Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.
To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.
Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26680
Add the PC speaker back to the Geos platform.
Add DMI support in BIOS.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26678
For kernel versions newer then 2.6.31 the ext4 module can be used to mount
ext2/3 filesystems.
Building ext2/3 as modules on the other hand breaks using ext4 for mounting ext2
or ext3, which breaks booting from ext2/3 on machines where the ext4 module is
built into the kernel.
SVN-Revision: 26645
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
A class can be forced to use SFQ, and an external classifier added like
this:
config class "Normal"
option avgrate 10
option priority 30
option packetdelay 100
option limitrate 94
# option qdisc "sfq perturb 2"
config class "Normal_up"
# option filter "protocol all flow hash keys src divisor 1024"
config class "Normal_down"
# option filter "protocol all flow hash keys dst divisor 1024"
Using these options, the user needs to load cls_flow before qos-scripts
starts.
I've got more information here:
http://oneitguy.com/blogs/netprince/fair-traffic-sharing-esfq-broken-switching-sfqexternal-classifiers
This has been tested on r23914.
Signed-off-by: Ben Pfountz <netprince<>vt_edu>
SVN-Revision: 26622
Allow a redirect like:
config redirect
option src 'wan'
option dest 'lan'
option src_dport '22001'
option dest_port '22'
option proto 'tcp'
note the absence of the "dest_ip" field, meaning to terminate the connection on the firewall itself.
This patch makes three changes:
(1) moves the conntrack module into the conntrack package (but not any of the conntrack_* helpers).
(2) fixes a bug where the wrong table is used when the "dest_ip" field is absent.
(3) accepts incoming connections on the destination port on the input_ZONE table, but only for DNATted
connections.
In the above example,
ssh -p 22 root@myrouter
would fail from the outside, but:
ssh -p 22001 root@myrouter
would succeed. This is handy if:
(1) you want to avoid ssh probes on your router, or
(2) you want to redirect incoming connections on port 22 to some machine inside your firewall, but
still want to allow firewall access from outside.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26617
These patches were submitted to netdev and will likely be out in 2.6.38.3.
In the meantime, they're needed in 2.6.37.6.
Patch by Philip Prindeville
SVN-Revision: 26616
Felix Fietkau
Daniel Dickinson
Alexandros C. Couloumbis
Lars-Peter Clausen
Jo-Philipp Wich
Vasilis Tsiligiannis