f95990a73b
mac80211: fix warnings triggered by tx power changes when using WDS AP ( #15491 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40430
2014-04-08 22:11:27 +00:00
26b8bb6150
mac80211: fix user antenna gain calculation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40429
2014-04-08 22:11:23 +00:00
fe2c9b4e1d
ath9k: fix AP mode crash issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40428
2014-04-08 22:11:19 +00:00
b8795d6b66
ath9k: fix some ANI related stability issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40427
2014-04-08 22:11:13 +00:00
4e155c80d3
mac80211: update to wireless-testing 2014-03-31
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40393
2014-04-06 10:41:23 +00:00
e098045dc2
kernel: fix bluetooth and zsmalloc for 3.14
...
zsmalloc was promoted from staging, while bluetooth gained a dependency
to a library shared with 802.15.4 for 6lowpan support.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40379
2014-04-04 10:16:54 +00:00
86fa1440c7
kernel: fix usb module paths for 3.14
...
dwc2 was promoted from staging, while u_rndis was merged into
usb_f_rndis.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40378
2014-04-04 10:16:52 +00:00
52388da14a
kernel: fix kmod-sound-core for 3.14
...
pcm-page-alloc was merged into snd-pcm.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40377
2014-04-04 10:16:50 +00:00
aa1118c79b
lantiq: fix ptm crash under load
...
https://dev.openwrt.org/ticket/14581
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40335
2014-03-30 14:01:21 +00:00
618984339a
kernel/modules: package Arabic charsets
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40334
2014-03-30 13:08:00 +00:00
5fe7fed09e
kernel/modules: package Hebrew charsets
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40333
2014-03-30 13:07:57 +00:00
3fbffbb7b0
ltq-adsl-mei: improve memory allocation
...
The ltq-adsl-mei driver allocates memory for the ADSL firmware in a
rather stupid way, leading to several 128k allocations, which fail when
many services are enabled. This patch tries to allocate 64 kiB chunks,
and only falls back to larger allocations if the returned pointers are
not correctly aligned. Fixes out-of-memory errors on Danube boards with
32 MiB RAM.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 40325
2014-03-30 09:16:39 +00:00
c9d0738645
ltq-vdsl: fix MIPS16 compile breakage
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40308
2014-03-30 09:15:29 +00:00
f5fce5e0da
mac80211: skip antenna gain when compiling regdb.txt ( #15397 )
...
The antenna gain attribute has been removed from the upstream regulatory database.
Incorperate patch from Luis R. Rodriguez to skip the parsing of the gain attribute
in genregdb.awk in order to emit proper rules again.
Also refresh fuzzy patches while we're at it.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40296
2014-03-28 16:05:46 +00:00
23e3526dc4
update regulatory database to 2013-11-27
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40293
2014-03-27 11:28:51 +00:00
19f9b22f09
Add Bosch C_CAN/D_CAN modules kernel package
...
Add Bosch C_CAN/D_CAN driver as a kernel package. The D_CAN controller is used
on BeagleBoneBlack.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
SVN-Revision: 39990
2014-03-21 15:54:44 +00:00
5041b8e46c
kernel: add can.ko to the kmod-can package.
...
Build all of the can support as modules, otherwise the kernel image is
changed when a can kernel package is selected, because the can protocol
is then built in into the kernel image.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
SVN-Revision: 39989
2014-03-21 15:54:41 +00:00
04d99f29cf
mac80211: iwlagn include firmware for 7260 cards
...
This patch enables including the firmware for Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260 cards in iwlagn.
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
SVN-Revision: 39988
2014-03-21 15:54:37 +00:00
2ba3e0ebe6
mac80211: Enable kmod-rt2800-soc package for rt288x target
...
Trunk and the latest backport to Attitude Adjustment have the
kmod-rt2800-soc package hidden for the ramips_rt288x target.
This makes the dependency match the dependency given in the
TITLE field.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 39976
2014-03-21 15:03:08 +00:00
ee37a00d06
modules: make kmod-pcspkr depend on X86
...
The kernel Kconfig dependency lists X86, and we will fail building this module
on other platforms such as Malta.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39974
2014-03-20 23:15:56 +00:00
c1a86f1ef2
ath10k: update firmware and allow choice between AP and STA firmwares
...
This patch updates ath10k firmware to the latest version, changes the
default firmware to be the one optimized for access point operation, and
introduces a configuration option to choose the client-optimized
firmware instead during build time.
Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 39957
2014-03-19 14:37:12 +00:00
531dc9fe42
add add new firmware support and additional fixes for wl18xx
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39947
2014-03-18 18:55:54 +00:00
aabce5cf6a
switch to the newer DT bindings for wl1xxx
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39946
2014-03-18 18:54:27 +00:00
956ea1cefc
ltq-vdsl-mei: disable mips16 support ( fixes #15284 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39944
2014-03-18 12:11:05 +00:00
8a7d3c8a1b
use newer firmware checkout
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39933
2014-03-17 13:36:10 +00:00
ea2417fe03
kernel: add missing zram option
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39907
2014-03-12 23:36:01 +00:00
00dc53dd2e
brcm47xx: add initial support for kernel 3.14
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39905
2014-03-12 23:28:41 +00:00
0d92f34977
gpio-button-hotplug: don't build for 3.3 kernels
...
3.3 kernels do not have the required changes which would make
gpio-button-hotplug work, disallow building on those kernels for now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39903
2014-03-12 22:09:11 +00:00
73d9ad0c95
ath9k: merge an aggregation related fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39886
2014-03-12 10:00:56 +00:00
c112b16dd8
ath9k: further improvements to noise immunity handling on older chips
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39879
2014-03-11 15:31:50 +00:00
9c48c7a7dc
ltq-vmmc: disable mips16 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39876
2014-03-11 13:20:07 +00:00
f23a50dff9
ltq-tapi: disable mips16 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39875
2014-03-11 13:20:04 +00:00
0c5809fb91
ltq-adsl: disable mips16 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39874
2014-03-11 13:20:01 +00:00
f577d6f336
ltq-adsl: disable mips16 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39873
2014-03-11 13:19:56 +00:00
dd7524f3f9
ath9k: add another ANI fix for older chipsets
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39865
2014-03-10 18:58:52 +00:00
f7f1a496df
ath9k: improve ANI debugfs file
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39849
2014-03-09 10:31:05 +00:00
977f161400
ath9k: fix tx queue configuration for buffered multicast frames
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39848
2014-03-09 10:05:41 +00:00
646ff55b06
ath9k: further reduce false baseband hang detects on older chips
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39847
2014-03-09 08:53:39 +00:00
976ae17c67
mac80211: add a few upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39846
2014-03-09 08:53:31 +00:00
c6c0d09f85
brcm2708-gpu-fw: update to a newer version
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39769
2014-02-28 20:29:51 +00:00
a2068afd77
ath9k: improve noise immunity behavior for older chipsets (ar92xx and earlier), should improve stability
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39767
2014-02-28 18:08:23 +00:00
cec0f8420d
mac80211: declare missing config parameter mesh_id
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39766
2014-02-28 18:08:16 +00:00
95c97bf201
ath5k: fix enabling 5/10 mhz channel bandwidth support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39758
2014-02-27 21:36:28 +00:00
82dd29d1e8
broadcom-diag: fix compile
...
BCM47XX_BOARD_LINKSYS_WRT54G was renamed in r39718
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39753
2014-02-25 22:52:33 +00:00
ccccc104b3
ath9k: add fixes for rx processing and baseband hang detection
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39751
2014-02-25 10:27:02 +00:00
8167b27bca
ath5k: mark the current survey channel as being used
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39691
2014-02-22 13:57:09 +00:00
08255e0237
ath9k: reduce unnecessary logspam ( #14940 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39690
2014-02-22 13:48:56 +00:00
3ae79cd848
ath9k: fix issues with 5/10 mhz channel bandwidth ( #14916 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39689
2014-02-22 13:43:48 +00:00
ec4ab71c54
ath9k: fix issues that have been plaguing some powersave clients since the tx queueing rework ( #14092 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39688
2014-02-22 13:01:11 +00:00
b75914d2fb
ath9k: show more reset causes in debugfs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39687
2014-02-22 13:01:07 +00:00
ca82dfe31b
mac80211: merge some upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39686
2014-02-22 13:01:04 +00:00
fc0a51c2e1
ath9k: enable u-apsd support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39685
2014-02-22 13:01:00 +00:00
b44e9bff9d
ath9k: add a tx locking fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39684
2014-02-22 13:00:55 +00:00
ac46cbcfc0
kernel: add missing depends on kmod-mii
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39670
2014-02-21 22:57:39 +00:00
41d3230b0c
mac80211: disable libertas-sd on uml target
...
SVN-Revision: 39630
2014-02-18 22:15:52 +00:00
7d4103ddd4
mac80211: add validation rules
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39622
2014-02-18 13:34:08 +00:00
c0bec2b315
mac80211: send wpa frames through the WMM voice queue - improves connection reliability
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39572
2014-02-11 15:00:55 +00:00
cd7fb9a51f
ath9k: add p2p client mode support powersave patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39571
2014-02-11 15:00:51 +00:00
8e43f3443e
rtl8187: fix crashes on mips caused by misaligned DMA and cache issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39570
2014-02-11 15:00:36 +00:00
31fb795fd0
kernel: fix kmod-usb-phy-nop
...
phy-generic.ko was renamed and moved from kernel version to version.
kernel <= 3.9: nop-usb-xceiv.ko
kernel >= 3.10 && <= 3.11: phy-nop.ko
kernel >= 3.12: phy-generic.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39563
2014-02-10 20:30:24 +00:00
f73d6f102a
kernel: fix kmod-usb-net-smsc95xx
...
smsc95xx.ko depends on crc16.ko on kernel >= 3.8
There was an additional kmod-usb-net-smsc95xx definition in the mxs
target code which conflicted with the one in the common area.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39562
2014-02-10 20:12:13 +00:00
3a347e3b2a
phy-omap-control.ko is already part of a different package
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39560
2014-02-10 15:29:11 +00:00
7b844260fa
additional omap/musb related fixes
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39559
2014-02-10 14:40:27 +00:00
0a6385e942
fixup ethernet gadget, disable EEM support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39558
2014-02-10 14:38:22 +00:00
c48e13cc9d
package the driver for smsc95xx chips
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39556
2014-02-10 14:34:08 +00:00
18675e9ea6
add additional omap related changes
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39555
2014-02-09 17:08:33 +00:00
6daafb74b9
additional musb fixups
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39554
2014-02-09 16:14:30 +00:00
6b62eef492
musb depends on usb-gadget support
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39550
2014-02-09 14:24:28 +00:00
31a76badcb
use musb in PIO mode, as DMA support is platform dependent
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39549
2014-02-09 14:08:10 +00:00
8be96490d6
add more musb symbols
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39548
2014-02-09 14:02:59 +00:00
f198091074
make musb available for omap as well
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39546
2014-02-09 13:36:10 +00:00
ba6eb9a22c
rename Kconfig symbol to the current one
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39544
2014-02-09 13:02:17 +00:00
98e4ca00ed
move some omap24xx modules to the generic Makefile
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39543
2014-02-09 13:01:00 +00:00
579e7d673b
kernel: add kmod-usb-net-kalmia
...
This patch adds a new kernel module for Samsung USB LTE modems.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 39535
2014-02-08 16:54:44 +00:00
8f0ffe9cc6
kernel: negate kernel version dependencies to fix config for new kernel versions
...
This fixes some problems on kernel 3.13 and also removes the reference to LINUX_3_7.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39532
2014-02-08 15:34:12 +00:00
274c16e81e
mac80211: add led_trigger_blink{_oneshot}()
...
When led support is deactivated in the kernel and
CPTCFG_BACKPORT_BUILD_LEDS is set mac80211 references
led_trigger_blink_oneshot() but it is not declared anywhere.
This fixes the following build error:
net/mac80211/led.c: In function 'ieee80211_led_rx':
net/mac80211/led.c:25:2: error: implicit declaration of function 'led_trigger_blink_oneshot' [-Werror=implicit-function-declaration]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39530
2014-02-08 12:19:22 +00:00
06689aa5ed
acx-mac80211: really fix the build
...
The fix in r39482 was wrong.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39528
2014-02-08 11:30:20 +00:00
da3053f25a
ath9k: merge tx iq calibration fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39527
2014-02-07 18:08:57 +00:00
11155b27ad
fix wl12xx compile error introduced in [39428]
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39506
2014-02-06 18:29:44 +00:00
55f1e68c74
kernel: kmod-fs-jfs
...
This patch adds journaled file system (JFS) kernel module support.
Signed-off-by: Gerald Matzka<mgerald21@yahoo.de>
SVN-Revision: 39484
2014-02-05 20:11:58 +00:00
f0985524d1
acx-mac80211: fix build after recent mac80211 update and refresh patches
...
This was only build tested.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39482
2014-02-05 20:02:48 +00:00
84bf8e1f1a
linux: don't break kmod-fs-nfs for Kernels < 3.6.x
...
SVN-Revision: 39462
2014-02-04 15:55:03 +00:00
bc5b6efe23
linux: fix kmod-fs-nfs to include nfsv3.ko, it was split out of nfs.ko in Linux 3.6
...
SVN-Revision: 39459
2014-02-04 12:50:59 +00:00
38587f87ed
wifi: Introduce 802.11ac support
...
This patch introduces 802.11ac support to mac80211 and hostapd. The split of
VHT160 in two 80 MHz bands is not yet supported, since it requires an
additional user supplied parameter for the channel of the second band.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
[sven@open-mesh.com: Rebased patch, merged htmode and vhtmode,
removed special hwmode, replaced uci vht_capab list with overwritable
autoconfig, fixed hostapd integration, fixed commit description, add HT40+/-
for VHT modes, add VHT40 center_freq autoconfig, refactored major parts]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 39456
2014-02-03 13:31:44 +00:00
169213a1b4
ath9k: merge a tx power handling fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39455
2014-02-03 10:53:24 +00:00
6106bdd002
mac80211: fix basic rate list processing in ad-hoc mode
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39450
2014-02-02 14:25:09 +00:00
c95698e596
mac80211: fix processing of the distance option ( #14893 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39447
2014-02-02 14:02:56 +00:00
b9a605b8bf
mac80211: merge upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39442
2014-02-01 15:33:04 +00:00
68cd44f975
ath9k: fix handling of the default chip pci id on ar93xx ( #14886 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39432
2014-01-31 11:05:21 +00:00
bb8c34d98c
kernel/modules: add xen-privcmd package
...
Also select that for kmod-xen-fs. Fixes the following build
error:
Package kmod-xen-fs is missing dependencies for the following libraries:
xen-privcmd.ko
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39430
2014-01-30 17:08:03 +00:00
9abf24166a
mac80211: refresh tarball with a newer backports version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39428
2014-01-30 15:55:59 +00:00
eb7a1ba94b
mac80211: update to wireless-testing 2014-01-23
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39427
2014-01-30 13:21:36 +00:00
384a662e05
lantiq: fix unaligned access in vdsl firmware extractor
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39356
2014-01-21 09:51:16 +00:00
33dc3f2488
kernel: add usb3 module definitions
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39331
2014-01-19 17:27:40 +00:00
45e3898a11
gpio-button-hotplug: add wwan button
...
The wimax key will be used as a generic wwan key starting with Linux
3.13. The brcm47xx target uses this key for the 3g buttons. Also remove
the ifdef around KEY_WPS_BUTTON, this is in the kernel for a long time
now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39290
2014-01-14 23:11:10 +00:00
bf662d7cb0
packages: kernel: reverse kernel dependencies logic
...
This will select the correct dependencies also for more recent kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39289
2014-01-14 22:51:30 +00:00
795db05efb
ipt-tproxy: nf_tproxy_core was moved out of 3.12, adding a check for kernel version
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39287
2014-01-14 14:09:35 +00:00
9a1e392592
fix 3.12 dependencies
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39275
2014-01-13 15:47:15 +00:00
7987b3aa4d
broadcom-diag: remove devices already supported by the kernel
...
This driver will soon be removed completely and the scripts are already
using the new API.
This also removes bcm57xx_init() which restarts the switch and is now
done by b53.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39257
2014-01-12 18:57:16 +00:00
30cf6f5815
brcm47xx: update some patches to versions in linux mainline
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39251
2014-01-12 18:54:38 +00:00
2bf5a25f87
mac80211: enable ralink ap+sta support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39239
2014-01-12 12:07:51 +00:00
c1a2a87f3a
netifd: fix mac80211.sh to respect setting of mcast_rate
...
This patch fixes a bug in /lib/netifd/wireless/mac80211.sh, where
the UCI setting of wireless multicast traffic (in uci: mcast_rate)
is not respected within netifd. Especially in Freifunk mesh networks
the olsr routing as effected by this, as only the lowest mcast_rate
was used, even when uci ncast_rate was set to something else.
In function mac80211_setup_adhoc() the value of mcast_rate is missing
in json_get_vars.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
SVN-Revision: 39232
2014-01-12 12:07:15 +00:00
bdb1865236
lantiq: fix atm compile
...
https://dev.openwrt.org/ticket/14633
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39226
2014-01-12 12:06:47 +00:00
8384c0dba0
ath9k: add workaround for AR9331 USB host controller hang with USB1.1 devices
...
When wifi radio is reset, some bits in (undocumented) USB registers may
flip. Patch adds setting them after radio reset (channel change, up/down).
With this patch stability of USB1.1 full-speed devices, connected directly
to AR9331 host port (no USB2.0 hub) is improved.
See "ar9331's usb stability issue" OpenWrt forum thread for details:
<https://forum.openwrt.org/viewtopic.php?id=39956 >
Based on QCA's Open HAL WAR_USB_DISABLE_PLL_LOCK_DETECT() macro:
<https://github.com/qca/qcamain_open_hal_public/blob/master/hal/ar9300/ar9300_reset.c#L74 >
Adapted to Linux mac80211 driver for 8Devices Carambola2 board by Mantas Pucka:
<b08b59ceb4
2014-01-10 09:05:31 +00:00
41cbd0a389
ath9k: merge a timer handling fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39150
2013-12-20 16:02:32 +00:00
2b22d909fd
handle new libs required for new kernels
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39142
2013-12-20 06:09:41 +00:00
bac83378e7
ath9k: merge another round of upstream (or -pending) fixes and cleanups
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39138
2013-12-19 17:18:07 +00:00
5c2aee90ac
gpio-button-hotplug: fix crash on remove
...
Don't call gpio_keys_remove recursively. Setting the platform
data to NULL triggered an oops on the second iteration, so there was
no infinate loop.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39124
2013-12-17 19:05:03 +00:00
a9376b6fdb
kernel: add rtc-ds1672 module support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39110
2013-12-17 02:47:16 +00:00
b6bcb7ff2d
hostapd: move old wifi setup scripts to hostapd-common-old
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39103
2013-12-16 18:42:43 +00:00
5d79ad06c1
mac80211: fix AP mode scanning issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39098
2013-12-16 15:45:57 +00:00
4b03d33e31
ath9k: fix interrupt storms on AR913x
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39062
2013-12-15 20:23:00 +00:00
a55649082a
ath9k: merge another round of cleanups and fixes submitted to linux-wireless
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39054
2013-12-14 17:07:08 +00:00
9084b75506
ath9k: merge an interrupt processing fix for AR5008-AR9002
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39053
2013-12-14 16:40:27 +00:00
5991eb39b9
kernel: move BLKCIPHER into crypto-core to avoid pulling in crypto-manager for arc4 (used by mac80211)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39052
2013-12-14 16:40:24 +00:00
bda5d40721
kernel: add CAN modules
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39032
2013-12-11 10:56:08 +00:00
10972d9f02
mac80211: add missing set_default to fix stray "radio0: sh: bad number" messages
...
SVN-Revision: 39028
2013-12-10 16:24:52 +00:00
bc76dec31f
gpio-button-hotplug: add irq mode to driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39021
2013-12-09 17:29:39 +00:00
98009790c6
kernel: module updates for 3.12
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39008
2013-12-09 11:30:18 +00:00
be0395261b
mac80211: fix using custom wifi-iface ifname option with netifd
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39003
2013-12-08 18:00:01 +00:00
f56030265d
mac80211: merge an ibss dfs locking fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39002
2013-12-08 14:48:34 +00:00
7a260c3620
ath9k: merge initval and tx gain table updates, calibration fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39001
2013-12-08 14:48:30 +00:00
1c1d5fac2e
mac80211: refresh patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39000
2013-12-08 14:48:25 +00:00
48b4988e55
add support for the wl18xx, split wlcore from wl12xx
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38997
2013-12-06 14:07:13 +00:00
95065c08b0
ath9k: fix length handling of unaggregated frames (might resolve some rts/cts issues)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38995
2013-12-04 22:59:36 +00:00
ee2cd0354c
mac80211: fix ad-hoc network setup with netifd ( #14564 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38993
2013-12-03 16:22:56 +00:00
498d84fc4e
netifd: add wireless configuration support and port mac80211 to the new framework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38988
2013-12-02 16:41:03 +00:00
23cd074371
mac80211: b43: improve PCIe host controller workaround
...
This is only needed by BCM4716 and not by BCM4706, I haven't seen any
problems there. Adds the write flush for some more parts where the phy
control regs are written.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38977
2013-12-01 17:23:19 +00:00
c61b38dacb
mac80211: remove DMI_EXACT_MATCH
...
DMI_EXACT_MATCH was added to the kernel in version 3.10.21 and collides
with backports version. DMI_EXACT_MATCH is only used by the intel GPU
driver which is not build by OpenWrt, so remove it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38976
2013-12-01 17:20:32 +00:00
9a0d644f9e
add device tree based initialization to wl12xx
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38933
2013-11-27 12:40:07 +00:00
4e6043e691
mac80211: include 802.11n support when wl12xx is selected
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38927
2013-11-27 12:08:38 +00:00
e1ce4331d3
ath9k: merge initval updates
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38926
2013-11-27 10:56:05 +00:00
c1aeede408
fix typo in wl128x firmware names
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38925
2013-11-27 09:02:17 +00:00
eb811eadba
wl12xx could need the wl128x firmware files, too
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38921
2013-11-26 17:46:45 +00:00
78f4ab6fc0
mac80211: merge another round of upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38918
2013-11-26 11:25:31 +00:00
15b4975925
hostapd: add support for auto-channel selection
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38915
2013-11-25 15:43:30 +00:00
48de8ed52a
kernel/modules: snd-pcm-dmaengine only if CONFIG_SND_DMAENGINE_PCM is set
...
Platforms without in-soc audio don't provide CONFIG_SND_DMAENGINE_PCM, thus
the module is not generated.
SVN-Revision: 38913
2013-11-25 14:09:48 +00:00
0707c6810a
mac80211: fix reorder issues with multicast packets (client mode)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38883
2013-11-20 17:33:50 +00:00
1a0ae39a7e
mac80211: fix an overflow issue in minstrel_ht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38882
2013-11-20 17:33:46 +00:00
7e77389bc5
mac80211: small rate control fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38874
2013-11-20 07:33:27 +00:00
03fcc9bf43
ath9k: merge a few reset / calibration fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38854
2013-11-18 19:58:53 +00:00
c9be7cfef9
mac80211: ath10k: add board.bin file again
...
This file is still needed with the new firmware.
This fixes r38835.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38843
2013-11-17 17:57:37 +00:00
df7e855df0
kernel: add vmxnet3 module
...
support VMware ethernet adapters
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 38840
2013-11-17 16:41:40 +00:00
2c26cd9bbd
mac80211: update ath10k firmware
...
Current version of ath10k in the recently updated wireless-testing
package requires a new firmware. This patch fixes the issue.
v2:
* fix (hopefully) the mangled whitespaces
* actually install the new firmware instead of the old
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 38835
2013-11-17 15:52:55 +00:00
51502a5e29
mac80211: add blink api backport
...
This patch was copied from a more recent backports versions. This fixes
a build problem with kernel < 3.6.
This closes #14475
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38833
2013-11-17 15:50:54 +00:00
d923eab86e
rt2x00: fix a crash in the recent update ( #14467 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38808
2013-11-14 20:32:36 +00:00
4a977252f5
ath9k: add a fix to improve reliability of high bitrates on AR93xx/AR95xx
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38802
2013-11-14 12:21:24 +00:00
5113f2d6c2
mac80211: merge a patch that enables DFS for ad-hoc mode
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38801
2013-11-14 12:21:19 +00:00
c43d2285e0
mac80211: update regdb.txt
...
This was copied from wireless-regdb.git commit a14052b85e5d70e37a31962a9c56c0cdbb9acafc
The passive-scan/no-ibss flag of channels 36-48 in the world regd were
removed like it was done in r32126.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38797
2013-11-13 22:36:12 +00:00
736db5f17c
upgrade linux-firmware git revision, bump package version
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38792
2013-11-13 14:47:31 +00:00
f5d8735c55
add another symbol for TI chipsets
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38791
2013-11-13 14:46:21 +00:00
5f1c42d8b6
mac80211: update to wireless-testing 2013-11-05
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38783
2013-11-12 22:11:33 +00:00
ff41e07aa2
kernel: add new core sound module snd-pcm-dmaengine.ko for 3.12 kernels and above
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38772
2013-11-12 01:09:15 +00:00
09fd5cbd4c
broadcom-diag: add Belkin F7D3302/F7D7302
...
Signed-off-by: Cody P Schafer <devel@codyps.com>
SVN-Revision: 38768
2013-11-11 23:04:23 +00:00
5c2f443075
broadcom-wl: version roll
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38765
2013-11-11 22:05:39 +00:00
1f9a4fee5a
broadcom-wl: support 'wds' interfaces on 'wl1' device
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38764
2013-11-11 22:05:20 +00:00
753d52c2a4
broadcom-wl: support probe of 'wds' devices
...
'nas' requires probe of 'wds' devices to be successful;
so don't fail them.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38763
2013-11-11 22:04:53 +00:00
697f4a19e5
broadcom-wl: fix crash when starting multiple virtual interfaces
...
When enabling multiple VIFS, the driver sometimes crashes. The frequency
of the crash increases as more VIFS are enabled.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38762
2013-11-11 22:04:26 +00:00
b98f77f3d9
broadcom-wl: perform additional cleanup on wl module unload
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38761
2013-11-11 22:03:58 +00:00
1789fda3fb
kernel: of_i2c is moved into i2c-core in 3.12, add kernel version check into modules/i2c.mk
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38760
2013-11-11 22:03:35 +00:00
df493faf12
broadcom-wl: support more virtual interfaces
...
Read the number of virtual interfaces to support from the device
capabilities; as some newer devices can support up to 16.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38759
2013-11-11 22:03:25 +00:00
c926edd72d
broadcom-wl: improve device cleanup
...
Move all device cleanup to "disable_broadcom".
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38758
2013-11-11 22:02:45 +00:00
3c2904bfb8
broadcom-wl: add support for setting H/W address
...
Some devices initialize with a default address (common to all H/W).
The address needs to be changeable so that a unique address can be
assigned to each AP.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38757
2013-11-11 22:02:14 +00:00
4ba2f2f731
broadcom-wl: eliminate 'invalid command' when setting ssid
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38756
2013-11-11 22:01:32 +00:00
5b4c8c4cc8
broadcom-wl: clean up variable definitions (broadcom.sh)
...
Specify variables as 'local' where appropriate
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38755
2013-11-11 22:01:12 +00:00
aa6a5baf88
broadcom-wl: simplify processing of 'hwmode'
...
Default gmode to "GOnly" unless explicitly overwridden. This corrects
processing for 11ng to specify "GOnly" for gmode instead of "Auto"
(which translated to "bg").
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38754
2013-11-11 22:00:39 +00:00
d1c55bb33e
broadcom-wl: shutdown 'nas' when 'wl' device is disabled
...
'nas' must be shutdown independently for each 'wl' device to properly
support devices with multiple radios. Do the shutdown when the device
is disabled instead of when it is brought up.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38753
2013-11-11 21:59:58 +00:00
091d80bea7
broadcom-wl: use a single instance of 'nas' per 'wl' device
...
A single instance of 'nas' can support multiple interfaces; there's
no need to run multiple instances.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38752
2013-11-11 21:59:34 +00:00
493f82e8ee
broadcom-wl: fix whitespace handling
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38751
2013-11-11 21:59:07 +00:00
1439dc3b9b
broadcom-wl: update description for recently added
...
Update descriptions for 'phytype' and 'band'.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38750
2013-11-11 21:58:42 +00:00
40e8eb2dda
broadcom-wl: fix band reporting
...
Modify the band reporting for broadcom devices to correctly report
HW capability. Currently, 802.11na devices report "bgn"; but should be
reporting "an".
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38749
2013-11-11 21:58:19 +00:00
cac4ccca2f
broadcom-wl: change interface names
...
'netifd' treats all devices with a "." in their name as vlan devices.
Modify the name of virtual/WDS interfaces created by broadcom-wl to use
a "-" instead of a ".", so they will be treated as simple devices
by 'netifd'.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38748
2013-11-11 21:57:26 +00:00
c36d24ec82
broadcom-wl: fix compiler warning
...
Delete the return value (nvram_exit is declared with a 'void' return).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38747
2013-11-11 21:56:45 +00:00
becac1abaf
lantiq: dont install deu test manager
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38731
2013-11-11 12:22:12 +00:00
40031fdf9b
gpio-button-hotplug: add support for sliding switches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38725
2013-11-11 12:19:06 +00:00
7f4bdaa244
depend on the correct target
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38721
2013-11-11 11:51:54 +00:00
80eb837491
broadcom-diag: fix sys button on Asus rt-n16
...
This closes : #14427 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38701
2013-11-09 20:09:21 +00:00
874650d235
brcm47xx: add detection for Linksys WRT54GS V1
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38700
2013-11-09 20:08:09 +00:00
06d0fda4d1
switch to 3.12, enable support for AM33xx/OMAP3
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38692
2013-11-08 12:44:38 +00:00
1381fa6c5c
rename the omap4 target to omap
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38691
2013-11-08 12:37:39 +00:00
0615b9d83a
mac80211: mark rt2x00 library packages as hidden, there's no point in allowing users to enable them without the packages that depend on them
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38684
2013-11-07 20:59:22 +00:00
8965a29bb0
button-hotplug: sync list of supported keys with gpio-button-hotplug
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38676
2013-11-07 12:46:20 +00:00
a02ef5d05e
kernel: fix dependencies of kmod-thermal
...
This depends on kmod-hwmon-core
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38639
2013-11-03 20:18:45 +00:00
1f3c0f9c54
kernel: fix dependencies of usb-eth-gadget
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38638
2013-11-03 20:17:52 +00:00
b81685f0a4
kernel: add missing dependency for kernel 3.12 in tg3
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38605
2013-10-30 09:50:13 +00:00
f7ccdbec75
kernel: add w1-master-mxc module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38575
2013-10-29 02:52:17 +00:00
14457da13f
gpio-button-hotplug: add support for power buttons
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38557
2013-10-28 13:45:57 +00:00
c81c814d6a
kernel: add packages for sdhci support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38549
2013-10-28 06:47:20 +00:00
3d77352390
kernel: add keyboard-imx module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38537
2013-10-25 10:29:49 +00:00
ec41ca3a47
kernel: make kmod-pcnet32 depend on kmod-mii
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38531
2013-10-25 01:47:45 +00:00
294a57822e
kernel: add mii library kernel module package
...
This package is required for network drivers such as pcnet32
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38530
2013-10-25 01:47:32 +00:00
537e301fab
ath9k: gather entropy from raw ADC I/Q samples (use the least significant bit only)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38486
2013-10-20 17:51:17 +00:00
bc3d7c2f1b
rt2800usb: merge a fix to slow down tx status polling ( #13523 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38452
2013-10-18 13:39:10 +00:00
d8311375eb
kernel: imx6: add modules needed for sgtl5000 audio codec
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38427
2013-10-16 03:25:59 +00:00
e90e74000a
rt2x00: fix rf id for rt3352 ( #14322 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38399
2013-10-14 19:40:30 +00:00
f1ea6d3c2d
ath9k: add some more pending fixes / optimizations
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38398
2013-10-14 19:38:42 +00:00
d21810a298
ath5k: fix tx status processing errors (causing packet loss and throughput issues)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38396
2013-10-14 19:20:05 +00:00
b907e95125
ath9k: reduce rx buffer allocation size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38395
2013-10-14 19:20:02 +00:00
e1523b5504
switch: remove old switch driver
...
The switch driver is not used by brcm47xx any more and can be removed,
instead of this switch driver b53 is used now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38387
2013-10-13 22:15:31 +00:00
59b362a204
mac80211: b43: fix prefix for config options
...
Config options in backports are starting with CPTCFG and not with CONFIG_.
CONFIG_B43_BCMA was never true.
This closes #13883 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38385
2013-10-13 20:25:12 +00:00
c240ee84e9
zd1201: fix url to zd1201 firmware
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38378
2013-10-12 22:36:08 +00:00
af32e63bae
lantiq: add some missing PKG_SOURCE_URLs
...
These URLs where missing and causes build failures.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38376
2013-10-12 22:33:55 +00:00
408af1f6c7
kernel: add kirkwood thermal module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38371
2013-10-12 16:26:55 +00:00
06f3f01b06
acx-mac80211: update to latest version
...
Fixes compilation for linux 3.10.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38367
2013-10-12 10:50:35 +00:00
8a240be62b
ar7-atm: fix compilation for linux 3.10
...
Update proc code to new proc_create to allow compilation with
linux 3.10+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38366
2013-10-12 10:50:19 +00:00
a3cc10cba7
ath9k: fix rx issues introduced in my last commit ( fixes #14307 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38362
2013-10-10 21:10:45 +00:00
d45a1618eb
ath9k: add some cleanups and minor fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38354
2013-10-10 14:31:22 +00:00
b814661167
mac80211: rtlwifi: Align private space in rtl_priv struct
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38346
2013-10-09 09:13:41 +00:00
925f37a5a6
kernel: dont rely on library modules to be depended on
...
fixes https://dev.openwrt.org/ticket/14257
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38341
2013-10-08 15:08:33 +00:00
c8e742a080
mac80211: wl12xx: build them again
...
WL_TI is bool but was set to =m, which deactivated it. Now it is set to
=y and should be activated in the config so the wl12xx driver gets
build.
This closes #14212 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38333
2013-10-07 22:16:17 +00:00
16675de754
mac80211: brcmfmac: BRCMFMAC_USB was not set in config
...
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38332
2013-10-07 21:49:28 +00:00
c1316c09a1
lantiq: fix ltq_ptm compile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38329
2013-10-07 20:13:32 +00:00
048fc8f0c1
ath9k: fix tx queueing issues after background scans
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38304
2013-10-05 12:12:21 +00:00
caff3b5aee
broadcom-diag: fix 'autoload' number of diag.ko
...
Change the autoload number from '5' to '05' so the module loads earlier (as intended).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38293
2013-10-02 23:14:08 +00:00
302d27f268
c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
...
This closes #14258
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38277
2013-10-01 22:41:46 +00:00
c57ac5fcb7
kernel: add industrialio-triggered-buffer.ko only when the config option is selected.
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38276
2013-10-01 22:40:32 +00:00
1158f22b02
ep93xx: fix sound dependencies for ep93xx
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38274
2013-10-01 22:38:40 +00:00
391ec155a0
kernel: lib-textsearch needs to be auto probed for amanda nat to work
...
https://dev.openwrt.org/ticket/14232
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38262
2013-09-30 20:48:12 +00:00
17be4e9d14
mac80211: add AP inactivity handling / probing fixes to improve stability
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38257
2013-09-29 19:42:00 +00:00
f07713f7cf
mac80211: really fix the long standing wds ap tx power regression ( #14153 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38255
2013-09-29 12:53:21 +00:00
2beabf6c11
ath9k: fix an AP mode powersave issue with aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38249
2013-09-29 11:07:58 +00:00
32d54de3b9
kernel: disable kmod-iio for linux 3.6 as well (to avoid build issues due to missing config symbol changes)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38247
2013-09-28 05:22:05 +00:00
e2420239ae
kernel: exclude regmap-spi.ko if SPI support cannot be selected
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38245
2013-09-27 21:12:15 +00:00
1f037b5248
kernel: make sound-soc-core depend on kmod-ac97
...
it has a conditional #ifdef based dependency on it, which trips up on
some targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38242
2013-09-27 21:12:04 +00:00
3c045e9933
kernel: remove old kernel compat code for pcmcia
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38239
2013-09-27 20:47:09 +00:00
e232a92c08
kernel: mark kmod-thermal menuconfig symbol as hidden to avoid building it on targets with no thermal drivers
...
Should fix build errors with Linux 3.3/3.6 targets, which use different
kconfig symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38238
2013-09-27 20:44:11 +00:00
eb486aadb8
kernel: add thermal modules
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38230
2013-09-27 10:49:33 +00:00
7530971113
package/kernel: add support for industrial-io and AD799x
...
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
4fcc9ce9ff
package/kernel: add hwmon driver for ADT7410
...
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38186
2013-09-25 18:00:34 +00:00
6ac0dfb280
package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
...
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38185
2013-09-25 18:00:33 +00:00
9d24525b1d
kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38055
2013-09-19 06:33:53 +00:00
5799adc238
lantiq: fix bug in hcd gpio detetcion code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38043
2013-09-18 16:31:49 +00:00
4c52ed50d7
brcm47xx: update board detection patches
...
This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38036
2013-09-18 14:33:54 +00:00
50bc1a7593
ath9k: add missing tx locking
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38034
2013-09-18 13:24:55 +00:00
1878a3d6ab
lantiq: add v3.10 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
2b0cb17d42
lantiq: update packages for v3.10
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38028
2013-09-17 21:45:56 +00:00
f12f4074af
kernel: make most modules use AutoProbe
...
now that we have modprobe we can set more than half of the modules to AutoProbe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
b3ceaf834d
ath9k: merge a fix for PS-Poll responses + aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38017
2013-09-17 10:07:56 +00:00
5d8cdd84e8
kernel: fix config symbol for kmod-crypto-hash
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38015
2013-09-17 09:54:05 +00:00
fd44388bbf
mac80211: drop spoofed packets in ad-hoc mode ( fixes #12427 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38013
2013-09-17 09:17:40 +00:00
bf8cf89fc9
broadcom-diag: add GPIO configuration for Linksys E2000 V1
...
Thank you Javier Achirica for the patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38008
2013-09-16 19:52:23 +00:00
2b4e96fe09
broadcom-diag: Add WRT310N v1 gpio leds and buttons
...
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38007
2013-09-16 19:50:14 +00:00
86405f2c4c
brcm47xx: add detection code for Huawei E970
...
This is based on a patch by Mathias Adam.
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38001
2013-09-15 17:00:45 +00:00
7a704be4bb
ath9k: add another minor tx path fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37985
2013-09-14 15:30:13 +00:00
6eeb0261e6
ath9k: merge a fix for tx processing issues with aggregation
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37982
2013-09-14 14:46:39 +00:00
0c597a8f53
kernel: add missing config option
...
SVN-Revision: 37978
2013-09-13 20:39:23 +00:00
b73b915c54
brcm47xx: board detection, GPIO for Linksys E1000 V2.1
...
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.
This fixes bug #14135 . Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.
Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
6c14f5f3a6
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
...
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37970
2013-09-13 16:00:52 +00:00
15ea1a6d66
kernel: gsc depends on kmod-i2c-core
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37960
2013-09-12 23:38:54 +00:00
e4c837f6d6
kernel: fix imx sata module
...
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37950
2013-09-11 22:08:46 +00:00
a43c2d4e6f
kernel: add imx sata module
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37937
2013-09-10 22:26:37 +00:00
7d73153e86
kernel: allow hwmon GSC driver for all targets
...
- enable using hwmon GSC driver on all targets
- add a kmod package for it
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
247299bfa0
rt2x00: merge an rt2800 initialization order fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37922
2013-09-09 17:31:53 +00:00
768e6750d7
ath9k: clean up some patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37919
2013-09-08 09:38:38 +00:00
249c396583
mac80211: merge a big batch of upstream changes/improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37918
2013-09-08 09:38:32 +00:00
bdc04e379f
mac80211: kmod-rtl_pci: fix dependencies
...
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
f9b790bd55
kernel: kmod-libphy, kmod-tg3: fix load order
...
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
9af52f3a2c
kernel: kmod-ssb, kmod-b44: fix load order
...
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
fd561a47c5
kernel: kmod-firewire: fix dependencies
...
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
11ae55cc95
mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
...
linux-firemware contains the same version we loaded without this patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
14a65f1cfb
kernel: kmod-fs-xfs: fix dependencies
...
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
09a55136d7
kernel: kmod-usb-serial-keyspan: fix dependencies
...
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
82a2969100
ath10k: enable Atheros 802.11ac driver
...
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.
This goes build tested, not run time tested.
[Hauke: I did some minor changes]
Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
b85c090177
package/rotary-gpio-custom: fix checkpatch errors module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37875
2013-09-02 08:45:32 +00:00
1928106d0d
package/w1-gpio-custom: fix checkpatch errors in module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37874
2013-09-02 08:45:31 +00:00
f18a0d9547
package/i2c-gpio-custom: fix checkpatch errors in module source
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37873
2013-09-02 08:45:30 +00:00
6bb50e4df1
package/kernel: add spi-gpio-custom module
...
The package makes it possible to create custom SPI
buses via GPIO lines.
This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.
Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
- change subject,
- extend and reformat commit message,
- cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37872
2013-09-02 08:45:29 +00:00
0a85c59040
netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration
...
SVN-Revision: 37866
2013-09-01 17:59:48 +00:00
6c29525f42
mac80211: add a bunch of rt2x00 specific changes
...
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.
Also refresh the rt2x00 specific patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37843
2013-08-27 10:44:06 +00:00
eaa8cb7834
mac80211: merge a few ad-hoc mode fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37840
2013-08-26 17:31:23 +00:00
9cf157ac75
mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37839
2013-08-26 17:31:15 +00:00
b04baf0d0c
crypto: add missing depends for crypto-manager
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37817
2013-08-21 00:36:19 +00:00
2fc0c28345
broadcom-diag: remove BUFFALO_UNKNOWN
...
This was itriggered by to many non buffalo devices
This closes #14043 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37804
2013-08-17 13:43:07 +00:00
e12b5ec8df
broadcom-wl: Add 'N' mode support to broadcom-wl
...
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html ).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37802
2013-08-17 13:38:30 +00:00
d03d3aa58c
mac80211: merge upstream change to fix mesh rssi thresholds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37793
2013-08-15 13:57:11 +00:00
bbf4412bee
ath9k: merge a few more cleanups/fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37767
2013-08-13 10:35:18 +00:00
253d2b511b
ath9k: reorganize patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37766
2013-08-13 10:35:14 +00:00
ead5aa354c
mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with fixed-freq, fixed-bssid
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37764
2013-08-13 10:35:04 +00:00
acb9bc0f5e
kernel: remove imx-sdma-fw because of license issues
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37755
2013-08-12 10:48:05 +00:00
556e850dfd
kernel: add imx-sdma-fw package
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37753
2013-08-11 15:10:42 +00:00
fd586c0275
ath9k: fix an rx descriptor processing race condition
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37746
2013-08-10 14:00:33 +00:00
39ab281fae
mac80211: Handle concurrent AP/STA beaconing properly
...
Use the "start_disabled" option in hostapd that was added
in the earlier patch.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
SVN-Revision: 37732
2013-08-06 17:59:09 +00:00
bdb2859a48
ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37716
2013-08-06 10:31:10 +00:00
5bce86faa2
mac80211: refresh a patch that was using the wrong patch style
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37715
2013-08-06 10:31:06 +00:00
48b3b74da7
mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37714
2013-08-06 10:31:02 +00:00
592f2c6e2b
ath9k: add some more fixes for the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
2013-08-06 10:30:58 +00:00
3f351e2770
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
9d4145efe5
kernel: fix DMA error when BCM4331 is connected to BCM4706
...
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
6743f2625b
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
2013-08-05 10:32:13 +00:00
259c36358f
mac80211: fix rt2x00 dependency
...
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
885cf1f19f
mac80211: rt2x00: fix LED polarity patch
...
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
2013-08-05 09:09:41 +00:00
3573494b19
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
...
Closes #13951 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
c7976ae5f8
mac80211: add rtlwifi drivers
...
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
2fcaba306e
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
2013-08-04 12:36:13 +00:00
0d9ecfa564
kernel: kmod-appletalk: fix dependencies
...
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
2013-08-04 09:51:07 +00:00
7dea39fda2
broadcom-diag: show error message in case something goes wrong with gpio irq
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
2013-08-03 17:12:07 +00:00
309123bbfd
broadcom-diag: add gpio config for Asus RT-N66U
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
2013-08-03 17:10:37 +00:00
b1b3067a12
broadcom-diag: add gpio config for Linksys E4200v1
...
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
2013-08-03 17:09:39 +00:00
18e37d8caf
gpio-button-hotplug: cleanup, fix compiler warning
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
2013-08-03 11:56:27 +00:00
4281026dda
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
2013-08-03 11:49:50 +00:00
Felix Fietkau
Jonas Gorski
John Crispin
Jo-Philipp Wich
Imre Kaloz
Florian Fainelli
Hauke Mehrtens
Nicolas Thill
Gabor Juhos
Zoltan Herpai
Luka Perkov
Steven Barth