22ce389e6a
ar71xx: add TP-LINK WA-801ND to run-time model detection
...
A small cosmetic fix to show the HW model name correctly in LuCI.
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35365
2013-01-29 09:40:29 +00:00
1b3c6ad1fb
generic: fix build failure in MIPS kexec code if SMP is enabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35364
2013-01-29 09:40:23 +00:00
6ea9abadeb
netifd: update to latest version, fixes setting addresses/routes on alias interfaces
...
SVN-Revision: 35362
2013-01-28 20:35:55 +00:00
2d298b7b5e
Add support for GigaDevice GD25Q32/GD25Q64 SPI Flash in m25p80.c
...
Add support for GigaDevice GD25Q32 32 Mbit (4 MB) SPI Flash (see datasheet: http://www.gigadevice.com/UserFiles/GD25Q32_Rev0.2(1).pdf ) used in Hame MPR-A1 and clones and for GigaDevice GD25Q64 64 Mbit (8 MB) SPI Flash used in Hame MPR-A2 devices (datasheet: http://www.gigadevice.com/UserFiles/GD25Q64.pdf ).
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Patchwork: http://patchwork.openwrt.org/patch/3120/
SVN-Revision: 35361
2013-01-28 19:10:21 +00:00
0fb081bb5a
package ncm & qmi wwan
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3134/
SVN-Revision: 35360
2013-01-28 18:20:10 +00:00
756a7c5451
fix for non-blinking LAN LEDs
...
https://dev.openwrt.org/ticket/12830
SVN-Revision: 35359
2013-01-28 18:06:31 +00:00
e804a663e3
hostapd: don't configure wpa_supplicant with empty password="" if no password is specified ( #12912 )
...
SVN-Revision: 35358
2013-01-28 18:05:33 +00:00
a0f7a3c214
dont load gptu on ase
...
fixes #12792
SVN-Revision: 35357
2013-01-28 17:46:07 +00:00
d93706154b
ramips: reset switch on single-port devices
...
Signed-off-by: Daniel Gole <dgolle@allnet.de>
SVN-Revision: 35356
2013-01-28 17:44:41 +00:00
0de0955931
refresh patches
...
SVN-Revision: 35355
2013-01-28 17:44:20 +00:00
0183df8ed9
Fix ARV7518 USB
...
This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/ ).
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35354
2013-01-28 17:43:35 +00:00
3534757bb9
Add ath9k eeprom and pci fixup support
...
Add ath9k eeprom and pci fixup support (again) for linux 3.7.
On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35353
2013-01-28 17:43:25 +00:00
5eb43d4cf8
Add support for ARV4518PW R01 and rename R01A.
...
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.
This fixes: https://dev.openwrt.org/ticket/12884
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
509f39a10a
scripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries
...
SVN-Revision: 35349
2013-01-28 15:54:27 +00:00
839f3ab0e7
firewall: flush conntrack table after changing interface rules
...
SVN-Revision: 35348
2013-01-28 15:53:44 +00:00
ec41a6a08c
netifd: IPv6 sysctl, restart IPv6 in static mode to send RS
...
SVN-Revision: 35347
2013-01-28 14:07:27 +00:00
75b06607db
netifd: add SLAAC ipv6 value for static-proto
...
SVN-Revision: 35346
2013-01-28 13:53:48 +00:00
e964fa5d8f
odhcp6c: work-around for proto-script to avoid loosing the default route
...
SVN-Revision: 35345
2013-01-28 13:53:43 +00:00
5f735b291f
base-files: remove IPv6-forwarding setting for all interfaces
...
SVN-Revision: 35344
2013-01-28 13:53:38 +00:00
1dc9c8ef69
kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed
...
SVN-Revision: 35342
2013-01-27 23:23:39 +00:00
68aeb7af8e
brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe.
...
SVN-Revision: 35341
2013-01-27 21:48:28 +00:00
a9175c90cf
kernel: b53: the b53 spi driver depends on spi
...
SVN-Revision: 35340
2013-01-27 21:39:53 +00:00
0492391922
kernel: make usb2-pci depend on usb2 and not the other way around
...
SVN-Revision: 35339
2013-01-27 21:28:26 +00:00
6f59cd3fb8
kernel: activate input-matrixkmap for kernel 3.8
...
SVN-Revision: 35338
2013-01-27 21:23:33 +00:00
0d42d05242
kernel: add ehci-platform.ko and ehci-pci.ko when build with kernel 3.8
...
SVN-Revision: 35337
2013-01-27 21:19:48 +00:00
62554217fc
kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8
...
SVN-Revision: 35336
2013-01-27 21:18:52 +00:00
6c7c1ed5f5
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
...
These attributes where removed with kernel 3.8 and are now causing compile errors.
SVN-Revision: 35335
2013-01-27 21:17:38 +00:00
2d66598f41
acx-mac80211: make it compile with kernel 3.8
...
SVN-Revision: 35334
2013-01-27 21:16:35 +00:00
2c0e5f83db
acx-mac80211: refresh patches
...
SVN-Revision: 35333
2013-01-27 21:15:48 +00:00
4947dab66a
acx-mac80211: use same config options as mac80211 package
...
Problem was missing CONFIG_MAC80211_DEBUGFS
in the acx-mac80211 build, which broke subsequently the ABI in struct
ieee80211_ops. Defect manifested in failing ieee80211_alloc_hw() and maybe
also in other strange behaviour before.
I added CONFIG_CFG80211_DEBUGFS, CONFIG_MAC80211_DEBUGFS and the same also
for CONFIG_MAC80211_MESH, just to be inline on how it's done currently in
package/mac80211/Makefile.
Thank you Oliver Winker
SVN-Revision: 35332
2013-01-27 21:15:13 +00:00
8193bbe59a
netfilter: add support for flushing conntrack via /proc
...
SVN-Revision: 35330
2013-01-27 19:02:38 +00:00
156a6e7999
kernel: clean up crypto kconfig options on 3.8
...
SVN-Revision: 35329
2013-01-27 17:49:09 +00:00
721bf97863
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
...
These attributes where removed with kernel 3.8 and are now causing compile errors.
SVN-Revision: 35328
2013-01-27 17:48:48 +00:00
ed7ca5d44e
kernel: clean up crypto related kconfig options
...
SVN-Revision: 35327
2013-01-27 17:23:12 +00:00
8a1091ad53
ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma
...
SVN-Revision: 35326
2013-01-27 16:38:27 +00:00
044c316167
kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
...
Reduces kernel size after LZMA by about 5k on MIPS
SVN-Revision: 35325
2013-01-27 16:21:08 +00:00
e083c7926b
brcm47xx: create image for Netgear WNDR3400 V1
...
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
05623aebef
brcm47xx: add initial board detection code
...
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
a83d7bb109
brcm47xx: add gpio to irq function again
...
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
8933b918cd
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
...
in combination with kernel symbol export stripping this significantly reduces
the kernel image size
SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
7809d73fd2
kernel: fix module export stripping
...
SVN-Revision: 35319
2013-01-26 16:26:04 +00:00
15be1c9ee7
kernel: update linux 3.7 to 3.7.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
680f460861
kernel: refresh 3.8 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35317
2013-01-24 17:04:52 +00:00
9781461a3d
mvebu: update to 3.8-rc4
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35316
2013-01-24 17:04:46 +00:00
4a69e20a10
kernel: add missing config options for 3.8
...
SVN-Revision: 35315
2013-01-24 14:48:15 +00:00
76c12ff797
brcm47xx: change generic profiles
...
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.
SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
b60fc82ce5
kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
...
SVN-Revision: 35310
2013-01-23 16:31:38 +00:00
8ce8960959
ar71xx: sync kernel sizes where possible to fix images for some devices ( #12874 )
...
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
8411e5c06e
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
17d51121a6
bcm63xx: expose the internal switch to b53
...
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Gabor Juhos
Felix Fietkau
John Crispin
Jo-Philipp Wich
Steven Barth
Hauke Mehrtens
Florian Fainelli
Jonas Gorski