openwrt-owl/target/linux/ar71xx/generic/profiles/d-link.mk

#
# Copyright (C) 2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

define Profile/DIR505A1
	NAME:=D-Link DIR-505 rev. A1
	PACKAGES:=
endef

define Profile/DIR505A1/Description
	Package set optimized for the D-Link DIR-505 rev. A1.
endef

$(eval $(call Profile,DIR505A1))

define Profile/DIR600A1
	NAME:=D-Link DIR-600 rev. A1
	PACKAGES:=
endef

define Profile/DIR600A1/Description
	Package set optimized for the D-Link DIR-600 rev. A1.
endef

$(eval $(call Profile,DIR600A1))

define Profile/DIR601A1
	NAME:=D-Link DIR-601 rev. A1
	PACKAGES:=
endef

define Profile/DIR601A1/Description
	Package set optimized for the D-Link DIR-601 rev. A1.
endef

$(eval $(call Profile,DIR601A1))

define Profile/DIR601B1
	NAME:=D-Link DIR-601 rev. B1
	PACKAGES:=
endef

define Profile/DIR601B1/Description
	Package set optimized for the D-Link DIR-601 rev. B1.
endef

$(eval $(call Profile,DIR601B1))

define Profile/DIR615C1
	NAME:=D-Link DIR-615 rev. C1
	PACKAGES:=
endef

define Profile/DIR615C1/Description
	Package set optimized for the D-Link DIR-615 rev. C1.
endef

$(eval $(call Profile,DIR615C1))


define Profile/DIR615E4
	NAME:=D-Link DIR-615 rev. E4
	PACKAGES:=
endef

define Profile/DIR615E4/Description
	Package set optimized for the D-Link DIR-615 rev. E4.
endef

$(eval $(call Profile,DIR615E4))


define Profile/DIR825B1
	NAME:=D-Link DIR-825 rev. B1
	PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev
endef

define Profile/DIR825B1/Description
	Package set optimized for the D-Link DIR-825 rev. B1.
endef

$(eval $(call Profile,DIR825B1))

define Profile/DIR825C1
	NAME:=D-Link DIR-825 rev. C1
	PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
endef

define Profile/DIR825C1/Description
	Package set optimized for the D-Link DIR-825 rev. C1.
endef

$(eval $(call Profile,DIR825C1))

define Profile/DIR835A1
	NAME:=D-Link DIR-835 rev. A1
	PACKAGES:=kmod-usb-core kmod-usb2
endef

define Profile/DIR835A1/Description
	Package set optimized for the D-Link DIR-835 rev. A1.
endef

$(eval $(call Profile,DIR835A1))
add initial profiles SVN-Revision: 14693 2009-02-28 17:47:33 +00:00			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`
			`# This is free software, licensed under the GNU General Public License v2.`
			`# See /LICENSE for more information.`
			`#`

ar71xx: add support for dir 505 a1 this patch is based on ... -> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37703 2013-08-05 10:41:48 +00:00			`define Profile/DIR505A1`
			`NAME:=D-Link DIR-505 rev. A1`
			`PACKAGES:=`
			`endef`

			`define Profile/DIR505A1/Description`
			`Package set optimized for the D-Link DIR-505 rev. A1.`
			`endef`

			`$(eval $(call Profile,DIR505A1))`

ar71xx: add support for the D-Link DIR-600 rev. A1 board SVN-Revision: 19100 2010-01-11 08:02:10 +00:00			`define Profile/DIR600A1`
			`NAME:=D-Link DIR-600 rev. A1`
ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) SVN-Revision: 28173 2011-09-05 18:37:48 +00:00			`PACKAGES:=`
ar71xx: add support for the D-Link DIR-600 rev. A1 board SVN-Revision: 19100 2010-01-11 08:02:10 +00:00			`endef`

			`define Profile/DIR600A1/Description`
			`Package set optimized for the D-Link DIR-600 rev. A1.`
			`endef`

			`$(eval $(call Profile,DIR600A1))`

d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600 SVN-Revision: 30570 2012-02-16 07:38:33 +00:00			`define Profile/DIR601A1`
			`NAME:=D-Link DIR-601 rev. A1`
			`PACKAGES:=`
			`endef`

			`define Profile/DIR601A1/Description`
			`Package set optimized for the D-Link DIR-601 rev. A1.`
			`endef`

			`$(eval $(call Profile,DIR601A1))`

ar71xx: add profile and build image for the DIR-601-B1 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36786 2013-05-30 16:19:30 +00:00			`define Profile/DIR601B1`
			`NAME:=D-Link DIR-601 rev. B1`
			`PACKAGES:=`
			`endef`

			`define Profile/DIR601B1/Description`
			`Package set optimized for the D-Link DIR-601 rev. B1.`
			`endef`

			`$(eval $(call Profile,DIR601B1))`

add initial profiles SVN-Revision: 14693 2009-02-28 17:47:33 +00:00			`define Profile/DIR615C1`
			`NAME:=D-Link DIR-615 rev. C1`
ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) SVN-Revision: 28173 2011-09-05 18:37:48 +00:00			`PACKAGES:=`
add initial profiles SVN-Revision: 14693 2009-02-28 17:47:33 +00:00			`endef`

			`define Profile/DIR615C1/Description`
			`Package set optimized for the D-Link DIR-615 rev. C1.`
			`endef`

			`$(eval $(call Profile,DIR615C1))`
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater) SVN-Revision: 18621 2009-12-03 15:07:34 +00:00

ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com> SVN-Revision: 29973 2012-01-31 18:37:09 +00:00			`define Profile/DIR615E4`
			`NAME:=D-Link DIR-615 rev. E4`
			`PACKAGES:=`
			`endef`

			`define Profile/DIR615E4/Description`
			`Package set optimized for the D-Link DIR-615 rev. E4.`
			`endef`

			`$(eval $(call Profile,DIR615E4))`


ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater) SVN-Revision: 18621 2009-12-03 15:07:34 +00:00			`define Profile/DIR825B1`
			`NAME:=D-Link DIR-825 rev. B1`
ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) SVN-Revision: 28173 2011-09-05 18:37:48 +00:00			`PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev`
ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to ValXdater) SVN-Revision: 18621 2009-12-03 15:07:34 +00:00			`endef`

			`define Profile/DIR825B1/Description`
			`Package set optimized for the D-Link DIR-825 rev. B1.`
dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images). SVN-Revision: 33447 2012-09-17 14:17:12 +00:00			`endef`

			`$(eval $(call Profile,DIR825B1))`
ar71xx: add profile and build image for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35403 2013-01-29 22:50:57 +00:00
			`define Profile/DIR825C1`
			`NAME:=D-Link DIR-825 rev. C1`
ar71xx: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35629 2013-02-16 17:33:06 +00:00			`PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev`
ar71xx: add profile and build image for dir-825-c1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35403 2013-01-29 22:50:57 +00:00			`endef`

			`define Profile/DIR825C1/Description`
			`Package set optimized for the D-Link DIR-825 rev. C1.`
			`endef`

			`$(eval $(call Profile,DIR825C1))`
ar71xx: add profile support for dir-835-a1 Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at> Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35959 2013-03-11 15:55:17 +00:00
			`define Profile/DIR835A1`
			`NAME:=D-Link DIR-835 rev. A1`
			`PACKAGES:=kmod-usb-core kmod-usb2`
			`endef`

			`define Profile/DIR835A1/Description`
			`Package set optimized for the D-Link DIR-835 rev. A1.`
			`endef`

			`$(eval $(call Profile,DIR835A1))`