Commit Graph

39 Commits (2e62ff9320035e47a945cac48b16a4428844e5d7)

Author SHA1 Message Date
Luka Perkov 3b33adeb99 lantiq: add support for ZyXEL P2601HNFX
SVN-Revision: 38049
2013-09-19 00:50:46 +00:00
Luka Perkov 7d2c5682b9 lantiq: add support for ZTE H201L
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
Luka Perkov 27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
John Crispin 288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
John Crispin b4c722267e lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37634
2013-08-01 14:30:40 +00:00
John Crispin 32f7ae4ce6 lantiq: add a hook to make leds work on the secondary usb bus
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37538
2013-07-25 20:29:01 +00:00
Felix Fietkau fc96e8e4b0 lantiq: update ralink wlan firmware hotplug script for new eeprom size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37334
2013-07-15 11:06:07 +00:00
John Crispin f7daed8b9a lantiq: diag.sh with both red and green power LEDs
This provides a boot LED sequence suitable for devices with both red and
green LEDs for power. This assumes no "default-on" settings in the
device tree.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36899
2013-06-10 08:25:02 +00:00
John Crispin c2b1e9eeef lantiq: Fix ar8216 switch configuration
On linux 3.8 the switch is named as "switch0", but the network configuration script names it as "eth0", causing no communication over ethernet due to no proper VLAN config.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36782
2013-05-30 16:00:59 +00:00
John Crispin 090a75447b lantiq: DGN3500 support
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
John Crispin b585923cc9 lantiq: fix LED-handling oversights
This reassigns the PPPoE status to the LED that was intended to indicate
it, rather than the DSL sync light.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36777
2013-05-30 16:00:15 +00:00
John Crispin b42a173664 lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
Steven Barth ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
John Crispin d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
Jo-Philipp Wich 3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
John Crispin 90a3761b0b default switch setup for WBMR
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
John Crispin 9818a1f00b adds script to set wps info on boards with a wps button
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
John Crispin 59cc6d9ddd improve button handling
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
Mirko Vogt e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
John Crispin 687920ba3e minor basefiles fixes
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
John Crispin 1dece11487 cleanup basefiles
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
Luka Perkov 4c76b3635b lantiq: fix sx76x default uci network configuration
SVN-Revision: 33324
2012-09-06 00:09:46 +00:00
Luka Perkov 7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
Gabor Juhos ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
John Crispin d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Mirko Vogt 87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
John Crispin f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin 1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin 976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
John Crispin 49eb3fd845 gigaset 76x
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
2012-01-17 12:10:35 +00:00
John Crispin 4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
John Crispin bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin 3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin 6608f419d1 * backport 2.6.8 patches to .39 / .32.33
* remove lqtapi
* bump tapi/dsl to .39
* migrate to new ltq_ style api
* add amazon_se support

SVN-Revision: 27026
2011-05-29 21:19:26 +00:00
John Crispin 9f47e80bb3 adds new lantiq kernel. once the codebase is fully tested and know to be working on all the devices previously supported by ifxmips, we will drop ifxmips support.
SVN-Revision: 24526
2010-12-12 22:57:16 +00:00