fb8ae05760
brcm63xx: fix USB gadget build failure after 6345 Ethernet
...
While adding support for BCM6345 Ethernet, some changes in the macros
ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget
driver fail to build. Fix this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39279
2014-01-14 05:22:59 +00:00
a6425f8437
brcm63xx: allow HSSPI registration on 6318
...
A missing condition check in dev-hsspi.c prevented the controller from
being registered on 6318 where it is fully functional.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39278
2014-01-14 05:22:45 +00:00
49ae212eee
brcm63xx: fix build failure on varid
...
varid might both unused and unitialized when building for e.g: bcm6318,
fix these two warnings turned into errors.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39277
2014-01-14 05:22:31 +00:00
e83c1ec61c
brcm63xx: fix ohci frame number offset
...
BCM63XX's ohci controller does not need the frame number shift, but that
was guarded with a PPC symbol. Fix this by making the no-fix generally
available.
This is a regression from the previous conversion to ohci platform driver.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39274
2014-01-13 12:21:08 +00:00
1315058bda
brcm63xx: fix spi flash setup on (at least) some reference boards
...
CFE seems to leave the SPI flash mapping in an invalid state after
loading the kernel on some reference boards, so fix it up on boot.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39273
2014-01-13 12:14:12 +00:00
4aa92df0d8
brcm63xx: add initial support for BCM6318
...
Add inital support for BCM6318, but keep it disabled for now until
most things are supported.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39272
2014-01-13 12:14:02 +00:00
3bdcf040aa
brcm63xx: add initial support for BCM63268
...
Add initial support for the BCM63268 family of SoCs, but keep it
disabled for now as most things don't work yet.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39271
2014-01-13 12:13:51 +00:00
ab8897045c
brcm63xx: fix the pcie window size
...
The low PCIe window on BCM6328 and BCM6362 is actually only 1 MiB big,
not 16 MiB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39270
2014-01-13 12:13:39 +00:00
76164e1a36
brcm63xx: add support for chip variants
...
Some SoCs have variants which are mostly the same, but use a different
chip id (or not). Add code for detecting them and handling them as
their standard counterparts.
This adds support for e.g. BCM6369.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39269
2014-01-13 12:13:26 +00:00
db36359f48
brcm63xx: remove non runtime detect and refresh affinity patches
...
Remove the non runtime detect code since its effectiveness is dubious
and almost never used.
Also update affinity patches to work on top of it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39268
2014-01-13 12:13:15 +00:00
d8ac24b325
brcm63xx: update bmips patches with upstream submission
...
Update bmips cleanup patches with upstream submission and backport a few
bmips fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39267
2014-01-13 12:13:05 +00:00
d9a20b6f46
brcm63xx: spi flash on legacy spi controller needs the workaround
...
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs
additional fixes for M25P80, so it remains broken for now.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39266
2014-01-13 12:12:50 +00:00
af7e570c3b
brcm63xx: fix legacy spi tranfers >= 256 bytes
...
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes
are not affected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39265
2014-01-13 12:11:58 +00:00
f08f0cafc2
brcm63xx: update HSSPI driver with upstream submission
...
Update the HSSPI driver with the upstream submitted one that has a
workaround for the auto cs down issue.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39264
2014-01-13 12:11:45 +00:00
0e2586a774
kernel: update 3.10 to 3.10.26
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
952db22551
kernel: update kernel 3.10 to 3.10.24
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
f1ef0b92be
kernel: update 3.10 to 3.10.21
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
35656042f1
kernel: update 3.10 to 3.10.18
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
b6b06000eb
kernel: update 3.10 to 3.10.17
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
81e2f00367
kernel: update kernel to 3.10.15
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
9c8a5ef115
kernel: update 3.10 to 3.10.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
c75a970337
kernel: b53: add Register Access Bridge Registers (SRAB) interface
...
The SRAB interface is used on BCM4707 and BCM5301X SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38198
2013-09-25 21:44:28 +00:00
554772a665
kernel: update 3.10 to 3.10.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38000
2013-09-15 16:00:41 +00:00
f8cd14921d
brcm63xx: drop linux 3.9 support
...
It is EOL since quite a while, so no need to keep it around.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37911
2013-09-06 19:01:17 +00:00
dc028776f0
brcm63xx: switch to linux 3.10
...
3.10 is stable enough, and 3.9 is EOL since a while.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37910
2013-09-06 19:01:13 +00:00
043edd8074
kernel: update 3.10 to 3.10.9
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37832
2013-08-23 17:31:04 +00:00
6a5b4ec7dc
kernel: update 3.9 to 3.9.11
...
Also refresh 3.9 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37501
2013-07-22 15:30:56 +00:00
7ef37c8e3e
brcm63xx: add linux 3.10 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37481
2013-07-20 11:30:26 +00:00
9a9d97b749
bcm63xx: update ralink wlan firmware hotplug script for new eeprom size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37337
2013-07-15 11:07:59 +00:00
e574f75d16
kernel: update to kernel 3.9.10 and refresh patches
...
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
0d9f760f27
kernel: update linux 3.9 to 3.9.8
...
Includes memory allocation fixes as well as several networking fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37103
2013-06-30 13:10:12 +00:00
6a4e78dca6
brcm63xx: Fixes and additions to the GPIO assignment of Huawei HW556 leds
...
- Some fixes for the incorrect GPIO assignment of leds on Huawei HW556.
- Addition of unassigned (LAN) leds which can be found on the back of the device.
Signed-off-by: Angga Reza Fardana <angga@norture.com>
Patchwork: http://patchwork.openwrt.org/patch/3744/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37102
2013-06-30 13:10:08 +00:00
7d1cd9dfab
bcm63xx: Improve CFE version mod patch.
...
Fix "cfe-" string length copy.
Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f.
Add support for Huawei CFE versions ("cfe-vd").
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3766/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37101
2013-06-30 13:10:05 +00:00
6df83c3f89
bcm63xx: enable all SoCs for both subtargets
...
Now that SMP kernels also work on older SoCs, also enable them for SMP.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37100
2013-06-30 13:10:03 +00:00
e7d93889d7
bcm63xx: make smp kernels boot on older SoCs
...
Enhance BMIPS support so SMP kernels work on older chips.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37099
2013-06-30 13:10:00 +00:00
66f8f30f47
bcm63xx: update patches
...
Update patches with their upstream versions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37098
2013-06-30 13:09:50 +00:00
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
9a077f70de
bcm63xx: fix DSL-274xB F1 default network config
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37032
2013-06-24 20:35:54 +00:00
67f5f188b1
base-files: input/button drivers get loaded before preinit by procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37000
2013-06-21 16:53:47 +00:00
e6ef318802
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36999
2013-06-21 16:53:43 +00:00
4ef56823e0
brcm63xx: reduce the number of Ethernet DMA channels from 16 to 8
...
We currently used 16 DMA Ethernet channels, but the hardware only
supports up to 8 (with 2 per enet and the remaining for USB slave).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36979
2013-06-20 18:47:36 +00:00
28535aad38
brcm63xx: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36958
2013-06-18 10:54:28 +00:00
a9d4bdee43
brcm63xx: provide a default sane MAC address for Cable Modem devices
...
Cable modem devices currently poke at some random location in RAM and
may end up having an invalid MAC address which is not suitable. Provide
a default one which is sane.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36957
2013-06-18 10:54:24 +00:00
8ae2b1155d
brcm63xx: create initramfs HCS images
...
Cable Modem devices cannot load an ELF file directly so we need to
provide them with a HCS image even when targetting initramfs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36954
2013-06-17 22:57:04 +00:00
0ce75bc440
brcm63xx: simplify HCS image creation
...
$(KDIR)/vmlinux is already a binary image, there is no need to create
another one.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36949
2013-06-17 19:32:56 +00:00
78a66975d6
brcm63xx: remove support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36948
2013-06-17 19:32:47 +00:00
d2894412d8
brcm63xx: switch to 3.9 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36947
2013-06-17 19:32:42 +00:00
f03bbaf065
brcm63xx: fix missing antislash in BCM6345 ethernet patch
...
This would cause build failure when disabling support for particular
CPUs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36946
2013-06-17 19:32:35 +00:00
2b9d084af9
brcm63xx: add user-space support for Netgear CVG834G
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36877
2013-06-06 22:22:20 +00:00
42e69f45c7
brcm63xx: add kernel space and image support for the Netgear CVG834G
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36876
2013-06-06 22:22:14 +00:00
966d47989b
brcm63xx: add Broadcom cable modem firmware format header
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36875
2013-06-06 22:22:09 +00:00
600b59642e
brcm63xx: add support for BCM3368
...
Add support for the Broadcom BCM3368 cable modem chipset, includes:
- Ethernet
- SPI
- UARTs
- GPIOs
- PCI
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36874
2013-06-06 22:21:58 +00:00
1beaf031d1
target: don't build jffs2 nor images by default
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
4d0fcd0c49
kernel: add some missing symbols/move them to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36670
2013-05-20 12:42:32 +00:00
0a62b7c148
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
2013-05-19 18:32:13 +00:00
1f4e5f77a0
bcm63xx: Simplify CFE detection.
...
Check bootloader argument in mtd.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: split into two patches, one for detection,
one letting bcm63xxpart use it.]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36659
2013-05-19 18:32:02 +00:00
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
ed06d2ad5c
bcm63xx: don't build CRAMFS
...
Don't build the CRAMFS file system module in the kernel, and save some bytes.
No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36616
2013-05-12 21:41:52 +00:00
ccd7fbba87
led and buttons support for board DWV-S0
...
Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36615
2013-05-12 21:41:50 +00:00
0a907fdb8a
bcm63xx: remove defconfig support
...
All boards use uci-defaults, no need to keep defconfig support.
SVN-Revision: 36610
2013-05-12 11:54:38 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
24636fcabf
bcm63xx: split into two subtargets, generic and SMP
...
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527
2013-05-02 15:28:31 +00:00
d11efa1428
bcm63xx: add SMP support for BCM6362 and BCM6368
...
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526
2013-05-02 15:28:26 +00:00
a80a4f3ec2
bcm63xx: fix hsspi flash registration for BCM6362
...
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524
2013-05-02 15:28:10 +00:00
999a956f4c
bcm63xx: fix/enable livebox minipci
...
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523
2013-05-02 15:28:07 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
db02b0e4ee
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
...
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506
2013-05-01 21:52:25 +00:00
292368409e
brcm63xx: add missing binary operands to BCM6345 ethernet patch
...
Thanks to Emilio Arias for reporting it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505
2013-05-01 21:12:40 +00:00
6f48ccea02
brcm63xx: remove 3.7 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504
2013-05-01 21:12:26 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
90986b5581
bcm63xx: update patches with upstream submissions
...
SVN-Revision: 36407
2013-04-23 13:55:36 +00:00
2a1a16d2d5
bcm63xx: switch to linux 3.8
...
SVN-Revision: 36406
2013-04-23 13:55:17 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
b412a81524
brcm63xx: fix LED names for various boards
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35880
2013-03-04 13:42:35 +00:00
23b3b3a194
kernel: update linux 3.7 to 3.7.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35860
2013-03-03 13:57:40 +00:00
ff20c0e1fc
bcm63xx: Fix sysupgrade for tag-version 7 and 8
...
Fix sysupgrade for tag-version 7 and 8.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35724
2013-02-21 11:45:41 +00:00
d7092aceb8
brcm63xx: migrate platform to common led helper functions
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35661
2013-02-18 10:37:55 +00:00
3f749d1e8e
kernel: update linux 3.7 to 3.7.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
2013-02-17 21:32:42 +00:00
485e52e1d8
bcm63xx: make nvram checksum failures non fatal
...
fixes #12982 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35605
2013-02-15 12:23:49 +00:00
162b8e23a5
kernel: update linux 3.7 to 3.7.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
2013-02-15 07:36:15 +00:00
bae4bfe3f8
kernel: update linux 3.7 to 3.7.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
2013-02-12 09:51:11 +00:00
200359a520
bcm63xx: handle huawei nvram layout
...
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35533
2013-02-10 12:31:31 +00:00
6b0da6db6a
remove support for 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35506
2013-02-05 22:36:54 +00:00
e22926a46b
make default version 3.7.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35505
2013-02-05 22:36:50 +00:00
57803a98ec
remove superfluous calls to /lib/brcm63xx.sh
...
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35504
2013-02-05 22:25:30 +00:00
84d306d23c
remove references to the old switch driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35503
2013-02-05 22:25:19 +00:00
ec19a23bae
fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W
...
SVN-Revision: 35501
2013-02-05 14:57:43 +00:00
f460388ce2
add support for board named RTA770W
...
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference
SVN-Revision: 35500
2013-02-05 14:57:40 +00:00
8506964e6d
bcm63xx: add support for linux 3.8
...
Based on 3.8-rc6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35482
2013-02-04 10:19:55 +00:00
3b4fced67d
bcm63xx: add support for linux 3.7
...
Based on 3.7.6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35481
2013-02-04 10:19:50 +00:00
a15e1a950d
bcm63xx: refresh 3.6 patches
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35477
2013-02-04 10:19:24 +00:00
ce8b226046
bcm63xx: replace kmod-switch with swconfig in default package set
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35407
2013-01-30 00:19:21 +00:00
8411e5c06e
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
17d51121a6
bcm63xx: expose the internal switch to b53
...
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
3e998d9cf9
bcm63xx: move bcm63xx-spi into the kernel
...
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
e952eaa112
bcm63xx: Add Huawei HG556a support
...
Add Huawei EchoLife HG556a support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
0e58173fa5
bcm63xx: Fix caldata partition mtd patch
...
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
10fc07daac
bcm63xx: remove 3.3 support
...
3.6 is tested enough to be considered stable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
d9d0814fc2
Fix Comtrend AR-5381u Power LED
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
0588d13a3e
Fix typo in 96338GW power LED.
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
746b4cec06
bcm63xx: Enable LED pin support for ath9k pci fixup.
...
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
1baeede939
bcm63xx: fix spi transfer handling
...
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
8dc72c5c4d
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
b220071cd2
target specific patches have nothing to do in generic..
...
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
306894b88f
bcm63xx: switch to 3.6.6
...
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
c54fa281b1
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
15519bec9c
bcm63xx: add two missing usb patches to 3.6
...
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
06ad6ffe16
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
f2bb7754f5
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
a50d121d8e
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
5bc7d81a20
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
e91dc2e5b3
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
9af90aa80c
add missing 6345 clock bits patch to 3.6 patches
...
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
dea2da55df
fix Ethernet DMA for 636x and 6328 after r33916
...
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
917670922b
add support for the Dynalink RTA770BW board
...
This board id is used by the Siemens Gigaset SE515 router.
SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
bdfcbb8bee
make BCM6345 Ethernet DMA changes runtime checks
...
The semantics of the DMA engine are identical, we just have a couple of
special case handling.
SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
0cc4bed41c
add support for Comtrend AR5381u.
...
Router: Comtrend AR5381u.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33895
2012-10-23 10:57:47 +00:00
d73871fb18
add support for Comtrend AR5387un.
...
Router: Comtrend AR5387un.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33894
2012-10-23 10:57:44 +00:00
e93725a743
add support for HomeStation ADB P.DG A4001N.
...
Router: HomeStation ADB P.DG A4001N.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33893
2012-10-23 10:57:39 +00:00
61686a1514
add back support for BCM6345 Ethernet DMA engine
...
SVN-Revision: 33889
2012-10-22 12:57:22 +00:00
eeed82c04e
fix clocks bits for BCM6345
...
SVN-Revision: 33888
2012-10-22 12:57:14 +00:00
e6171dfb2c
Add F@ST2604 board support.
...
Add Sagem F@ST2604 board support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
fbe0af3237
bcm63xx: remove bcm_tag usage in kernel
...
Fixes #12292 .
SVN-Revision: 33670
2012-10-09 08:08:49 +00:00
6a000ba37a
bcm63xx: fix 963281TAN image names
...
it's a 6328, not a 6348.
SVN-Revision: 33665
2012-10-08 13:08:40 +00:00
997ace7e5e
firmware-utils: move bcm_tag.h here
...
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
f16ea6be3f
bcm63xx: fix entering failsafe through button
...
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.
SVN-Revision: 33653
2012-10-08 09:59:44 +00:00
caf900f0e4
remove kmod-spi-bitbang
...
This is no longer a dependency of kmod-spi-bcm63xx
SVN-Revision: 33562
2012-09-26 20:11:37 +00:00
7708138183
bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + Wifi
...
Fixes booting the device with button hotplug enabled (#10785 ).
SVN-Revision: 33340
2012-09-09 11:54:56 +00:00
f164b71189
leds: do not register device if no leds defined
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33158
2012-08-13 09:55:10 +00:00
f0f10014a0
BCM6358 fix enet MII clk definitions
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33157
2012-08-13 09:55:07 +00:00
9b91c62917
nb4: fix support, add support for SVC and CLIP BTN
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33156
2012-08-13 09:55:04 +00:00
4feeda756e
bcm63xx: fix USB base registers and IRQs for BCM6328
...
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
07c4524d33
bcm63xx: Add nb6 support (BCM6362 SoC base boards)
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]
SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
820c224029
bcm63xx: add basic bcm6362 support
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
dcd339ac9d
bcm63xx: enable usb for bcm6328
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
94d257a851
bcm63xx: update enetswitch driver
...
Update enetswith driver with latest fixes and additions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
fa75bd977a
bcm63xx: reorder patches
...
Fix the order and names of patches.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
a4d699ccf0
fix DVA-G3810BN image generation
...
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
c6813d33f3
add D-link DVA-G3810BN-TL-1 support
...
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
18206793b2
Add CT6376-1 board support
...
Added CT6373 devices instead of using NB4's devices, as Florian suggested.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
4acdbb1d87
Add brcmsmac profile
...
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
b94d9eb302
remove bcm63xx_pci_register() call in livebox board
...
SVN-Revision: 32661
2012-07-11 09:15:26 +00:00
f8446c3d4c
use physmap-flash on livebox ( #8677 )
...
SVN-Revision: 32660
2012-07-11 09:15:22 +00:00
bb1488e5e7
Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32643
2012-07-06 22:10:37 +00:00
0a3e9c3148
bcm63xx: bcm63xx-spi does not depend on spi-bitbang
...
SVN-Revision: 32594
2012-07-03 21:42:17 +00:00
fad888a85c
bcm63xx: 96348A-122 improvements (Comtrend 5365)
...
1) Improve WLAN button.
2) Add 96348A-122 image.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32593
2012-07-03 21:42:15 +00:00
0c7e676342
bcm63xx: fix second caldata address calculation
...
thanks Noltari for spotting this.
SVN-Revision: 32592
2012-07-03 21:42:12 +00:00
988147111c
bcm63xx: update patches to latest upstream versions
...
SVN-Revision: 32591
2012-07-03 21:42:07 +00:00
4cdc4b1f36
refresh patches
...
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00
52bae2d2bd
fix watchdog and rng drivers section mismatch ( #11767 )
...
SVN-Revision: 32522
2012-06-29 09:07:54 +00:00
1d7878a38b
fix SPI clock frequency selection
...
SVN-Revision: 32512
2012-06-27 22:14:50 +00:00
b89c81929e
fix SPI message control handling for BCM6338/6348
...
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.
SVN-Revision: 32409
2012-06-17 16:17:29 +00:00
f2271efc4e
bcm63xx: readd accidentially dropped ignore_oc in ehci driver
...
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.
SVN-Revision: 32221
2012-06-11 22:24:58 +00:00
6e5242952c
fix 553-board_96348w3.patch patch wrt gpio-keys-polled
...
SVN-Revision: 32096
2012-06-06 20:58:45 +00:00
4c25e42fa8
fix alarm led color for board 96348A-122
...
SVN-Revision: 32089
2012-06-06 16:07:46 +00:00
2f63f097de
add 96348w3 board ( #10764 )
...
SVN-Revision: 32088
2012-06-06 15:45:04 +00:00
9d38989d1f
update livebox board support ( #8677 )
...
Merge most fixes from #8677 :
- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses
Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c
SVN-Revision: 32087
2012-06-06 15:44:56 +00:00
c69a2cdfbb
fix leds naming for all bcm63xx boards
...
SVN-Revision: 32086
2012-06-06 15:44:52 +00:00
23fc737b9d
backport upstream spi-bcm63xx fixes
...
* message pump conversion
* not using stopping state
* setting spi driver mode bits
SVN-Revision: 32078
2012-06-06 13:31:33 +00:00
4112094dbb
increase led number in patch 301-led_count.patch
...
So that board patches are only touching board-related code
SVN-Revision: 32076
2012-06-06 13:31:24 +00:00
9a61b249c5
fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
SVN-Revision: 32060
2012-06-05 13:40:41 +00:00
36c99bcc42
fix bisectability of patch 303-spi-board-info.patch
...
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.
SVN-Revision: 32058
2012-06-05 13:40:35 +00:00
a4d96aae8d
bump to 3.3.8
...
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
ffea8eb913
bcm63xx: fix ethernet on 96328avng and 963281TAN
...
The internal switch did not get registered.
SVN-Revision: 32041
2012-06-04 08:35:25 +00:00
3fc76fb781
bcm63xx: build images for 6328 reference boards with various flash sizes
...
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.
Known issues:
* Button setup unknown, thus no fail-safe available.
* All other BCM6328 and BCM63XX issues
SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
c454ba3657
bcm63xx: readd accidentially dropped network config for SPW303V
...
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00
ec7786c2ec
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
8aac009cc9
bcm63xx: add ath9k to atheros wifi profile
...
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
4aa43122ab
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
e5575fe335
bcm63xx: add support for DSL-274XB rev F1
...
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
a7a82db16f
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
e19ed52fd1
bcm63xx: add a fixup for ath9k devices
...
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
e34018cc9e
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
099d5eec06
bcm63xx: add preliminary support for bcm6328
...
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
7dbb132c88
bcm63xx: add flash type detection
...
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00
b0ffeb0021
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
226b030e44
bcm63xx: add a default switch configuration for DSL-274XB
...
SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
db1ff5c6fa
bcm63xx: setup network config through uci-defaults
...
SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
72b4fdecc9
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
dd37687de0
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
34018a630f
kernel: update linux 3.3 to 3.3.5
...
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
b218b15709
bcm63xx: fix a race between PCI bus scan and fallback sprom registration
...
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.
Fixes #11384 .
SVN-Revision: 31638
2012-05-06 21:25:34 +00:00
5d9b44d110
use a define for the poll and debounce interval
...
SVN-Revision: 31550
2012-05-02 15:40:26 +00:00
cbfce53831
kernel: update linux 3.3 to 3.3.4
...
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
e047cf1899
switch to gpio-keys-polled
...
SVN-Revision: 31491
2012-04-27 16:44:48 +00:00
8a38c62c07
bcm63xx: drop linux 3.2 support
...
SVN-Revision: 31464
2012-04-24 11:49:27 +00:00
77219290e1
bcm63xx: drop linux 3.0 support
...
SVN-Revision: 31463
2012-04-24 11:49:24 +00:00
49de6c1714
bcm63xx: switch kernel to 3.3
...
SVN-Revision: 31462
2012-04-24 11:49:19 +00:00
f7df1eafc4
bcm63xx: enable bcm6368 for linux 3.3 and build images
...
Only build bcm6368 images when building for linux 3.3.
SVN-Revision: 31133
2012-03-28 20:42:37 +00:00
c7ae2fccb6
bcm63xx: add initial support for bcm6368 boards
...
SVN-Revision: 31132
2012-03-28 20:42:34 +00:00
68f268a5eb
bcm63xx: add driver for the internal hw trng on bcm6368
...
SVN-Revision: 31131
2012-03-28 20:42:30 +00:00
78fb818f7c
bcm63xx: replace SPI driver with latest upstream version
...
SVN-Revision: 31130
2012-03-28 20:42:25 +00:00
a2adca6ee9
bcm63xx: add ethernet support for bcm6368
...
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.
Also drop the ethernet patch for bcm6345 for now, it needs rework.
SVN-Revision: 31129
2012-03-28 20:42:20 +00:00
0876972850
bcm63xx: add missing bits from extirq support
...
Add missing external IRQ code parts for older chips in the new code.
SVN-Revision: 31128
2012-03-28 20:42:15 +00:00
44d546290a
bcm63xx: reorder patches
...
Reorder patches for a clearer distinction between the purposes of
the different patches.
SVN-Revision: 31127
2012-03-28 20:42:09 +00:00
db6e326c56
targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
...
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
07486c4d96
remove udc patch since it is unused
...
SVN-Revision: 30920
2012-03-13 14:06:44 +00:00
1029786936
remove 3.1 support
...
SVN-Revision: 30823
2012-03-05 16:50:42 +00:00
75b5f4a6b4
rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic
...
SVN-Revision: 30822
2012-03-05 14:49:34 +00:00
c327915156
generate generic images for BCM96358VW and BCM96358VW2 ( #10666 )
...
SVN-Revision: 30821
2012-03-05 14:49:31 +00:00
ca1e59660e
wire bcm96348gw-10 reset button ( #10854 )
...
SVN-Revision: 30820
2012-03-05 14:23:45 +00:00
631a035a76
Merge branch 'bcm63xx'
...
SVN-Revision: 30819
2012-03-05 13:29:54 +00:00
778e5d4fa5
brcm63xx: add support for linux 3.3
...
SVN-Revision: 30027
2012-02-04 10:17:27 +00:00
e67f4477bb
kernel: update linux 3.0 to 3.0.18
...
SVN-Revision: 29965
2012-01-31 09:43:53 +00:00
882eddbf92
build 96348R images
...
SVN-Revision: 29960
2012-01-30 21:12:32 +00:00
0700644b16
remove support for 2.6.39
...
SVN-Revision: 29959
2012-01-30 21:12:28 +00:00
038fc8eac3
bump to 3.0.17
...
SVN-Revision: 29958
2012-01-30 21:12:25 +00:00
3883e71097
brcm63xx: add support for linux 3.2
...
SVN-Revision: 29731
2012-01-13 14:59:50 +00:00
c560444a58
kernel: update linux 3.1 to 3.1.9
...
SVN-Revision: 29726
2012-01-13 14:38:28 +00:00
e49d3e1d5b
kernel: update linux 3.0 to 3.0.17
...
SVN-Revision: 29725
2012-01-13 14:10:44 +00:00
034b7f0ef5
Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.
...
SVN-Revision: 29712
2012-01-11 13:47:48 +00:00
718907b661
don't package gpioctl by default
...
SVN-Revision: 29288
2011-11-21 16:36:39 +00:00
b5739aabd9
fix D-Link DSL-2650U image generation
...
SVN-Revision: 29266
2011-11-19 21:34:51 +00:00
8bac0df4ae
linux: update 3.0 to 3.0.9
...
SVN-Revision: 29264
2011-11-19 18:39:12 +00:00
ae90aa4efd
build images for D-Link DSL-2650U ( #9003 )
...
SVN-Revision: 29238
2011-11-18 10:37:03 +00:00
7f787707de
build images for Pirelli A226M ( #10409 )
...
SVN-Revision: 29045
2011-11-13 19:19:22 +00:00
5dc2098448
register uart0 on DWV-S0 boards ( #10409 )
...
SVN-Revision: 29044
2011-11-13 19:19:18 +00:00
717a4391d7
rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
...
SVN-Revision: 29041
2011-11-13 19:19:05 +00:00
d8acb75009
linux: update 3.1 to 3.1.1
...
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
a9e64493d8
target: globally disable BSD process accounting
...
SVN-Revision: 28584
2011-10-25 16:18:36 +00:00
09b1073f9b
kernel: update kernel to version 2.6.39.4
...
SVN-Revision: 28022
2011-08-16 22:04:10 +00:00
b59ab7d13b
fix ehci build on 3.0+
...
SVN-Revision: 27946
2011-08-10 11:37:25 +00:00
0e40c19b45
add ignore_oc in struct ehci_hcd
...
SVN-Revision: 27945
2011-08-10 11:37:21 +00:00
6b5f483efa
bcm63xx: add support for linux 3.1-rc1
...
SVN-Revision: 27941
2011-08-09 12:19:49 +00:00
c37a9544bf
add support for BCM6345 Ethernet DMA engine
...
SVN-Revision: 27881
2011-08-02 18:55:55 +00:00
11c4128770
improve BCM6345 support
...
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control
SVN-Revision: 27880
2011-08-02 18:55:46 +00:00
4e6c93bef1
bcm63xx: Fix SPI commands and register offsets for BCM6348
...
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.
Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>
SVN-Revision: 27774
2011-07-25 19:52:47 +00:00
9c7294f7c7
add ehci support to DWV-S0 board ( #9059 )
...
SVN-Revision: 27622
2011-07-16 08:39:04 +00:00
930485561c
fix GEN_SPI_RSET_BASE macro ( #9697 )
...
SVN-Revision: 27604
2011-07-13 09:33:11 +00:00
00ad56b73e
move board_HW553 inside the ifdef ..BCM6358 .. endif block
...
SVN-Revision: 27484
2011-07-06 10:00:39 +00:00
1141165bb9
Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel.
...
SVN-Revision: 27471
2011-07-06 06:35:24 +00:00
9dc72505a2
profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc
...
SVN-Revision: 27470
2011-07-06 06:35:22 +00:00
7c3bbe150a
hw553: fix missing has_uart0 in board definition ( #9533 )
...
SVN-Revision: 27448
2011-07-04 15:04:58 +00:00
c5821c1a3a
kernel: update kernel to 2.6.39.2
...
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
ca979845cc
kernel: update ssb and bcma to linux-next next-20110627
...
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
3f40c0f7df
remove gpiodev, prefer sysfs gpio
...
SVN-Revision: 27284
2011-06-25 19:26:17 +00:00
f6e4eb15bc
register SSB sprom after ethernet devices
...
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.
SVN-Revision: 27258
2011-06-22 12:32:03 +00:00
5a76c6bdd7
fix tab damage in 141-led_count.patch
...
SVN-Revision: 27254
2011-06-21 20:52:58 +00:00
3f0f8d9c87
fix and make usable kmod-pcmcia-rsrc
...
This module is also needed for e.g: kmod-bcm63xx-pcmcia
SVN-Revision: 27253
2011-06-21 20:52:53 +00:00
9bdf6abb9d
use macros to generate SPI registers table and switches
...
SVN-Revision: 27246
2011-06-21 10:05:51 +00:00
ab74628c10
dev-spi.c checks for running CPU, not board code
...
SVN-Revision: 27236
2011-06-19 20:46:00 +00:00
4dd4cbeb43
fixup patches after r27234
...
SVN-Revision: 27235
2011-06-19 20:28:38 +00:00
7819b530da
remove accidental bcm6345 related patches
...
SVN-Revision: 27234
2011-06-19 20:16:59 +00:00
12db3df666
remove support for 2.6.37 and 2.6.38
...
SVN-Revision: 27233
2011-06-19 20:14:22 +00:00
6bb0a608dc
switch to 2.6.39
...
SVN-Revision: 27232
2011-06-19 20:12:45 +00:00
426dccd019
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27192
2011-06-16 14:34:40 +00:00
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
2011-05-27 09:54:52 +00:00
590c82cec1
bcm63xx: Add support for 2.6.38
...
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27018
2011-05-27 09:54:48 +00:00
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
2011-05-26 13:53:00 +00:00
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
2011-05-26 13:52:56 +00:00
2785e3fc12
renumber board patches
...
SVN-Revision: 27012
2011-05-26 12:09:15 +00:00
16dfe8b4d1
add support for BT Voyager 2110 ( #8810 )
...
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959
2011-05-20 10:06:25 +00:00
6c8387fe15
add support for DSL-2640B rev B2
...
Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958
2011-05-20 10:06:22 +00:00
031ea08ef0
refresh patches
...
SVN-Revision: 26957
2011-05-20 10:06:18 +00:00
3e83f60a66
add support for D-Link DVA-G3810BN/TL
...
This patch adds support for D-Link's DVA-G3810BN/TL product.
Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956
2011-05-20 10:06:15 +00:00
f0a99c1692
add support for BT Voyager 2500 ( #9070 )
...
SVN-Revision: 26954
2011-05-20 10:06:07 +00:00
acf0ec224f
add support for USR9108 LEDs ( #9372 )
...
SVN-Revision: 26953
2011-05-20 10:06:04 +00:00
9c8a2d5961
bcm63xx: Add support for the T-Home Speedport W 303V
...
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878
2011-05-11 13:34:14 +00:00
7d3b735854
bcm63xx: Update support for the DSL-274xB revision C
...
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.
While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876
2011-05-11 13:33:50 +00:00
0fb1c2d537
bcm63xx: Accept any led with power in its name as power led
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875
2011-05-11 13:33:45 +00:00
c6af9c23b7
bcm63xx: Decouple Board ID and image name for fixup
...
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874
2011-05-11 13:33:41 +00:00
de02a2795b
fill maintainer infos for a couple of targets
...
SVN-Revision: 26836
2011-05-06 12:37:36 +00:00
fcb1557a3e
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
...
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
1fcd26091b
brcm63xx: remove patches/configs for 2.6.35
...
SVN-Revision: 26709
2011-04-17 18:39:46 +00:00
8b18ce6807
Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch.
...
SVN-Revision: 26699
2011-04-17 01:15:47 +00:00
0d722113b9
Generate images for RTA1320_16M-based routers
...
SVN-Revision: 26681
2011-04-15 14:31:36 +00:00
f83c5938d2
bcm63xx: Move the OpenWrt rootfs length field
...
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
33b864e899
Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices.
...
SVN-Revision: 26387
2011-03-31 06:16:23 +00:00
aa580d336b
bcm63xx: Really fix the flash driver in 2.6.37
...
Read back the actual rootfs length from the image tag.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25938
2011-03-07 16:55:01 +00:00
9dd1454044
fix patches after 2.6.37 update, patch from KanjiMonster
...
SVN-Revision: 25810
2011-03-01 16:02:38 +00:00
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
2011-02-20 19:59:22 +00:00
8cc16aa14e
add support for HW553 bcm6358-based boards ( #8844 )
...
SVN-Revision: 25590
2011-02-19 15:44:06 +00:00
b7f8e1276d
add support for 'MAGIC' bcm6348-based board
...
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.
I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )
Thanks to KanjiMonster for the support on the IRC channel.
Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>
SVN-Revision: 25584
2011-02-19 12:44:27 +00:00
31709b2c76
update to 2.6.35.11
...
SVN-Revision: 25582
2011-02-19 12:44:16 +00:00
2d3ed6dc2d
fix T-Com Speedport W 500V default config
...
The device is called SPW500V, not SP500W.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25431
2011-02-09 13:09:02 +00:00
e75274de89
fix build of brcm-wl
...
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 25420
2011-02-08 13:46:12 +00:00
bed53c93d6
give some credits to Tanguy Bouzeloc in the spi driver
...
SVN-Revision: 25133
2011-01-27 02:11:08 +00:00
c6d9ec5173
multiple SPI driver fixes
...
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 24849
2010-12-29 16:19:59 +00:00
dc9c1ac1f7
patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen).
...
SVN-Revision: 24843
2010-12-28 08:10:32 +00:00
5ee2a6c696
patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working.
...
SVN-Revision: 24842
2010-12-28 04:05:04 +00:00
093ebfe217
spi driver: remove bcm_rset usage
...
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced by
"bs->regs" field for all I/O operation.
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 24840
2010-12-28 00:24:50 +00:00
fc3a1d0ba3
Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
...
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>
SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
Florian Fainelli
Jonas Gorski
Gabor Juhos
Hauke Mehrtens
Felix Fietkau
John Crispin
Mirko Vogt
Jo-Philipp Wich
Imre Kaloz
Daniel Dickinson