Commit Graph

297 Commits (0ebc681fe28fe49bf324dd0a810ad700a897991f)

Author SHA1 Message Date
Imre Kaloz 87a70e0774 This had been set in r44508 as a workaround for switch problems.
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46700
2015-08-21 08:10:48 +00:00
Imre Kaloz f57484c4af mvebu: fix cobra chainmask
Thanks Sebastian for spotting it.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46697
2015-08-21 08:01:48 +00:00
Imre Kaloz 20fac016e4 mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
2015-08-19 08:31:23 +00:00
Jonas Gorski bed330204a image.mk: move KDIR_TMP definition to a central location
Instead of each target defining it the same, move the KDIR_TMP
definition to include/image.mk. In addition Image/Build/SysupgradeNAND
already requires KDIR_TMP to be set, so it makes sense to have it
globally defined.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46592
2015-08-14 10:20:53 +00:00
Jonas Gorski dbe4173b20 image: fix jffs2(_nand) image generation
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.

Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46564
2015-08-05 13:55:52 +00:00
Imre Kaloz eca9068815 mvebu: update dts files for mamba / WRT1900AC
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 46530
2015-07-31 18:23:28 +00:00
Imre Kaloz d78c7f1765 mvebu: fix gpio config on the WRT1200AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46527
2015-07-31 18:08:12 +00:00
Hauke Mehrtens 7c7e5c4276 mvebu: make patches apply against 3.18.18 again
commit r46299 broke the mvebu target because one patch does not apply
any more. This commit closes #20070.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46303
2015-07-12 10:38:54 +00:00
Jonas Gorski 9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
Imre Kaloz 9fb062cf93 mvebu: make flashing more safe
Turn on the auto recovery feature when flashing
and turn it off on successful bootup.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45792
2015-05-27 19:03:22 +00:00
Imre Kaloz f1ebb1dddd mvebu: update Linux 4.0 patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45762
2015-05-26 09:31:39 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Imre Kaloz c4c4cce190 mvebu: supress useless in-cpu rtc init on the Mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45704
2015-05-19 22:54:05 +00:00
Imre Kaloz 9d3f24465f mvebu: add xhci phy support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45629
2015-05-08 12:12:20 +00:00
Luka Perkov 76330e9b57 mvebu: better integrate xp-gp
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
Imre Kaloz 2705cda813 mvebu: add support for the Linksys Caiman and Cobra
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Luka Perkov 0926e4c22f mvebu: bring back CONFIG_CPU_THERMAL
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45455
2015-04-16 00:23:34 +00:00
Luka Perkov a635c0a04e mvebu: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45454
2015-04-16 00:10:42 +00:00
Luka Perkov dade4535bb mvebu: fix typo in marvell profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45453
2015-04-15 16:23:20 +00:00
Luka Perkov a046ce235f mvebu: better integrate 385-ap-db
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
Imre Kaloz 232c61742e mvebu: copy the initramfs files to the bin dir
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45421
2015-04-13 20:06:47 +00:00
Imre Kaloz 8c684f42e5 mvebu: add support for the in-CPU RTC on the Armada 38x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45415
2015-04-13 13:06:34 +00:00
Imre Kaloz c9e6c7c836 mvebu: add comments to image generation
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45414
2015-04-13 12:15:40 +00:00
Imre Kaloz e3bd4f0969 mvebu: stop legacy image generation
If you can't find the firmware for you board, send proper patches.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45413
2015-04-13 12:08:42 +00:00
Imre Kaloz 96c793f529 mvebu: generate a single firmware for the 385-db-ap
This has been done without having a board, but should work.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45412
2015-04-13 12:06:56 +00:00
Imre Kaloz 4da8f96754 mvebu: reflect Armada 38x support in the name
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45411
2015-04-13 11:30:39 +00:00
Imre Kaloz ceb7321e13 mvebu: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45401
2015-04-12 17:30:41 +00:00
Imre Kaloz b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
2015-04-12 17:29:50 +00:00
Imre Kaloz 6f01238398 mvebu: handle other SKUs as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45396
2015-04-12 15:04:14 +00:00
Imre Kaloz d1bedfbdf5 mvebu: include the ahci driver in the default profile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45395
2015-04-12 15:03:25 +00:00
Imre Kaloz a62fa2d365 mvebu: reformat the damaged syscfg partition on the mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45386
2015-04-12 08:35:33 +00:00
John Crispin 6d0ad03fac kernel: remove references to kmod-of-i2c
these break the IB since the module is part of i2c-core now

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45363
2015-04-10 13:39:33 +00:00
Imre Kaloz 7a9fe56452 generic/3.18: upgrade to 3.18.11
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45303
2015-04-07 21:29:26 +00:00
Imre Kaloz be2d60465d mvebu: disable cpu idle on a38x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45302
2015-04-07 21:13:44 +00:00
Imre Kaloz f60fea1923 Upstream commits 43b68879de27b1993518687fbc6013da80cdcbfe and ce6031c89a35cffd5a5992b08377b77f49a004b9 improve the cpuidle driver on Armada XP. The latter commit improves performance at the slight expense of power consumption.
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45294
2015-04-07 18:13:51 +00:00
Imre Kaloz f079ad97ce mvebu: use CONFIG_MANGLE_BOOTARGS
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45200
2015-03-31 19:27:59 +00:00
Imre Kaloz 77f322e0d7 mvebu: add missing a38x dts labels
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45199
2015-03-31 19:23:32 +00:00
Imre Kaloz 35df52f89f generic/3.18: upgrade to 3.18.10
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45197
2015-03-31 19:21:13 +00:00
Imre Kaloz b9c4dadc11 mvebu: deal with the new path in the fan control script for Linux 4.0+
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45195
2015-03-31 19:12:27 +00:00
Imre Kaloz f6eff33b8d mvebu: fixup usb3 support on the a38x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45026
2015-03-26 14:32:45 +00:00
Imre Kaloz 23b880b373 mvebu: add a coherency fix which didn't make it to -stable, yet
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45024
2015-03-26 13:52:21 +00:00
Imre Kaloz af69bf56b6 drop 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45002
2015-03-26 09:42:59 +00:00
Imre Kaloz 5be4f2b5b8 mvebu: update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44949
2015-03-23 12:44:30 +00:00
Imre Kaloz b95a9f01c1 mvebu: set default regdomain
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
2015-03-20 12:15:40 +00:00
Imre Kaloz e3d19988cf mvebu: add Linux 4.0 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44882
2015-03-19 10:25:44 +00:00
Felix Fietkau 298d67ec7b mvebu: drop linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828
2015-03-16 08:29:42 +00:00
Imre Kaloz fd17ad3d9a mvebu: add backported patch to reenable hw i/o coherency
Reported-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44621
2015-03-06 18:57:49 +00:00
John Crispin d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin 6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
John Crispin 7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
Imre Kaloz e02478a22a mvebu: set default WRT1900AC switch config
This sets 'enable_vlan' and thus uses 802.1q
VLANs, but without tagging on either interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44509
2015-02-23 10:35:29 +00:00
Imre Kaloz 0de48a0dd8 mvebu: set WRT1900AC WAN interface MAC address
Toggles the LA bit on the WAN interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44508
2015-02-23 10:33:19 +00:00
Imre Kaloz 29130d39e3 mvebu: refresh 3.18 patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44462
2015-02-16 12:48:05 +00:00
Imre Kaloz 9b1c7a9de4 mvebu: fix WRT1900AC ubinized images
The current pxa3xx_nand driver doesn't support sub-page writing,
so the VID header offset must be specified explicitly.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44455
2015-02-14 22:18:35 +00:00
Luka Perkov 81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov 92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
Imre Kaloz 865647cea2 mvebu: add note about the move to single firmware files
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44291
2015-02-06 11:18:59 +00:00
Imre Kaloz eda08dd423 mvebu: support building images for a single board
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44290
2015-02-06 11:16:20 +00:00
Imre Kaloz 12531a0f86 mvebu: don't generate targz images by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44268
2015-02-05 16:31:52 +00:00
Imre Kaloz 66e35c5246 mvebu: Enable the A385 AP on 3.19
In order for the image to be built, some patches need to be ported to 3.19.

Add the relevant patches. Note that most of them (if not all) should be merged
in 3.20, removing the need to carry them on then.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44267
2015-02-05 15:41:07 +00:00
Imre Kaloz 9be491f084 mvebu: add Armada 385 DB AP support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44266
2015-02-05 11:34:21 +00:00
Imre Kaloz 3019f7ecbd mvebu: add the Armada 385 Reference Design support
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44265
2015-02-05 11:29:56 +00:00
Imre Kaloz 40daf9346e mvebu: fix NAND and NOR options
All the boards but Mamba had wrong UBI options so far, making it impossible to
flash the built image on their respective storage medium.

Fix all of the supported boards in order to make the generated images useful.

Tested on a Mirabox, an Armada XP GP and an Openblocks AX3, and used the NAND
chip datasheet for the others.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44264
2015-02-05 11:26:17 +00:00
Imre Kaloz f14c4e5cff mvebu: add a subprofile for boards based on a small NOR
Some boards only come with a small NOR on it, where UBI isn't a good solution
because of its overhead.

Add a new subprofile for such boards, that rely on the mtd split framework
instead.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44263
2015-02-05 11:25:21 +00:00
Imre Kaloz e46593a54c mvebu: add large NOR sub-profile implementation
While we supported only the NAND so far, some boards use a large enough NOR,
where UBI is the only reasonable option. Create a new sub-profile template with
a different set of UBI options.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44262
2015-02-05 11:24:10 +00:00
Imre Kaloz 80cfe34291 mvebu: Add sub-profiles
In order to support the various board NAND layout that we support, introduce a
sub-profile similar to the one used by ar71xx.

These subprofiles provide a default implementation for most of the building
functions, while allowing each sub-profile to override any of these operations
in order to have a more specific behaviour, like Mamba expects for example.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44261
2015-02-05 11:22:43 +00:00
Imre Kaloz 67b91f47d6 mvebu: Add MTD split framework support
We're going to need the MTD split related options for our NOR support.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44259
2015-02-05 11:14:53 +00:00
Imre Kaloz 7be967e954 mvebu: temporary el cheapo' fan control script
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44153
2015-01-26 20:41:43 +00:00
Jo-Philipp Wich 0798de785e mvebu: add missing config symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44147
2015-01-25 22:17:43 +00:00
Imre Kaloz 9a8a348f14 mvebu: use pwmfan in the profile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44131
2015-01-25 15:52:28 +00:00
Imre Kaloz 18012a4198 mvebu: preliminary 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44130
2015-01-25 15:37:31 +00:00
Imre Kaloz d9c6ff8c25 mvebu: gpio based pwm support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44129
2015-01-25 15:36:47 +00:00
Imre Kaloz 9a172c70eb mvebu: update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44128
2015-01-25 15:26:33 +00:00
Imre Kaloz afa58d8589 mvebu: backport some upstream changes
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44127
2015-01-25 15:25:14 +00:00
Imre Kaloz 8a103d5c56 mvebu: fixups for the new driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
Imre Kaloz 9a8bf84879 mvebu: add the new tlc59116 driver and migrate the Mamba to it
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43975
2015-01-15 13:59:01 +00:00
Imre Kaloz a72bf9f3d2 mvebu: Switch to the generic mkuimage macro
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.

Switch to this implementation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43969
2015-01-14 11:39:20 +00:00
Imre Kaloz 91b79128dc mvebu: Replace the padjffs2 call by the generic definition
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43968
2015-01-14 11:37:29 +00:00
Imre Kaloz b0a2d7ad0d now that the driver knows it, use the 88e6172's switch type in the mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43945
2015-01-12 09:32:33 +00:00
Luka Perkov a1872182bb mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
Imre Kaloz 7f21a92ffa switch to 3.18
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43893
2015-01-09 12:36:07 +00:00
Imre Kaloz 26b57a6dc2 refresh kernel config, add cpuidle and cpufreq support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43855
2015-01-05 15:08:20 +00:00
Imre Kaloz bfa1f18bfb enable swconfig and the mvsw6171 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43854
2015-01-05 15:02:18 +00:00
Imre Kaloz 5ed3a7aeb3 add tmp421 to the device tree instead of relying on autodetect
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43825
2015-01-04 17:26:07 +00:00
Imre Kaloz f12a0f4308 enable wpad-mini by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43801
2014-12-31 21:59:07 +00:00
Imre Kaloz edbb903461 fix mvneta vlan tagging
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"

Upstream commits:

817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea

Fixes vlan tagging on SoC interfaces for the WRT1900AC.  Useful
when using mvsw6171 driver.

Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43781
2014-12-26 14:48:33 +00:00
Imre Kaloz e23b988bf5 only call UbinizeImage and BuildSysUpgrade for boards we support them on
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43779
2014-12-26 13:45:18 +00:00
Imre Kaloz f3755f5758 The ubinized filesystems should be used for generating the final images, so store them in KDIR instead.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43778
2014-12-26 13:33:22 +00:00
Imre Kaloz 5744500ab6 we've changed places with Luka, reflect that :)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43774
2014-12-25 22:34:15 +00:00
Imre Kaloz 2bff4ca7b1 use mwlwifi by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43773
2014-12-25 22:29:29 +00:00
John Crispin 019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Luka Perkov a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
2014-12-10 18:55:53 +00:00
Felix Fietkau 9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
Imre Kaloz f3df3bdb26 add initial 3.18 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43366
2014-11-24 16:00:41 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Luka Perkov dd8d729096 kernel: update 3.14 to 3.14.16
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42070
2014-08-08 13:38:22 +00:00
Luka Perkov f548b18353 kernel: update 3.14 to 3.14.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41898
2014-07-30 15:44:44 +00:00
John Crispin 7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
Imre Kaloz d7ae7bae57 mark the default WRT1900AC image "factory"
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41648
2014-07-14 15:02:38 +00:00
Imre Kaloz 6f5a9debed handle sysupgrade tar files on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41647
2014-07-14 15:00:36 +00:00
Imre Kaloz 1d11ffa4f2 use the full boardname for the wrt1900ac image
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41631
2014-07-13 22:15:03 +00:00
Imre Kaloz 81d85a717a add sysupgrade support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41630
2014-07-13 22:12:56 +00:00
Imre Kaloz 88121f229c update wrt1900ac dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41629
2014-07-13 22:11:43 +00:00
Luka Perkov a145a22f66 kernel: update 3.14 to 3.14.12
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41582
2014-07-11 13:28:44 +00:00
Imre Kaloz 811d1682b8 enable handling of the wan led on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41555
2014-07-10 10:19:06 +00:00
Luka Perkov 90b53991a0 kernel: update 3.14 to 3.14.11
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41551
2014-07-08 22:44:34 +00:00
Luka Perkov 354a1042cc kernel: update 3.14 to 3.14.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41533
2014-07-06 18:10:49 +00:00
Imre Kaloz b7b222279c set led triggers for the Linksys WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41436
2014-07-01 09:45:41 +00:00
Imre Kaloz 6fa01eab80 adjust default profile, and add an evalboard one
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41435
2014-07-01 09:43:38 +00:00
Imre Kaloz 9ff59c7656 drop unneeded file
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41433
2014-07-01 09:35:22 +00:00
Luka Perkov 26b06940a9 mvebu: drop 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41406
2014-06-29 23:29:57 +00:00
Imre Kaloz 1cebada22b fix the WPS button's GPIO number on the mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41392
2014-06-29 21:26:01 +00:00
Imre Kaloz 6e59193e88 upgrade to Linux 3.14.9
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41388
2014-06-29 13:11:57 +00:00
Imre Kaloz 3e4932758e build firmware images for the Mamba (Linksys WRT1900AC)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41387
2014-06-29 13:10:35 +00:00
Imre Kaloz 0bc385d064 set nand and squashfs features
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41386
2014-06-29 13:09:15 +00:00
Imre Kaloz b2e9df4de3 add uboot-envtools by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41385
2014-06-29 13:06:48 +00:00
Imre Kaloz 974f13988c handle the dual-firmware layout on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41384
2014-06-29 13:03:55 +00:00
Imre Kaloz d59f68531b use the power led on the WRT1900AC for status reporting
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41383
2014-06-29 12:53:09 +00:00
Imre Kaloz 2c06f05236 fixup mac addresses on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41382
2014-06-29 12:51:39 +00:00
Imre Kaloz f953ed4ffb automatically generate network config
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41381
2014-06-29 12:50:12 +00:00
Imre Kaloz 38f596d8f4 update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41379
2014-06-29 11:44:58 +00:00
Imre Kaloz 4fe76889c0 update config for 3.14
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41361
2014-06-27 20:38:42 +00:00
Imre Kaloz 75083c6e68 build squashfs on ubi and SysupgradeNAND images
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41360
2014-06-27 13:00:25 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Luka Perkov cb3d5242ca mvebu: drop preinit script
The /lib/mvebu.sh script can now handle this task.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41341
2014-06-26 10:21:32 +00:00
Imre Kaloz 643a8a626d update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41292
2014-06-20 23:05:23 +00:00
Imre Kaloz f11de38d44 make script executable, add WRT1900AC detection
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41291
2014-06-20 22:35:09 +00:00
Imre Kaloz a241853358 define the power led for the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41288
2014-06-20 19:13:01 +00:00
Luka Perkov 5e6024d526 mvebu: be consistent with kernel config file names
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41240
2014-06-17 21:04:45 +00:00
Imre Kaloz 85812e21f9 add dummy fixup for 3.10
SVN-Revision: 41234
2014-06-17 15:14:02 +00:00
Imre Kaloz ac91824b36 build images for the WRT1900AC
SVN-Revision: 41233
2014-06-17 15:13:33 +00:00
Imre Kaloz d775e4ef00 preliminary support for the WRT1900AC (work in progress)
SVN-Revision: 41232
2014-06-17 15:13:10 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Luka Perkov 4fd88fa081 mvebu: enable NAND controller support
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39569
2014-02-11 02:16:04 +00:00
Luka Perkov 26e8e630ef mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)
This Armada XP GP board from Marvell comes with:

* 2GB DDR3 DIMM
* 1GB NAND flash (8-bit interface)
* 16MB NOR flash (16-bot interrface)
* 16MB SPI flash
* SDIO module
* 3 PCIe
* 1 SATA link
* 2 USB EHCI
* 1 internal SSD
* 4 Ethernet Gigabit
* 1 RS232 port over USB

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39568
2014-02-11 02:07:47 +00:00
Luka Perkov 353b4a98db mvebu: update kernel config
The config-3.10 doesn't specify the configuration of the backported PCI
features, and the Marvell EBU Device Bus Controller, this will prevent
a clean compile. This patch enables these features to archive a clean compile
without having to specify the state of these configuration after starting to
compile.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39567
2014-02-11 02:07:46 +00:00
Luka Perkov c9ae111a20 mvebu: backport mainline patches from kernel 3.13
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13.
This work mainly covers:

* Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family, and the Armada family.
* timer initialization update, and access function for the Armada family.
* Generic IRQ handling backporting.
* Some bug fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39566
2014-02-11 02:07:44 +00:00
Luka Perkov 3af779eb17 mvebu: backport mainline patches from kernel 3.12
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12.
This work mainly covers:

* Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family,and the Armada family.
* Further updates to the mvebu MBus.
* Work and ground work for enabling MSI on the Armada family.
* some phy / mdio bus initialization related work.
* Device tree binding documentation update.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39565
2014-02-11 02:07:41 +00:00
Luka Perkov 69d323f231 mvebu: backport mainline patches from kernel 3.11
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11.
This work mainly covers:

* Enabling USB storage, and PCI to mvebu_defconfig.
* Add support for NOR flash.
* Some PCI device tree related updates, and bus parsing.
* Adding Armada XP & 370 PCI driver, and update some clock gating
  specifics.
* Introduce Marvell EBU Device Bus driver.
* Enaling USB in the armada*.dts.
* Enabling, and updating the mvebu-mbus.
* Some SATA and Ethernet related fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39564
2014-02-11 02:07:38 +00:00
Jonas Gorski 6cf402a41d mvebu: remove forced module config
These should either be disabled or not present in the config, else
they might cause build issues because of unexpected unpackaged
modules, as it is the case for LEDS_CLASS.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39529
2014-02-08 11:47:33 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Luka Perkov a467c52eca mvebu: fix build failures when initramfs is not selected
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39301
2014-01-15 18:38:51 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00