8cbf97e936
Remove old P2812HNUFX dts
...
Remove unused P2812HNUFX board definition.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43988
2015-01-17 07:07:21 +00:00
7f77870c19
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
...
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
b4d2b69c43
lantiq: Add device tree for P2812HNUF1 and P2812HNUF3
...
Add device tree for P2812HNUF1 and P2812HNUF3.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43986
2015-01-17 07:07:06 +00:00
56a54515df
ramips: add i2c pingroup to the pinmux for rt-n14u
...
i2c pins are wired to wps a reset button
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 43985
2015-01-17 07:06:59 +00:00
27b82a7990
ramips: fix default led configuration for rt-n14u
...
use new helper function to generate default led configuration
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 43984
2015-01-17 07:06:51 +00:00
b5f9e5e454
ar71xx: fix board detection for TP-LINK TL-WA860RE
...
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43983
2015-01-17 07:06:45 +00:00
71c8ec020d
bcm53xx: drop hacky patch making bcma init later
...
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43981
2015-01-16 15:59:29 +00:00
3bdf05441a
brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
...
SVN-Revision: 43979
2015-01-16 12:48:27 +00:00
8a103d5c56
mvebu: fixups for the new driver
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
9a8bf84879
mvebu: add the new tlc59116 driver and migrate the Mamba to it
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43975
2015-01-15 13:59:01 +00:00
f1c5232f4d
ar71xx: fix disable_irq() on chained irq handlers
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43974
2015-01-15 12:19:20 +00:00
4f2fe5d7fa
kernel: fix disable_irq() on MIPS CPU IRQs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43973
2015-01-15 12:19:12 +00:00
4ae1e883e8
bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43972
2015-01-14 13:41:05 +00:00
4f06ba0727
malta: copy initramfs images
...
Malta ramdisk images are no longer copied to output due to a recent change.
This change reimplements copying of ramdisk images for Malta builds.
Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>
SVN-Revision: 43970
2015-01-14 12:09:33 +00:00
a72bf9f3d2
mvebu: Switch to the generic mkuimage macro
...
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.
Switch to this implementation.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43969
2015-01-14 11:39:20 +00:00
91b79128dc
mvebu: Replace the padjffs2 call by the generic definition
...
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43968
2015-01-14 11:37:29 +00:00
f59c84c431
bcm53xx: enable earlyprintk on more devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43965
2015-01-14 07:42:48 +00:00
8e95c2c5be
bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43964
2015-01-14 07:03:42 +00:00
55e766d78d
bcm53xx: refresh configs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
bc78885e70
ramips: add missing -Os cflag for mt7621
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43954
2015-01-13 00:34:49 +00:00
acfc6c153b
ramips: use a larger number of rx descriptors on mt7621 to work around rx overrun related packet loss
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43953
2015-01-13 00:34:45 +00:00
05d4b8c79b
ramips: remove interrupt coalescing, it is unnecessary with napi polling and could reduce throughput
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43952
2015-01-13 00:34:38 +00:00
b0a2d7ad0d
now that the driver knows it, use the 88e6172's switch type in the mamba dts
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43945
2015-01-12 09:32:33 +00:00
edacde5042
target/uml: add missing config symbols
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43940
2015-01-11 22:03:06 +00:00
9db3df9d6b
mvsw61xx: track and set per-VLAN port state in STU
...
Since the driver doesn't know anything about (M)STP
we just hard-set the ports to be enabled if they are
part of the VLAN.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43938
2015-01-11 17:20:16 +00:00
0b2cbeca7a
mvsw61xx: clean up and expand register definitions
...
- eliminate MV_CPUPORT; not necessary since we define
the CPU port(s) via Device Tree
- add STU and expand VTU operations
- update register names to match those of 88E61xx rather than
mvswitch's 88E6060
- use more consistent formatting
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43937
2015-01-11 17:20:06 +00:00
1e39f3aef8
mvsw61xx: rework chip recognition
...
Recognizes 88E6171/6172/6176 at the moment.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43936
2015-01-11 17:20:03 +00:00
a1872182bb
mvsw6171: rename to 'mvsw61xx'
...
In preparation for properly supporting switches
beyond the 88E6171.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
b78cddafcc
kernel: update 3.14 to 3.14.28
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43929
2015-01-11 01:28:32 +00:00
884a01d8a4
mcs814x: switch to 3.14 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43927
2015-01-10 20:12:15 +00:00
dd4ee63fa4
mcs814x: add 3.14 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43926
2015-01-10 20:12:02 +00:00
3b523f6780
mcs814x: account for dtb output directory differences
...
3.3 produced *.dtb files in arch/arm/boot/ while 3.14 will produce those
in arch/arm/boot/dts/, adjust the image makefile accordingly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43925
2015-01-10 20:11:18 +00:00
d43997b223
mcs814x: set low_mem feature flag
...
Most of the devices we support have between 16MiB and 32MiB of RAM
available.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43924
2015-01-10 20:11:07 +00:00
cfdb22f0e4
mcs814x: rename config-default to config-3.3
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43923
2015-01-10 20:10:57 +00:00
741e0fd7a1
sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config of generic symbols
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43922
2015-01-10 19:56:30 +00:00
547ab2de5a
ar71xx: fix console string in images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43917
2015-01-10 18:48:14 +00:00
dffaf94d44
imagebuilder: fail with error if the passed profile name does not exist
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43916
2015-01-10 18:19:59 +00:00
3b21b2ae00
adm5120: add experimental 3.14 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43915
2015-01-10 18:10:04 +00:00
c119814b2b
adm5120: move files to files-3.8
...
In preparation for adding new kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43914
2015-01-10 18:08:53 +00:00
3db73fc350
kernel: add missing config symbols for 3.18
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43912
2015-01-10 17:23:55 +00:00
9229b34d92
ar71xx: port wndr3700/3800 to the new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43910
2015-01-10 15:27:07 +00:00
492bcad8ec
ar71xx: port carambola2 to the new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43909
2015-01-10 15:27:00 +00:00
5b0d18093d
ramips: convert mt7621 images to new image building code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43908
2015-01-10 15:26:53 +00:00
e66f1292aa
ramips: simplify mkimage kernel loadaddr/entry handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43906
2015-01-10 15:26:38 +00:00
4685e4f273
sdk: track files with git and use it to implement proper clean targets
...
Initialize a Git repository in the SDK and use git reset / git clean
to rollback any SDK changes with "make clean" or "make dirclean".
This approach is more robust than nuking entire directory trees because
some parts of them might have been shipped with the original archive.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43904
2015-01-10 11:17:02 +00:00
1e0c22507a
sunxi: bump kernel to 3.18 - refresh patches - add bananapro, cubietruck, mele_m9 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43900
2015-01-09 19:35:14 +00:00
48d8bc4f97
ramips: add preliminary Archer C20i support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43898
2015-01-09 15:40:51 +00:00
7f21a92ffa
switch to 3.18
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43893
2015-01-09 12:36:07 +00:00
182bbf60b7
upgrade to 3.18.2
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43892
2015-01-09 12:35:19 +00:00
baad87ae3d
kernel: add SECCOMP to menuconfig
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43888
2015-01-08 21:23:18 +00:00
John Crispin
Rafał Miłecki
Imre Kaloz
Felix Fietkau
Nicolas Thill
Luka Perkov
Florian Fainelli
Zoltan Herpai
Jo-Philipp Wich