89c0392736
ralink: drop v3.8 support
...
Signed-off-by: John Crispin <blogic@opewnrt.org>
SVN-Revision: 37311
2013-07-14 18:00:34 +00:00
eb0a44917e
ar71xx: update to 3.10.1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37310
2013-07-14 17:29:56 +00:00
13f3c9dbe5
mac80211: b43: load b43 on core rev 17 and 18.
...
This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.
SVN-Revision: 37307
2013-07-14 14:23:04 +00:00
71230b33c1
mac80211: b43: activate LP-Phy support every time
...
SVN-Revision: 37305
2013-07-14 14:13:32 +00:00
f8d55e7541
brcm47xx: use b53 phy driver for the switch in kernel 3.10
...
This makes it possible to use swconfig to controll the switch.
This was tested with devices using b43 and bgmac.
This was not tested on devices using tg3.
This does not support the adm switch used in some very old devices.
SVN-Revision: 37304
2013-07-14 14:11:17 +00:00
936683b2de
ar71xx: use uimage split for WHR-HP-G300N
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37303
2013-07-14 14:06:01 +00:00
342946d858
ar71xx: use uimage split for dlrtdev
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37302
2013-07-14 14:05:57 +00:00
594797cdd5
ar71xx: use uimage split for Allnet devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37301
2013-07-14 14:05:53 +00:00
e5b7a20bea
ar71xx: use uimage split for Cameo devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37300
2013-07-14 14:05:50 +00:00
4fc17e4d08
ar71xx: use uimage split for DIR-825B1
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37299
2013-07-14 14:05:46 +00:00
c263993197
ar71xx: use uimage split for Embedded Wireless Dorin
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37298
2013-07-14 14:05:42 +00:00
083b0a06a3
ar71xx: use uimage split for Ubiquiti XM devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37297
2013-07-14 14:05:39 +00:00
6702955857
ar71xx: increase kernel size for wndr3700 based devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37296
2013-07-14 14:05:35 +00:00
25d910a78f
ar71xx: use uimage split for WZR-HP-G300NH2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37295
2013-07-14 14:05:31 +00:00
6bff456212
ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37294
2013-07-14 14:05:27 +00:00
fbde376c53
ar71xx: use uimage split for WZR-HP-G300NH
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37293
2013-07-14 14:05:23 +00:00
a7c5f6708b
ar71xx: use uimage split for WZR-HP-G450H
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37292
2013-07-14 14:05:19 +00:00
ab5e21a9a5
ar71xx: enable uimage split and use it for carambola2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37291
2013-07-14 14:05:16 +00:00
8d5d96e833
ar71xx: remove linux 3.8
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37290
2013-07-14 14:05:12 +00:00
d1238718c2
ar71xx: move the watchdog driver to the kernel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37289
2013-07-14 14:05:08 +00:00
8cf868e1a6
ar71xx: set linux 3.10 as default
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37288
2013-07-14 14:05:04 +00:00
a5c0ad6354
brcm47xx: add initial support for kernel 3.10
...
SVN-Revision: 37287
2013-07-14 13:44:45 +00:00
3bc90a4d23
brcm47xx: fix switch handling
...
This fixes some problems with the switch handling
* It now send the messages again to indicate a button for failsafe mode should be pressed
* it does not leak packages between wan and lan any more
* the switch works again in normal mode
The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.
This should close #13869 , #13868 and #13716
SVN-Revision: 37286
2013-07-14 13:19:58 +00:00
17bbc92882
kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 ( #13848 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37285
2013-07-14 13:10:22 +00:00
ef0b9be95e
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
SVN-Revision: 37284
2013-07-14 12:59:00 +00:00
656d475043
kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37283
2013-07-14 12:57:03 +00:00
b95bdc8ab5
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37282
2013-07-14 12:56:58 +00:00
e800436de3
brcm47xx: do not change nvram without user interaction
...
SVN-Revision: 37281
2013-07-14 12:56:42 +00:00
9a5a262324
broadcom-diag: make it work with kernel 3.10
...
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.
SVN-Revision: 37280
2013-07-14 11:30:31 +00:00
c7370edf98
broadcom-diag: check the correct value for not null.
...
This also fixes a compile warning.
SVN-Revision: 37279
2013-07-14 11:28:37 +00:00
63d818a219
broadcom-diag: reoder some parts.
...
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.
SVN-Revision: 37278
2013-07-14 11:26:35 +00:00
3a4a74f861
busybox: disable features marked as broken ( #13782 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37277
2013-07-14 11:00:59 +00:00
da72edd7cd
kernel: refresh patches for kernel 3.8.13
...
SVN-Revision: 37276
2013-07-13 22:45:56 +00:00
06accca1d7
kernel: update to kernel 3.10.1 and refresh patches
...
SVN-Revision: 37275
2013-07-13 22:45:09 +00:00
e574f75d16
kernel: update to kernel 3.9.10 and refresh patches
...
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
9b9c6facfc
ar71xx: fix ar933x watchdog clock ( #13866 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37273
2013-07-13 22:29:53 +00:00
e041d370a7
brcm47xx: proc gets mounted without this patch
...
SVN-Revision: 37272
2013-07-13 21:42:19 +00:00
8dabd7a26b
brcm47xx: remove obsolete hotplug stuff
...
SVN-Revision: 37271
2013-07-13 20:38:33 +00:00
299c2ceafa
mac80211: tweak mac address allocation
...
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37269
2013-07-13 11:39:48 +00:00
9e9261a718
bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
...
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37268
2013-07-12 13:46:27 +00:00
92961e0917
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37265
2013-07-12 08:10:19 +00:00
f8543faec4
mac80211: merge a fix for PS-Poll handling, refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37264
2013-07-12 07:59:59 +00:00
e389c2b410
mac80211: remove bogus module params from compat.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37263
2013-07-12 07:59:51 +00:00
39531131a9
ar71xx: add carambola2 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37260
2013-07-11 21:16:53 +00:00
182866ecdc
procd: update to latest git revision
...
this fixes a regression in the watchdog init code
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37259
2013-07-11 21:16:43 +00:00
93c4359512
lantiq: revert 36778 as it breaks irq assignment to pci devices
...
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
3c306f9d07
procd: make the log port default to 514 if none is specified
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37257
2013-07-11 21:16:25 +00:00
bec39b26ad
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37256
2013-07-11 20:56:30 +00:00
4932368398
kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37255
2013-07-11 20:56:27 +00:00
c38b7b3913
kernel: make libsas depend on x86
...
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37254
2013-07-11 20:56:22 +00:00
John Crispin
Felix Fietkau
Hauke Mehrtens