ad323881df
ar71xx: fix more image build code whitespace/tab issues
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:49:01 +02:00
8265fdcc4d
imagebuilder: strip DEVICE_ prefix from profiles (FS#55)
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:41:20 +02:00
ed90d50bc4
build: fix image builder profile override (FS#55)
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
3d8c8d5e05
ar71xx: fix tab vs whitespace issue in image building code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
4d0f4f5e52
ar71xx: remove obsolete MultiProfile template code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
32727c409e
mvebu: switch to the new image build code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
60d2620253
kernel: update bcma backporting changes up to 4.8
...
This allows building bcm47xxsflash on ARM.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 13:42:42 +02:00
d12e276cb0
kernel: backport patch for MTD_BCM47XXSFLASH dependency
...
This is required to update bcma without build breakage. One of bcma
patches changes BCMA_SFLASH dependency.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 13:00:14 +02:00
7a175e2d44
ipq806x: clean up redundant initialization of core device image variables
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
b5b2425cba
image.mk: initialize BOARD_NAME and IMAGES, add it to DEVICE_VARS
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
9a50a213d2
image.mk: add support for specifying the VID header offset for UBI
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
cd243b1090
cns3xxx: remove obsolete jffs2 image build code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
eceb6b924a
x86: remove obsolete reference to $(PROFILE)
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
673004f9bc
config: remove options for including kernel/dtb in rootfs
...
These options were a big design flaw to begin with
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
2b4d21a3e6
mxs: unconditionally install kernel images/dtb files into rootfs (needed by boards)
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
650afe412b
kirkwood: remove obsolete code for including kernel/dtb in rootfs
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
edea59fd99
omap: remove obsolete code for including kernel/dtb in rootfs
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
1625e57772
omap: remove obsolete kernel version support
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
0538bbdc4d
kirkwood: remove obsolete ubinize.cfg file
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
5d4b044955
kirkwood: clean up redundant variables in the image building code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
cfd1ef4b90
kirkwood: get rid of useless ubifs/ubi option variables
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
ab92f57684
lantiq: convert remaining xway NAND devices to new image build code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
f12e964733
lantiq: convert AVM xrx200 devices to new image build code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
bdfed2a2c3
lantiq: convert simple xrx200 devices to new image build code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
22c0206044
lantiq: add image build template for NAND devices
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
8058e4778b
lantiq: simplify image building code
...
Specifying the device profile in PROFILES is unnecessary, and for all
devices the DEVICE_PROFILE variable matched the device name.
Get rid of this useless variable and set DEVICE_DTS to $(1)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
cc88df1a38
lantiq: fix building NAND images in default config
...
Remove remaining references to $(PROFILE)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
9497a23ecb
build: add support for parameter passing to mkfs from devices
...
Will be used to support different ubifs parameters per device
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
4added6692
build: split legacy image mkfs.ubifs command from the one used for the new image building code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
ebd0b2d0b1
build: split legacy image building code out of image.mk
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
d7b185128d
build: make TARGET_ROOTFS_JFFS2 depend on USES_JFFS2
...
If jffs2 support was not enabled by the target, jffs2 are quite likely
to be broken, so we shouldn't build them.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
ceee47ba64
lantiq: disable jffs2 support on xrx200
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
1c1244193a
image.mk: replace some template abstraction with make pattern rules
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
efdf7f6499
image.mk: remove obsolete Build/mkfs overrides
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
5a92e049d5
kernel: remove obsolete patch adding usb_find_device_by_name
...
ledtrig-usbdev does not need it anymore
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
5ea8756766
ledtrig-usbdev: use upstream function for iterating USB devices
...
This will allow us to drop LEDE patch adding usb_find_device_by_name.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-20 10:13:50 +02:00
e633a1b48f
ar71xx: fix default network config of WZR-HP-G300NH and CR3000
...
The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the
lan interface to a vlan tagged device while the switch was set up in untagged
mode, leading to broken lan side ethernet connectivity by default.
Fix the issue by emitting untagged interfaces, consistent with the switch
setting on the device.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-20 00:21:48 +02:00
d963ddf042
ar71xx: add support for gl-ar300m
...
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/
Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
6c2651566c
ath9k: switch to using mac80211 intermediate software queues
...
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 14:27:08 +02:00
4221288db7
x86/generic: enable CONFIG_SATA_VIA
...
This enables support for VIA SATA.
2016-07-19 14:26:32 +02:00
122a7021a9
ubox: update to the latest version, fixes lsmod output
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 13:59:04 +02:00
6b654ab741
uboot-oxnas: fix build error on non-linux systems
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 12:48:28 +02:00
022698c6c9
kernel: backport cosmetic UBIFS patches to kernel 4.1
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-19 00:31:34 +02:00
fc90851df0
kernel: backport yet another cosmetic ubifs patch
...
On UBI-enabled devices using squashfs as their rootfs an error
message like
UBIFS error (ubi0:3 pid 1): init_constants_early: too few LEBs (12), min. is 17
was thrown while probe-mounting the rootfs which later on succeeds and
thus shouldn't alert the user.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-19 00:31:27 +02:00
9b05d3aa8e
strace: update to version 1.12
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-18 23:25:30 +02:00
f082d94235
oxnas: add kmod-ledtrig-timer to default package set
...
It is needed for preinit/failsafe indications to work.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 20:05:15 +02:00
8880497382
oxnas: use DHCP by default on ethernet interface (lan)
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 19:37:43 +02:00
b05125c775
oxnas: sync kernel config-4.1 with changes made to config-4.4
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 18:59:53 +02:00
caf36d199d
oxnas: add DTB for Akitio devices in patches-4.1
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 18:45:03 +02:00
c5ec5e1f7f
oxnas: revert to kernel 4.1
...
A bug resulting in the NAND not being detected by newer kernels has
kept me sleepless for months and yet I wasn't able to discover the
cause.
Bring back patches and files for 4.1 until this has been resolved.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-18 18:35:32 +02:00
Felix Fietkau
Rafał Miłecki
Jo-Philipp Wich
Zhao Gang
Florian Klink
Daniel Golle
Hauke Mehrtens