cleanup basefiles

SVN-Revision: 34698
2012-12-15 02:01:00 +00:00 · 2012-12-15 02:01:00 +00:00 · 1dece11487
parent 601bc28669
commit 1dece11487
9 changed files with 76 additions and 89 deletions
--- a/target/linux/lantiq/base-files/etc/diag.sh
+++ b/target/linux/lantiq/base-files/etc/diag.sh
@ -0,0 +1,42 @@
+#!/bin/sh
+# Copyright (C) 2012 OpenWrt.org
+
+[ -d /sys/class/leds/power/ ] || return
+
+set_state() {
+	[ -d /sys/class/leds/power1/ ] && {
+
+		case "$1" in
+		preinit)
+			echo heartbeat >/sys/class/leds/power/trigger
+			;;
+		failsafe)
+			echo none >/sys/class/leds/power/trigger
+			echo timer >/sys/class/leds/power1/trigger
+			echo 100 >/sys/class/leds/power1/delay_on
+			echo 100 >/sys/class/leds/power1/delay_off
+			;;
+		done)
+			echo none >/sys/class/leds/power/trigger
+			echo none >/sys/class/leds/power1/trigger
+			echo 1 >/sys/class/leds/power/brightness
+			;;
+		esac
+		return
+	}
+
+	case "$1" in
+	preinit)
+		echo heartbeat >/sys/class/leds/power/trigger
+		;;
+	failsafe)
+		echo timer >/sys/class/leds/power/trigger
+		echo 100 >/sys/class/leds/power/delay_on
+		echo 100 >/sys/class/leds/power/delay_off
+		;;
+	done)
+		echo none >/sys/class/leds/power/trigger
+		echo 1 >/sys/class/leds/power/brightness
+		;;
+	esac
+}
--- a/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh
@ -7,11 +7,14 @@
 case "${BUTTON}" in
 	BTN_0)
 		logger "reset pressed"
+		echo "REBOOT" > /dev/console
+		sleep 3
 		sync
 		reboot
 		;;
 	BTN_1)
 		logger "factory pressed"
+		echo "FACTORY RESET" > /dev/console
 		jffs2_mark_erase "rootfs_data"
 		sync
 		reboot
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@ -23,12 +23,11 @@ rt2x00_eeprom_extract() {
 }

 [ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh

 case "$FIRMWARE" in
 "RT2860.eeprom" )
-	local board=$(lantiq_board_name)
+	local board=$(lantiq_board_id)
 	case $board in
 	ARV7525PW|ARV752DPW)
 		rt2x00_eeprom_extract "board_config" 1040 272
--- a/target/linux/lantiq/base-files/etc/inittab
+++ b/target/linux/lantiq/base-files/etc/inittab
@ -1,4 +1,3 @@
 ::sysinit:/etc/init.d/rcS S boot
 ::shutdown:/etc/init.d/rcS K stop
 ttyLTQ0::askfirst:/bin/ash --login
-ttyLTQ1::askfirst:/bin/ash --login
--- a/target/linux/lantiq/base-files/etc/uci-defaults/leds
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/leds
@ -5,51 +5,21 @@
 #

 . /lib/functions/uci-defaults.sh
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh

-board=$(lantiq_board_name)
+[ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tx"
+[ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1"
+[ -e "/sys/class/leds/dsl" ] &&	ucidef_set_led_netdev "dsl" "dsl" "dsl" "pppoe-wan"
+
+for a in `ls /sys/class/leds/`; do
+	grep -q "\[none\]" /sys/class/leds/$a/trigger
+	[ $? -eq 0 ] && ucidef_set_led_default $a $a $a `cat /sys/class/leds/$a/brightness`
+done
+
+board=$(lantiq_board_id)

 case "$board" in
-ARV4520PW|ARV452CPW)
-	ucidef_set_led_netdev "wifi" "wifi" "soc:blue:wifi" "wlan0"
-	ucidef_set_led_usbdev "usb" "USB" "soc:blue:usb" "1-1"
-	ucidef_set_led_default "fxs1" "fxs1" "soc:blue:fxs1" "1"
-	ucidef_set_led_default "fxs2" "fxs2" "soc:blue:fxs2" "1"
-	ucidef_set_led_default "online" "online" "soc:blue:internet" "1"
-	;;
-
-ARV7525PW)
-	ucidef_set_led_netdev "wifi" "wifi" "soc:green:wifi" "wlan0"
-	ucidef_set_led_default "fxs1" "fxs1" "soc:green:fxs1" "1"
-	ucidef_set_led_default "fxs2" "fxs2" "soc:green:fxs2" "1"
-	ucidef_set_led_default "dsl" "dsl" "soc:red:dsl" "1"
-	ucidef_set_led_default "online" "online" "soc:green:online" "1"
-	;;
-
-ARV4525PW)
-	ucidef_set_led_netdev "wifi" "wifi" "soc:green:wifi" "wlan0"
-	ucidef_set_led_default "fxs1" "fxs1" "soc:green:fxs1" "1"
-	ucidef_set_led_default "fxs2" "fxs2" "soc:green:fxs2" "1"
-	ucidef_set_led_default "dsl" "dsl" "soc:green:dsl" "1"
-	ucidef_set_led_default "online" "online" "soc:green:online" "1"
-	;;
-
-GIGASX76X)
-	ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
-	ucidef_set_led_netdev "online" "online" "soc:green:online" "pppoe-wan"
-	ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
-	;;
-
-ARV4519PW)
-	ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
-	ucidef_set_led_netdev "internet" "internet" "soc:green:internet" "pppoe-wan"
-	ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
-	;;
-
-ARV7518PW)
-	ucidef_set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
-	ucidef_set_led_netdev "internet" "internet" "soc:green:internet" "pppoe-wan"
-	ucidef_set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
+*)
 	;;
 esac

--- a/target/linux/lantiq/base-files/etc/uci-defaults/network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/network
@ -12,7 +12,6 @@ set_atm_wan() {
 	local payload=$4
 	uci batch <<EOF
 set network.atm='atm-bridge'
-set network.atm.unit='0'
 set network.atm.vpi='$vpi'
 set network.atm.vci='$vci'
 set network.atm.encaps='$encaps'
@ -25,18 +24,8 @@ set network.wan.password='bar'
 EOF
 }

-set_adsl() {
-	local fwannex=$1
-	local annex=$2
-	uci batch <<EOF
-set network.adsl='adsl-device'
-set network.adsl.fwannex='$fwannex'
-set network.adsl.annex='$annex'
-EOF
-}
-
 . /lib/functions/uci-defaults.sh
-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh

 touch /etc/config/network

@ -47,40 +36,33 @@ vpi=1
 vci=32
 encaps="llc"
 payload="bridged"
-fwannex=$(lantiq_dsl_fwannex)
-board=$(lantiq_board_name)
-dsl=$(lantiq_soc_has_adsl)
+
+board=$(lantiq_board_id)

 case "$board" in
-# annex B with adm6996
+# adm6996
 ARV4520PW)
 	ucidef_set_interface_lan "eth0.1"
 	ucidef_add_switch "eth0" "1" "1"
 	ucidef_add_switch_vlan "eth0" "1" "3 2 1 0 5t"
-	set_adsl "b" "b2p"
 	;;

 GIGASX76X)
 	ucidef_set_interface_lan "eth0.1"
 	ucidef_add_switch "eth0" "1" "1"
 	ucidef_add_switch_vlan "eth0" "1" "4 3 2 1 5t"
-	set_adsl "b" "b2p"
 	;;

-# annex A with ar8316
+# ar8316
 ARV4519PW|ARV7518PW)
 	ucidef_set_interface_lan "eth0.1"
 	ucidef_add_switch "eth0" "1" "1"
 	ucidef_add_switch_vlan "eth0" "1" "0t 2 3 4 5"
-	set_adsl "a" "a2p"
-	;;
-
-ARV7525PW|ARV4525PW|*)
-	set_adsl "$fwannex" "${fwannex}2p"
 	;;
 esac

-[ -z "$dsl" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+[ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+

 uci commit network

--- a/target/linux/lantiq/base-files/lib/functions/lantiq.sh
+++ b/target/linux/lantiq/base-files/lib/functions/lantiq.sh
@ -0,0 +1,9 @@
+#!/bin/sh
+
+lantiq_board_id() {
+	grep "^system type" /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g" | sed "s/.* - \(.*\) - .*/\1/g"
+}
+
+lantiq_board_name() {
+	grep "^system type" /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g" | sed "s/.* - \(.*\)/\1/g"
+}
--- a/target/linux/lantiq/base-files/lib/lantiq.sh
+++ b/target/linux/lantiq/base-files/lib/lantiq.sh
@ -1,17 +0,0 @@
-#!/bin/sh
-
-lantiq_soc_has_adsl() {
-	ls /lib/modules/*/drv_dsl_cpe_api.ko
-}
-
-lantiq_soc_name() {
-	grep ^system /proc/cpuinfo | sed "s/system type.*: \(.*\)/\1/g"
-}
-
-lantiq_board_name() {
-	grep ^machine /proc/cpuinfo | sed "s/machine.*: \(.*\)/\1/g" | sed "s/\(.*\) - .*/\1/g"
-}
-
-lantiq_dsl_fwannex() {
-	ls /lib/firmware/dsl-fw-*.bin 2> /dev/null | sed "s/.*\([ab]\)\.bin/\1/g"
-}
--- a/target/linux/lantiq/base-files/lib/preinit/42_athfix
+++ b/target/linux/lantiq/base-files/lib/preinit/42_athfix
@ -1,6 +1,6 @@
 #!/bin/sh

-. /lib/lantiq.sh
+. /lib/functions/lantiq.sh

 init_atheeprom() {
 	local board=$(lantiq_board_name)