Commit Graph

9216 Commits (935ca3f3eb7435b50b91bc2ed341a4bbd6e759b0)

Author SHA1 Message Date
Luka Perkov 9a5c26d4ef cns3xxx: use files directory
SVN-Revision: 34101
2012-11-06 11:16:41 +00:00
John Crispin 7404e59bbd add OWRTDTB marker patch
SVN-Revision: 34100
2012-11-06 10:39:43 +00:00
John Crispin 3a1851964e add support for arv7525
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
Imre Kaloz e141cbb0f9 refresh patches
SVN-Revision: 34095
2012-11-06 05:45:12 +00:00
Imre Kaloz 1a9dfd566e add default packages
SVN-Revision: 34094
2012-11-06 05:39:08 +00:00
Jonas Gorski 0722fd9c63 linux: generic: fix split_squashfs for 3.6
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.

SVN-Revision: 34093
2012-11-06 00:48:21 +00:00
Jonas Gorski 5bc7d81a20 bcm63xx: fix SPW303V images
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
Gabor Juhos e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
Gabor Juhos f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
Gabor Juhos e8669729bc kernel: update linux 3.6 to 3.6.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
2012-11-05 13:22:09 +00:00
Imre Kaloz d822ecfdf8 use the mainline machname for the compex boards
SVN-Revision: 34083
2012-11-05 11:38:23 +00:00
Gabor Juhos a0dd47bbed ramips: enable USB power on the DIR-645
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
Gabor Juhos 5e43b934fd linux/3.3: backport an upstream GPIO patch
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().

This will be used by ar71xx/ramips platforms.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34081
2012-11-05 11:04:43 +00:00
Gabor Juhos 829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
Gabor Juhos ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
Gabor Juhos 1b744e1ca5 ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
Gabor Juhos b78a736dc2 ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
Felix Fietkau 6040b1d29a linux-3.6: fix portability of some includes files in tools/ used on the host
SVN-Revision: 34068
2012-11-04 17:01:15 +00:00
John Crispin 05fbb370dc 3.6 is not the default yet
SVN-Revision: 34065
2012-11-03 13:29:44 +00:00
John Crispin a9ad36b7f1 adds dts files and make devicetree images buildable
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
John Crispin c8ae6dac56 update ase target for 3.6
SVN-Revision: 34063
2012-11-02 20:07:41 +00:00
John Crispin dc8641f7fa add subtarget, as of 3.6 we dont seperate xway SoC
SVN-Revision: 34062
2012-11-02 20:07:36 +00:00
John Crispin dd619da4fc adds 3.6 files, patches and config
SVN-Revision: 34061
2012-11-02 20:07:26 +00:00
John Crispin 736835343c move files/ -> files-3.3/
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00
John Crispin fa316620a7 prepare Makefile for 3.6
SVN-Revision: 34059
2012-11-02 20:06:51 +00:00
Gabor Juhos 0005762690 generic: make yaffs work on 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34054
2012-11-01 11:07:23 +00:00
Gabor Juhos ffcb4b0fe1 generic: rename jffs2 patches
Make room for the upcoming yaffs patches.
No functional changes.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34053
2012-11-01 11:07:16 +00:00
Daniel Dickinson 7e0f8049fa Fix feeds.conf.default when no SVN info present
SVN-Revision: 34051
2012-11-01 07:15:49 +00:00
Gabor Juhos 6c8c3ee77d generic: use mtd_* helpers in the yaffs code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34046
2012-10-31 21:17:30 +00:00
Imre Kaloz 3c12bad276 move PCIe init to subsys init call
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug.  I have modeled the cns3xxx PCIe init after
other ARM platforms.  Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.

Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34044
2012-10-31 20:16:53 +00:00
Gabor Juhos 07a762c4c5 kernel: update linux 3.6 to 3.6.5
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34042
2012-10-31 20:09:39 +00:00
Gabor Juhos a4126685c6 generic: split yaffs-3.2-fix patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34041
2012-10-31 19:33:12 +00:00
Gabor Juhos 4baeb543f0 generic: replace yaffs-2.6.39 patch
Use backported upstream patches instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34032
2012-10-31 15:12:45 +00:00
Gabor Juhos b888c2deab generic: replace yaffs mutex_fix patch
Use a backported patch instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34021
2012-10-30 21:16:24 +00:00
Gabor Juhos d54782d01a generic: replace yaffs symlink fix patch
Use a backported patch instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34020
2012-10-30 21:16:23 +00:00
Gabor Juhos 9a8ccc1a08 generic: rename yaffs patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34019
2012-10-30 21:16:21 +00:00
Florian Fainelli e14e4306c9 set earlyprintk UART to be the default Realview UART
SVN-Revision: 34015
2012-10-30 16:56:10 +00:00
Gabor Juhos 449f88df0f generic: fold yaffs_git_2010_10_20 patch to generic/files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34013
2012-10-30 14:58:17 +00:00
Gabor Juhos 56190ed0fc generic: fold yaffs_cvs_2009_04_24 patch to generic/files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34012
2012-10-30 14:58:13 +00:00
Gabor Juhos 7228a91a3b ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Imre Kaloz c0c69c974f add missing 3.6 symbols
SVN-Revision: 33986
2012-10-29 10:00:02 +00:00
Imre Kaloz 8e49dfe68a the uImage's filename will hardly change
SVN-Revision: 33985
2012-10-29 09:55:20 +00:00
Gabor Juhos f7b2089704 generic: add more symbols for 3.6
Also refresh the config file with kconfig.pl.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33984
2012-10-29 09:08:59 +00:00
Gabor Juhos e4db63fd64 ar71xx: add initial support for 3.6
The nand subtarget is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
Gabor Juhos 87186c5ed4 kernel: update linux 3.6 to 3.6.4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33982
2012-10-28 18:59:39 +00:00
Gabor Juhos a6549ac1cb ar71xx: remove NO_AUTOINCR flag from the NAND drivers
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
Gabor Juhos 9a37cf7ec6 generic: fix crashlog patch for 3.6
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33970
2012-10-28 09:50:50 +00:00
Gabor Juhos e2ec99889e ar71xx: ag71xx: fix build_skb arguments for 3.6
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
Gabor Juhos 7640a7cc24 generic: fix tcp_window_check patch for 3.6
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:

[    7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[    7.680000] Call Trace:
[    7.680000] [<80273bc4>] dump_stack+0x8/0x34
[    7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[    7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[    7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[    7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[    7.710000]
[    7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[    7.720000] nf_conntrack_ipv4: can't register pernet ops
[    7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[    7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[    7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[    7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[    7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[    7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[    7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[    7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[    7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[    7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[    7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33968
2012-10-27 15:42:25 +00:00
Imre Kaloz 50be09e1f7 instead of updating the whole file, just add the additional boards
SVN-Revision: 33966
2012-10-27 13:29:36 +00:00
Imre Kaloz 1a4f117398 rename erase size variables
SVN-Revision: 33964
2012-10-27 10:50:55 +00:00
Imre Kaloz 549d5a6e34 add support for Netgear WN802T
SVN-Revision: 33963
2012-10-27 10:48:22 +00:00
Imre Kaloz cf7aed0a76 don't enforce rootfs location
SVN-Revision: 33962
2012-10-27 10:43:47 +00:00
Imre Kaloz 702fd5cdb5 generate images for the D-Link DWL-3150 as well
SVN-Revision: 33961
2012-10-27 09:42:58 +00:00
Gabor Juhos 3a86affcdd ar71xx: enable sysupgrade for the CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
Gabor Juhos e99d557c08 ar71xx: add profile and build image for the CAP4200AG
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
Gabor Juhos 9287e0c863 ar71xx: add user-space part for the CAP4200AG
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
Gabor Juhos d54c9653e9 ar71xx: add support for the Senao CAP4200AG board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
Gabor Juhos 3b7cb4eb4a ar71xx: add ath79_wmac_disable_[25]ghz helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
Gabor Juhos e8fc46b7c5 generic: allow to disable [25]GHz support in ath9k via platform data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33954
2012-10-27 08:55:36 +00:00
Gabor Juhos c92998f9d9 generic: use mtd_read in myloader parser
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33952
2012-10-27 07:57:59 +00:00
Gabor Juhos 269872fe1e ar71xx: use mtd_read in wrt160nl_part
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
Gabor Juhos 973eda6077 ar71xx: use mtd_read in tplinkpart
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
Gabor Juhos 28f3adc2ed ar71xx: generate 4,8,16M images for the WPE72
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
Gabor Juhos ee9376d153 generic: swconfig: use led_set_brightness in LED control code
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33946
2012-10-26 18:58:18 +00:00
Gabor Juhos 1127781d40 generic: add missing symbols for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33945
2012-10-26 18:58:15 +00:00
Gabor Juhos ff481a5518 ar71xx: reject TP-Link images containing a bootloader
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
Gabor Juhos db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
Florian Fainelli c691d165c7 add 3.6 kernel configuration
SVN-Revision: 33942
2012-10-26 15:24:19 +00:00
Florian Fainelli 9af90aa80c add missing 6345 clock bits patch to 3.6 patches
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
Florian Fainelli fad6afdf06 add some more 3.6 config symbols
SVN-Revision: 33940
2012-10-26 15:24:10 +00:00
Florian Fainelli 8d69af7c9f add preliminary support for 3.6 kernel
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
Hauke Mehrtens 6a699a8ae8 brcm47xx: check for .ELF header in partition parser
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.

This closes #11420

Thank you b.sander for the patch.

SVN-Revision: 33935
2012-10-25 19:49:20 +00:00
Hauke Mehrtens d4ef5de604 kernel: add PCI id 14e4:4350 to ssb
* 14e4:4350 is found on a Broadcom BCM43222.
* remove some warnings when using a BCM43222.

SVN-Revision: 33929
2012-10-25 15:50:47 +00:00
Felix Fietkau 1e2962e63c kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again
SVN-Revision: 33923
2012-10-25 15:11:45 +00:00
Felix Fietkau 5591188ac3 kernel: refresh config files using kconfig.pl
SVN-Revision: 33922
2012-10-25 15:11:40 +00:00
Hauke Mehrtens dca633f1c8 kernel: update bcma and ssb to master-2012-10-18 from wireless-testing
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx

SVN-Revision: 33920
2012-10-25 14:33:47 +00:00
Florian Fainelli dea2da55df fix Ethernet DMA for 636x and 6328 after r33916
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
Florian Fainelli 917670922b add support for the Dynalink RTA770BW board
This board id is used by the Siemens Gigaset SE515 router.

SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
Florian Fainelli bdfcbb8bee make BCM6345 Ethernet DMA changes runtime checks
The semantics of the DMA engine are identical, we just have a couple of
special case handling.

SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
Florian Fainelli df6f9072ab ARM: fix XZ decompressor stub build failure on strstr()
SVN-Revision: 33915
2012-10-24 15:57:31 +00:00
Florian Fainelli b5c27880ee fixup generic 3.6 kernel config
It was not meant to be committed as-is in r33911

SVN-Revision: 33914
2012-10-24 15:57:24 +00:00
Florian Fainelli a6bfca90b0 fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set
This issue got introduced while porting the patch over 3.6 in r33897

SVN-Revision: 33913
2012-10-24 13:23:20 +00:00
Florian Fainelli 7e856e5a97 make all 3.6 patches apply and build
SVN-Revision: 33911
2012-10-24 13:05:22 +00:00
Florian Fainelli 4afb91a12f swconfig: get rid of the NLA_PUT_* macros
Upstream kernel 3.6 has removed this usage, use the plain functions directly as
intended.

SVN-Revision: 33906
2012-10-24 13:05:04 +00:00
Jo-Philipp Wich f600ec5b3b x86: allow both old and new grub signatures in sysupgrade
SVN-Revision: 33898
2012-10-23 16:34:00 +00:00
Imre Kaloz 949b46d13d linux 3.6 support (work in progress)
SVN-Revision: 33897
2012-10-23 12:21:34 +00:00
Jonas Gorski 0d2cf5f9e3 kernel: move the bcma fallback sprom fix to generic
bcm63xx needs the bcma fallback sprom fix, too.

SVN-Revision: 33896
2012-10-23 10:57:49 +00:00
Jonas Gorski 0cc4bed41c add support for Comtrend AR5381u.
Router: Comtrend AR5381u.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33895
2012-10-23 10:57:47 +00:00
Jonas Gorski d73871fb18 add support for Comtrend AR5387un.
Router: Comtrend AR5387un.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33894
2012-10-23 10:57:44 +00:00
Jonas Gorski e93725a743 add support for HomeStation ADB P.DG A4001N.
Router: HomeStation ADB P.DG A4001N.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33893
2012-10-23 10:57:39 +00:00
Felix Fietkau 95e642632a x86: correct image magic for grub2 images
Sysupgrade broke on x86 when grub2 superceded grub.  This patch
corrects tha magic_word to be expected in grub2 combined images.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 33890
2012-10-22 16:06:29 +00:00
Florian Fainelli 61686a1514 add back support for BCM6345 Ethernet DMA engine
SVN-Revision: 33889
2012-10-22 12:57:22 +00:00
Florian Fainelli eeed82c04e fix clocks bits for BCM6345
SVN-Revision: 33888
2012-10-22 12:57:14 +00:00
Florian Fainelli ca25e61c6c refresh 3.3 patches
SVN-Revision: 33887
2012-10-21 21:30:30 +00:00
Jonas Gorski e6171dfb2c Add F@ST2604 board support.
Add Sagem F@ST2604 board support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
Gabor Juhos f1f388d527 ar71xx: rw2458n - fix flash parts
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33867
2012-10-19 18:32:49 +00:00
Gabor Juhos b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
2012-10-19 17:42:22 +00:00
Gabor Juhos 6ca2970e4b ramips: add profile and build image for the TEW-691GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
2012-10-18 07:23:13 +00:00
Gabor Juhos 21180e29f7 ramips: add user-space support for TEW-691GR
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
2012-10-18 07:23:12 +00:00
Gabor Juhos 25d53c4c28 ramips: rt3883: add initial support for the TRENDnet TEW-691GR board
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33850
2012-10-18 07:23:11 +00:00
Gabor Juhos 462a53c367 ramips: add profile and build image for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33849
2012-10-18 07:23:10 +00:00
Gabor Juhos d3c368c324 ramips: add user-space support for the TEW-692GR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33847
2012-10-18 07:23:07 +00:00
Gabor Juhos 7f8b7207c9 ramips: rt3883: add initial support for TRENDnet TEW-692GR board
No wireless support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33846
2012-10-18 07:23:06 +00:00
Gabor Juhos bf9ae9432b ramips: add profile and build image for the DIR-645 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33845
2012-10-18 07:23:04 +00:00
Gabor Juhos 06edafd079 ramips: add user space support for the DIR-645
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33844
2012-10-18 07:23:03 +00:00
Gabor Juhos d1a253a2fd ramips: rt3883: add inital support for the DIR-645 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33843
2012-10-18 07:23:02 +00:00
Gabor Juhos e962c16a88 ramips: use get_magic_long in sysupgrade image check
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
Gabor Juhos 0045449b1b generic: add driver for the the RTL8367R{B,-VB} switches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33839
2012-10-18 07:22:56 +00:00
Felix Fietkau 96fa602499 ixp4xx: add sysupgrade support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/ixp4xx/base-files/lib/ixp4xx.sh           |   25 ++
 target/linux/ixp4xx/base-files/lib/upgrade/platform.sh |  156 +++++++++++++++++
 target/linux/ixp4xx/image/Makefile                     |   11 +
 3 files changed, 192 insertions(+)

SVN-Revision: 33828
2012-10-17 22:03:46 +00:00
Felix Fietkau 879b7a7a9b cns3xxx: update FIQ header file and disable RWFO
Update header file appropriately and disable read for ownership

Note that the FIQ support implements a workaround that provides a performance
boost over the traditional upstream workaround which ensures cache lines
are exclusive on driver CPU using 'read for ownership'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/cns3xxx/config-3.3                                |    2 +-
 target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch |    9 ++++-----
 2 files changed, 5 insertions(+), 6 deletions(-)

SVN-Revision: 33827
2012-10-17 22:03:37 +00:00
John Crispin 6993e19532 drop GPIODEV platform code
SVN-Revision: 33825
2012-10-17 21:53:37 +00:00
Gabor Juhos 7a72f01a72 ar71xx: merge machine support patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33820
2012-10-17 18:27:50 +00:00
Gabor Juhos 2e1bc1e15b ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33819
2012-10-17 18:27:48 +00:00
Gabor Juhos 31387947c8 ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
Gabor Juhos 5ffc08e3dc ar71xx: add a helper function for setting up ETH_CFG register on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33817
2012-10-17 18:27:45 +00:00
Gabor Juhos 35a91a4fe8 ar71xx: OM2P-HS sysupgrade support
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33803
2012-10-17 08:26:05 +00:00
Gabor Juhos c5a32cfc92 ar71xx: add support for the OpenMesh OM2P-HS board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
Florian Fainelli 254d851d8a nuport-mac: various fixes
- properly check for the link up condition in the phylib adjust callback
- do not assign skb->dev, eth_type_trans() already does it
- handle skb allocation failures in the refill path

SVN-Revision: 33780
2012-10-15 21:03:57 +00:00
Florian Fainelli 60ecd5fe04 merge the RDC R-321x target as a subtarget of x86
SVN-Revision: 33779
2012-10-15 18:54:34 +00:00
Gabor Juhos f1283d8583 ar71xx: fix sysupgrade for jjPlus JWAP003
[juhosg: change commit message]

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33769
2012-10-14 16:24:26 +00:00
Gabor Juhos 1944f7b916 ar71xx: ew-dorin: added ethernet switch configuration
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33768
2012-10-14 16:24:25 +00:00
Gabor Juhos 62ab2b0da6 ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.

[juhosg: fix OpenMesh template instead of use of string substitution]

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33767
2012-10-14 16:24:22 +00:00
Florian Fainelli e4bebad4f7 add Actiontec PK5000 LEDs
Also share them between the GT701 and the PK5000.

Patch from Daniel Gimpelevich.

SVN-Revision: 33756
2012-10-13 17:47:45 +00:00
Florian Fainelli d78371f5c0 vlynq: rework probing and clocking setup
Handle the different vlynq device versions, and make the vlynq code more
in line with the original vlynq implementation.

Patch from Daniel Gimpelevich.

SVN-Revision: 33755
2012-10-13 17:47:36 +00:00
Florian Fainelli 0f04f7479c remove the squashfs alignement define
Patch from Daniel Gimpelevich.

SVN-Revision: 33754
2012-10-13 17:47:30 +00:00
Florian Fainelli ec4e61e558 handle LOADER_MAGIC2 in ar7part
This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich.

SVN-Revision: 33753
2012-10-13 17:47:25 +00:00
Florian Fainelli e5a65db1b5 increase the flash resource size to its maximum value
CFI detection will reduce the resource size to its real value.

Patch from Daniel Gimpelevich.

SVN-Revision: 33752
2012-10-13 17:47:20 +00:00
Florian Fainelli 7205421c5b reinstate the fixed PHY fallback for devices with undetectable switches
At least devices without a switch present on the MDIO bus still get a valid
link and work as expected (such as the Linksys WAG54Gv2).

SVN-Revision: 33751
2012-10-13 17:47:14 +00:00
Florian Fainelli 3794a6a9dd enable mvswitch driver
And fix the default network configuration to create the required VLANs.

Patch from Daniel Gimpelevich.

SVN-Revision: 33750
2012-10-13 17:47:09 +00:00
Florian Fainelli 99598d2473 use the second available LED to encore mode boot states
Patch from Daniel Gimpelevich.

SVN-Revision: 33749
2012-10-13 17:47:04 +00:00
Florian Fainelli 31c324f451 use wpad-mini instead of hostapd
SVN-Revision: 33744
2012-10-13 17:46:32 +00:00
Imre Kaloz c24df51736 add support for new Option modules (GTM66xxWFS/GTM67xxWFS)
Add new device ID's for the hso driver as well as usb storage

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33743
2012-10-13 06:58:42 +00:00
Jo-Philipp Wich 4cfd3dc8ed x86/kvm_guest: enable PCIE support
SVN-Revision: 33741
2012-10-12 16:51:31 +00:00
Florian Fainelli e7b2a4170c copy initramfs kernel to bin directory
SVN-Revision: 33726
2012-10-11 15:45:24 +00:00
John Crispin ba6751058b gpiodev/gpioctl RIP
SVN-Revision: 33725
2012-10-11 11:58:09 +00:00
Imre Kaloz 88a740ff80 fix (really this time) laguna UART config
Properly terminate the correct platform resource for laguna UARTs

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33721
2012-10-11 09:51:35 +00:00
Imre Kaloz 9b22ca8042 The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33720
2012-10-11 07:59:06 +00:00
Imre Kaloz 31c2f1a4d2 fix non terminated uart resources for laguna
Resolves crashes when probing multiple serial devices

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33719
2012-10-11 07:47:27 +00:00
Florian Fainelli bc3b111cfd generate vmlinux.srec and vmlinux.bin from srec2bin
Useful for loading the kernel into RAM using ADAM2/PSPBoot.

SVN-Revision: 33718
2012-10-11 06:45:07 +00:00
Felix Fietkau d0ec348ded kernel: fq_codel: dont reinit flow state
Keep fq_codel flow state around after queue empty.

SVN-Revision: 33687
2012-10-10 11:54:31 +00:00
Felix Fietkau f933719138 kernel: dont delay acks after ECN CE
Bugfix from linux head - don't delay acks from ECN congestion
experienced in some situations.

SVN-Revision: 33686
2012-10-10 11:54:27 +00:00
Felix Fietkau 85871f283a cns3xxx: Fix GPIO configuration for Gateworks Laguna boards
The Laguna boards do not use all the same pins for SDHCI as the Cavium
reference board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33684
2012-10-10 11:39:02 +00:00
Felix Fietkau 6bb7409e5a cns3xxx: Fix laguna arm11mpcore watchdog
The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where
all mpcore-wdt boards point the driver base too.  I believe this is wrong
because 0x600 is aliased to the timer/watchdog of the 'current CPU' where
0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog.  Thus
if your timer/watchdog application is switching between CPU's it can end up
writing to the wrong CPU's registers which results in random board resets
from watchdog timeouts etc.

This patch forces the timer/watchdog driver to use CPU0's registers always.
Its my opinion that other mpcore-wdt boards should be doing the same thing.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33683
2012-10-10 11:38:58 +00:00
Felix Fietkau f570c806ef mtd: allow partial block unlock
This allows sysupgrade for devices such as the Gateworks Avila/Cambria
product families based on the ixp4xx using the redboot bootloader with
combined FIS directory and RedBoot config partitions on larger FLASH
devices with larger eraseblocks.

This second iteration of this patch addresses previous issues:
  - whitespace breakage fixed
  - unlock in all scenarios
  - simplification and fix logic bug

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33681
2012-10-10 11:38:44 +00:00
Felix Fietkau cae6f4ddb4 ixp4xx: enable OPTIMIZE_FOR_SIZE
Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is
critical for some small-footprint boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33679
2012-10-10 11:38:28 +00:00
Felix Fietkau f14b8d43f2 ixp4xx: add missing reboot handlers (fixes #11577)
SVN-Revision: 33672
2012-10-09 15:38:55 +00:00
Felix Fietkau 856fba88d9 x86: remove the reboot=bios command line parameter (#12193)
SVN-Revision: 33671
2012-10-09 15:20:11 +00:00
Jonas Gorski fbe0af3237 bcm63xx: remove bcm_tag usage in kernel
Fixes #12292.

SVN-Revision: 33670
2012-10-09 08:08:49 +00:00