1e8a83e553
uqmi: Add --delete-message for deleting SMS messages
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43504
2014-12-03 09:17:28 +00:00
2dad4c2e07
uqmi: fix SEGFAULT on reading Unicode sms messages
...
Added complementary blobmsg_close_table() before returning from function
on error.
Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>
SVN-Revision: 43477
2014-12-01 16:23:55 +00:00
9f803fca44
uqmi: update to the latest version, also set 802.3 data format via the WDA service
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43381
2014-11-25 20:34:08 +00:00
2d09efcd26
nf_conntrack_rtsp: update to latest version
...
Update nf_conntrack_rtsp to latest version based on http://mike.it-loops.com/rtsp/ (rtsp-module-3.7-v2.tar.gz).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43311
2014-11-19 09:21:12 +00:00
d460500a72
uqmi: update to latest git HEAD
...
* fixes a bug in multipart sms
* adds a new call to read the sim phone number (partially functioanl)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43310
2014-11-19 09:21:07 +00:00
f4417f7ad8
package/*: replace occurences of 'ln -sf' to '$(LN)'
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43205
2014-11-06 19:35:34 +00:00
9a2cf10c33
netfilter: Enable compiling iptables match cluster
...
This patch adds the userspace and kernelspace for
- match NETFILTER_XT_MATCH_CLUSTER
This match can be used to deploy gateway and back-end load-sharing clusters.
- target IP_NF_TARGET_CLUSTERIP
This module allows you to configure a simple cluster of nodes
that share a certain IP and MAC address
without an explicit load balancer in front of them.
Connections are statically distributed between the nodes in this cluster.
This is used i.e. by strongswan-ha.
Signed-off-by: Christian Scheele <cs@embedd.com>
SVN-Revision: 43174
2014-11-03 22:01:45 +00:00
74a3a77bcd
license info - revert r43155
...
turns out that r43155 adds duplicate info.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
c10d97484a
Add more license tags with SPDX identifiers
...
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.
I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.
However, I can not garantee that I always picked the correct information
and/or did not miss license information.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
bec9d38fa4
Add a few SPDX tags
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43151
2014-11-02 12:20:54 +00:00
9d11a9e832
uqmi: update to latest git HEAD
...
this adds support for pin set/unlock/... and iccid.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43127
2014-10-31 11:02:06 +00:00
38e72c779e
iwinfo: add cli support for phy lookup from uci section
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43092
2014-10-27 16:35:41 +00:00
6149caf01e
iwinfo: switch to external git repo, support lookup by phyname & macaddr
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43087
2014-10-27 14:35:44 +00:00
27570407f4
comgt: fix typo in the ncm proto handler
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43071
2014-10-26 16:57:38 +00:00
2579261b7b
comgt: drop the use of the non-standard XCASE termios flag ( #18186 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43014
2014-10-21 20:32:05 +00:00
71d05d211d
nftables: bump to latest, fix minigmp
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43013
2014-10-21 20:00:56 +00:00
48c507b7ed
fix compile against musl
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43000
2014-10-20 10:00:02 +00:00
5ef89f1ec5
iproute2: fix musl build
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42981
2014-10-19 23:04:17 +00:00
51a5ff0947
comgt: add ncm proto support
...
This will not work for all board/dongle combinations until we hit 3.17.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 42866
2014-10-10 08:56:33 +00:00
90120bb771
wwan: add a generic 3g/4g proto
...
this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need
for a stick and setup uci automagically
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42837
2014-10-08 08:01:20 +00:00
1df98fcd5a
comgt: split directip support into its own package
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42836
2014-10-08 08:00:55 +00:00
bb64826bdb
uqmi: dont use proto_block_restart
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42835
2014-10-08 08:00:45 +00:00
e53734ddef
uqmi: make the proto depend on the usb driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42834
2014-10-08 08:00:21 +00:00
87edc29ea1
umbim: dont use proto_block_restart
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42833
2014-10-08 08:00:17 +00:00
2fa06954a3
umbim: work out the ifname instead of relying on it being in uci
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42832
2014-10-08 08:00:07 +00:00
8243e57167
nftables: bump to 2014-09-30, disable gmp
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42802
2014-10-06 06:24:53 +00:00
74397a14ca
iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs
...
The AR9580 with the new ID can be found in the EnGenius ESR900 and the
QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 42793
2014-10-06 04:53:04 +00:00
5121981a9e
iproute2: add conflict for ip with ip-full
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42774
2014-10-05 17:13:34 +00:00
b5529ed26b
iwinfo: detect AC PHY for broadcom-wl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42761
2014-10-05 10:26:17 +00:00
dac05f6724
iwinfo: detect HT PHY for broadcom-wl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42760
2014-10-05 10:26:10 +00:00
349b20c197
iwinfo: fix handling of accessing nl80211 interfaces via radio*
...
look up device path via uci instead of assuming a direct phy index
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42759
2014-10-05 10:26:05 +00:00
0e439d8a2a
iwinfo: enable nl80211 support based on cfg80211, not mac80211
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42758
2014-10-05 10:25:55 +00:00
3158e7cca2
iwinfo: handle 802.11ac mode for lua
...
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
SVN-Revision: 42757
2014-10-04 09:38:17 +00:00
f9fb48c6bc
uqmi: set data format to 802.3 at startup
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42724
2014-10-02 12:19:37 +00:00
bf4cab37b7
uqmi: do not wait for network connection before starting dhcp
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42723
2014-10-02 12:19:26 +00:00
179bfca038
uqmi: update to the latest version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42722
2014-10-02 12:19:09 +00:00
4955a2cd10
uqmi: use the autoconnect feature
...
Instead of connecting once and saving the packet data handle, let the
firmware handle connecting/reconnecting automatically. This is more
reliable and reduces reliance on potentially stale data.
Use the global packet data handle to attempt to disable autoconnect
before restarting the connection. This ensures that the firmware will
take the new APN/auth settings.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42721
2014-10-02 12:18:58 +00:00
b54144a4c7
uqmi: replace logger calls in netifd with echo
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42720
2014-10-02 12:18:43 +00:00
cf595fe834
uqmi: work out the ifname instead of relying on it being in uci
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42719
2014-10-02 12:18:28 +00:00
c2f510f2bd
nftables: bump for bugfixes
...
SVN-Revision: 42698
2014-09-29 08:35:18 +00:00
ca25f76e82
iw: add support for dynamic distance selection (supported by ath9k now)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42689
2014-09-27 21:19:27 +00:00
d27893122d
iw: sync nl80211.h
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42688
2014-09-27 21:19:18 +00:00
16b3eae040
comgt: fix directip auth type
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42671
2014-09-26 15:55:45 +00:00
e5190a77e1
comgt: fireup a dhcpv6-client for directip as well
...
SVN-Revision: 42670
2014-09-26 13:58:40 +00:00
45bd5ebfef
comgt: in directip, derive the wwan ifname automatically instead of specifying it in the config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42669
2014-09-26 13:44:21 +00:00
6edad5a849
curl: only set ca path for openssl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42662
2014-09-25 10:51:56 +00:00
5ad7d7cc97
curl: use the system certificates
...
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>
SVN-Revision: 42661
2014-09-25 10:37:06 +00:00
cb2642b09b
comgt: initialize ifname for directip
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42658
2014-09-24 17:04:20 +00:00
d234ad9dd9
comgt: add no_device=1 for directip proto
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42657
2014-09-24 08:07:45 +00:00
9fa791f62b
comgt: fix misplaced : in directip setup script
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42656
2014-09-24 08:07:40 +00:00
John Crispin
Felix Fietkau
Nicolas Thill
Steven Barth
Jo-Philipp Wich
Imre Kaloz