Commit Graph

17589 Commits (011798a0defef51b5a2902d81c5fc90b432dbbbc)

Author SHA1 Message Date
Hauke Mehrtens 5c651b029e kernel: fix kmod-rxrpc with kernel 4.9
rxkad will be build into af-rxrpc now and is of type boolean.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-12 13:55:45 +01:00
Martin Blumenstingl 0caffa60af kernel: fix compile error on linux 4.9 with CONFIG_KALLSYMS disabled
Upstream linux commit 7523e4dc5057e "module: use a structure to
encapsulate layout." moves some of the struct module members into a
separate struct module_layout.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2017-02-12 13:55:13 +01:00
Hauke Mehrtens b1c2506a76 kernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
This backports the following fix to our mips IRQ stack patches:
https://patchwork.linux-mips.org/patch/15110/

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-12 01:41:43 +01:00
Hauke Mehrtens 136d4a0656 lantiq: fix section mismatch in PCIe driver
Do not put the probe function into the __init section, but use the normal
section. This fixes a section mismatch warning.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-12 01:29:41 +01:00
Hauke Mehrtens 863e79f8d5 lantiq: add support for kernel 4.9
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch

The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch

The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:44:13 +01:00
Hauke Mehrtens d61a799528 kernel: add missing config option for kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:28:18 +01:00
Hauke Mehrtens 11215fb23c kernel: add rest controller option for kernel 4.9
Deactivate the reset controllers which could be activated on kernel 4.9
by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-02-11 23:28:13 +01:00
Felix Fietkau e9f76f0f46 cns3xxx: clean up patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-11 21:18:42 +01:00
Alberto Bursi 4383c13aee kirkwood: add ZyXEL NSA325 device
This patch add ZyXEL NSA325 2-Bay Media Server

The ZyXEL NSA325 device is a Kirkwood based NAS:

- SoC: Marvell 88F6702 1600Mhz
- SDRAM memory: 512MB DDR2 400Mhz
- Gigabit ethernet: Marvell Alaska
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II ports (internal)
- 2 USB 2.0 ports (back)
- 1 USB 3.0 port (front)
- Fan (fixed speed)
- hardware watchdog in a mcu

Basically a bigger, more powerful version of NSA310,
installation is the same as they share the same flash layout.

A notable difference is that there is a hardware watchdog
in a mcu on the board, which is disabled by default in the LEDE u-boot.
The watchdog is also disabled with a GPIO activation through
raw register change when kwbooting or it would reset the board before
the new uboot was transferred.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-11 21:16:28 +01:00
Alberto Bursi f99178b6c0 kirkwood: cleanup nsa310b mac address extraction
switch nsa310b mac address reading to mtd_get_mac_ascii helper as
it seems the fw_env.config file is created way later than when
network is set up, when I tested I still had that file included
in the image through /files folder.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-02-11 21:16:28 +01:00
Christian Lamparter 9a9f2f97e6 apm821xx: add linux 4.9 apm821xx patches
This patch updates the apm821xx target to use the 4.9 kernel.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2017-02-11 20:57:56 +01:00
David Woodhouse 657418db68 x86: Add configuration back for Traverse Geos
When we merged all the Geode boards into one generic target, the default
network and LED configuration was lost. Put it back.

Fixes: 9e0759ea26 ("x86: merge all geode based subtargets into one")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-11 20:34:07 +01:00
Felix Fietkau e0e5f8ca2f kernel: fix linux 4.9 host tools portability issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-11 19:02:52 +01:00
Tim Harvey 092f2c14bd imx6: move to Linux 4.9 kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-11 15:38:11 +01:00
Felix Fietkau 73ea3c3f9c cns3xxx: add back watchdog support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-11 15:36:35 +01:00
John Crispin 84e784671b kernel: add missing symbols to generic/config-4.9
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-11 06:52:32 +01:00
John Crispin 4bdf3a33ad kernel: fix 304-mips_disable_fpu.patch for v4.9
the function prototype has changed, make the new stub consistent with this
change.

Signed-off-by: John Crispin <john@phrozen.org>
2017-02-11 06:52:32 +01:00
Koen Vandeputte 2c416b1db0 cns3xxx: switch to linux 4.9
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-10 11:05:57 +01:00
Koen Vandeputte 1db4135e32 cns3xxx: add preliminary 4.9 support
Adds preliminary kernel 4.9 support for this target.

- Refreshed/Updated all patches

Added 3 new patches:
- 093 --> Add virtual PCI MMIO mapping
- 230 --> Remove deprecated code
- 240 --> Rework AT24 eeprom code to use the new NVMEM API

Compiled & tested on cns3xxx (gw2388)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-10 11:05:57 +01:00
Felix Fietkau e690280a16 mxs: enable nvmem support
fixes build error due to missing kernel config options

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-10 11:05:57 +01:00
Rafał Miłecki db866154fc kernel: move upstream accepted bcm47xxpart TRX cleanups
Use 0xx prefix for accepted patches.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-10 08:30:16 +01:00
Daniel Gonzalez Cabanelas 41ad9ed13a brcm63xx: Add Observa VH4032N support
Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 22:02:45 +01:00
Felix Fietkau 7096ed58fd kernel: remove kmod packages for bridge, stp, llc and 8021q
Remove CONFIG_VLAN_8021Q overrides for two targets
These features are built into the kernel image for all targets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 14:49:34 +01:00
Jonas Gorski 0127c480bb brcm63xx: Neufbox 6: fix switch by probing through DT
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski 8b741d5cd1 brcm63xx: fix lzma loader for BCM6362
BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Paul Wassi 9d4f8ff4f6 brcm63xx: add support for Pirelli/ADB P.DG AV4202N
This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski 31d5c5bc90 brcm63xx: setup internal switch leds for bcm6368
Setup the GPIO_MODE register bits for used internal switch port leds.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski c7f31b280f brcm63xx: do a full reset phy cycle
Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:44 +01:00
Jonas Gorski dd7079e79a brcm63xx: implement gpio_to_irq for bcm63xx-gpio
Add support for mapping some GPIO lines to IRQs. GPIO to IRQ mappings
were found out through experimentation, helped by having the GPIO as
output still toggling the IRQ input.

Based-on: http://patchwork.ozlabs.org/patch/660534/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Jonas Gorski 94bbd1f057 brcm63xx: fix external interrupts on BCM6318
Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-09 14:30:43 +01:00
Felix Fietkau d826af2cbb build: make <subdir>/install opt-in, use it for target/ only
Fixes buildbot errors on running make target/install or
toolchain/install

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-09 13:51:35 +01:00
Piotr Dymacz f5416b0622 ar71xx: image: drop redundant CONSOLE assignment
Default CONSOLE value for ar71xx target is "ttyS0,115200", so there
is no need to specify the same value in device profiles.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-09 09:45:27 +01:00
Alexey Brodkin aab344d227 arc770: backport upstream fix for unaligned access
This commit reverts 42f3c1f ("arc770: fix broken upstream change")
and simultaneously adds back-ported fix from Linus' tree:
a524c218bc94 ("ARC: [arcompact] brown paper bag bug in unaligned
access delay slot fixup").

Note mentioned patch will appear in stable trees soon as well so
IMHO there's not much sense in adding this separate patch in lede/master branch.
As well as we will get rid of it here in 17.01 once we bump 4.4 kernel here
later down the line.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Jo-Philipp Wich <jo@mein.io>
2017-02-09 09:14:45 +01:00
Claudio Leite 290ca2ba46 ramips: fix AR670W partition alignment
mtdsplit_lzma requires that the rootfs be aligned to a block boundary.
Pad the kernel partition to make this so.

Signed-off-by: Claudio Leite <leitec@gmail.com>
2017-02-09 09:14:45 +01:00
Rafał Miłecki 76eb62e5af kernel: backport bcm47xxsflash support for reading 32 MiB flashes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-09 08:41:23 +01:00
Álvaro Fernández Rojas 48b71a0b07 brcm2708: bcm2708: fix build
buildbot fails to build without regmap, which I couldn't reproduce locally.
Hopefully this fixes it.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 17:43:40 +01:00
Felix Fietkau 412cf4cc51 sdk: add missing change from r3328-f55c29e4c7
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-08 12:01:59 +01:00
Álvaro Fernández Rojas ba9dbc3dd5 brcm2708: add more patches for linux 4.9
Also removes unneeded wireless patches

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 09:59:53 +01:00
Álvaro Fernández Rojas 7ef713c9c4 brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3
64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget
should serve as a stable and compatible 32 bit support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 00:41:51 +01:00
Álvaro Fernández Rojas 77a00027c3 brcm2708: bcm2709: add support for Raspberry Pi 3
This adds support for Raspberry Pi 3 on the bcm2709 subtarget, in order to
keep 32 bit image support when 64 bit support is added on bcm2710 subtarget.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 00:41:48 +01:00
Álvaro Fernández Rojas de1f83097a generic: add missing symbols for linux 4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-08 00:41:09 +01:00
Álvaro Fernández Rojas e9e52761d3 brcm2708: remove duplicated gzip from image generation
Images are now automatically gziped so remove custom image command

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:24 +01:00
Álvaro Fernández Rojas d9d090e520 brcm2708: remove linux 4.4 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:21 +01:00
Álvaro Fernández Rojas ada91d8a24 brcm2708: switch to linux 4.9
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:18 +01:00
Álvaro Fernández Rojas 96aa0c6b0b brcm2708: add linux 4.9 support
Patches from Raspberry Pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.9.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:16 +01:00
Álvaro Fernández Rojas 989a0b4846 generic: add missing kernel symbols
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:00:08 +01:00
Rafał Miłecki 2fd81681f9 bcm53xx: include Broadcom PHY driver in the kernel
Initial idea was to use package with this PHY driver for devices that
need it. Unfortunately this can't work as bgmac is built-in and PHY
probing happens before loading modules - it results in PHY subsystem
picking default (generic) PHY driver.

There were two ways of solving this:
1) Making bcm53xx use bgmac as module
xor
2) Built-in Broadcom PHY driver

After some quick discussion it seems we can simply built-in the driver
as increased kenel size is relatively small (1805 B).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 18:11:17 +01:00
Felix Fietkau 83ab1982b4 x86: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-07 17:30:39 +01:00
Felix Fietkau 92bda4ae5c x86: switch to Linux 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-07 17:30:35 +01:00
Rafał Miłecki 174ce4c56d kernel: update spi-nor in 4.9 to spi-nor tree version (next branch)
These are patches queued for 4.11. It adds support for even more hw and
removes some annoying WARN_ONCE.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 15:35:39 +01:00
Rafał Miłecki 6d5419d96a kernel: update spi-nor in 4.9 to version from Linus's tree (4.10)
This adds support for more devices.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 15:35:39 +01:00
Rafał Miłecki ec10bb18f5 bcm53xx: add missing system.sh include
It's needed for macaddr_add.

Fixes: 50efd403e6 ("bcm53xx: set WAN MAC address to don't share one with LAN interface")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-07 11:47:02 +01:00
Koen Vandeputte 4339e5ddb1 kernel: fix build error in mtdsplit driver
Add missing parentheses.
Fixes kernel build issue when using this driver.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-07 11:39:11 +01:00
Koen Vandeputte 597ea08038 cns3xxx: use proper macro's for ID handling
Compiled & tested on cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-07 11:39:08 +01:00
Jo-Philipp Wich ea269c37b8 ar71xx/ipq806x/mediatek/mvebu: fix network defaults
After "73d923e base-files: emit tagged switch configuration by default"
some default network configurations are broken because the lan and wan
ifnames are forcibly set to untagged netdevs.

Adjust the offending set_interfaces_lan_wan() calls to use the proper
tagged device names.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-07 09:32:28 +01:00
Jo-Philipp Wich 62bf0d4958 arc770: fix broken upstream change
Add a patch to revert upstream commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4
which introduces syntax errors.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-07 09:32:02 +01:00
Álvaro Fernández Rojas dab5a44067 brcm2708: update linux 4.4 patches to latest version
n
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-06 22:24:42 +01:00
Rafał Miłecki 6b01f0f196 bcm53xx: set Netgear R8000 USB LEDs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 20:24:19 +01:00
Rafał Miłecki fb18c3c8ff bcm53xx: refresh Linux 4.4 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 17:21:09 +01:00
Rafał Miłecki f24cb34239 bcm53xx: image: use one style of adding TARGET_DEVICES entries
It just makes code consistent. This trivial change may be a 17.01
candidate to provide simpler backporting experience.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 13:59:30 +01:00
Rafał Miłecki e991b0d741 kernel: merge b53 API patch with the one handling all switch drivers
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 13:39:45 +01:00
Felix Fietkau 91fce81df6 kernel: add missing config symbols for 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 11:56:57 +01:00
Felix Fietkau 478be1d371 kernel: fix crashlog build error on 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 11:56:57 +01:00
Felix Fietkau 9c18235b3a kernel: add compile fix for linux 4.9 on x86
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-06 11:56:57 +01:00
Rafał Miłecki b008357960 kernel: port b53 to use kernel 4.5+ API
For backward 4.4 compatibility I added patch reverting my changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 11:28:54 +01:00
Rafał Miłecki 26bc05eda9 bcm53xx: move bcm47xx_sprom driver to 4.4 specific directory
In kernel 4.9 it's already present so we don't want to overwite it (with
older & API incompatible version).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:18:20 +01:00
Rafał Miłecki 2252627b0e bcm53xx: add Linux 4.9 patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 10:08:39 +01:00
Rafał Miłecki 75d48d80c7 bcm53xx: backport upstream DTS files for Linksys devices
We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-06 08:49:23 +01:00
Stijn Tintel d2c4041f02 kernel: update kernel 4.4 to version 4.4.47
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked
broken, except arc770 and arch38 due to broken toolchain.

Runtime-tested on ar71xx, octeon, ramips and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-02-06 03:23:06 +01:00
Kristian Evensen bb7068f26c ramips: add support for Sanlinking D240
The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.

Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.

Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.

The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).

If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-02-05 22:23:28 +01:00
Felix Fietkau f791fb4af4 kernel: add linux 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Tim Harvey <tharvey@gateworks.com> [fixes]
2017-02-04 20:28:14 +01:00
Joseph C. Lehner 7d00cfe9bb build: centralize fakeroot code
This patch moves the fakeroot code required by some devices to
`image-commands.mk`.

Create the fakeroot on the fly by using the undocumented -s (skip copy)
parameter of mkimage.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
[remove unused NETGEAR_KERNEL_MAGIC, remove workarounds to have a dummy
rootfs for mkimage]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Mathias Kresin c1eae7a7b8 ramips: fix Airlink AR725W device title
Gemtek is the ODM but the board was sold by Airlink101.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Mathias Kresin 1ba7fa652c ramips: fix Airlink AR725W factory image build
The factory image can't be bigger than 3328 KByte. If the image is
bigger than that, the gemtek-header tool throws an error and breaks
the build.

Make sure the output file to which the gemtek header should be added
exists and wasn't removed during the check-size step because of it
size. This will prevent hard errors in case the factory image is to big
similar to what is done for sysupgrade images.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 13:46:48 +01:00
Hannu Nyman c980147527 ipq806x: fix wireless macs
Commit 71a39b8 ("ipq806x: Fix wireless support for Netgear Nighthawk X4S
D7800") added a trailing TAB char after the backslash which prevents
the assignment of the correct MACs for wifi devices.

Fixes: FS#451

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 19:31:45 +01:00
Felix Fietkau 1a52d11d38 kernel: update phy drivers for 4.9
add backport patches for older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-03 12:35:44 +01:00
Felix Fietkau 402193baa1 kernel: update mtdsplit for linux 4.9
add backport patches for older kernels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-03 12:35:44 +01:00
Rafał Miłecki 50efd403e6 bcm53xx: set WAN MAC address to don't share one with LAN interface
After analyzing numerous NVRAMs and vendor firmwares it seems the base
MAC address is used for LAN interface. WAN interface has different one
which sometimes is set directly in NVRAM and sometines needs to be
calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-03 07:50:59 +01:00
Piotr Dymacz a4d12aed30 ar71xx: image: fix DEVICE_TITLE for several devices
Be consistent with form and format of the vendor names.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz c3ef8daff4 ar71xx: fix indentation in Kconfig.openwrt
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz cc1fb9662c ar71xx: drop help sections from Kconfig.openwrt
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz bed9729587 ar71xx: fix up mikrotik subtarget kernel config
Disable all devices which do not belong to the mikrotik subtarget.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz 670e14ed70 ar71xx: fix up nand subtarget kernel config
Disable all devices which do not belong to the nand subtarget.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Piotr Dymacz 4fe92554ac ar71xx: select ATH79_NVRAM only by boards actually use it
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-03 05:10:14 +01:00
Giuseppe Lippolis f9f636b94e rt5350: added pcm interface in .dtsi
Added the missing audio pcm interface in the .dtsi file for the rt5350
device. The update has been verified from the data get from the datasheet
and is very similar to the mt7620a.dtsi

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2017-02-03 05:10:13 +01:00
Mathias Kresin a0888ecbaf generic: rtl8366rb: fix compatible string
Use a vendor prefix as it has to be for all not core driver. Update the
compatible string in the device tree files accordingly.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:46:03 +01:00
Mathias Kresin 2c4d81310f ramips: fix Sercomm NA930 compatible string
The Sercomm NA930 is not a mt7620a evaluation board and shouldn't use
the eval board compatible string.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:46:03 +01:00
Mathias Kresin 2281f9929b ramips: remove Planex CS-QR10 sound device tree node
The comptible string is neither added by any LEDE patch nor exists in
in the kernel. Drop the sound node which was obviously added
accidentally with 9195d8da ("ramips: DTS rework").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-03 00:45:55 +01:00
Mathias Kresin 05b1fcc70b ramips: cleanup SPI flash device tree properties usage
Use only the jedec,spi-nor compatible string. Everything else either
never worked or is only support to keep compatibility.

Remove the linux,modalias property. It is obsolete since kernel 4.4.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-02 22:48:54 +01:00
André Valentin 063d5a61e5 generic: mtd: update settings of mx25u3235f
This patch enabled 4K, dual and quad read. Settings have been verified with
a real device.

Signed-off-by: André Valentin <avalentin@marcant.net>
2017-02-02 22:48:54 +01:00
André Valentin 8725d1cffa ipq806x: fixup nbg6817 internal mmc and switch configuration in DTS
The setting mmc-ddr-1_8v in the platform dts leads to read errors. The
device is unusable and system reboots in a loop. Because NBG6817 is the
only mmc device, I removed it in base dts.

The second change removes settings now present in base dts.

The third change references was a wrong conversion of constants in the switch settings.
Switch now initializes again.

Signed-off-by: André Valentin <avalentin@marcant.net>
2017-02-02 22:48:33 +01:00
Koen Vandeputte 3becadd56c kernel: bump to 4.4.46
Refreshed patches for all supported targets.

Compile-tested on ar71xx, cns3xxx, imx6, mt7621, oxnas and x86/64.
Run-tested on ar71xx, cns3xxx, imx6 and mt7621.

Tested-by: Stijn Segers <francesco.borromini@inventati.org>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-02-02 20:59:57 +01:00
Tobias Wolf bf2f09c005 ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x)
This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and
configures the F5D8235 V1 target to use append-dtb for kernel creation
instead of OWRTDTB.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Tobias Wolf 4f86692953 ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to arch/mips/ralink
This commit introduces CONFIG_MIPS_APPENDED_RAW_DTB as an alternative to
OWRTDTB. Both solutions can be used concurrently until all board
configurations have been changed.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Jo-Philipp Wich 770ac77cce brcm63xx: board.d: request untagged switch config where applicable
In order to prepare support for generating tagged switch configurations by
default, explicitely request untagged configs for boards which do not already
request tagging to retain default behaviour.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Jo-Philipp Wich 0d1765b4ba imagebuilder: make submake invocations less verbose
Use silent make invocations for sub-makes like build_image or checksum to
avoid bloating the IB output with non-status info.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Rafał Miłecki 49f9c06fde kernel: fix BCM54612E PHY support
This backports upstream commit 62e13097c46c ("net: phy: broadcom: rehook
BCM54612E specific init")

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-01 20:55:22 +01:00
Felix Fietkau dabdd123c9 mt76: update to the latest version
Uses upstream code to parse DT supported band/frequency information.
Update existing .dts files to the new format and remove unnecessary
overrides.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:55 +01:00
Felix Fietkau 2340de62a6 ramips: remove DT pcie nodes for GL-MT300A/N
These devices don't have a secondary wifi chip

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:54 +01:00
Felix Fietkau 0f19c1d6cf rtl8366_smi: add linux 4.4 compatibility
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:54 +01:00
Felix Fietkau 71e86199ff lantiq: enable SMP for XRX200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-01 17:49:01 +01:00
Rafał Miłecki 58221d79d9 bcm53xx: fix LAN MAC address for devices that use eth2 originally
We override default Ethernet interface with eth0 which often uses random
MAC due to missing proper NVRAM entry. Fix this by manually assigning
MAC in the config.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-01 15:26:40 +01:00
Mathias Kresin 726e45dfe9 mvebu: fix usb port leds
All mvebu boards have three USB LEDs. The first one is used for the
USB1 port.

There are two LEDs related to the second USB port. The top (bar) LED
gets bright in case any USB device is connected to the second USB port.

If the connected device is an USB 3 (SuperSpeed) device, the small dot
LED bellow the "bar" LED gets also bright.

While at it, use a name for the USB LEDs that matches the names printed
on the case.

Fixes: FS#423, FS#425

Signed-off-by: Kabuli Chana <newtownbuild@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-01 07:46:50 +01:00
Rafał Miłecki 6a853776a5 kernel: backport bgmac support for external PHYs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 22:04:08 +01:00
Rafał Miłecki bde06ab26b kernel: use upstream accepted bgmac fix for BCM47186B0
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 22:04:08 +01:00
Rafał Miłecki 7583de2e8f kernel: rename bgmac patches to squeeze them
This is a pure rename without any changes. It makes maintaining bgmac
simpler and will hopefully make adding new kernel a bit easier.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 22:04:08 +01:00
Rafał Miłecki 12288d450b kernel: update bcma to fix devm memory leaks
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 14:31:13 +01:00
FUKAUMI Naoki 6b0b526a4f ramips: add support for Buffalo WCR-1166DS
Buffalo WCR-1166DS is a small wireless router with

 - MT7628AN + MT7612E
 - 64MiB DDR2 SDRAM
 - 16MiB SPI flash
 - 2T2R 11ac/a/b/g/n Wi-Fi
 - 2x 10/100M ethernet switch
 - 8x programmable LED
 - 3x button
 - UART pad on PCB (J2: 3.3V, GND, TX, RX)

factory image can be installed via stock web UI.

due to the "dual image" function in the bootloader, the second half of
the SPI flash ("firmware2" partition) cannot be used as a part of the
file system.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-31 11:10:58 +01:00
FUKAUMI Naoki 3b5d29b96e bcm53xx: build factory images for WZR-900DHP series
only factory images for DHP-EU and DHP2-JP (fw ver. 2.x) are built.

this will not work for DHP-JP/AP/TW (fw ver. 1.x) because they use
different buffalo_csum() formula.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-31 11:10:53 +01:00
Felix Fietkau bc32f7deb5 ramips: add missing DTS pcie node for WSR-600
Enables PCI bus and support for the MT7603 and RT5592 chips

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-31 10:27:38 +01:00
Felix Fietkau 727e244fae bcm53xx: suppress osafeloader info error messages during flashing
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-30 13:00:11 +01:00
Alexander Couzens 2711b94932 lantiq: fix unaligned access in xrx200_poll_rx()
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-01-30 10:14:14 +01:00
Sergey Sergeev 74ea99b01d ledtrig-netdev: don't cancel work on events for different interfaces
This fixes logic bug(in function netdev_trig_notify) introduced in
0b2991a8ed commit.
Events triggered by different interfaces were stopping work queue so it
wasn't working for tx/rx mode.

Signed-off-by: Sergey Sergeev <adron@yapic.net>
2017-01-29 17:32:58 +01:00
Felix Fietkau 1533f1db92 ar71xx: add missing DEVICE_TITLE for mikrotik devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-29 17:32:48 +01:00
FUKAUMI Naoki e5a0eb2af5 ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2
"pad-rootfs" is required just after "append-rootfs".

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-28 20:29:00 +01:00
Michael Heimpold 8af38c7001 mxs: remove stale references to obsolete kernel module packages
Commit 29443e2 (mxs: remove modules.mk, select drivers in the kernel config)
missed to remove these references, so cleanup it now.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2017-01-28 20:29:00 +01:00
Rafał Miłecki 5a164dd3c0 kernel: make BCM54210E PHY code work with 4.4
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-28 17:15:25 +01:00
Rafał Miłecki c437df09c9 kernel: backport BCM54210E PHY support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-28 17:09:13 +01:00
Mathias Kresin 271db9f18e lantiq: fix brnImage signature for the VGV7510KW22BRN images
The VGV7510KW22BRN and VGV7519BRN do not have the same brnImage
signature. It was accidentally changed with ba42c1d ("lantiq: un-macro
the image building code").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-28 12:44:41 +01:00
Koen Vandeputte 4d1515070b kernel: bump to 4.4.45
Refreshed patches for all supported targets.

Compiled & tested on cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 23:17:49 +01:00
Mathias Kresin 893962bcf8 Revert "ar71xx: fix Archer C7 LED colour names"
This reverts commit e79ecb4c26.

The commit was incomplete and the issue that should be fixed isn't
that easy fixable. The Archer C7 mach file is used for the Archer C5,
WDR4900 and WDR7500 as well. Where the WDRs in compare to the Archer
do have blue LEDs.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-27 22:16:24 +01:00
Jo-Philipp Wich 475da81ec0 ixp4xx: put apex images into image staging directory
Do not put the apex images into the kernel build directory as this directory
might get removed after kernel updates while the apex packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich e0579aecf8 mxs: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich 7f9d537f21 oxnas: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich cf3d1b61bf sunxi: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich c6502ce3bb layerscape: put u-boot and ucode images into image staging directory
Do not put the u-boot and ucode images into the kernel build directory as this
directory might get removed after kernel updates while the u-boot packages
InstallDev recipe is not getting re-executed because it is still considered
current, leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich 237bd36135 mvebu: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing u-boot images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Jo-Philipp Wich 7d57db4d9b build: introduce STAGING_DIR_IMAGE
Introduce a new location STAGING_DIR_IMAGE which is intended to be used by
bootloader iamges and similar image-related artifacts.

This directory is guaranteed to be persistent across kernel upgrades which
might involve a removal of KERNEL_BUILD_DIR and is guranteed to be bundled
with the image builder.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Koen Vandeputte 6db7a013bd imx6: fix build error
This symbol is required when symbol SOC_IMX6 is also specified

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 16:51:44 +01:00
Koen Vandeputte d99007d5a9 imx6: refresh kernel config
This key got moved to generic in commit:
7480d3309c

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 16:11:34 +01:00
Felix Fietkau 7d985f0925 kernel: split up 980-arm_openwrt_machtypes.patch and move to target folders
This is only required for non-DT platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-27 11:18:27 +01:00
Stijn Segers 20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00
Chris Blake e3271d545d x86/64: Enable GPIO sysfs & GPIO LED support
The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-27 11:18:27 +01:00
Joseph C. Lehner f93a121533 ramips: cleanup mt7620 Netgear image code
1. Reuse functions defined in `image-commands.mk`
2. Rename fakeroot image

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-27 11:10:10 +01:00
Joseph C. Lehner aeba0fe466 build: move append-file to image-commands.mk
Move it append-file to image-commands.mk so that it can used by other
targets as well.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-27 11:10:10 +01:00
Tobias Wolf 99eb6f97e5 ramips: enable rlt8366s Green Feature for F5D8235 V1
Enable the green feature for the board by default.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Tobias Wolf e2bd8b900f generic: rtl836x: add support for Green Feature
The GPL licensed source code of Belkin contains an ASIC based "Green
Feature". This change adds support for this Green Feature that can be
activated with an DTS option or swconfig.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Tobias Wolf d43046e0f6 ramips: add rlt8366s initvals to the F5D8235 V1 DTS
Before this change only port 4 of F5D8235 V1 worked at 1000Mpbs.

Comparing the current driver with the GPL_BELKIN_F5D8235-4_v1000
v1.01.24 sources showed that additional steps are required to set-up
the rlt8366s switch correctly.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Tobias Wolf 30494598f8 generic: rtl8366s: add support support for initvals from DTS
This change provides the possibility to define per-device initvals in
the DTS file for a rlt8366s switch.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2017-01-27 11:10:10 +01:00
Mathias Kresin e79ecb4c26 ar71xx: fix Archer C7 LED colour names
All LEDs on this board are green.

Fixes: FS#409

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-27 11:10:10 +01:00
Yousong Zhou d5de9264bb generic: keep module aliases inside .modinfo
It seems module aliases are actually essential info.  E.g. other modules
may call xt_request_find_match(NFPROTO_IPV{4,6}, "hashlimit", 1) and the
kernel will request user mode modprobe helper for ipt_hashlimit and
ip6t_hashlimit respectively which are aliases of xt_hashlimit.ko

Compile-tested for armvirt, there is nearly no size impact.

Before

    -rw-r--r-- 1 yousong yousong     304 Jan 10 17:37 config.seed
    -rw-r--r-- 1 yousong yousong    1634 Jan 11 11:07 lede-armvirt-default.manifest
    -rw-r--r-- 1 yousong yousong 1533647 Jan 11 11:07 lede-armvirt-default-rootfs.tar.gz
    -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:07 lede-armvirt-root.ext4.gz
    -rw-r--r-- 1 yousong yousong 1544597 Jan 11 11:07 lede-armvirt-rootfs.cpio.gz
    -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:07 lede-armvirt-root.squashfs.gz
    -rwxr-xr-x 1 yousong yousong 1654712 Jan 11 11:07 lede-armvirt-zImage
    -rwxr-xr-x 1 yousong yousong 2738296 Jan 11 11:07 lede-armvirt-zImage-initramfs
    drwxr-xr-x 2 yousong yousong    4096 Jan 10 17:35 packages
    -rw-r--r-- 1 yousong yousong     739 Jan 10 17:37 sha256sums

After

    -rw-r--r-- 1 yousong yousong     304 Jan 10 17:37 config.seed
    -rw-r--r-- 1 yousong yousong    1634 Jan 11 11:10 lede-armvirt-default.manifest
    -rw-r--r-- 1 yousong yousong 1533646 Jan 11 11:10 lede-armvirt-default-rootfs.tar.gz
    -rw-r--r-- 1 yousong yousong 1802711 Jan 11 11:10 lede-armvirt-root.ext4.gz
    -rw-r--r-- 1 yousong yousong 1544593 Jan 11 11:10 lede-armvirt-rootfs.cpio.gz
    -rw-r--r-- 1 yousong yousong 1174984 Jan 11 11:10 lede-armvirt-root.squashfs.gz
    -rwxr-xr-x 1 yousong yousong 1654736 Jan 11 11:10 lede-armvirt-zImage
    -rwxr-xr-x 1 yousong yousong 2738144 Jan 11 11:10 lede-armvirt-zImage-initramfs
    drwxr-xr-x 2 yousong yousong    4096 Jan 10 17:35 packages
    -rw-r--r-- 1 yousong yousong     739 Jan 10 17:37 sha256sums

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-26 18:07:38 +01:00
Vitaly Chekryzhev 9a53e1bdf9 ramips: ZyXEL Keenetic Omni/Omni2: export gpio usb power
Export gpio usb to allow power management of USB port.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-26 16:39:08 +01:00
Vitaly Chekryzhev 0352cc6b19 ramips: ZyXEL Keenetic Viva: align factory images
ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-26 16:39:08 +01:00
Vitaly Chekryzhev e8c265b2cc ramips: ZyXEL Keenetic Viva: export gpio usb power
Export gpio usb to allow power management of USB port.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2017-01-26 16:39:08 +01:00
Yo Abe 21b4625135 ramips: add ip17xx support to WLI-TX4-AG300N
ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which
should be included by default.

Signed-off-by: Yo Abe <abe.geel@gmail.com>
[Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 14:41:31 +01:00
Joseph C. Lehner 0cc04d05f6 ramips: fix EX2700 wireless mac
On some EX2700 devices, the MAC address from the eeprom data differs
from the actual MAC address. Fix that, and cleanup the DTS file
while we're at it.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-26 13:53:57 +01:00
Rafał Miłecki f67b0276b6 kernel: update Broadcom PHY drivers
This commit adds 4 patches, one per kernel version that was used for
picking updates. This adds support for few new PHYs.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-26 12:24:09 +01:00
Henryk Heisig e39dc8d823 ar71xx: add support to TP-Link Archer C59v1 and C60v1
TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- 8x LED (controled by 74HC595), 3x button
- UART header on PCB

TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros
QCA9561+QCA9886.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Currently not working:
- Port LAN1 on C59, LAN4 on C60
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
- Update from oficial web interface ( tplink-saveloader not support "product-info")

Flash instruction:
1. Set PC to fixed ip address 192.168.0.66
2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f020000 +$filesize
3. cp.b $fileaddr 0x9f020000 $filesize
4. reset

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 11:38:21 +01:00
Henryk Heisig eec0c41375 ar71xx: QCA956X: add missing register
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-01-26 11:38:20 +01:00
Qian Zheng b822f29f25 ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mapping
Signed-off-by: Qian Zheng <sotux82@gmail.com>
2017-01-26 11:38:20 +01:00