets
SVN-Revision: 17099
2009-08-02 13:50:39 +00:00
Florian Fainelli 85119470d2 add experimental support for 2.6.30.4
SVN-Revision: 17081
2009-08-01 16:56:36 +00:00
Florian Fainelli e58d0f346d more bcm6345 fixes and definitions, thanks to AndyI
SVN-Revision: 17066
2009-07-31 20:15:43 +00:00
Florian Fainelli c5879ba76d refresh 2.6.27 patches
SVN-Revision: 17061
2009-07-31 11:10:20 +00:00
Florian Fainelli 252607a79c update to 2.6.27.29
SVN-Revision: 17060
2009-07-31 11:09:27 +00:00
Florian Fainelli dd622864e1 generate images for RTA1025W_16-based routers (#5594)
SVN-Revision: 17058
2009-07-31 10:47:00 +00:00
Florian Fainelli 9887dc6100 add experimental support for 2.6.28.10, tested on bcm6338
SVN-Revision: 17054
2009-07-30 21:29:25 +00:00
Florian Fainelli 3c806e767e enable 6345 support now that it boots up to user-space
SVN-Revision: 17033
2009-07-27 23:04:58 +00:00
Florian Fainelli dabf5e71a6 fix typo for the flash start address on bcm6345
SVN-Revision: 17032
2009-07-27 22:31:28 +00:00
Florian Fainelli 103c99b960 switch to 2.6.27.28
SVN-Revision: 17027
2009-07-27 10:01:33 +00:00
Florian Fainelli 4d38620058 fix malformed patch
SVN-Revision: 16975
2009-07-25 16:18:02 +00:00
Florian Fainelli 755aae526a bcm6345 does not seem to handle r4k_wait correctly, disable it (#5474)
SVN-Revision: 16971
2009-07-24 20:25:31 +00:00
Florian Fainelli c4d517c7bb use 2.6.27.7
SVN-Revision: 16968
2009-07-24 17:03:03 +00:00
Florian Fainelli 5df0606265 fix typos introduced in 16942
SVN-Revision: 16943
2009-07-21 12:22:01 +00:00
Florian Fainelli 8b17c74376 make the ethernet driver compile with newer kernels
SVN-Revision: 16942
2009-07-21 11:48:08 +00:00
Florian Fainelli 43a3f9555a request irq with the platform driver name instead of bus_id which is being removed in newer kernels
SVN-Revision: 16932
2009-07-20 10:52:08 +00:00
Florian Fainelli a0a85ba7c6 we are using the default-on trigger for power LEDs, no need to change their state from userspace
SVN-Revision: 16892
2009-07-18 09:27:33 +00:00
Florian Fainelli ecad504c39 register GPIO-connected LEDs for known boards
SVN-Revision: 16887
2009-07-18 00:40:23 +00:00
Florian Fainelli fe05e1f37a mask the USB_EHCI_ROOT_HUB_TT symbol since brcm63xx ehci does not implement it at all, fixes usb 2.0 issues on bcm6358
SVN-Revision: 16882
2009-07-17 15:58:06 +00:00
Florian Fainelli d0fdf2c5ed fix comment only valid for bcm6345
SVN-Revision: 16881
2009-07-17 15:57:09 +00:00
Florian Fainelli 349d57eee4 resync kernel configuration and enable kexec
SVN-Revision: 16795
2009-07-12 11:31:00 +00:00
Florian Fainelli 9d2522748f add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big
SVN-Revision: 16709
2009-07-06 11:28:34 +00:00
Florian Fainelli 9a387036d2 add a profile with no Wi-Fi drivers enabled, useful for bcm6338
SVN-Revision: 16708
2009-07-06 11:21:22 +00:00
Florian Fainelli fefeecf52f update to latest 2.6.27.26 stable kernel
SVN-Revision: 16659
2009-07-03 09:31:52 +00:00
Florian Fainelli 0bda624fc7 add the infrastructure to use a MPI/GPIO connected VoIP DSP
SVN-Revision: 16650
2009-07-01 21:00:41 +00:00
Florian Fainelli 8a8943671a fixes for the bcm6338 clocks, thanks Maxime
SVN-Revision: 16640
2009-07-01 13:49:20 +00:00
Florian Fainelli 5a7c5b2d36 a couple of more fixes to get 6345 booting up to the console handover
SVN-Revision: 16636
2009-06-30 13:45:49 +00:00
Florian Fainelli 8179904540 shared DMA zone is twice smaller on 6338
SVN-Revision: 16608
2009-06-28 20:06:44 +00:00
Florian Fainelli e6d307ab4b turn on size optimization for bcm63xx
SVN-Revision: 16607
2009-06-28 20:06:13 +00:00
Florian Fainelli 4096da301d off-by-one gpio numbers for bcm6338
SVN-Revision: 16597
2009-06-28 04:23:11 +00:00
Florian Fainelli 8813961e86 bcm6338 can support PCI since it has MPI
SVN-Revision: 16592
2009-06-27 21:43:55 +00:00
Florian Fainelli ca5de76ed3 more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly
SVN-Revision: 16589
2009-06-27 20:32:43 +00:00
Florian Fainelli d02d75ba02 fix the flash address comment and register the flash device again with its proper physical address on 6338/6345
SVN-Revision: 16587
2009-06-27 18:58:00 +00:00
Florian Fainelli 0bb3a46217 fix a stupid typo preventing the board from being detected
SVN-Revision: 16586
2009-06-27 18:30:45 +00:00
Florian Fainelli bcc1dd7f99 prevent bcm6338 and bcm6345 from crashing very early
SVN-Revision: 16585
2009-06-27 18:23:58 +00:00
Florian Fainelli 7da8855c79 only register fallback sprom and enable PCI if we actually have support for PCI
SVN-Revision: 16581
2009-06-27 16:17:18 +00:00
Florian Fainelli bf0942ce5c do not bloat the kernel with experimental bcm6345 for now
SVN-Revision: 16580
2009-06-27 15:52:03 +00:00
Florian Fainelli 13a8ed9ca0 more missing register definitions for bcm6338
SVN-Revision: 16579
2009-06-27 15:51:27 +00:00
Florian Fainelli 287a2c0ba9 more bcm6338 and bcm6345 related fixes
SVN-Revision: 16568
2009-06-26 12:34:35 +00:00
Florian Fainelli 8c4137900c define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338
SVN-Revision: 16567
2009-06-26 11:08:12 +00:00
Florian Fainelli 45c25ff988 generate images for the bcm6338w
SVN-Revision: 16566
2009-06-26 10:27:37 +00:00
Florian Fainelli e86e91380a add board definitions for the bcm6338w
SVN-Revision: 16565
2009-06-26 10:27:13 +00:00
Florian Fainelli 1795111337 add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364)
SVN-Revision: 16506
2009-06-18 15:00:32 +00:00
Florian Fainelli 606193fc1f generate experimental images for bcm6338 boards, thanks to Daniel Dickinson
SVN-Revision: 16490
2009-06-17 13:16:59 +00:00
Florian Fainelli a68fe5655e use 2.6.27.5
SVN-Revision: 16486
2009-06-17 08:46:47 +00:00
Imre Kaloz c83b031b84 use the same i/o schedulers for all targets
SVN-Revision: 16479
2009-06-15 20:43:02 +00:00
Florian Fainelli cc12508ee3 use build system REVISION variable (#5317)
SVN-Revision: 16400
2009-06-10 13:43:48 +00:00
Florian Fainelli ca16accfbb The attached patch adds building of firmware images for more routers based on the brcm63xx chipset.
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>

SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
Florian Fainelli e9c22f7939 cleanup the watchdog driver a bit
SVN-Revision: 16395
2009-06-09 21:35:51 +00:00
Florian Fainelli 972619416e fix the watchdog driver and enable it by default
SVN-Revision: 16394
2009-06-09 21:28:15 +00:00
Florian Fainelli 01118457e8 rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).
SVN-Revision: 16393
2009-06-09 08:04:52 +00:00
Florian Fainelli 4f72fef05e remove this line which got accidentaly succesfully applied, but should not have (#5285)
SVN-Revision: 16380
2009-06-08 13:42:11 +00:00
Florian Fainelli 8f84508c25 fix ethernet driver removal
SVN-Revision: 16335
2009-06-04 10:04:53 +00:00
Florian Fainelli 50936e1aa5 fix pcmcia device removal
SVN-Revision: 16334
2009-06-04 10:04:11 +00:00
Florian Fainelli 116a53a154 add missing null entry in pcmcia driver
SVN-Revision: 16333
2009-06-04 10:03:41 +00:00
Florian Fainelli 4049592268 request gpio pins and set direction correctly for pcmcia
SVN-Revision: 16332
2009-06-04 10:03:03 +00:00
Florian Fainelli 287a0efd68 be SMP safe even with gpiolib
SVN-Revision: 16331
2009-06-04 10:02:23 +00:00
Florian Fainelli 9013e936ed cache gpio values in gpio_set
SVN-Revision: 16330
2009-06-04 10:01:55 +00:00
Florian Fainelli 1208ffaedb use the correct number of GPIOs for bcm6358
SVN-Revision: 16329
2009-06-04 10:01:03 +00:00
Florian Fainelli c95420f06d register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
SVN-Revision: 16328
2009-06-04 09:59:28 +00:00
Florian Fainelli d2b2ce325a merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU.
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.

SVN-Revision: 16302
2009-06-03 08:55:18 +00:00
Florian Fainelli 05b40c8d13 backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
SVN-Revision: 16277
2009-06-01 18:27:51 +00:00
Florian Fainelli 9be0df0caa include wpa-supplicant iw in the default profile
SVN-Revision: 16195
2009-05-29 15:33:14 +00:00
Florian Fainelli 027d6ac4c5 also include the SPI driver in the gw6x00 profile
SVN-Revision: 16077
2009-05-26 11:15:27 +00:00
Florian Fainelli a94930dbbb include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking
SVN-Revision: 16075
2009-05-26 10:25:55 +00:00
Florian Fainelli fa45acd690 add the Tecom GW6x00 (6000 and 6200) board profile
SVN-Revision: 16059
2009-05-25 16:14:13 +00:00
Florian Fainelli f150bc5e36 update to new stable 2.6.27.24
SVN-Revision: 15931
2009-05-20 09:00:09 +00:00
Florian Fainelli 1322e2721a disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211
SVN-Revision: 15926
2009-05-19 18:15:19 +00:00
Imre Kaloz e965c02820 even more config file cleanup
SVN-Revision: 15913
2009-05-18 13:21:25 +00:00
Florian Fainelli ce87c61ae9 add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later
SVN-Revision: 15911
2009-05-18 11:11:23 +00:00
Florian Fainelli 0d7f5f8d2c add support for sysupgrade (#5117)
SVN-Revision: 15900
2009-05-17 16:53:57 +00:00
Imre Kaloz 91e866f383 config cleanups
SVN-Revision: 15861
2009-05-15 10:40:04 +00:00
Imre Kaloz 26b42d5807 cardbus != pcmcia -- disable it in b43
SVN-Revision: 15857
2009-05-15 08:58:02 +00:00
Florian Fainelli 480b27e9f9 add missing configuration symbol
SVN-Revision: 15856
2009-05-15 07:04:32 +00:00
Imre Kaloz 6bfddb152f some additional config file cleanup..
SVN-Revision: 15845
2009-05-14 13:32:34 +00:00
Imre Kaloz c83d91fcfc unify congestion control options
SVN-Revision: 15844
2009-05-14 12:42:07 +00:00
Imre Kaloz a9c958c2de make kernels use /etc/preinit by default
SVN-Revision: 15840
2009-05-14 10:20:53 +00:00
Florian Fainelli 01be18725f also supports pcmcia
SVN-Revision: 15693
2009-05-07 15:25:15 +00:00
Imre Kaloz e9b397805d some more kernel config cleanup.. last for today :)
SVN-Revision: 15606
2009-05-04 20:57:02 +00:00
Imre Kaloz 0f2b1d070a more cleanup
SVN-Revision: 15605
2009-05-04 20:31:47 +00:00
Imre Kaloz a614251e6c cleanup MTD option handling
SVN-Revision: 15602
2009-05-04 19:13:43 +00:00
Imre Kaloz 38c5311047 move MFD stuff to the generic kernel configs
SVN-Revision: 15587
2009-05-04 13:51:29 +00:00
Imre Kaloz 64fbade939 refresh patches
SVN-Revision: 15581
2009-05-04 11:35:08 +00:00
Imre Kaloz 86a4a6edb9 upgrade to newest stable kernel versions
SVN-Revision: 15575
2009-05-03 16:58:06 +00:00
Florian Fainelli a036aca55c now that we register gpiodev, also include gpioctl in the default image
SVN-Revision: 15510
2009-04-30 14:09:45 +00:00
Florian Fainelli 9485c3e834 register gpiodev
SVN-Revision: 15509
2009-04-30 14:09:01 +00:00
Florian Fainelli dd2b72105b fix redundant driver name printing in probe function
SVN-Revision: 15254
2009-04-19 13:32:54 +00:00
Florian Fainelli 1f334e3caa make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943)
SVN-Revision: 15253
2009-04-19 13:18:48 +00:00
Felix Fietkau 34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
Florian Fainelli 4bd65101ad do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659)
SVN-Revision: 15215
2009-04-12 12:54:38 +00:00
Florian Fainelli 14832d3c23 some more fixes to the SPI controller driver
SVN-Revision: 15146
2009-04-08 08:52:57 +00:00
Florian Fainelli 5d5c8300b1 imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885)
SVN-Revision: 15133
2009-04-07 13:22:32 +00:00
Florian Fainelli fb3fbea164 override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358
SVN-Revision: 15020
2009-03-24 15:22:07 +00:00
Hauke Mehrtens f5dc2ce0aa refresh patches
SVN-Revision: 15018
2009-03-24 15:09:20 +00:00
Hauke Mehrtens e82dce69a3 update to kernel version 2.6.27.21
SVN-Revision: 15016
2009-03-24 15:05:51 +00:00
Florian Fainelli 501ebb4f74 enable all blocks on 6338 and uart clock on 6345
SVN-Revision: 14957
2009-03-21 10:50:44 +00:00
Florian Fainelli 0972ee5331 add support for bcm6345 SoC, needs testing
SVN-Revision: 14953
2009-03-20 15:08:02 +00:00
Florian Fainelli 32c29f1aaf fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)
SVN-Revision: 14914
2009-03-17 11:28:54 +00:00
Florian Fainelli b865f9b722 add the CFE offset command line option to the imagetag utility, closes (#4366)
SVN-Revision: 14896
2009-03-16 12:29:11 +00:00
Florian Fainelli 6495fa36ea add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
SVN-Revision: 14850
2009-03-12 08:54:04 +00:00
Florian Fainelli 8065eb4a55 do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
SVN-Revision: 14848
2009-03-11 10:32:44 +00:00
Florian Fainelli 51125fb616 make SPI work in full-duplex mode by default
SVN-Revision: 14841
2009-03-10 15:28:29 +00:00
Florian Fainelli add058c382 include kmod-switch in the default images
SVN-Revision: 14827
2009-03-09 21:58:49 +00:00
Florian Fainelli 58a11bcb40 package the bcm63xx-spi driver
SVN-Revision: 14794
2009-03-08 19:21:55 +00:00
Florian Fainelli ae1ed9b7f4 add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
SVN-Revision: 14793
2009-03-08 15:27:46 +00:00
Florian Fainelli 871b0d6fed fix SPI accessors
SVN-Revision: 14792
2009-03-08 14:20:15 +00:00
Florian Fainelli 1bcf5d0de6 fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
SVN-Revision: 14790
2009-03-08 12:43:13 +00:00
Florian Fainelli bf7f2939c2 compile and register SPI controller device
SVN-Revision: 14789
2009-03-08 12:18:26 +00:00
Florian Fainelli 1e92d0355d make bcm6358 consistend with the other boards naming
SVN-Revision: 14788
2009-03-08 12:17:19 +00:00
Florian Fainelli b1abddb45f fix some SPI register definitions and platform-device registration code
SVN-Revision: 14787
2009-03-08 12:13:52 +00:00
Florian Fainelli 5e8dfe53b6 prepare for SPI controller driver
SVN-Revision: 14755
2009-03-06 01:15:00 +00:00
Florian Fainelli 9422b140ba fix SPI register definitions
SVN-Revision: 14754
2009-03-06 01:13:10 +00:00
Florian Fainelli 2d1ed46c68 fix a bcm963xx-flash warning
SVN-Revision: 14730
2009-03-02 18:55:47 +00:00
Florian Fainelli 6f484fc283 provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
SVN-Revision: 14683
2009-02-27 15:48:23 +00:00
Florian Fainelli b539d11497 move the device registration to an earlier initcall level, required for fallback SPROM to work
SVN-Revision: 14681
2009-02-27 15:18:34 +00:00
Felix Fietkau 11014b5cea disable all kernel config options that are set to =m
SVN-Revision: 14611
2009-02-22 04:44:24 +00:00
Hauke Mehrtens 3f085cd501 update to 2.6.28.7 and 2.6.27.19
SVN-Revision: 14601
2009-02-21 18:53:05 +00:00
Gabor Juhos 47665da430 update to 2.6.27.17
SVN-Revision: 14513
2009-02-15 07:47:12 +00:00
Florian Fainelli eda8310293 always select kmod-ssb, pci is supported
SVN-Revision: 14492
2009-02-13 00:13:39 +00:00
Florian Fainelli 99203ed0b1 do not overried 802.1q and PHY kernel configuration symbols
SVN-Revision: 14468
2009-02-10 17:53:52 +00:00
Gabor Juhos 7f04c52b92 update to 2.6.27.15
SVN-Revision: 14440
2009-02-08 12:32:39 +00:00
Florian Fainelli 1fc20f18d4 resync kernel configuration
SVN-Revision: 14395
2009-02-03 19:59:01 +00:00
Florian Fainelli 730346e2d5 add support for user9102 boards (#4537)
SVN-Revision: 14305
2009-01-31 16:01:20 +00:00
Florian Fainelli c2c0d74f67 generate images for old CFE based boards like the Davolink DV201
SVN-Revision: 14264
2009-01-29 14:56:45 +00:00
Florian Fainelli d7cb033a04 Add board definitions for the Davolink DV201AMR
SVN-Revision: 14263
2009-01-29 14:54:13 +00:00
Gabor Juhos 2a0825b4d3 update to 2.6.27.13
SVN-Revision: 14179
2009-01-25 18:33:19 +00:00
Gabor Juhos 0c2e187f54 switch to 2.6.27.12
SVN-Revision: 14157
2009-01-23 13:30:27 +00:00
Florian Fainelli 46b91ed787 frequency is in Hz, thanks Joel
SVN-Revision: 14067
2009-01-17 15:29:36 +00:00
Florian Fainelli 5ce93c07a5 fix SPI register definitions
SVN-Revision: 14048
2009-01-15 22:53:32 +00:00
Florian Fainelli 5905a48169 allow bcm6338 to get the base address of the memory controller register, required to detect memory size
SVN-Revision: 14047
2009-01-15 22:42:22 +00:00
Gabor Juhos 3ca7f3bd6f update to 2.6.27.11
SVN-Revision: 14043
2009-01-15 13:40:35 +00:00
Florian Fainelli 4c7d2cf90e correct SPI register size
SVN-Revision: 13886
2009-01-06 14:49:27 +00:00
Andy Boyett 9f8c82da09 Add hostapd-mini to default images where applicable
SVN-Revision: 13819
2009-01-02 05:12:46 +00:00
Gabor Juhos 8395d01b59 update to 2.6.27.10
SVN-Revision: 13695
2008-12-19 19:25:35 +00:00
Florian Fainelli 85d59fbf8c add board registration of the bcm96338gw
SVN-Revision: 13693
2008-12-19 17:24:29 +00:00
Florian Fainelli 3f7137022d 6338 has no PCI
SVN-Revision: 13692
2008-12-19 17:08:11 +00:00
Florian Fainelli 3dd67d64f4 add experimental support for bcm6338
SVN-Revision: 13691
2008-12-19 17:05:09 +00:00
Florian Fainelli fa5a568380 Register watchdog driver
SVN-Revision: 13690
2008-12-19 15:00:33 +00:00
Florian Fainelli 42ff43386a fix register definitions for bcm6358, thanks SGDA
SVN-Revision: 13688
2008-12-19 10:19:00 +00:00
Florian Fainelli 3ae3bf981e resync kernel configuration
SVN-Revision: 13687
2008-12-19 10:16:52 +00:00
Florian Fainelli 7ab973e1af Add bcm63xx_wdt but do not enable it yet
SVN-Revision: 13677
2008-12-17 14:06:03 +00:00
Gabor Juhos e7336673b1 update to 2.6.27.9 and refresh patches
SVN-Revision: 13659
2008-12-16 10:37:14 +00:00
Florian Fainelli 562ff99c2c Build images for Inventel Livebox
SVN-Revision: 13616
2008-12-12 15:16:57 +00:00
Florian Fainelli 34867901d0 Resync kernel config
SVN-Revision: 13607
2008-12-11 23:16:54 +00:00
Florian Fainelli 4025c12a2d Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348)
SVN-Revision: 13588
2008-12-10 23:57:23 +00:00
Florian Fainelli 4dc65aed63 Add support for Sagem F@ST2404 (#4332)
SVN-Revision: 13583
2008-12-10 16:13:41 +00:00
Florian Fainelli 5dc3098a6c Disable CONFIG_NF_CT_ACCT
SVN-Revision: 13577
2008-12-10 01:39:29 +00:00
Florian Fainelli 6acf4c2a19 Fix remaining bug of the off-by-one error ;)
SVN-Revision: 13551
2008-12-08 21:00:00 +00:00
Florian Fainelli fadddcc655 Enable ohci on bcm96348gw
SVN-Revision: 13549
2008-12-08 16:25:41 +00:00
Florian Fainelli 47050e72be Prepare bcm63xx for SPI master support
SVN-Revision: 13547
2008-12-08 14:14:37 +00:00
Florian Fainelli f3be50a031 Add support for bcm96348gw10 (Netgear DG834GT) (#4319)
SVN-Revision: 13540
2008-12-07 20:34:48 +00:00
Gabor Juhos 4992a87aeb update to 2.6.27.8 and refresh patches
SVN-Revision: 13528
2008-12-06 09:59:55 +00:00
Gabor Juhos 919a8a9fe0 make mips_machine stuff available for other MIPS targets
SVN-Revision: 13492
2008-12-02 21:54:53 +00:00
Florian Fainelli 01a5c953a3 Fix an off-by one printing error
SVN-Revision: 13469
2008-12-02 14:11:54 +00:00
Florian Fainelli 043562037f resync kernel config
SVN-Revision: 13433
2008-11-29 16:33:07 +00:00
Florian Fainelli e8aad7938a Improve Inventel Livebox support
SVN-Revision: 13427
2008-11-29 12:57:41 +00:00
Florian Fainelli aa3c775b65 Reorder profiles numbering, broadcom being the most widely used
SVN-Revision: 13401
2008-11-28 16:35:10 +00:00
Florian Fainelli cc2e43992d bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver
SVN-Revision: 13379
2008-11-27 20:40:03 +00:00
Florian Fainelli bbad86e098 Add missing config symbol for SSB
SVN-Revision: 13378
2008-11-27 20:38:01 +00:00
Florian Fainelli 44108d6a2d Commit changes on the files for gpiolib
SVN-Revision: 13374
2008-11-27 10:38:36 +00:00
Florian Fainelli 36fc2d1f93 Convert brcm63xx to gpiolib
SVN-Revision: 13373
2008-11-27 10:38:01 +00:00
Florian Fainelli 1c77ec0587 Flatten brcm63xx patches, should make our life easier to patch files now ;)
SVN-Revision: 13368
2008-11-26 18:41:01 +00:00
Florian Fainelli 4fc7535fc7 Make 4-port LAN and 1 port wan configurations work
SVN-Revision: 13362
2008-11-26 15:51:55 +00:00
Imre Kaloz 752054346a update to 2.6.27.7
SVN-Revision: 13347
2008-11-25 13:54:46 +00:00
Imre Kaloz a695fa76a4 move THERMAL symbols into the generic config
SVN-Revision: 13346
2008-11-25 13:52:25 +00:00
Florian Fainelli 0f26e35e37 brcm63xx has pcmcia support and is able to run b43 on its pci bus
SVN-Revision: 13303
2008-11-20 23:08:20 +00:00
Florian Fainelli 5acddecc68 Update brcm63xx broadcom profile now that b43 is available
SVN-Revision: 13302
2008-11-20 23:01:48 +00:00
Florian Fainelli 8f5351a4f2 Synchroniz bcm63xx kernel configuration
SVN-Revision: 13300
2008-11-20 22:16:48 +00:00
Florian Fainelli e854a26332 Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
SVN-Revision: 13299
2008-11-20 21:26:11 +00:00
Florian Fainelli 107aa04e06 Generate valid images for the bcm96348gw board
SVN-Revision: 13298
2008-11-20 21:22:45 +00:00
Imre Kaloz 722c78cd1e move some options to the generic 2.6.27 config
SVN-Revision: 13264
2008-11-17 17:28:12 +00:00
Imre Kaloz 7d09c0b086 update to 2.6.27.6
SVN-Revision: 13261
2008-11-17 17:22:30 +00:00
Florian Fainelli 0d4286b0b3 This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201)
SVN-Revision: 13213
2008-11-15 11:30:22 +00:00
Florian Fainelli cb126cd576 Package bcm63xx-pcmcia kernel module and fix compilation
SVN-Revision: 13212
2008-11-15 11:26:23 +00:00
Florian Fainelli 9bbc37d26b Remove old kernel configuration files
SVN-Revision: 13211
2008-11-15 11:23:29 +00:00
Florian Fainelli 517e3d404c Delete old brcm63xx files
SVN-Revision: 13210
2008-11-15 11:21:42 +00:00
Gabor Juhos 88cda758c3 update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193
SVN-Revision: 13192
2008-11-12 17:49:01 +00:00
Nicolas Thill 0a11abc83d add missing kconfig symbols for 2.6.27 targets when all modules are enabled
SVN-Revision: 13178
2008-11-11 02:43:35 +00:00
Felix Fietkau d0388bbe5c brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
SVN-Revision: 13130
2008-11-06 12:52:39 +00:00
Florian Fainelli 7cedaafd0c Add basic support for Inventel Liveboxes, resync kernel config
SVN-Revision: 13108
2008-11-03 20:30:43 +00:00
Florian Fainelli 9aa1d64b91 Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken
SVN-Revision: 13106
2008-11-03 18:52:58 +00:00
Florian Fainelli aa90a702db Use 2.6.27.4 kernel version
SVN-Revision: 13055
2008-10-28 11:19:24 +00:00
Florian Fainelli 30d2200e7d Update targets to 2.6.27.3
SVN-Revision: 13035
2008-10-23 09:11:10 +00:00
Florian Fainelli 28baca91fe Update patches and rename board 9 stands for development board
SVN-Revision: 13024
2008-10-22 09:20:51 +00:00
Florian Fainelli 691e187381 Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
SVN-Revision: 13015
2008-10-20 12:55:28 +00:00
Florian Fainelli 64c28032c8 New Broadcom BCM63xx codebase, huge thanks to Maxime ;)
SVN-Revision: 13001
2008-10-17 22:53:56 +00:00
Florian Fainelli 5718709711 Fix reference to the old and replaced kmod-rt61
SVN-Revision: 12723
2008-09-27 10:47:00 +00:00
Gabor Juhos 821170133f update to 2.6.26.5 and 2.6.25.17
SVN-Revision: 12718
2008-09-26 18:46:53 +00:00
Nicolas Thill 3029c2fd53 disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported
SVN-Revision: 12690
2008-09-24 19:28:53 +00:00
Gabor Juhos 184c6b06f2 update to 2.6.26.3 and 2.6.25.16
SVN-Revision: 12371
2008-08-22 15:37:19 +00:00
Gabor Juhos e5fa05d788 update to 2.6.25.15 and 2.6.26.2
SVN-Revision: 12242
2008-08-07 16:52:52 +00:00
Gabor Juhos 104b3386a2 update to 2.6.25.12
SVN-Revision: 11933
2008-07-26 10:53:23 +00:00
Imre Kaloz 492ba57b56 update targets to 2.6.25.10
SVN-Revision: 11667
2008-07-05 16:52:15 +00:00
Imre Kaloz dee39d10ee upgrade to 2.6.25.9
SVN-Revision: 11584
2008-06-26 14:28:16 +00:00
Gabor Juhos 4af6ac74fb upgrade to 2.6.25.7, and refresh patches
SVN-Revision: 11523
2008-06-17 12:57:04 +00:00
Imre Kaloz 2eb6751084 upgrade to 2.6.25.6
SVN-Revision: 11435
2008-06-11 11:38:39 +00:00
Florian Fainelli 6e0427c8a4 Add bcm3350 cpuid
SVN-Revision: 11364
2008-06-05 16:19:46 +00:00
Gabor Juhos c2619fb5ab revert kernel version to 2.6.25.4
SVN-Revision: 11273
2008-05-27 06:27:16 +00:00
Gabor Juhos ac897ce5b1 refresh kernel patches
SVN-Revision: 11201
2008-05-19 08:33:22 +00:00
Gabor Juhos f9719b35c8 upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19)
SVN-Revision: 11184
2008-05-18 20:12:54 +00:00
Felix Fietkau 12da51bb3c bcm96345: correct some 6345 specific stuff
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11183
2008-05-18 17:32:16 +00:00
Felix Fietkau ab2b78aabd bcm963xx: fix cfe detection
The CFE detection failed to account for zero termination.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11182
2008-05-18 17:32:05 +00:00
Felix Fietkau be49888f6c bcm963xx: add new timer code
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11181
2008-05-18 17:31:55 +00:00
Felix Fietkau f92e4aaf53 bcm963xx: remove obsolete timer code
This removes some code that has been deprecated in kernels >= 2.6.24.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11180
2008-05-18 17:31:45 +00:00
Felix Fietkau 4db60563fc bcm963xx: fix uart isr
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11179
2008-05-18 17:31:35 +00:00
Felix Fietkau ca851edf10 bcm963xx: rewrite irq handling code
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11178
2008-05-18 17:31:25 +00:00
Felix Fietkau 289c41604f bcm963xx: add missing trailing zero to load address
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11177
2008-05-18 17:31:11 +00:00
Felix Fietkau 17d20bb016 bcm963xx: flashmap support
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11176
2008-05-18 17:31:02 +00:00
Felix Fietkau da18b98cff bcm963xx: serial port support
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11175
2008-05-18 17:30:49 +00:00
Felix Fietkau 97b85443eb bcm963xx: board support
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11174
2008-05-18 17:30:39 +00:00
Felix Fietkau f94d5eafc9 bcm963xx: add 2.6.25 configuration file
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11173
2008-05-18 17:30:30 +00:00
Felix Fietkau 8e7ff7a673 bcm963xx: use the 2.6.25.1 kernel
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11172
2008-05-18 17:30:16 +00:00
Felix Fietkau 2dfabe3991 bcm963xx: image generation using image tagger
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
Felix Fietkau 46b4413fbb bcm963xx: fix load address / kernel entry
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11169
2008-05-18 17:29:39 +00:00
Nicolas Thill e3a42b23c6 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
SVN-Revision: 11097
2008-05-09 17:08:51 +00:00
Imre Kaloz 68943e35c2 upgrade to 2.6.24.5
SVN-Revision: 10959
2008-04-28 10:23:36 +00:00
Nicolas Thill c6fe45ed55 properly disable CONFIG_CRYPTO_HW
SVN-Revision: 10952
2008-04-27 12:31:50 +00:00
Florian Fainelli 03f917f26c Delete config-default file and resync kernel configuration for brcm63xx
SVN-Revision: 10790
2008-04-11 14:22:41 +00:00
Florian Fainelli 62240465c4 brcm63xx image generation cleanups (#3169)
SVN-Revision: 10703
2008-04-01 21:10:47 +00:00
Florian Fainelli ebf4eb11e9 Upgrade brcm63xx to 2.6.24
SVN-Revision: 10455
2008-02-13 17:31:17 +00:00
Gabor Juhos 0a72d14e40 resync kernel config
SVN-Revision: 10444
2008-02-11 15:28:45 +00:00
Imre Kaloz 3a0e58b2e1 upgrade & standardize kernel versions
SVN-Revision: 10443
2008-02-11 10:50:40 +00:00
Felix Fietkau 3f7af01bb0 fix initramfs
SVN-Revision: 10080
2008-01-01 21:38:06 +00:00
Felix Fietkau 1bca0cc517 make the image filenames a bit shorter
SVN-Revision: 9533
2007-11-10 23:08:11 +00:00
Nicolas Thill 5f0272d618 move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
SVN-Revision: 8980
2007-09-23 15:12:12 +00:00
Nicolas Thill fec4d9ee3c add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP (closes: #2297, thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
SVN-Revision: 8955
2007-09-22 18:37:24 +00:00
Felix Fietkau 236d7e62ca clean up jffs2 config options
SVN-Revision: 8848
2007-09-19 20:58:16 +00:00
Felix Fietkau 87a88cebc7 adapt profiles for subtarget changes
SVN-Revision: 8695
2007-09-08 20:04:43 +00:00
Felix Fietkau a9d683ca91 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
SVN-Revision: 8694
2007-09-08 19:55:42 +00:00
Felix Fietkau 56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00