add add new firmware support and additional fixes for wl18xx

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39947
owl
Imre Kaloz 2014-03-18 18:55:54 +00:00
parent aabce5cf6a
commit 531dc9fe42
21 changed files with 2211 additions and 3 deletions

View File

@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=2014-01-23.1
PKG_RELEASE:=2
PKG_RELEASE:=3
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_BACKPORT_VERSION:=
PKG_MD5SUM:=8db16edbdaf4abc2e9c2f3b6c86736a6
@ -1629,8 +1629,7 @@ define KernelPackage/wl18xx/install
$(INSTALL_DIR) $(1)/lib/firmware/ti-connectivity
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-conf.bin \
$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw.bin \
$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw-2.bin \
$(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/ti-connectivity/wl18xx-fw-3.bin \
$(1)/lib/firmware/ti-connectivity
endef

View File

@ -0,0 +1,73 @@
zero rx_filter_enabled array after recovery to avoid
cases were the driver will keep trying to clear a
filter which is not configured in FW.
Such case will cause consecutive recoveries due to
command execution failures.
While on it, convert rx_filter_enabled to bitmap,
to save some memory and make sparse happy (it
doesn't like sizeof(bool array)).
Signed-off-by: Nadim Zubidat <nadimz@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 1 +
drivers/net/wireless/ti/wlcore/rx.c | 9 ++++++---
drivers/net/wireless/ti/wlcore/wlcore.h | 2 +-
3 files changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1914,6 +1914,7 @@ static void wlcore_op_stop_locked(struct
memset(wl->links_map, 0, sizeof(wl->links_map));
memset(wl->roc_map, 0, sizeof(wl->roc_map));
memset(wl->session_ids, 0, sizeof(wl->session_ids));
+ memset(wl->rx_filter_enabled, 0, sizeof(wl->rx_filter_enabled));
wl->active_sta_count = 0;
wl->active_link_count = 0;
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -302,7 +302,7 @@ int wl1271_rx_filter_enable(struct wl127
{
int ret;
- if (wl->rx_filter_enabled[index] == enable) {
+ if (!!test_bit(index, wl->rx_filter_enabled) == enable) {
wl1271_warning("Request to enable an already "
"enabled rx filter %d", index);
return 0;
@@ -316,7 +316,10 @@ int wl1271_rx_filter_enable(struct wl127
return ret;
}
- wl->rx_filter_enabled[index] = enable;
+ if (enable)
+ __set_bit(index, wl->rx_filter_enabled);
+ else
+ __clear_bit(index, wl->rx_filter_enabled);
return 0;
}
@@ -326,7 +329,7 @@ int wl1271_rx_filter_clear_all(struct wl
int i, ret = 0;
for (i = 0; i < WL1271_MAX_RX_FILTERS; i++) {
- if (!wl->rx_filter_enabled[i])
+ if (!test_bit(i, wl->rx_filter_enabled))
continue;
ret = wl1271_rx_filter_enable(wl, i, 0, NULL);
if (ret)
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -453,7 +453,7 @@ struct wl1271 {
size_t fw_status_priv_len;
/* RX Data filter rule state - enabled/disabled */
- bool rx_filter_enabled[WL1271_MAX_RX_FILTERS];
+ unsigned long rx_filter_enabled[BITS_TO_LONGS(WL1271_MAX_RX_FILTERS)];
/* size of the private static data */
size_t static_data_priv_len;

View File

@ -0,0 +1,73 @@
Sometimes a tx_flush during suspend fails, but the FW manages to flush
out the packets during the time when the host is supsended. Cancel
the Tx-watchdog on suspend to not cause a spurious recovery on resume
for that case. Set a flag to reinit the watchdog on the first Tx after
resume, so we'll still recover if the FW is not empty and there's
indeed a problem.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 13 +++++++++++++
drivers/net/wireless/ti/wlcore/tx.c | 9 +++++++--
drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 +
3 files changed, 21 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1767,6 +1767,12 @@ static int wl1271_op_suspend(struct ieee
flush_work(&wl->tx_work);
flush_delayed_work(&wl->elp_work);
+ /*
+ * Cancel the watchdog even if above tx_flush failed. We will detect
+ * it on resume anyway.
+ */
+ cancel_delayed_work(&wl->tx_watchdog_work);
+
return 0;
}
@@ -1824,6 +1830,13 @@ static int wl1271_op_resume(struct ieee8
out:
wl->wow_enabled = false;
+
+ /*
+ * Set a flag to re-init the watchdog on the first Tx after resume.
+ * That way we avoid possible conditions where Tx-complete interrupts
+ * fail to arrive and we perform a spurious recovery.
+ */
+ set_bit(WL1271_FLAG_REINIT_TX_WDOG, &wl->flags);
mutex_unlock(&wl->mutex);
return 0;
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -234,8 +234,13 @@ static int wl1271_tx_allocate(struct wl1
wl->tx_blocks_available -= total_blocks;
wl->tx_allocated_blocks += total_blocks;
- /* If the FW was empty before, arm the Tx watchdog */
- if (wl->tx_allocated_blocks == total_blocks)
+ /*
+ * If the FW was empty before, arm the Tx watchdog. Also do
+ * this on the first Tx after resume, as we always cancel the
+ * watchdog on suspend.
+ */
+ if (wl->tx_allocated_blocks == total_blocks ||
+ test_and_clear_bit(WL1271_FLAG_REINIT_TX_WDOG, &wl->flags))
wl12xx_rearm_tx_watchdog_locked(wl);
ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -240,6 +240,7 @@ enum wl12xx_flags {
WL1271_FLAG_VIF_CHANGE_IN_PROGRESS,
WL1271_FLAG_INTENDED_FW_RECOVERY,
WL1271_FLAG_IO_FAILED,
+ WL1271_FLAG_REINIT_TX_WDOG,
};
enum wl12xx_vif_flags {

View File

@ -0,0 +1,36 @@
When the chip is in ELP mode read/write to FW is invalid and may cause
the lower layers to get stuck. The reads/writes concerning ELP wakeup
are the exception here and are checked for. In addition to blocking the
IO, produce a warning.
Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/io.h | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/io.h
+++ b/drivers/net/wireless/ti/wlcore/io.h
@@ -60,7 +60,9 @@ static inline int __must_check wlcore_ra
{
int ret;
- if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags))
+ if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags) ||
+ WARN_ON((test_bit(WL1271_FLAG_IN_ELP, &wl->flags) &&
+ addr != HW_ACCESS_ELP_CTRL_REG)))
return -EIO;
ret = wl->if_ops->write(wl->dev, addr, buf, len, fixed);
@@ -76,7 +78,9 @@ static inline int __must_check wlcore_ra
{
int ret;
- if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags))
+ if (test_bit(WL1271_FLAG_IO_FAILED, &wl->flags) ||
+ WARN_ON((test_bit(WL1271_FLAG_IN_ELP, &wl->flags) &&
+ addr != HW_ACCESS_ELP_CTRL_REG)))
return -EIO;
ret = wl->if_ops->read(wl->dev, addr, buf, len, fixed);

View File

@ -0,0 +1,28 @@
It seems the wl18xx FW sometimes sends spurious changes on the PSM state
of the broadcast HLID. This causes us to search for a station on a
non-peer link and fail, causing warnings in our log.
Prevent the driver from considering PSM changes for any non-peer HLIDs.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/ps.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ti/wlcore/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -280,7 +280,11 @@ void wl12xx_ps_link_start(struct wl1271
struct ieee80211_sta *sta;
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
- if (test_bit(hlid, &wl->ap_ps_map))
+ if (WARN_ON_ONCE(wlvif->bss_type != BSS_TYPE_AP_BSS))
+ return;
+
+ if (!test_bit(hlid, wlvif->ap.sta_hlid_map) ||
+ test_bit(hlid, &wl->ap_ps_map))
return;
wl1271_debug(DEBUG_PSM, "start mac80211 PSM on hlid %d pkts %d "

View File

@ -0,0 +1,731 @@
Instead of splitting the fw_status into 2 and using some
complex calculations, read the fw status and let each low-level
driver (wl12xx/wl18xx) convert it into a common struct.
This is required for the upcoming fw api changes, which
break the current logic anyway.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 35 ++++++++++-
drivers/net/wireless/ti/wl12xx/wl12xx.h | 50 ++++++++++++++++
drivers/net/wireless/ti/wl18xx/main.c | 39 ++++++++++++-
drivers/net/wireless/ti/wl18xx/tx.c | 4 +-
drivers/net/wireless/ti/wl18xx/wl18xx.h | 53 +++++++++++++++++
drivers/net/wireless/ti/wlcore/cmd.c | 11 +++-
drivers/net/wireless/ti/wlcore/hw_ops.h | 9 +++
drivers/net/wireless/ti/wlcore/main.c | 96 +++++++++++++++----------------
drivers/net/wireless/ti/wlcore/rx.c | 2 +-
drivers/net/wireless/ti/wlcore/rx.h | 2 +-
drivers/net/wireless/ti/wlcore/wlcore.h | 7 ++-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 72 ++++++++++-------------
12 files changed, 277 insertions(+), 103 deletions(-)
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1378,7 +1378,7 @@ static u32 wl12xx_get_rx_packet_len(stru
static int wl12xx_tx_delayed_compl(struct wl1271 *wl)
{
- if (wl->fw_status_1->tx_results_counter ==
+ if (wl->fw_status->tx_results_counter ==
(wl->tx_results_count & 0xff))
return 0;
@@ -1438,6 +1438,37 @@ out:
return ret;
}
+static void wl12xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
+ struct wl_fw_status *fw_status)
+{
+ struct wl12xx_fw_status *int_fw_status = raw_fw_status;
+
+ fw_status->intr = le32_to_cpu(int_fw_status->intr);
+ fw_status->fw_rx_counter = int_fw_status->fw_rx_counter;
+ fw_status->drv_rx_counter = int_fw_status->drv_rx_counter;
+ fw_status->tx_results_counter = int_fw_status->tx_results_counter;
+ fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs;
+
+ fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime);
+ fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap);
+ fw_status->link_fast_bitmap =
+ le32_to_cpu(int_fw_status->link_fast_bitmap);
+ fw_status->total_released_blks =
+ le32_to_cpu(int_fw_status->total_released_blks);
+ fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total);
+
+ fw_status->counters.tx_released_pkts =
+ int_fw_status->counters.tx_released_pkts;
+ fw_status->counters.tx_lnk_free_pkts =
+ int_fw_status->counters.tx_lnk_free_pkts;
+ fw_status->counters.tx_voice_released_blks =
+ int_fw_status->counters.tx_voice_released_blks;
+ fw_status->counters.tx_last_rate =
+ int_fw_status->counters.tx_last_rate;
+
+ fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr);
+}
+
static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl,
struct wl12xx_vif *wlvif)
{
@@ -1677,6 +1708,7 @@ static struct wlcore_ops wl12xx_ops = {
.tx_delayed_compl = wl12xx_tx_delayed_compl,
.hw_init = wl12xx_hw_init,
.init_vif = NULL,
+ .convert_fw_status = wl12xx_convert_fw_status,
.sta_get_ap_rate_mask = wl12xx_sta_get_ap_rate_mask,
.get_pg_ver = wl12xx_get_pg_ver,
.get_mac = wl12xx_get_mac,
@@ -1725,6 +1757,7 @@ static int wl12xx_setup(struct wl1271 *w
wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0;
+ wl->fw_status_len = sizeof(struct wl12xx_fw_status);
wl->fw_status_priv_len = 0;
wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -79,4 +79,54 @@ struct wl12xx_priv {
struct wl127x_rx_mem_pool_addr *rx_mem_addr;
};
+struct wl12xx_fw_packet_counters {
+ /* Cumulative counter of released packets per AC */
+ u8 tx_released_pkts[NUM_TX_QUEUES];
+
+ /* Cumulative counter of freed packets per HLID */
+ u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+
+ /* Cumulative counter of released Voice memory blocks */
+ u8 tx_voice_released_blks;
+
+ /* Tx rate of the last transmitted packet */
+ u8 tx_last_rate;
+
+ u8 padding[2];
+} __packed;
+
+/* FW status registers */
+struct wl12xx_fw_status {
+ __le32 intr;
+ u8 fw_rx_counter;
+ u8 drv_rx_counter;
+ u8 reserved;
+ u8 tx_results_counter;
+ __le32 rx_pkt_descs[WL12XX_NUM_RX_DESCRIPTORS];
+
+ __le32 fw_localtime;
+
+ /*
+ * A bitmap (where each bit represents a single HLID)
+ * to indicate if the station is in PS mode.
+ */
+ __le32 link_ps_bitmap;
+
+ /*
+ * A bitmap (where each bit represents a single HLID) to indicate
+ * if the station is in Fast mode
+ */
+ __le32 link_fast_bitmap;
+
+ /* Cumulative counter of total released mem blocks since FW-reset */
+ __le32 total_released_blks;
+
+ /* Size (in Memory Blocks) of TX pool */
+ __le32 tx_total;
+
+ struct wl12xx_fw_packet_counters counters;
+
+ __le32 log_start_addr;
+} __packed;
+
#endif /* __WL12XX_PRIV_H__ */
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1133,6 +1133,39 @@ static int wl18xx_hw_init(struct wl1271
return ret;
}
+static void wl18xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
+ struct wl_fw_status *fw_status)
+{
+ struct wl18xx_fw_status *int_fw_status = raw_fw_status;
+
+ fw_status->intr = le32_to_cpu(int_fw_status->intr);
+ fw_status->fw_rx_counter = int_fw_status->fw_rx_counter;
+ fw_status->drv_rx_counter = int_fw_status->drv_rx_counter;
+ fw_status->tx_results_counter = int_fw_status->tx_results_counter;
+ fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs;
+
+ fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime);
+ fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap);
+ fw_status->link_fast_bitmap =
+ le32_to_cpu(int_fw_status->link_fast_bitmap);
+ fw_status->total_released_blks =
+ le32_to_cpu(int_fw_status->total_released_blks);
+ fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total);
+
+ fw_status->counters.tx_released_pkts =
+ int_fw_status->counters.tx_released_pkts;
+ fw_status->counters.tx_lnk_free_pkts =
+ int_fw_status->counters.tx_lnk_free_pkts;
+ fw_status->counters.tx_voice_released_blks =
+ int_fw_status->counters.tx_voice_released_blks;
+ fw_status->counters.tx_last_rate =
+ int_fw_status->counters.tx_last_rate;
+
+ fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr);
+
+ fw_status->priv = &int_fw_status->priv;
+}
+
static void wl18xx_set_tx_desc_csum(struct wl1271 *wl,
struct wl1271_tx_hw_descr *desc,
struct sk_buff *skb)
@@ -1572,7 +1605,7 @@ static bool wl18xx_lnk_high_prio(struct
{
u8 thold;
struct wl18xx_fw_status_priv *status_priv =
- (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+ (struct wl18xx_fw_status_priv *)wl->fw_status->priv;
u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
/* suspended links are never high priority */
@@ -1594,7 +1627,7 @@ static bool wl18xx_lnk_low_prio(struct w
{
u8 thold;
struct wl18xx_fw_status_priv *status_priv =
- (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+ (struct wl18xx_fw_status_priv *)wl->fw_status->priv;
u32 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap);
if (test_bit(hlid, (unsigned long *)&suspend_bitmap))
@@ -1632,6 +1665,7 @@ static struct wlcore_ops wl18xx_ops = {
.tx_immediate_compl = wl18xx_tx_immediate_completion,
.tx_delayed_compl = NULL,
.hw_init = wl18xx_hw_init,
+ .convert_fw_status = wl18xx_convert_fw_status,
.set_tx_desc_csum = wl18xx_set_tx_desc_csum,
.get_pg_ver = wl18xx_get_pg_ver,
.set_rx_csum = wl18xx_set_rx_csum,
@@ -1726,6 +1760,7 @@ static int wl18xx_setup(struct wl1271 *w
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0;
+ wl->fw_status_len = sizeof(struct wl18xx_fw_status);
wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv);
wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics);
wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv);
--- a/drivers/net/wireless/ti/wl18xx/tx.c
+++ b/drivers/net/wireless/ti/wl18xx/tx.c
@@ -32,7 +32,7 @@ static
void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif,
struct ieee80211_tx_rate *rate)
{
- u8 fw_rate = wl->fw_status_2->counters.tx_last_rate;
+ u8 fw_rate = wl->fw_status->counters.tx_last_rate;
if (fw_rate > CONF_HW_RATE_INDEX_MAX) {
wl1271_error("last Tx rate invalid: %d", fw_rate);
@@ -139,7 +139,7 @@ static void wl18xx_tx_complete_packet(st
void wl18xx_tx_immediate_complete(struct wl1271 *wl)
{
struct wl18xx_fw_status_priv *status_priv =
- (struct wl18xx_fw_status_priv *)wl->fw_status_2->priv;
+ (struct wl18xx_fw_status_priv *)wl->fw_status->priv;
struct wl18xx_priv *priv = wl->priv;
u8 i;
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -109,6 +109,59 @@ struct wl18xx_fw_status_priv {
u8 padding[3];
};
+struct wl18xx_fw_packet_counters {
+ /* Cumulative counter of released packets per AC */
+ u8 tx_released_pkts[NUM_TX_QUEUES];
+
+ /* Cumulative counter of freed packets per HLID */
+ u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+
+ /* Cumulative counter of released Voice memory blocks */
+ u8 tx_voice_released_blks;
+
+ /* Tx rate of the last transmitted packet */
+ u8 tx_last_rate;
+
+ u8 padding[2];
+} __packed;
+
+/* FW status registers */
+struct wl18xx_fw_status {
+ __le32 intr;
+ u8 fw_rx_counter;
+ u8 drv_rx_counter;
+ u8 reserved;
+ u8 tx_results_counter;
+ __le32 rx_pkt_descs[WL18XX_NUM_RX_DESCRIPTORS];
+
+ __le32 fw_localtime;
+
+ /*
+ * A bitmap (where each bit represents a single HLID)
+ * to indicate if the station is in PS mode.
+ */
+ __le32 link_ps_bitmap;
+
+ /*
+ * A bitmap (where each bit represents a single HLID) to indicate
+ * if the station is in Fast mode
+ */
+ __le32 link_fast_bitmap;
+
+ /* Cumulative counter of total released mem blocks since FW-reset */
+ __le32 total_released_blks;
+
+ /* Size (in Memory Blocks) of TX pool */
+ __le32 tx_total;
+
+ struct wl18xx_fw_packet_counters counters;
+
+ __le32 log_start_addr;
+
+ /* Private status to be used by the lower drivers */
+ struct wl18xx_fw_status_priv priv;
+} __packed;
+
#define WL18XX_PHY_VERSION_MAX_LEN 20
struct wl18xx_static_data_priv {
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -324,9 +324,14 @@ int wl12xx_allocate_link(struct wl1271 *
__set_bit(link, wlvif->links_map);
spin_unlock_irqrestore(&wl->wl_lock, flags);
- /* take the last "freed packets" value from the current FW status */
- wl->links[link].prev_freed_pkts =
- wl->fw_status_2->counters.tx_lnk_free_pkts[link];
+ /*
+ * take the last "freed packets" value from the current FW status.
+ * on recovery, we might not have fw_status yet, and
+ * tx_lnk_free_pkts will be NULL. check for it.
+ */
+ if (wl->fw_status->counters.tx_lnk_free_pkts)
+ wl->links[link].prev_freed_pkts =
+ wl->fw_status->counters.tx_lnk_free_pkts[link];
wl->links[link].wlvif = wlvif;
/*
--- a/drivers/net/wireless/ti/wlcore/hw_ops.h
+++ b/drivers/net/wireless/ti/wlcore/hw_ops.h
@@ -106,6 +106,15 @@ wlcore_hw_init_vif(struct wl1271 *wl, st
return 0;
}
+static inline void
+wlcore_hw_convert_fw_status(struct wl1271 *wl, void *raw_fw_status,
+ struct wl_fw_status *fw_status)
+{
+ BUG_ON(!wl->ops->convert_fw_status);
+
+ wl->ops->convert_fw_status(wl, raw_fw_status, fw_status);
+}
+
static inline u32
wlcore_hw_sta_get_ap_rate_mask(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -357,12 +357,12 @@ static void wl12xx_irq_ps_regulate_link(
static void wl12xx_irq_update_links_status(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
- struct wl_fw_status_2 *status)
+ struct wl_fw_status *status)
{
u32 cur_fw_ps_map;
u8 hlid;
- cur_fw_ps_map = le32_to_cpu(status->link_ps_bitmap);
+ cur_fw_ps_map = status->link_ps_bitmap;
if (wl->ap_fw_ps_map != cur_fw_ps_map) {
wl1271_debug(DEBUG_PSM,
"link ps prev 0x%x cur 0x%x changed 0x%x",
@@ -377,41 +377,38 @@ static void wl12xx_irq_update_links_stat
wl->links[hlid].allocated_pkts);
}
-static int wlcore_fw_status(struct wl1271 *wl,
- struct wl_fw_status_1 *status_1,
- struct wl_fw_status_2 *status_2)
+static int wlcore_fw_status(struct wl1271 *wl, struct wl_fw_status *status)
{
struct wl12xx_vif *wlvif;
struct timespec ts;
u32 old_tx_blk_count = wl->tx_blocks_available;
int avail, freed_blocks;
int i;
- size_t status_len;
int ret;
struct wl1271_link *lnk;
- status_len = WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
- sizeof(*status_2) + wl->fw_status_priv_len;
-
- ret = wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR, status_1,
- status_len, false);
+ ret = wlcore_raw_read_data(wl, REG_RAW_FW_STATUS_ADDR,
+ wl->raw_fw_status,
+ wl->fw_status_len, false);
if (ret < 0)
return ret;
+ wlcore_hw_convert_fw_status(wl, wl->raw_fw_status, wl->fw_status);
+
wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
"drv_rx_counter = %d, tx_results_counter = %d)",
- status_1->intr,
- status_1->fw_rx_counter,
- status_1->drv_rx_counter,
- status_1->tx_results_counter);
+ status->intr,
+ status->fw_rx_counter,
+ status->drv_rx_counter,
+ status->tx_results_counter);
for (i = 0; i < NUM_TX_QUEUES; i++) {
/* prevent wrap-around in freed-packets counter */
wl->tx_allocated_pkts[i] -=
- (status_2->counters.tx_released_pkts[i] -
+ (status->counters.tx_released_pkts[i] -
wl->tx_pkts_freed[i]) & 0xff;
- wl->tx_pkts_freed[i] = status_2->counters.tx_released_pkts[i];
+ wl->tx_pkts_freed[i] = status->counters.tx_released_pkts[i];
}
@@ -420,29 +417,28 @@ static int wlcore_fw_status(struct wl127
lnk = &wl->links[i];
/* prevent wrap-around in freed-packets counter */
- diff = (status_2->counters.tx_lnk_free_pkts[i] -
+ diff = (status->counters.tx_lnk_free_pkts[i] -
lnk->prev_freed_pkts) & 0xff;
if (diff == 0)
continue;
lnk->allocated_pkts -= diff;
- lnk->prev_freed_pkts = status_2->counters.tx_lnk_free_pkts[i];
+ lnk->prev_freed_pkts = status->counters.tx_lnk_free_pkts[i];
/* accumulate the prev_freed_pkts counter */
lnk->total_freed_pkts += diff;
}
/* prevent wrap-around in total blocks counter */
- if (likely(wl->tx_blocks_freed <=
- le32_to_cpu(status_2->total_released_blks)))
- freed_blocks = le32_to_cpu(status_2->total_released_blks) -
+ if (likely(wl->tx_blocks_freed <= status->total_released_blks))
+ freed_blocks = status->total_released_blks -
wl->tx_blocks_freed;
else
freed_blocks = 0x100000000LL - wl->tx_blocks_freed +
- le32_to_cpu(status_2->total_released_blks);
+ status->total_released_blks;
- wl->tx_blocks_freed = le32_to_cpu(status_2->total_released_blks);
+ wl->tx_blocks_freed = status->total_released_blks;
wl->tx_allocated_blocks -= freed_blocks;
@@ -458,7 +454,7 @@ static int wlcore_fw_status(struct wl127
cancel_delayed_work(&wl->tx_watchdog_work);
}
- avail = le32_to_cpu(status_2->tx_total) - wl->tx_allocated_blocks;
+ avail = status->tx_total - wl->tx_allocated_blocks;
/*
* The FW might change the total number of TX memblocks before
@@ -477,15 +473,15 @@ static int wlcore_fw_status(struct wl127
/* for AP update num of allocated TX blocks per link and ps status */
wl12xx_for_each_wlvif_ap(wl, wlvif) {
- wl12xx_irq_update_links_status(wl, wlvif, status_2);
+ wl12xx_irq_update_links_status(wl, wlvif, status);
}
/* update the host-chipset time offset */
getnstimeofday(&ts);
wl->time_offset = (timespec_to_ns(&ts) >> 10) -
- (s64)le32_to_cpu(status_2->fw_localtime);
+ (s64)(status->fw_localtime);
- wl->fw_fast_lnk_map = le32_to_cpu(status_2->link_fast_bitmap);
+ wl->fw_fast_lnk_map = status->link_fast_bitmap;
return 0;
}
@@ -549,13 +545,13 @@ static int wlcore_irq_locked(struct wl12
clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
smp_mb__after_clear_bit();
- ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+ ret = wlcore_fw_status(wl, wl->fw_status);
if (ret < 0)
goto out;
wlcore_hw_tx_immediate_compl(wl);
- intr = le32_to_cpu(wl->fw_status_1->intr);
+ intr = wl->fw_status->intr;
intr &= WLCORE_ALL_INTR_MASK;
if (!intr) {
done = true;
@@ -584,7 +580,7 @@ static int wlcore_irq_locked(struct wl12
if (likely(intr & WL1271_ACX_INTR_DATA)) {
wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
- ret = wlcore_rx(wl, wl->fw_status_1);
+ ret = wlcore_rx(wl, wl->fw_status);
if (ret < 0)
goto out;
@@ -843,11 +839,11 @@ static void wl12xx_read_fwlog_panic(stru
wl12xx_cmd_stop_fwlog(wl);
/* Read the first memory block address */
- ret = wlcore_fw_status(wl, wl->fw_status_1, wl->fw_status_2);
+ ret = wlcore_fw_status(wl, wl->fw_status);
if (ret < 0)
goto out;
- addr = le32_to_cpu(wl->fw_status_2->log_start_addr);
+ addr = wl->fw_status->log_start_addr;
if (!addr)
goto out;
@@ -990,23 +986,23 @@ static int wlcore_fw_wakeup(struct wl127
static int wl1271_setup(struct wl1271 *wl)
{
- wl->fw_status_1 = kzalloc(WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc) +
- sizeof(*wl->fw_status_2) +
- wl->fw_status_priv_len, GFP_KERNEL);
- if (!wl->fw_status_1)
- return -ENOMEM;
+ wl->raw_fw_status = kzalloc(wl->fw_status_len, GFP_KERNEL);
+ if (!wl->raw_fw_status)
+ goto err;
- wl->fw_status_2 = (struct wl_fw_status_2 *)
- (((u8 *) wl->fw_status_1) +
- WLCORE_FW_STATUS_1_LEN(wl->num_rx_desc));
+ wl->fw_status = kzalloc(sizeof(*wl->fw_status), GFP_KERNEL);
+ if (!wl->fw_status)
+ goto err;
wl->tx_res_if = kzalloc(sizeof(*wl->tx_res_if), GFP_KERNEL);
- if (!wl->tx_res_if) {
- kfree(wl->fw_status_1);
- return -ENOMEM;
- }
+ if (!wl->tx_res_if)
+ goto err;
return 0;
+err:
+ kfree(wl->fw_status);
+ kfree(wl->raw_fw_status);
+ return -ENOMEM;
}
static int wl12xx_set_power_on(struct wl1271 *wl)
@@ -1952,9 +1948,10 @@ static void wlcore_op_stop_locked(struct
wl1271_debugfs_reset(wl);
- kfree(wl->fw_status_1);
- wl->fw_status_1 = NULL;
- wl->fw_status_2 = NULL;
+ kfree(wl->raw_fw_status);
+ wl->raw_fw_status = NULL;
+ kfree(wl->fw_status);
+ wl->fw_status = NULL;
kfree(wl->tx_res_if);
wl->tx_res_if = NULL;
kfree(wl->target_mem_map);
@@ -6058,7 +6055,8 @@ int wlcore_free_hw(struct wl1271 *wl)
kfree(wl->nvs);
wl->nvs = NULL;
- kfree(wl->fw_status_1);
+ kfree(wl->raw_fw_status);
+ kfree(wl->fw_status);
kfree(wl->tx_res_if);
destroy_workqueue(wl->freezable_wq);
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -203,7 +203,7 @@ static int wl1271_rx_handle_data(struct
return is_data;
}
-int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
+int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status)
{
unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
u32 buf_size;
--- a/drivers/net/wireless/ti/wlcore/rx.h
+++ b/drivers/net/wireless/ti/wlcore/rx.h
@@ -142,7 +142,7 @@ struct wl1271_rx_descriptor {
u8 reserved;
} __packed;
-int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status);
+int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status);
u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
int wl1271_rx_filter_enable(struct wl1271 *wl,
int index, bool enable,
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -73,6 +73,8 @@ struct wlcore_ops {
void (*tx_immediate_compl)(struct wl1271 *wl);
int (*hw_init)(struct wl1271 *wl);
int (*init_vif)(struct wl1271 *wl, struct wl12xx_vif *wlvif);
+ void (*convert_fw_status)(struct wl1271 *wl, void *raw_fw_status,
+ struct wl_fw_status *fw_status);
u32 (*sta_get_ap_rate_mask)(struct wl1271 *wl,
struct wl12xx_vif *wlvif);
int (*get_pg_ver)(struct wl1271 *wl, s8 *ver);
@@ -348,8 +350,8 @@ struct wl1271 {
u32 buffer_cmd;
u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
- struct wl_fw_status_1 *fw_status_1;
- struct wl_fw_status_2 *fw_status_2;
+ void *raw_fw_status;
+ struct wl_fw_status *fw_status;
struct wl1271_tx_hw_res_if *tx_res_if;
/* Current chipset configuration */
@@ -450,6 +452,7 @@ struct wl1271 {
struct ieee80211_sta_ht_cap ht_cap[WLCORE_NUM_BANDS];
/* size of the private FW status data */
+ size_t fw_status_len;
size_t fw_status_priv_len;
/* RX Data filter rule state - enabled/disabled */
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -120,70 +120,58 @@ struct wl1271_chip {
#define AP_MAX_STATIONS 8
-struct wl_fw_packet_counters {
- /* Cumulative counter of released packets per AC */
- u8 tx_released_pkts[NUM_TX_QUEUES];
-
- /* Cumulative counter of freed packets per HLID */
- u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
-
- /* Cumulative counter of released Voice memory blocks */
- u8 tx_voice_released_blks;
-
- /* Tx rate of the last transmitted packet */
- u8 tx_last_rate;
-
- u8 padding[2];
-} __packed;
-
-/* FW status registers */
-struct wl_fw_status_1 {
- __le32 intr;
+struct wl_fw_status {
+ u32 intr;
u8 fw_rx_counter;
u8 drv_rx_counter;
- u8 reserved;
u8 tx_results_counter;
- __le32 rx_pkt_descs[0];
-} __packed;
-
-/*
- * Each HW arch has a different number of Rx descriptors.
- * The length of the status depends on it, since it holds an array
- * of descriptors.
- */
-#define WLCORE_FW_STATUS_1_LEN(num_rx_desc) \
- (sizeof(struct wl_fw_status_1) + \
- (sizeof(((struct wl_fw_status_1 *)0)->rx_pkt_descs[0])) * \
- num_rx_desc)
+ __le32 *rx_pkt_descs;
-struct wl_fw_status_2 {
- __le32 fw_localtime;
+ u32 fw_localtime;
/*
* A bitmap (where each bit represents a single HLID)
* to indicate if the station is in PS mode.
*/
- __le32 link_ps_bitmap;
+ u32 link_ps_bitmap;
/*
* A bitmap (where each bit represents a single HLID) to indicate
* if the station is in Fast mode
*/
- __le32 link_fast_bitmap;
+ u32 link_fast_bitmap;
/* Cumulative counter of total released mem blocks since FW-reset */
- __le32 total_released_blks;
+ u32 total_released_blks;
/* Size (in Memory Blocks) of TX pool */
- __le32 tx_total;
+ u32 tx_total;
- struct wl_fw_packet_counters counters;
+ struct {
+ /*
+ * Cumulative counter of released packets per AC
+ * (length of the array is NUM_TX_QUEUES)
+ */
+ u8 *tx_released_pkts;
+
+ /*
+ * Cumulative counter of freed packets per HLID
+ * (length of the array is WL12XX_MAX_LINKS)
+ */
+ u8 *tx_lnk_free_pkts;
+
+ /* Cumulative counter of released Voice memory blocks */
+ u8 tx_voice_released_blks;
+
+ /* Tx rate of the last transmitted packet */
+ u8 tx_last_rate;
+ } counters;
- __le32 log_start_addr;
+ u32 log_start_addr;
/* Private status to be used by the lower drivers */
- u8 priv[0];
-} __packed;
+ void *priv;
+};
#define WL1271_MAX_CHANNELS 64
struct wl1271_scan {

View File

@ -0,0 +1,345 @@
Upcoming fw versions will have different max links support
(according to the hw). Get ready for it by configuring
wl->num_links per-hw, instead of using the const WL12XX_MAX_LINKS.
However, continue using WLCORE_MAX_LINKS in order to simplify
structs declarations (we use it in multiple bitmaps, and converting
them to dynamic arrays is just cumbersome).
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 3 +++
drivers/net/wireless/ti/wl12xx/wl12xx.h | 2 ++
drivers/net/wireless/ti/wl18xx/main.c | 3 +++
drivers/net/wireless/ti/wl18xx/wl18xx.h | 4 +++-
drivers/net/wireless/ti/wlcore/cmd.c | 4 ++--
drivers/net/wireless/ti/wlcore/event.c | 4 ++--
drivers/net/wireless/ti/wlcore/main.c | 12 ++++++++----
drivers/net/wireless/ti/wlcore/rx.c | 8 ++++----
drivers/net/wireless/ti/wlcore/tx.c | 20 ++++++++++----------
drivers/net/wireless/ti/wlcore/wlcore.h | 8 +++++---
drivers/net/wireless/ti/wlcore/wlcore_i.h | 13 +++++++++----
11 files changed, 51 insertions(+), 30 deletions(-)
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1749,9 +1749,12 @@ static int wl12xx_setup(struct wl1271 *w
struct wlcore_platdev_data *pdev_data = dev_get_platdata(&wl->pdev->dev);
struct wl12xx_platform_data *pdata = pdev_data->pdata;
+ BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS);
+
wl->rtable = wl12xx_rtable;
wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
+ wl->num_links = WL12XX_MAX_LINKS;
wl->num_channels = 1;
wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -65,6 +65,8 @@
#define WL12XX_RX_BA_MAX_SESSIONS 3
+#define WL12XX_MAX_LINKS 12
+
struct wl127x_rx_mem_pool_addr {
u32 addr;
u32 addr_extra;
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1752,9 +1752,12 @@ static int wl18xx_setup(struct wl1271 *w
struct wl18xx_priv *priv = wl->priv;
int ret;
+ BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
+
wl->rtable = wl18xx_rtable;
wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
+ wl->num_links = WL18XX_MAX_LINKS;
wl->num_channels = 2;
wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -42,6 +42,8 @@
#define WL18XX_RX_BA_MAX_SESSIONS 5
+#define WL18XX_MAX_LINKS 12
+
struct wl18xx_priv {
/* buffer for sending commands to FW */
u8 cmd_buf[WL18XX_CMD_MAX_SIZE];
@@ -114,7 +116,7 @@ struct wl18xx_fw_packet_counters {
u8 tx_released_pkts[NUM_TX_QUEUES];
/* Cumulative counter of freed packets per HLID */
- u8 tx_lnk_free_pkts[WL12XX_MAX_LINKS];
+ u8 tx_lnk_free_pkts[WL18XX_MAX_LINKS];
/* Cumulative counter of released Voice memory blocks */
u8 tx_voice_released_blks;
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -312,8 +312,8 @@ static int wlcore_get_new_session_id(str
int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid)
{
unsigned long flags;
- u8 link = find_first_zero_bit(wl->links_map, WL12XX_MAX_LINKS);
- if (link >= WL12XX_MAX_LINKS)
+ u8 link = find_first_zero_bit(wl->links_map, wl->num_links);
+ if (link >= wl->num_links)
return -EBUSY;
wl->session_ids[link] = wlcore_get_new_session_id(wl, link);
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -68,7 +68,7 @@ static void wl1271_stop_ba_event(struct
u8 hlid;
struct wl1271_link *lnk;
for_each_set_bit(hlid, wlvif->ap.sta_hlid_map,
- WL12XX_MAX_LINKS) {
+ wl->num_links) {
lnk = &wl->links[hlid];
if (!lnk->ba_bitmap)
continue;
@@ -173,7 +173,7 @@ static void wlcore_disconnect_sta(struct
const u8 *addr;
int h;
- for_each_set_bit(h, &sta_bitmap, WL12XX_MAX_LINKS) {
+ for_each_set_bit(h, &sta_bitmap, wl->num_links) {
bool found = false;
/* find the ap vif connected to this sta */
wl12xx_for_each_wlvif_ap(wl, wlvif) {
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -372,7 +372,7 @@ static void wl12xx_irq_update_links_stat
wl->ap_fw_ps_map = cur_fw_ps_map;
}
- for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, WL12XX_MAX_LINKS)
+ for_each_set_bit(hlid, wlvif->ap.sta_hlid_map, wl->num_links)
wl12xx_irq_ps_regulate_link(wl, wlvif, hlid,
wl->links[hlid].allocated_pkts);
}
@@ -412,7 +412,7 @@ static int wlcore_fw_status(struct wl127
}
- for_each_set_bit(i, wl->links_map, WL12XX_MAX_LINKS) {
+ for_each_set_bit(i, wl->links_map, wl->num_links) {
u8 diff;
lnk = &wl->links[i];
@@ -5888,7 +5888,7 @@ struct ieee80211_hw *wlcore_alloc_hw(siz
int i, j, ret;
unsigned int order;
- BUILD_BUG_ON(AP_MAX_STATIONS > WL12XX_MAX_LINKS);
+ BUILD_BUG_ON(AP_MAX_STATIONS > WLCORE_MAX_LINKS);
hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
if (!hw) {
@@ -5911,8 +5911,12 @@ struct ieee80211_hw *wlcore_alloc_hw(siz
wl->hw = hw;
+ /*
+ * wl->num_links is not configured yet, so just use WLCORE_MAX_LINKS.
+ * we don't allocate any additional resource here, so that's fine.
+ */
for (i = 0; i < NUM_TX_QUEUES; i++)
- for (j = 0; j < WL12XX_MAX_LINKS; j++)
+ for (j = 0; j < WLCORE_MAX_LINKS; j++)
skb_queue_head_init(&wl->links[j].tx_queue[i]);
skb_queue_head_init(&wl->deferred_rx_queue);
--- a/drivers/net/wireless/ti/wlcore/rx.c
+++ b/drivers/net/wireless/ti/wlcore/rx.c
@@ -205,7 +205,7 @@ static int wl1271_rx_handle_data(struct
int wlcore_rx(struct wl1271 *wl, struct wl_fw_status *status)
{
- unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
+ unsigned long active_hlids[BITS_TO_LONGS(WLCORE_MAX_LINKS)] = {0};
u32 buf_size;
u32 fw_rx_counter = status->fw_rx_counter % wl->num_rx_desc;
u32 drv_rx_counter = wl->rx_counter % wl->num_rx_desc;
@@ -263,12 +263,12 @@ int wlcore_rx(struct wl1271 *wl, struct
wl->aggr_buf + pkt_offset,
pkt_len, rx_align,
&hlid) == 1) {
- if (hlid < WL12XX_MAX_LINKS)
+ if (hlid < wl->num_links)
__set_bit(hlid, active_hlids);
else
WARN(1,
- "hlid exceeded WL12XX_MAX_LINKS "
- "(%d)\n", hlid);
+ "hlid (%d) exceeded MAX_LINKS\n",
+ hlid);
}
wl->rx_counter++;
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -565,11 +565,11 @@ static struct sk_buff *wlcore_vif_dequeu
int i, h, start_hlid;
/* start from the link after the last one */
- start_hlid = (wlvif->last_tx_hlid + 1) % WL12XX_MAX_LINKS;
+ start_hlid = (wlvif->last_tx_hlid + 1) % wl->num_links;
/* dequeue according to AC, round robin on each link */
- for (i = 0; i < WL12XX_MAX_LINKS; i++) {
- h = (start_hlid + i) % WL12XX_MAX_LINKS;
+ for (i = 0; i < wl->num_links; i++) {
+ h = (start_hlid + i) % wl->num_links;
/* only consider connected stations */
if (!test_bit(h, wlvif->links_map))
@@ -693,8 +693,8 @@ static void wl1271_skb_queue_head(struct
skb_queue_head(&wl->links[hlid].tx_queue[q], skb);
/* make sure we dequeue the same packet next time */
- wlvif->last_tx_hlid = (hlid + WL12XX_MAX_LINKS - 1) %
- WL12XX_MAX_LINKS;
+ wlvif->last_tx_hlid = (hlid + wl->num_links - 1) %
+ wl->num_links;
}
spin_lock_irqsave(&wl->wl_lock, flags);
@@ -727,7 +727,7 @@ void wl12xx_rearm_rx_streaming(struct wl
timeout = wl->conf.rx_streaming.duration;
wl12xx_for_each_wlvif_sta(wl, wlvif) {
bool found = false;
- for_each_set_bit(hlid, active_hlids, WL12XX_MAX_LINKS) {
+ for_each_set_bit(hlid, active_hlids, wl->num_links) {
if (test_bit(hlid, wlvif->links_map)) {
found = true;
break;
@@ -764,7 +764,7 @@ int wlcore_tx_work_locked(struct wl1271
struct wl1271_tx_hw_descr *desc;
u32 buf_offset = 0, last_len = 0;
bool sent_packets = false;
- unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
+ unsigned long active_hlids[BITS_TO_LONGS(WLCORE_MAX_LINKS)] = {0};
int ret = 0;
int bus_ret = 0;
u8 hlid;
@@ -1066,7 +1066,7 @@ void wl12xx_tx_reset_wlvif(struct wl1271
int i;
/* TX failure */
- for_each_set_bit(i, wlvif->links_map, WL12XX_MAX_LINKS) {
+ for_each_set_bit(i, wlvif->links_map, wl->num_links) {
if (wlvif->bss_type == BSS_TYPE_AP_BSS &&
i != wlvif->ap.bcast_hlid && i != wlvif->ap.global_hlid) {
/* this calls wl12xx_free_link */
@@ -1090,7 +1090,7 @@ void wl12xx_tx_reset(struct wl1271 *wl)
/* only reset the queues if something bad happened */
if (wl1271_tx_total_queue_count(wl) != 0) {
- for (i = 0; i < WL12XX_MAX_LINKS; i++)
+ for (i = 0; i < wl->num_links; i++)
wl1271_tx_reset_link_queues(wl, i);
for (i = 0; i < NUM_TX_QUEUES; i++)
@@ -1183,7 +1183,7 @@ void wl1271_tx_flush(struct wl1271 *wl)
WL1271_TX_FLUSH_TIMEOUT / 1000);
/* forcibly flush all Tx buffers on our queues */
- for (i = 0; i < WL12XX_MAX_LINKS; i++)
+ for (i = 0; i < wl->num_links; i++)
wl1271_tx_reset_link_queues(wl, i);
out_wake:
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -224,7 +224,7 @@ struct wl1271 {
int channel;
u8 system_hlid;
- unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)];
+ unsigned long links_map[BITS_TO_LONGS(WLCORE_MAX_LINKS)];
unsigned long roles_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
unsigned long roc_map[BITS_TO_LONGS(WL12XX_MAX_ROLES)];
unsigned long rate_policies_map[
@@ -232,7 +232,7 @@ struct wl1271 {
unsigned long klv_templates_map[
BITS_TO_LONGS(WLCORE_MAX_KLV_TEMPLATES)];
- u8 session_ids[WL12XX_MAX_LINKS];
+ u8 session_ids[WLCORE_MAX_LINKS];
struct list_head wlvif_list;
@@ -380,7 +380,7 @@ struct wl1271 {
* AP-mode - links indexed by HLID. The global and broadcast links
* are always active.
*/
- struct wl1271_link links[WL12XX_MAX_LINKS];
+ struct wl1271_link links[WLCORE_MAX_LINKS];
/* number of currently active links */
int active_link_count;
@@ -438,6 +438,8 @@ struct wl1271 {
u32 num_tx_desc;
/* number of RX descriptors the HW supports. */
u32 num_rx_desc;
+ /* number of links the HW supports */
+ u8 num_links;
/* translate HW Tx rates to standard rate-indices */
const u8 **band_rate_to_idx;
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -58,10 +58,15 @@
#define WL1271_DEFAULT_DTIM_PERIOD 1
#define WL12XX_MAX_ROLES 4
-#define WL12XX_MAX_LINKS 12
#define WL12XX_INVALID_ROLE_ID 0xff
#define WL12XX_INVALID_LINK_ID 0xff
+/*
+ * max number of links allowed by all HWs.
+ * this is NOT the actual max links supported by the current hw.
+ */
+#define WLCORE_MAX_LINKS 12
+
/* the driver supports the 2.4Ghz and 5Ghz bands */
#define WLCORE_NUM_BANDS 2
@@ -156,7 +161,7 @@ struct wl_fw_status {
/*
* Cumulative counter of freed packets per HLID
- * (length of the array is WL12XX_MAX_LINKS)
+ * (length of the array is wl->num_links)
*/
u8 *tx_lnk_free_pkts;
@@ -357,7 +362,7 @@ struct wl12xx_vif {
/* HLIDs bitmap of associated stations */
unsigned long sta_hlid_map[BITS_TO_LONGS(
- WL12XX_MAX_LINKS)];
+ WLCORE_MAX_LINKS)];
/* recoreded keys - set here before AP startup */
struct wl1271_ap_key *recorded_keys[MAX_NUM_KEYS];
@@ -374,7 +379,7 @@ struct wl12xx_vif {
/* counters of packets per AC, across all links in the vif */
int tx_queue_count[NUM_TX_QUEUES];
- unsigned long links_map[BITS_TO_LONGS(WL12XX_MAX_LINKS)];
+ unsigned long links_map[BITS_TO_LONGS(WLCORE_MAX_LINKS)];
u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
u8 ssid_len;

View File

@ -0,0 +1,110 @@
Each hw supports a different max stations (connected to the
same ap). add a new wl->max_ap_stations and use it instead
of the current common AP_MAX_STATIONS.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 2 ++
drivers/net/wireless/ti/wl12xx/wl12xx.h | 1 +
drivers/net/wireless/ti/wl18xx/main.c | 2 ++
drivers/net/wireless/ti/wl18xx/wl18xx.h | 1 +
drivers/net/wireless/ti/wlcore/main.c | 4 +---
drivers/net/wireless/ti/wlcore/wlcore.h | 2 ++
drivers/net/wireless/ti/wlcore/wlcore_i.h | 2 --
7 files changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1750,11 +1750,13 @@ static int wl12xx_setup(struct wl1271 *w
struct wl12xx_platform_data *pdata = pdev_data->pdata;
BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS);
+ BUILD_BUG_ON(WL12XX_MAX_AP_STATIONS > WL12XX_MAX_LINKS);
wl->rtable = wl12xx_rtable;
wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;
wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
wl->num_links = WL12XX_MAX_LINKS;
+ wl->max_ap_stations = WL12XX_MAX_AP_STATIONS;
wl->num_channels = 1;
wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -65,6 +65,7 @@
#define WL12XX_RX_BA_MAX_SESSIONS 3
+#define WL12XX_MAX_AP_STATIONS 8
#define WL12XX_MAX_LINKS 12
struct wl127x_rx_mem_pool_addr {
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1753,11 +1753,13 @@ static int wl18xx_setup(struct wl1271 *w
int ret;
BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
+ BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS);
wl->rtable = wl18xx_rtable;
wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;
wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
wl->num_links = WL18XX_MAX_LINKS;
+ wl->max_ap_stations = WL18XX_MAX_AP_STATIONS;
wl->num_channels = 2;
wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -42,6 +42,7 @@
#define WL18XX_RX_BA_MAX_SESSIONS 5
+#define WL18XX_MAX_AP_STATIONS 8
#define WL18XX_MAX_LINKS 12
struct wl18xx_priv {
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4695,7 +4695,7 @@ static int wl1271_allocate_sta(struct wl
int ret;
- if (wl->active_sta_count >= AP_MAX_STATIONS) {
+ if (wl->active_sta_count >= wl->max_ap_stations) {
wl1271_warning("could not allocate HLID - too much stations");
return -EBUSY;
}
@@ -5888,8 +5888,6 @@ struct ieee80211_hw *wlcore_alloc_hw(siz
int i, j, ret;
unsigned int order;
- BUILD_BUG_ON(AP_MAX_STATIONS > WLCORE_MAX_LINKS);
-
hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
if (!hw) {
wl1271_error("could not alloc ieee80211_hw");
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -440,6 +440,8 @@ struct wl1271 {
u32 num_rx_desc;
/* number of links the HW supports */
u8 num_links;
+ /* max stations a single AP can support */
+ u8 max_ap_stations;
/* translate HW Tx rates to standard rate-indices */
const u8 **band_rate_to_idx;
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -123,8 +123,6 @@ struct wl1271_chip {
#define NUM_TX_QUEUES 4
-#define AP_MAX_STATIONS 8
-
struct wl_fw_status {
u32 intr;
u8 fw_rx_counter;

View File

@ -0,0 +1,176 @@
Each hw supports a different iface combinations.
Define the supported combinations in each driver,
and save it in wl->iface_combinations.
Since each driver defines its own combinations now,
it can also define its max supported channels, so
we no longer need to save and set it explicitly
in wlcore.
Update wl18xx interface combinations to allow
multiple APs.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 26 +++++++++++++++++++++-
drivers/net/wireless/ti/wl18xx/main.c | 39 ++++++++++++++++++++++++++++++++-
drivers/net/wireless/ti/wlcore/main.c | 28 ++---------------------
drivers/net/wireless/ti/wlcore/wlcore.h | 5 +++--
4 files changed, 68 insertions(+), 30 deletions(-)
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1743,6 +1743,29 @@ static struct ieee80211_sta_ht_cap wl12x
},
};
+static const struct ieee80211_iface_limit wl12xx_iface_limits[] = {
+ {
+ .max = 3,
+ .types = BIT(NL80211_IFTYPE_STATION),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT),
+ },
+};
+
+static const struct ieee80211_iface_combination
+wl12xx_iface_combinations[] = {
+ {
+ .max_interfaces = 3,
+ .limits = wl12xx_iface_limits,
+ .n_limits = ARRAY_SIZE(wl12xx_iface_limits),
+ .num_different_channels = 1,
+ },
+};
+
static int wl12xx_setup(struct wl1271 *wl)
{
struct wl12xx_priv *priv = wl->priv;
@@ -1757,7 +1780,8 @@ static int wl12xx_setup(struct wl1271 *w
wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS;
wl->num_links = WL12XX_MAX_LINKS;
wl->max_ap_stations = WL12XX_MAX_AP_STATIONS;
- wl->num_channels = 1;
+ wl->iface_combinations = wl12xx_iface_combinations;
+ wl->n_iface_combinations = ARRAY_SIZE(wl12xx_iface_combinations);
wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl12xx_band_rate_to_idx;
wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX;
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1747,6 +1747,42 @@ static struct ieee80211_sta_ht_cap wl18x
},
};
+static const struct ieee80211_iface_limit wl18xx_iface_limits[] = {
+ {
+ .max = 3,
+ .types = BIT(NL80211_IFTYPE_STATION),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT),
+ },
+};
+
+static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = {
+ {
+ .max = 2,
+ .types = BIT(NL80211_IFTYPE_AP),
+ },
+};
+
+static const struct ieee80211_iface_combination
+wl18xx_iface_combinations[] = {
+ {
+ .max_interfaces = 3,
+ .limits = wl18xx_iface_limits,
+ .n_limits = ARRAY_SIZE(wl18xx_iface_limits),
+ .num_different_channels = 2,
+ },
+ {
+ .max_interfaces = 2,
+ .limits = wl18xx_iface_ap_limits,
+ .n_limits = ARRAY_SIZE(wl18xx_iface_ap_limits),
+ .num_different_channels = 1,
+ }
+};
+
static int wl18xx_setup(struct wl1271 *wl)
{
struct wl18xx_priv *priv = wl->priv;
@@ -1760,7 +1796,8 @@ static int wl18xx_setup(struct wl1271 *w
wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS;
wl->num_links = WL18XX_MAX_LINKS;
wl->max_ap_stations = WL18XX_MAX_AP_STATIONS;
- wl->num_channels = 2;
+ wl->iface_combinations = wl18xx_iface_combinations;
+ wl->n_iface_combinations = ARRAY_SIZE(wl18xx_iface_combinations);
wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES;
wl->band_rate_to_idx = wl18xx_band_rate_to_idx;
wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX;
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5723,28 +5723,6 @@ static void wl1271_unregister_hw(struct
}
-static const struct ieee80211_iface_limit wlcore_iface_limits[] = {
- {
- .max = 3,
- .types = BIT(NL80211_IFTYPE_STATION),
- },
- {
- .max = 1,
- .types = BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_P2P_GO) |
- BIT(NL80211_IFTYPE_P2P_CLIENT),
- },
-};
-
-static struct ieee80211_iface_combination
-wlcore_iface_combinations[] = {
- {
- .max_interfaces = 3,
- .limits = wlcore_iface_limits,
- .n_limits = ARRAY_SIZE(wlcore_iface_limits),
- },
-};
-
static int wl1271_init_ieee80211(struct wl1271 *wl)
{
int i;
@@ -5865,10 +5843,8 @@ static int wl1271_init_ieee80211(struct
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
/* allowed interface combinations */
- wlcore_iface_combinations[0].num_different_channels = wl->num_channels;
- wl->hw->wiphy->iface_combinations = wlcore_iface_combinations;
- wl->hw->wiphy->n_iface_combinations =
- ARRAY_SIZE(wlcore_iface_combinations);
+ wl->hw->wiphy->iface_combinations = wl->iface_combinations;
+ wl->hw->wiphy->n_iface_combinations = wl->n_iface_combinations;
SET_IEEE80211_DEV(wl->hw, wl->dev);
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -485,8 +485,9 @@ struct wl1271 {
struct completion nvs_loading_complete;
- /* number of concurrent channels the HW supports */
- u32 num_channels;
+ /* interface combinations supported by the hw */
+ const struct ieee80211_iface_combination *iface_combinations;
+ u8 n_iface_combinations;
};
int wlcore_probe(struct wl1271 *wl, struct platform_device *pdev);

View File

@ -0,0 +1,200 @@
Bump the min wl18xx fw version to 8.8.0.0.13
This fw is not backward compatible with older
firmware (due to api changes), so use bump
the firmware name as well.
Some modifications were done to the driver-fw api
in order to support multiple APs.
Additionally, some of the consts (such as max stations,
max links and max RX BA sessions) were changed.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl18xx/main.c | 2 +-
drivers/net/wireless/ti/wl18xx/wl18xx.h | 10 +++++-----
drivers/net/wireless/ti/wlcore/acx.c | 4 +++-
drivers/net/wireless/ti/wlcore/acx.h | 6 ++++--
drivers/net/wireless/ti/wlcore/cmd.c | 5 ++++-
drivers/net/wireless/ti/wlcore/cmd.h | 7 +++++--
drivers/net/wireless/ti/wlcore/main.c | 2 +-
drivers/net/wireless/ti/wlcore/tx.c | 2 +-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 2 +-
9 files changed, 25 insertions(+), 15 deletions(-)
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -648,7 +648,7 @@ static const struct wl18xx_clk_cfg wl18x
};
/* TODO: maybe move to a new header file? */
-#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-2.bin"
+#define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-3.bin"
static int wl18xx_identify_chip(struct wl1271 *wl)
{
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -26,10 +26,10 @@
/* minimum FW required for driver */
#define WL18XX_CHIP_VER 8
-#define WL18XX_IFTYPE_VER 5
+#define WL18XX_IFTYPE_VER 8
#define WL18XX_MAJOR_VER WLCORE_FW_VER_IGNORE
#define WL18XX_SUBTYPE_VER WLCORE_FW_VER_IGNORE
-#define WL18XX_MINOR_VER 39
+#define WL18XX_MINOR_VER 13
#define WL18XX_CMD_MAX_SIZE 740
@@ -40,10 +40,10 @@
#define WL18XX_NUM_MAC_ADDRESSES 3
-#define WL18XX_RX_BA_MAX_SESSIONS 5
+#define WL18XX_RX_BA_MAX_SESSIONS 13
-#define WL18XX_MAX_AP_STATIONS 8
-#define WL18XX_MAX_LINKS 12
+#define WL18XX_MAX_AP_STATIONS 10
+#define WL18XX_MAX_LINKS 16
struct wl18xx_priv {
/* buffer for sending commands to FW */
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -1591,7 +1591,8 @@ out:
return ret;
}
-int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr)
+int wl1271_acx_set_inconnection_sta(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif, u8 *addr)
{
struct wl1271_acx_inconnection_sta *acx = NULL;
int ret;
@@ -1603,6 +1604,7 @@ int wl1271_acx_set_inconnection_sta(stru
return -ENOMEM;
memcpy(acx->addr, addr, ETH_ALEN);
+ acx->role_id = wlvif->role_id;
ret = wl1271_cmd_configure(wl, ACX_UPDATE_INCONNECTION_STA_LIST,
acx, sizeof(*acx));
--- a/drivers/net/wireless/ti/wlcore/acx.h
+++ b/drivers/net/wireless/ti/wlcore/acx.h
@@ -824,7 +824,8 @@ struct wl1271_acx_inconnection_sta {
struct acx_header header;
u8 addr[ETH_ALEN];
- u8 padding1[2];
+ u8 role_id;
+ u8 padding;
} __packed;
/*
@@ -1118,7 +1119,8 @@ int wl1271_acx_ps_rx_streaming(struct wl
bool enable);
int wl1271_acx_ap_max_tx_retry(struct wl1271 *wl, struct wl12xx_vif *wlvif);
int wl12xx_acx_config_ps(struct wl1271 *wl, struct wl12xx_vif *wlvif);
-int wl1271_acx_set_inconnection_sta(struct wl1271 *wl, u8 *addr);
+int wl1271_acx_set_inconnection_sta(struct wl1271 *wl,
+ struct wl12xx_vif *wlvif, u8 *addr);
int wl1271_acx_fm_coex(struct wl1271 *wl);
int wl12xx_acx_set_rate_mgmt_params(struct wl1271 *wl);
int wl12xx_acx_config_hangover(struct wl1271 *wl);
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -1532,6 +1532,7 @@ int wl12xx_cmd_add_peer(struct wl1271 *w
cmd->sp_len = sta->max_sp;
cmd->wmm = sta->wme ? 1 : 0;
cmd->session_id = wl->session_ids[hlid];
+ cmd->role_id = wlvif->role_id;
for (i = 0; i < NUM_ACCESS_CATEGORIES_COPY; i++)
if (sta->wme && (sta->uapsd_queues & BIT(i)))
@@ -1568,7 +1569,8 @@ out:
return ret;
}
-int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid)
+int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ u8 hlid)
{
struct wl12xx_cmd_remove_peer *cmd;
int ret;
@@ -1586,6 +1588,7 @@ int wl12xx_cmd_remove_peer(struct wl1271
/* We never send a deauth, mac80211 is in charge of this */
cmd->reason_opcode = 0;
cmd->send_deauth_flag = 0;
+ cmd->role_id = wlvif->role_id;
ret = wl1271_cmd_send(wl, CMD_REMOVE_PEER, cmd, sizeof(*cmd), 0);
if (ret < 0) {
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -88,7 +88,8 @@ int wl12xx_roc(struct wl1271 *wl, struct
int wl12xx_croc(struct wl1271 *wl, u8 role_id);
int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
struct ieee80211_sta *sta, u8 hlid);
-int wl12xx_cmd_remove_peer(struct wl1271 *wl, u8 hlid);
+int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+ u8 hlid);
void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel,
enum ieee80211_band band);
int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl);
@@ -594,6 +595,8 @@ struct wl12xx_cmd_add_peer {
u8 sp_len;
u8 wmm;
u8 session_id;
+ u8 role_id;
+ u8 padding[3];
} __packed;
struct wl12xx_cmd_remove_peer {
@@ -602,7 +605,7 @@ struct wl12xx_cmd_remove_peer {
u8 hlid;
u8 reason_opcode;
u8 send_deauth_flag;
- u8 padding1;
+ u8 role_id;
} __packed;
/*
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -4798,7 +4798,7 @@ static int wl12xx_sta_remove(struct wl12
if (WARN_ON(!test_bit(id, wlvif->ap.sta_hlid_map)))
return -EINVAL;
- ret = wl12xx_cmd_remove_peer(wl, wl_sta->hlid);
+ ret = wl12xx_cmd_remove_peer(wl, wlvif, wl_sta->hlid);
if (ret < 0)
return ret;
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -101,7 +101,7 @@ static void wl1271_tx_ap_update_inconnec
* authentication response. this way it won't get de-authed by FW
* when transmitting too soon.
*/
- wl1271_acx_set_inconnection_sta(wl, hdr->addr1);
+ wl1271_acx_set_inconnection_sta(wl, wlvif, hdr->addr1);
/*
* ROC for 1 second on the AP channel for completing the connection.
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -65,7 +65,7 @@
* max number of links allowed by all HWs.
* this is NOT the actual max links supported by the current hw.
*/
-#define WLCORE_MAX_LINKS 12
+#define WLCORE_MAX_LINKS 16
/* the driver supports the 2.4Ghz and 5Ghz bands */
#define WLCORE_NUM_BANDS 2

View File

@ -0,0 +1,37 @@
Send EAPOL frames with voice priority by setting (the new)
TX_HW_ATTR_EAPOL_FRAME bit in tx attribute.
Sending EAPOL with voice priority fixes re-key
timeout issues during heavy traffic.
Signed-off-by: Igal Chernobelsky <igalc@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/tx.c | 4 ++++
drivers/net/wireless/ti/wlcore/tx.h | 1 +
2 files changed, 5 insertions(+)
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -362,6 +362,10 @@ static void wl1271_tx_fill_hdr(struct wl
ieee80211_has_protected(frame_control))
tx_attr |= TX_HW_ATTR_HOST_ENCRYPT;
+ /* send EAPOL frames as voice */
+ if (control->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)
+ tx_attr |= TX_HW_ATTR_EAPOL_FRAME;
+
desc->tx_attr = cpu_to_le16(tx_attr);
wlcore_hw_set_tx_desc_csum(wl, desc, skb);
--- a/drivers/net/wireless/ti/wlcore/tx.h
+++ b/drivers/net/wireless/ti/wlcore/tx.h
@@ -37,6 +37,7 @@
#define TX_HW_ATTR_TX_CMPLT_REQ BIT(12)
#define TX_HW_ATTR_TX_DUMMY_REQ BIT(13)
#define TX_HW_ATTR_HOST_ENCRYPT BIT(14)
+#define TX_HW_ATTR_EAPOL_FRAME BIT(15)
#define TX_HW_ATTR_OFST_SAVE_RETRIES 0
#define TX_HW_ATTR_OFST_HEADER_PAD 1

View File

@ -0,0 +1,25 @@
Stopping sched scan on interface removal (during recovery)
is no longer needed, as sched scanning is automatically
restarted by mac80211.
Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2582,10 +2582,8 @@ static void __wl1271_op_remove_interface
ieee80211_scan_completed(wl->hw, true);
}
- if (wl->sched_vif == wlvif) {
- ieee80211_sched_scan_stopped(wl->hw);
+ if (wl->sched_vif == wlvif)
wl->sched_vif = NULL;
- }
if (wl->roc_vif == vif) {
wl->roc_vif = NULL;

View File

@ -0,0 +1,47 @@
12xx chips allow only OFDM rates in AP mode for BT-Coex purposes. This
is no longer required in 18xx chips, starting with FW 8.6.0.0.8.
Update the min allowed FW version in 18xx to support this functionality.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl12xx/main.c | 1 +
drivers/net/wireless/ti/wlcore/init.c | 2 +-
drivers/net/wireless/ti/wlcore/wlcore.h | 3 +++
3 files changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1789,6 +1789,7 @@ static int wl12xx_setup(struct wl1271 *w
wl->fw_status_len = sizeof(struct wl12xx_fw_status);
wl->fw_status_priv_len = 0;
wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics);
+ wl->ofdm_only_ap = true;
wlcore_set_ht_cap(wl, IEEE80211_BAND_2GHZ, &wl12xx_ht_cap);
wlcore_set_ht_cap(wl, IEEE80211_BAND_5GHZ, &wl12xx_ht_cap);
wl12xx_conf_init(wl);
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -462,7 +462,7 @@ int wl1271_init_ap_rates(struct wl1271 *
* If the basic rates contain OFDM rates, use OFDM only
* rates for unicast TX as well. Else use all supported rates.
*/
- if ((wlvif->basic_rate_set & CONF_TX_OFDM_RATES))
+ if (wl->ofdm_only_ap && (wlvif->basic_rate_set & CONF_TX_OFDM_RATES))
supported_rates = CONF_TX_OFDM_RATES;
else
supported_rates = CONF_TX_ENABLED_RATES;
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -409,6 +409,9 @@ struct wl1271 {
/* AP-mode - number of currently connected stations */
int active_sta_count;
+ /* Flag determining whether AP should broadcast OFDM-only rates */
+ bool ofdm_only_ap;
+
/* last wlvif we transmitted from */
struct wl12xx_vif *last_wlvif;

View File

@ -0,0 +1,28 @@
mac80211 unsets the default wep key on disassoc.
The fw doesn't support this notification, so simply
ignore it.
The actual flow actually triggers fw recovery in some
cases, as mac80211 unsets the default key only after
disassoc, when wlvif->sta.hlid, resulting in invalid
hlid being passed to the fw.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3505,6 +3505,10 @@ static void wl1271_op_set_default_key_id
wl1271_debug(DEBUG_MAC80211, "mac80211 set default key idx %d",
key_idx);
+ /* we don't handle unsetting of default key */
+ if (key_idx == -1)
+ return;
+
mutex_lock(&wl->mutex);
if (unlikely(wl->state != WLCORE_STATE_ON)) {

View File

@ -0,0 +1,51 @@
Each AP has its own global and broadcast links, so when
checking for active sta count (according to the active_link_count)
we must take them all into account.
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 10 +++++-----
drivers/net/wireless/ti/wlcore/tx.c | 10 +++++-----
2 files changed, 10 insertions(+), 10 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -345,12 +345,12 @@ static void wl12xx_irq_ps_regulate_link(
* Start high-level PS if the STA is asleep with enough blocks in FW.
* Make an exception if this is the only connected link. In this
* case FW-memory congestion is less of a problem.
- * Note that a single connected STA means 3 active links, since we must
- * account for the global and broadcast AP links. The "fw_ps" check
- * assures us the third link is a STA connected to the AP. Otherwise
- * the FW would not set the PSM bit.
+ * Note that a single connected STA means 2*ap_count + 1 active links,
+ * since we must account for the global and broadcast AP links
+ * for each AP. The "fw_ps" check assures us the other link is a STA
+ * connected to the AP. Otherwise the FW would not set the PSM bit.
*/
- else if (wl->active_link_count > 3 && fw_ps &&
+ else if (wl->active_link_count > (wl->ap_count*2 + 1) && fw_ps &&
tx_pkts >= WL1271_PS_STA_MAX_PACKETS)
wl12xx_ps_link_start(wl, wlvif, hlid, true);
}
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -134,12 +134,12 @@ static void wl1271_tx_regulate_link(stru
* into high-level PS and clean out its TX queues.
* Make an exception if this is the only connected link. In this
* case FW-memory congestion is less of a problem.
- * Note that a single connected STA means 3 active links, since we must
- * account for the global and broadcast AP links. The "fw_ps" check
- * assures us the third link is a STA connected to the AP. Otherwise
- * the FW would not set the PSM bit.
+ * Note that a single connected STA means 2*ap_count + 1 active links,
+ * since we must account for the global and broadcast AP links
+ * for each AP. The "fw_ps" check assures us the other link is a STA
+ * connected to the AP. Otherwise the FW would not set the PSM bit.
*/
- if (wl->active_link_count > 3 && fw_ps &&
+ if (wl->active_link_count > (wl->ap_count*2 + 1) && fw_ps &&
tx_pkts >= WL1271_PS_STA_MAX_PACKETS)
wl12xx_ps_link_start(wl, wlvif, hlid, true);
}

View File

@ -0,0 +1,42 @@
Silently ignore repetitive scheduling of recovery work and commands
being passed to the bus when the HW is not available. This can happen
many times during recovery and slow it down. It also spams the kernel
logs.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/cmd.c | 4 ++--
drivers/net/wireless/ti/wlcore/main.c | 5 +++--
2 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -60,8 +60,8 @@ static int __wlcore_cmd_send(struct wl12
u16 status;
u16 poll_count = 0;
- if (WARN_ON(wl->state == WLCORE_STATE_RESTARTING &&
- id != CMD_STOP_FWLOGGER))
+ if (unlikely(wl->state == WLCORE_STATE_RESTARTING &&
+ id != CMD_STOP_FWLOGGER))
return -EIO;
cmd = buf;
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -782,10 +782,11 @@ out:
void wl12xx_queue_recovery_work(struct wl1271 *wl)
{
- WARN_ON(!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
-
/* Avoid a recursive recovery */
if (wl->state == WLCORE_STATE_ON) {
+ WARN_ON(!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY,
+ &wl->flags));
+
wl->state = WLCORE_STATE_RESTARTING;
set_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags);
wl1271_ps_elp_wakeup(wl);

View File

@ -0,0 +1,21 @@
dfs configuration command might take longer than
the current timeout. increase it to 5 seconds.
Signed-off-by: Yaniv Machani <yanivma@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/cmd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -207,7 +207,7 @@ enum cmd_templ {
#define WL1271_COMMAND_TIMEOUT 2000
#define WL1271_CMD_TEMPL_DFLT_SIZE 252
#define WL1271_CMD_TEMPL_MAX_SIZE 512
-#define WL1271_EVENT_TIMEOUT 1500
+#define WL1271_EVENT_TIMEOUT 5000
struct wl1271_cmd_header {
__le16 id;

View File

@ -0,0 +1,71 @@
Enabling beacon filtering before receving a beacon
might result in not having a beacon at all for the
current connected AP, which prevents the station
from entering power-save.
Replace the current approach (of starting beacon
filtering on init) and configure beacon filering
only after bss_conf->dtimper is set (which means
mac80211 already parsed a beacon).
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/acx.c | 3 ++-
drivers/net/wireless/ti/wlcore/init.c | 4 ++--
drivers/net/wireless/ti/wlcore/main.c | 12 ++++++++++++
3 files changed, 16 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/acx.c
+++ b/drivers/net/wireless/ti/wlcore/acx.c
@@ -358,7 +358,8 @@ int wl1271_acx_beacon_filter_opt(struct
struct acx_beacon_filter_option *beacon_filter = NULL;
int ret = 0;
- wl1271_debug(DEBUG_ACX, "acx beacon filter opt");
+ wl1271_debug(DEBUG_ACX, "acx beacon filter opt enable=%d",
+ enable_filter);
if (enable_filter &&
wl->conf.conn.bcn_filt_mode == CONF_BCN_FILT_MODE_DISABLED)
--- a/drivers/net/wireless/ti/wlcore/init.c
+++ b/drivers/net/wireless/ti/wlcore/init.c
@@ -287,8 +287,8 @@ static int wl1271_init_sta_beacon_filter
if (ret < 0)
return ret;
- /* enable beacon filtering */
- ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true);
+ /* disable beacon filtering until we get the first beacon */
+ ret = wl1271_acx_beacon_filter_opt(wl, wlvif, false);
if (ret < 0)
return ret;
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2941,6 +2941,11 @@ static int wlcore_unset_assoc(struct wl1
ret = wl1271_acx_keep_alive_mode(wl, wlvif, false);
if (ret < 0)
return ret;
+
+ /* disable beacon filtering */
+ ret = wl1271_acx_beacon_filter_opt(wl, wlvif, false);
+ if (ret < 0)
+ return ret;
}
if (test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS, &wlvif->flags)) {
@@ -4345,6 +4350,13 @@ static void wl1271_bss_info_changed_sta(
}
}
+ if ((changed & BSS_CHANGED_BEACON_INFO) && bss_conf->dtim_period) {
+ /* enable beacon filtering */
+ ret = wl1271_acx_beacon_filter_opt(wl, wlvif, true);
+ if (ret < 0)
+ goto out;
+ }
+
ret = wl1271_bss_erp_info_changed(wl, vif, bss_conf, changed);
if (ret < 0)
goto out;

View File

@ -0,0 +1,22 @@
TI wl12xx/wl18xx cards support channel switch via a driver specific
switch_channel op while operating with channel contexts.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5770,7 +5770,8 @@ static int wl1271_init_ieee80211(struct
IEEE80211_HW_AP_LINK_PS |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW |
- IEEE80211_HW_QUEUE_CONTROL;
+ IEEE80211_HW_QUEUE_CONTROL |
+ IEEE80211_HW_CHANCTX_STA_CSA;
wl->hw->wiphy->cipher_suites = cipher_suites;
wl->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);

View File

@ -0,0 +1,52 @@
From fde3f0a7f3112527a18e06e32efdd9a354c91b02 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 18 Mar 2014 13:19:48 +0200
Subject: [PATCH] wl18xx: align event mailbox with current fw
Some fields are missing from the event mailbox
struct definitions, which cause issues when
trying to handle some events.
Add the missing fields in order to align the
struct size (without adding actual support
for the new fields).
Signed-off-by: Eliad Peller <eliad@wizery.com>
---
drivers/net/wireless/ti/wl18xx/event.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h
index 398f3d2..a76e98e 100644
--- a/drivers/net/wireless/ti/wl18xx/event.h
+++ b/drivers/net/wireless/ti/wl18xx/event.h
@@ -68,6 +68,26 @@ struct wl18xx_event_mailbox {
/* bitmap of inactive stations (by HLID) */
__le32 inactive_sta_bitmap;
+
+ /* rx BA win size indicated by RX_BA_WIN_SIZE_CHANGE_EVENT_ID */
+ u8 rx_ba_role_id;
+ u8 rx_ba_link_id;
+ u8 rx_ba_win_size;
+ u8 padding;
+
+ /* smart config */
+ u8 sc_ssid_len;
+ u8 sc_pwd_len;
+ u8 sc_token_len;
+ u8 padding1;
+ u8 sc_ssid[32];
+ u8 sc_pwd[32];
+ u8 sc_token[32];
+
+ /* smart config sync channel */
+ u8 sc_sync_channel;
+ u8 sc_sync_band;
+ u8 padding2[2];
} __packed;
int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event,
--
1.8.5.2.229.g4448466.dirty

View File

@ -0,0 +1,41 @@
From 4101e8dc540d19f1f6c24930629149191786e4cd Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Mon, 9 Sep 2013 16:48:59 +0300
Subject: [PATCH 27/75] wlcore: don't switch channels on disconnected STA vifs
Sending the FW a channel switch command on a disconnected vif may result
in a beacon loss event. Avoid this edge case.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
drivers/net/wireless/ti/wlcore/main.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 117e01e..a0c5a1e 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5224,6 +5224,10 @@ static void wl12xx_op_channel_switch(struct ieee80211_hw *hw,
if (unlikely(wl->state == WLCORE_STATE_OFF)) {
wl12xx_for_each_wlvif_sta(wl, wlvif) {
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
+
+ if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
+ continue;
+
ieee80211_chswitch_done(vif, false);
}
goto out;
@@ -5239,6 +5243,9 @@ static void wl12xx_op_channel_switch(struct ieee80211_hw *hw,
wl12xx_for_each_wlvif_sta(wl, wlvif) {
unsigned long delay_usec;
+ if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags))
+ continue;
+
ret = wl->ops->channel_switch(wl, wlvif, ch_switch);
if (ret)
goto out_sleep;
--
1.8.3.2