hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ar71xx: Hornet UB GPIO WPS/Reset 

This problem has existed at least since Attitude Adjustment and
is also present in trunk. Basically on the Hornet-UB board the
functionality of RESET and WPS have "switched places".

There are two tickets about the issue at dev.openwrt.org,
The solution suggested on them both is incomplete though
and introduces the following proglem:

Patching as suggested on #14136/#15282 will result in a situation
where simply pressing the RESET button on the bottom will cause
FACTORY RESET to be run. This is due to GPIO high/low state being
incorrect as a result of the above change and virtually the RESET
button is in the pressed-down state the entire time. When it is
then physically pressed, that causes the opposite, release, to be
triggered and since to the board it seemed that the button was
pressed long before it was released, the FACTORY RESET results.

The attached patch works as expected. I have verified both the
incorrect functionality as well as after fixing the issue as
described in the patch and flashing the resulting firmware to a
Hornet-UB board.

Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>

SVN-Revision: 44692
owl
John Crispin 2015-03-12 10:06:42 +00:00
parent 835b17c333
commit fd82ffec00
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c
View File

@ -28,8 +28,8 @@
#define HORNET_UB_GPIO_LED_WAN 17 #define HORNET_UB_GPIO_LED_WAN 17
#define HORNET_UB_GPIO_LED_WPS 27 #define HORNET_UB_GPIO_LED_WPS 27
#define HORNET_UB_GPIO_BTN_RESET 11 #define HORNET_UB_GPIO_BTN_RESET 12
#define HORNET_UB_GPIO_BTN_WPS 12 #define HORNET_UB_GPIO_BTN_WPS 11
#define HORNET_UB_GPIO_USB_POWER 26 #define HORNET_UB_GPIO_USB_POWER 26
@ -64,7 +64,7 @@ static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
{ {
.name = "alfa:blue:wps", .name = "alfa:blue:wps",
.gpio = HORNET_UB_GPIO_LED_WPS, .gpio = HORNET_UB_GPIO_LED_WPS,
.active_low = 1, .active_low = 0,
}, },
}; };
@ -75,7 +75,7 @@ static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
.code = KEY_WPS_BUTTON, .code = KEY_WPS_BUTTON,
.debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
.gpio = HORNET_UB_GPIO_BTN_WPS, .gpio = HORNET_UB_GPIO_BTN_WPS,
.active_low = 1, .active_low = 0,
}, },
{ {
.desc = "Reset button", .desc = "Reset button",
@ -83,7 +83,7 @@ static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
.code = KEY_RESTART, .code = KEY_RESTART,
.debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL, .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
.gpio = HORNET_UB_GPIO_BTN_RESET, .gpio = HORNET_UB_GPIO_BTN_RESET,
.active_low = 0, .active_low = 1,
} }
}; };